bq24190_charger: Add support for TI BQ24190 Battery Charger

Add driver support for the Texas Instruments BQ24190 battery charger.
Some of the information provided by the device is about the charger and
other information is about the battery so create two power_supply objects
(one for each) and provide the appropriate information for each one.

The device has many fields that go beyond what is reasonable to report or
modify using the existing 'POWER_SUPPLY_PROP_*' properties so the driver
exports the register fields via sysfs.  They are prefixed by 'f_' (for
'field') to make it easier to distinguish between a register field and a
"normal" sysfs file exported by the power_supply infrastructure.

Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>

1 files changed, 1546 insertions, 0 deletions

diff --git a/drivers/power/bq24190_charger.c b/drivers/power/bq24190_charger.c
new file mode 100644
index 000000000000..2b0f0e0b58a2
--- /dev/null
+++ b/drivers/power/bq24190_charger.c
@@ -0,0 +1,1546 @@
+/*
+ * Driver for the TI bq24190 battery charger.
+ *
+ * Author: Mark A. Greer <mgreer@animalcreek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/power_supply.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+
+#include <linux/power/bq24190_charger.h>
+
+
+#define	BQ24190_MANUFACTURER	"Texas Instruments"
+
+#define BQ24190_REG_ISC		0x00 /* Input Source Control */
+#define BQ24190_REG_ISC_EN_HIZ_MASK		BIT(7)
+#define BQ24190_REG_ISC_EN_HIZ_SHIFT		7
+#define BQ24190_REG_ISC_VINDPM_MASK		(BIT(6) | BIT(5) | BIT(4) | \
+						 BIT(3))
+#define BQ24190_REG_ISC_VINDPM_SHIFT		3
+#define BQ24190_REG_ISC_IINLIM_MASK		(BIT(2) | BIT(1) | BIT(0))
+#define BQ24190_REG_ISC_IINLIM_SHIFT		0
+
+#define BQ24190_REG_POC		0x01 /* Power-On Configuration */
+#define BQ24190_REG_POC_RESET_MASK		BIT(7)
+#define BQ24190_REG_POC_RESET_SHIFT		7
+#define BQ24190_REG_POC_WDT_RESET_MASK		BIT(6)
+#define BQ24190_REG_POC_WDT_RESET_SHIFT		6
+#define BQ24190_REG_POC_CHG_CONFIG_MASK		(BIT(5) | BIT(4))
+#define BQ24190_REG_POC_CHG_CONFIG_SHIFT	4
+#define BQ24190_REG_POC_SYS_MIN_MASK		(BIT(3) | BIT(2) | BIT(1))
+#define BQ24190_REG_POC_SYS_MIN_SHIFT		1
+#define BQ24190_REG_POC_BOOST_LIM_MASK		BIT(0)
+#define BQ24190_REG_POC_BOOST_LIM_SHIFT		0
+
+#define BQ24190_REG_CCC		0x02 /* Charge Current Control */
+#define BQ24190_REG_CCC_ICHG_MASK		(BIT(7) | BIT(6) | BIT(5) | \
+						 BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_CCC_ICHG_SHIFT		2
+#define BQ24190_REG_CCC_FORCE_20PCT_MASK	BIT(0)
+#define BQ24190_REG_CCC_FORCE_20PCT_SHIFT	0
+
+#define BQ24190_REG_PCTCC	0x03 /* Pre-charge/Termination Current Cntl */
+#define BQ24190_REG_PCTCC_IPRECHG_MASK		(BIT(7) | BIT(6) | BIT(5) | \
+						 BIT(4))
+#define BQ24190_REG_PCTCC_IPRECHG_SHIFT		4
+#define BQ24190_REG_PCTCC_ITERM_MASK		(BIT(3) | BIT(2) | BIT(1) | \
+						 BIT(0))
+#define BQ24190_REG_PCTCC_ITERM_SHIFT		0
+
+#define BQ24190_REG_CVC		0x04 /* Charge Voltage Control */
+#define BQ24190_REG_CVC_VREG_MASK		(BIT(7) | BIT(6) | BIT(5) | \
+						 BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_CVC_VREG_SHIFT		2
+#define BQ24190_REG_CVC_BATLOWV_MASK		BIT(1)
+#define BQ24190_REG_CVC_BATLOWV_SHIFT		1
+#define BQ24190_REG_CVC_VRECHG_MASK		BIT(0)
+#define BQ24190_REG_CVC_VRECHG_SHIFT		0
+
+#define BQ24190_REG_CTTC	0x05 /* Charge Term/Timer Control */
+#define BQ24190_REG_CTTC_EN_TERM_MASK		BIT(7)
+#define BQ24190_REG_CTTC_EN_TERM_SHIFT		7
+#define BQ24190_REG_CTTC_TERM_STAT_MASK		BIT(6)
+#define BQ24190_REG_CTTC_TERM_STAT_SHIFT	6
+#define BQ24190_REG_CTTC_WATCHDOG_MASK		(BIT(5) | BIT(4))
+#define BQ24190_REG_CTTC_WATCHDOG_SHIFT		4
+#define BQ24190_REG_CTTC_EN_TIMER_MASK		BIT(3)
+#define BQ24190_REG_CTTC_EN_TIMER_SHIFT		3
+#define BQ24190_REG_CTTC_CHG_TIMER_MASK		(BIT(2) | BIT(1))
+#define BQ24190_REG_CTTC_CHG_TIMER_SHIFT	1
+#define BQ24190_REG_CTTC_JEITA_ISET_MASK	BIT(0)
+#define BQ24190_REG_CTTC_JEITA_ISET_SHIFT	0
+
+#define BQ24190_REG_ICTRC	0x06 /* IR Comp/Thermal Regulation Control */
+#define BQ24190_REG_ICTRC_BAT_COMP_MASK		(BIT(7) | BIT(6) | BIT(5))
+#define BQ24190_REG_ICTRC_BAT_COMP_SHIFT	5
+#define BQ24190_REG_ICTRC_VCLAMP_MASK		(BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_ICTRC_VCLAMP_SHIFT		2
+#define BQ24190_REG_ICTRC_TREG_MASK		(BIT(1) | BIT(0))
+#define BQ24190_REG_ICTRC_TREG_SHIFT		0
+
+#define BQ24190_REG_MOC		0x07 /* Misc. Operation Control */
+#define BQ24190_REG_MOC_DPDM_EN_MASK		BIT(7)
+#define BQ24190_REG_MOC_DPDM_EN_SHIFT		7
+#define BQ24190_REG_MOC_TMR2X_EN_MASK		BIT(6)
+#define BQ24190_REG_MOC_TMR2X_EN_SHIFT		6
+#define BQ24190_REG_MOC_BATFET_DISABLE_MASK	BIT(5)
+#define BQ24190_REG_MOC_BATFET_DISABLE_SHIFT	5
+#define BQ24190_REG_MOC_JEITA_VSET_MASK		BIT(4)
+#define BQ24190_REG_MOC_JEITA_VSET_SHIFT	4
+#define BQ24190_REG_MOC_INT_MASK_MASK		(BIT(1) | BIT(0))
+#define BQ24190_REG_MOC_INT_MASK_SHIFT		0
+
+#define BQ24190_REG_SS		0x08 /* System Status */
+#define BQ24190_REG_SS_VBUS_STAT_MASK		(BIT(7) | BIT(6))
+#define BQ24190_REG_SS_VBUS_STAT_SHIFT		6
+#define BQ24190_REG_SS_CHRG_STAT_MASK		(BIT(5) | BIT(4))
+#define BQ24190_REG_SS_CHRG_STAT_SHIFT		4
+#define BQ24190_REG_SS_DPM_STAT_MASK		BIT(3)
+#define BQ24190_REG_SS_DPM_STAT_SHIFT		3
+#define BQ24190_REG_SS_PG_STAT_MASK		BIT(2)
+#define BQ24190_REG_SS_PG_STAT_SHIFT		2
+#define BQ24190_REG_SS_THERM_STAT_MASK		BIT(1)
+#define BQ24190_REG_SS_THERM_STAT_SHIFT		1
+#define BQ24190_REG_SS_VSYS_STAT_MASK		BIT(0)
+#define BQ24190_REG_SS_VSYS_STAT_SHIFT		0
+
+#define BQ24190_REG_F		0x09 /* Fault */
+#define BQ24190_REG_F_WATCHDOG_FAULT_MASK	BIT(7)
+#define BQ24190_REG_F_WATCHDOG_FAULT_SHIFT	7
+#define BQ24190_REG_F_BOOST_FAULT_MASK		BIT(6)
+#define BQ24190_REG_F_BOOST_FAULT_SHIFT		6
+#define BQ24190_REG_F_CHRG_FAULT_MASK		(BIT(5) | BIT(4))
+#define BQ24190_REG_F_CHRG_FAULT_SHIFT		4
+#define BQ24190_REG_F_BAT_FAULT_MASK		BIT(3)
+#define BQ24190_REG_F_BAT_FAULT_SHIFT		3
+#define BQ24190_REG_F_NTC_FAULT_MASK		(BIT(2) | BIT(1) | BIT(0))
+#define BQ24190_REG_F_NTC_FAULT_SHIFT		0
+
+#define BQ24190_REG_VPRS	0x0A /* Vendor/Part/Revision Status */
+#define BQ24190_REG_VPRS_PN_MASK		(BIT(5) | BIT(4) | BIT(3))
+#define BQ24190_REG_VPRS_PN_SHIFT		3
+#define BQ24190_REG_VPRS_PN_24190			0x4
+#define BQ24190_REG_VPRS_PN_24192			0x5 /* Also 24193 */
+#define BQ24190_REG_VPRS_PN_24192I			0x3
+#define BQ24190_REG_VPRS_TS_PROFILE_MASK	BIT(2)
+#define BQ24190_REG_VPRS_TS_PROFILE_SHIFT	2
+#define BQ24190_REG_VPRS_DEV_REG_MASK		(BIT(1) | BIT(0))
+#define BQ24190_REG_VPRS_DEV_REG_SHIFT		0
+
+/*
+ * The FAULT register is latched by the bq24190 (except for NTC_FAULT)
+ * so the first read after a fault returns the latched value and subsequent
+ * reads return the current value.  In order to return the fault status
+ * to the user, have the interrupt handler save the reg's value and retrieve
+ * it in the appropriate health/status routine.  Each routine has its own
+ * flag indicating whether it should use the value stored by the last run
+ * of the interrupt handler or do an actual reg read.  That way each routine
+ * can report back whatever fault may have occured.
+ */
+struct bq24190_dev_info {
+	struct i2c_client		*client;
+	struct device			*dev;
+	struct power_supply		charger;
+	struct power_supply		battery;
+	char				model_name[I2C_NAME_SIZE];
+	kernel_ulong_t			model;
+	unsigned int			gpio_int;
+	unsigned int			irq;
+	struct mutex			f_reg_lock;
+	bool				first_time;
+	bool				charger_health_valid;
+	bool				battery_health_valid;
+	bool				battery_status_valid;
+	u8				f_reg;
+	u8				ss_reg;
+	u8				watchdog;
+};
+
+/*
+ * The tables below provide a 2-way mapping for the value that goes in
+ * the register field and the real-world value that it represents.
+ * The index of the array is the value that goes in the register; the
+ * number at that index in the array is the real-world value that it
+ * represents.
+ */
+/* REG02[7:2] (ICHG) in uAh */
+static const int bq24190_ccc_ichg_values[] = {
+	 512000,  576000,  640000,  704000,  768000,  832000,  896000,  960000,
+	1024000, 1088000, 1152000, 1216000, 1280000, 1344000, 1408000, 1472000,
+	1536000, 1600000, 1664000, 1728000, 1792000, 1856000, 1920000, 1984000,
+	2048000, 2112000, 2176000, 2240000, 2304000, 2368000, 2432000, 2496000,
+	2560000, 2624000, 2688000, 2752000, 2816000, 2880000, 2944000, 3008000,
+	3072000, 3136000, 3200000, 3264000, 3328000, 3392000, 3456000, 3520000,
+	3584000, 3648000, 3712000, 3776000, 3840000, 3904000, 3968000, 4032000,
+	4096000, 4160000, 4224000, 4288000, 4352000, 4416000, 4480000, 4544000
+};
+
+/* REG04[7:2] (VREG) in uV */
+static const int bq24190_cvc_vreg_values[] = {
+	3504000, 3520000, 3536000, 3552000, 3568000, 3584000, 3600000, 3616000,
+	3632000, 3648000, 3664000, 3680000, 3696000, 3712000, 3728000, 3744000,
+	3760000, 3776000, 3792000, 3808000, 3824000, 3840000, 3856000, 3872000,
+	3888000, 3904000, 3920000, 3936000, 3952000, 3968000, 3984000, 4000000,
+	4016000, 4032000, 4048000, 4064000, 4080000, 4096000, 4112000, 4128000,
+	4144000, 4160000, 4176000, 4192000, 4208000, 4224000, 4240000, 4256000,
+	4272000, 4288000, 4304000, 4320000, 4336000, 4352000, 4368000, 4384000,
+	4400000
+};
+
+/* REG06[1:0] (TREG) in tenths of degrees Celcius */
+static const int bq24190_ictrc_treg_values[] = {
+	600, 800, 1000, 1200
+};
+
+/*
+ * Return the index in 'tbl' of greatest value that is less than or equal to
+ * 'val'.  The index range returned is 0 to 'tbl_size' - 1.  Assumes that
+ * the values in 'tbl' are sorted from smallest to largest and 'tbl_size'
+ * is less than 2^8.
+ */
+static u8 bq24190_find_idx(const int tbl[], int tbl_size, int v)
+{
+	int i;
+
+	for (i = 1; i < tbl_size; i++)
+		if (v < tbl[i])
+			break;
+
+	return i - 1;
+}
+
+/* Basic driver I/O routines */
+
+static int bq24190_read(struct bq24190_dev_info *bdi, u8 reg, u8 *data)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(bdi->client, reg);
+	if (ret < 0)
+		return ret;
+
+	*data = ret;
+	return 0;
+}
+
+static int bq24190_write(struct bq24190_dev_info *bdi, u8 reg, u8 data)
+{
+	return i2c_smbus_write_byte_data(bdi->client, reg, data);
+}
+
+static int bq24190_read_mask(struct bq24190_dev_info *bdi, u8 reg,
+		u8 mask, u8 shift, u8 *data)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read(bdi, reg, &v);
+	if (ret < 0)
+		return ret;
+
+	v &= mask;
+	v >>= shift;
+	*data = v;
+
+	return 0;
+}
+
+static int bq24190_write_mask(struct bq24190_dev_info *bdi, u8 reg,
+		u8 mask, u8 shift, u8 data)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read(bdi, reg, &v);
+	if (ret < 0)
+		return ret;
+
+	v &= ~mask;
+	v |= ((data << shift) & mask);
+
+	return bq24190_write(bdi, reg, v);
+}
+
+static int bq24190_get_field_val(struct bq24190_dev_info *bdi,
+		u8 reg, u8 mask, u8 shift,
+		const int tbl[], int tbl_size,
+		int *val)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, reg, mask, shift, &v);
+	if (ret < 0)
+		return ret;
+
+	v = (v >= tbl_size) ? (tbl_size - 1) : v;
+	*val = tbl[v];
+
+	return 0;
+}
+
+static int bq24190_set_field_val(struct bq24190_dev_info *bdi,
+		u8 reg, u8 mask, u8 shift,
+		const int tbl[], int tbl_size,
+		int val)
+{
+	u8 idx;
+
+	idx = bq24190_find_idx(tbl, tbl_size, val);
+
+	return bq24190_write_mask(bdi, reg, mask, shift, idx);
+}
+
+#ifdef CONFIG_SYSFS
+/*
+ * There are a numerous options that are configurable on the bq24190
+ * that go well beyond what the power_supply properties provide access to.
+ * Provide sysfs access to them so they can be examined and possibly modified
+ * on the fly.  They will be provided for the charger power_supply object only
+ * and will be prefixed by 'f_' to make them easier to recognize.
+ */
+
+#define BQ24190_SYSFS_FIELD(_name, r, f, m, store)			\
+{									\
+	.attr	= __ATTR(f_##_name, m, bq24190_sysfs_show, store),	\
+	.reg	= BQ24190_REG_##r,					\
+	.mask	= BQ24190_REG_##r##_##f##_MASK,				\
+	.shift	= BQ24190_REG_##r##_##f##_SHIFT,			\
+}
+
+#define BQ24190_SYSFS_FIELD_RW(_name, r, f)				\
+		BQ24190_SYSFS_FIELD(_name, r, f, S_IWUSR | S_IRUGO,	\
+				bq24190_sysfs_store)
+
+#define BQ24190_SYSFS_FIELD_RO(_name, r, f)				\
+		BQ24190_SYSFS_FIELD(_name, r, f, S_IRUGO, NULL)
+
+static ssize_t bq24190_sysfs_show(struct device *dev,
+		struct device_attribute *attr, char *buf);
+static ssize_t bq24190_sysfs_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count);
+
+struct bq24190_sysfs_field_info {
+	struct device_attribute	attr;
+	u8	reg;
+	u8	mask;
+	u8	shift;
+};
+
+static struct bq24190_sysfs_field_info bq24190_sysfs_field_tbl[] = {
+			/*	sysfs name	reg	field in reg */
+	BQ24190_SYSFS_FIELD_RW(en_hiz,		ISC,	EN_HIZ),
+	BQ24190_SYSFS_FIELD_RW(vindpm,		ISC,	VINDPM),
+	BQ24190_SYSFS_FIELD_RW(iinlim,		ISC,	IINLIM),
+	BQ24190_SYSFS_FIELD_RW(chg_config,	POC,	CHG_CONFIG),
+	BQ24190_SYSFS_FIELD_RW(sys_min,		POC,	SYS_MIN),
+	BQ24190_SYSFS_FIELD_RW(boost_lim,	POC,	BOOST_LIM),
+	BQ24190_SYSFS_FIELD_RW(ichg,		CCC,	ICHG),
+	BQ24190_SYSFS_FIELD_RW(force_20_pct,	CCC,	FORCE_20PCT),
+	BQ24190_SYSFS_FIELD_RW(iprechg,		PCTCC,	IPRECHG),
+	BQ24190_SYSFS_FIELD_RW(iterm,		PCTCC,	ITERM),
+	BQ24190_SYSFS_FIELD_RW(vreg,		CVC,	VREG),
+	BQ24190_SYSFS_FIELD_RW(batlowv,		CVC,	BATLOWV),
+	BQ24190_SYSFS_FIELD_RW(vrechg,		CVC,	VRECHG),
+	BQ24190_SYSFS_FIELD_RW(en_term,		CTTC,	EN_TERM),
+	BQ24190_SYSFS_FIELD_RW(term_stat,	CTTC,	TERM_STAT),
+	BQ24190_SYSFS_FIELD_RO(watchdog,	CTTC,	WATCHDOG),
+	BQ24190_SYSFS_FIELD_RW(en_timer,	CTTC,	EN_TIMER),
+	BQ24190_SYSFS_FIELD_RW(chg_timer,	CTTC,	CHG_TIMER),
+	BQ24190_SYSFS_FIELD_RW(jeta_iset,	CTTC,	JEITA_ISET),
+	BQ24190_SYSFS_FIELD_RW(bat_comp,	ICTRC,	BAT_COMP),
+	BQ24190_SYSFS_FIELD_RW(vclamp,		ICTRC,	VCLAMP),
+	BQ24190_SYSFS_FIELD_RW(treg,		ICTRC,	TREG),
+	BQ24190_SYSFS_FIELD_RW(dpdm_en,		MOC,	DPDM_EN),
+	BQ24190_SYSFS_FIELD_RW(tmr2x_en,	MOC,	TMR2X_EN),
+	BQ24190_SYSFS_FIELD_RW(batfet_disable,	MOC,	BATFET_DISABLE),
+	BQ24190_SYSFS_FIELD_RW(jeita_vset,	MOC,	JEITA_VSET),
+	BQ24190_SYSFS_FIELD_RO(int_mask,	MOC,	INT_MASK),
+	BQ24190_SYSFS_FIELD_RO(vbus_stat,	SS,	VBUS_STAT),
+	BQ24190_SYSFS_FIELD_RO(chrg_stat,	SS,	CHRG_STAT),
+	BQ24190_SYSFS_FIELD_RO(dpm_stat,	SS,	DPM_STAT),
+	BQ24190_SYSFS_FIELD_RO(pg_stat,		SS,	PG_STAT),
+	BQ24190_SYSFS_FIELD_RO(therm_stat,	SS,	THERM_STAT),
+	BQ24190_SYSFS_FIELD_RO(vsys_stat,	SS,	VSYS_STAT),
+	BQ24190_SYSFS_FIELD_RO(watchdog_fault,	F,	WATCHDOG_FAULT),
+	BQ24190_SYSFS_FIELD_RO(boost_fault,	F,	BOOST_FAULT),
+	BQ24190_SYSFS_FIELD_RO(chrg_fault,	F,	CHRG_FAULT),
+	BQ24190_SYSFS_FIELD_RO(bat_fault,	F,	BAT_FAULT),
+	BQ24190_SYSFS_FIELD_RO(ntc_fault,	F,	NTC_FAULT),
+	BQ24190_SYSFS_FIELD_RO(pn,		VPRS,	PN),
+	BQ24190_SYSFS_FIELD_RO(ts_profile,	VPRS,	TS_PROFILE),
+	BQ24190_SYSFS_FIELD_RO(dev_reg,		VPRS,	DEV_REG),
+};
+
+static struct attribute *
+	bq24190_sysfs_attrs[ARRAY_SIZE(bq24190_sysfs_field_tbl) + 1];
+
+static const struct attribute_group bq24190_sysfs_attr_group = {
+	.attrs = bq24190_sysfs_attrs,
+};
+
+static void bq24190_sysfs_init_attrs(void)
+{
+	int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
+
+	for (i = 0; i < limit; i++)
+		bq24190_sysfs_attrs[i] = &bq24190_sysfs_field_tbl[i].attr.attr;
+
+	bq24190_sysfs_attrs[limit] = NULL; /* Has additional entry for this */
+}
+
+static struct bq24190_sysfs_field_info *bq24190_sysfs_field_lookup(
+		const char *name)
+{
+	int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
+
+	for (i = 0; i < limit; i++)
+		if (!strcmp(name, bq24190_sysfs_field_tbl[i].attr.attr.name))
+			break;
+
+	if (i >= limit)
+		return NULL;
+
+	return &bq24190_sysfs_field_tbl[i];
+}
+
+static ssize_t bq24190_sysfs_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq24190_dev_info *bdi =
+			container_of(psy, struct bq24190_dev_info, charger);
+	struct bq24190_sysfs_field_info *info;
+	int ret;
+	u8 v;
+
+	info = bq24190_sysfs_field_lookup(attr->attr.name);
+	if (!info)
+		return -EINVAL;
+
+	ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v);
+	if (ret)
+		return ret;
+
+	return scnprintf(buf, PAGE_SIZE, "%hhx\n", v);
+}
+
+static ssize_t bq24190_sysfs_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct power_supply *psy = dev_get_drvdata(dev);
+	struct bq24190_dev_info *bdi =
+			container_of(psy, struct bq24190_dev_info, charger);
+	struct bq24190_sysfs_field_info *info;
+	int ret;
+	u8 v;
+
+	info = bq24190_sysfs_field_lookup(attr->attr.name);
+	if (!info)
+		return -EINVAL;
+
+	ret = kstrtou8(buf, 0, &v);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static int bq24190_sysfs_create_group(struct bq24190_dev_info *bdi)
+{
+	bq24190_sysfs_init_attrs();
+
+	return sysfs_create_group(&bdi->charger.dev->kobj,
+			&bq24190_sysfs_attr_group);
+}
+
+static void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi)
+{
+	sysfs_remove_group(&bdi->charger.dev->kobj, &bq24190_sysfs_attr_group);
+}
+#else
+static int bq24190_sysfs_create_group(struct bq24190_dev_info *bdi)
+{
+	return 0;
+}
+
+static inline void bq24190_sysfs_remove_group(struct bq24190_dev_info *bdi) {}
+#endif
+
+/*
+ * According to the "Host Mode and default Mode" section of the
+ * manual, a write to any register causes the bq24190 to switch
+ * from default mode to host mode.  It will switch back to default
+ * mode after a WDT timeout unless the WDT is turned off as well.
+ * So, by simply turning off the WDT, we accomplish both with the
+ * same write.
+ */
+static int bq24190_set_mode_host(struct bq24190_dev_info *bdi)
+{
+	int ret;
+	u8 v;
+
+	ret = bq24190_read(bdi, BQ24190_REG_CTTC, &v);
+	if (ret < 0)
+		return ret;
+
+	bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >>
+					BQ24190_REG_CTTC_WATCHDOG_SHIFT);
+	v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK;
+
+	return bq24190_write(bdi, BQ24190_REG_CTTC, v);
+}
+
+static int bq24190_register_reset(struct bq24190_dev_info *bdi)
+{
+	int ret, limit = 100;
+	u8 v;
+
+	/* Reset the registers */
+	ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+			BQ24190_REG_POC_RESET_MASK,
+			BQ24190_REG_POC_RESET_SHIFT,
+			0x1);
+	if (ret < 0)
+		return ret;
+
+	/* Reset bit will be cleared by hardware so poll until it is */
+	do {
+		ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+				BQ24190_REG_POC_RESET_MASK,
+				BQ24190_REG_POC_RESET_SHIFT,
+				&v);
+		if (ret < 0)
+			return ret;
+
+		if (!v)
+			break;
+
+		udelay(10);
+	} while (--limit);
+
+	if (!limit)
+		return -EIO;
+
+	return 0;
+}
+
+/* Charger power supply property routines */
+
+static int bq24190_charger_get_charge_type(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int type, ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+			BQ24190_REG_POC_CHG_CONFIG_MASK,
+			BQ24190_REG_POC_CHG_CONFIG_SHIFT,
+			&v);
+	if (ret < 0)
+		return ret;
+
+	/* If POC[CHG_CONFIG] (REG01[5:4]) == 0, charge is disabled */
+	if (!v) {
+		type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+	} else {
+		ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+				BQ24190_REG_CCC_FORCE_20PCT_MASK,
+				BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
+				&v);
+		if (ret < 0)
+			return ret;
+
+		type = (v) ? POWER_SUPPLY_CHARGE_TYPE_TRICKLE :
+			     POWER_SUPPLY_CHARGE_TYPE_FAST;
+	}
+
+	val->intval = type;
+
+	return 0;
+}
+
+static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	u8 chg_config, force_20pct, en_term;
+	int ret;
+
+	/*
+	 * According to the "Termination when REG02[0] = 1" section of
+	 * the bq24190 manual, the trickle charge could be less than the
+	 * termination current so it recommends turning off the termination
+	 * function.
+	 *
+	 * Note: AFAICT from the datasheet, the user will have to manually
+	 * turn off the charging when in 20% mode.  If its not turned off,
+	 * there could be battery damage.  So, use this mode at your own risk.
+	 */
+	switch (val->intval) {
+	case POWER_SUPPLY_CHARGE_TYPE_NONE:
+		chg_config = 0x0;
+		break;
+	case POWER_SUPPLY_CHARGE_TYPE_TRICKLE:
+		chg_config = 0x1;
+		force_20pct = 0x1;
+		en_term = 0x0;
+		break;
+	case POWER_SUPPLY_CHARGE_TYPE_FAST:
+		chg_config = 0x1;
+		force_20pct = 0x0;
+		en_term = 0x1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (chg_config) { /* Enabling the charger */
+		ret = bq24190_write_mask(bdi, BQ24190_REG_CCC,
+				BQ24190_REG_CCC_FORCE_20PCT_MASK,
+				BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
+				force_20pct);
+		if (ret < 0)
+			return ret;
+
+		ret = bq24190_write_mask(bdi, BQ24190_REG_CTTC,
+				BQ24190_REG_CTTC_EN_TERM_MASK,
+				BQ24190_REG_CTTC_EN_TERM_SHIFT,
+				en_term);
+		if (ret < 0)
+			return ret;
+	}
+
+	return bq24190_write_mask(bdi, BQ24190_REG_POC,
+			BQ24190_REG_POC_CHG_CONFIG_MASK,
+			BQ24190_REG_POC_CHG_CONFIG_SHIFT, chg_config);
+}
+
+static int bq24190_charger_get_health(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int health, ret;
+
+	mutex_lock(&bdi->f_reg_lock);
+
+	if (bdi->charger_health_valid) {
+		v = bdi->f_reg;
+		bdi->charger_health_valid = false;
+		mutex_unlock(&bdi->f_reg_lock);
+	} else {
+		mutex_unlock(&bdi->f_reg_lock);
+
+		ret = bq24190_read(bdi, BQ24190_REG_F, &v);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (v & BQ24190_REG_F_BOOST_FAULT_MASK) {
+		/*
+		 * This could be over-current or over-voltage but there's
+		 * no way to tell which.  Return 'OVERVOLTAGE' since there
+		 * isn't an 'OVERCURRENT' value defined that we can return
+		 * even if it was over-current.
+		 */
+		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	} else {
+		v &= BQ24190_REG_F_CHRG_FAULT_MASK;
+		v >>= BQ24190_REG_F_CHRG_FAULT_SHIFT;
+
+		switch (v) {
+		case 0x0: /* Normal */
+			health = POWER_SUPPLY_HEALTH_GOOD;
+			break;
+		case 0x1: /* Input Fault (VBUS OVP or VBAT<VBUS<3.8V) */
+			/*
+			 * This could be over-voltage or under-voltage
+			 * and there's no way to tell which.  Instead
+			 * of looking foolish and returning 'OVERVOLTAGE'
+			 * when its really under-voltage, just return
+			 * 'UNSPEC_FAILURE'.
+			 */
+			health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+			break;
+		case 0x2: /* Thermal Shutdown */
+			health = POWER_SUPPLY_HEALTH_OVERHEAT;
+			break;
+		case 0x3: /* Charge Safety Timer Expiration */
+			health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+			break;
+		default:
+			health = POWER_SUPPLY_HEALTH_UNKNOWN;
+		}
+	}
+
+	val->intval = health;
+
+	return 0;
+}
+
+static int bq24190_charger_get_online(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_SS,
+			BQ24190_REG_SS_PG_STAT_MASK,
+			BQ24190_REG_SS_PG_STAT_SHIFT, &v);
+	if (ret < 0)
+		return ret;
+
+	val->intval = v;
+	return 0;
+}
+
+static int bq24190_charger_get_current(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int curr, ret;
+
+	ret = bq24190_get_field_val(bdi, BQ24190_REG_CCC,
+			BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
+			bq24190_ccc_ichg_values,
+			ARRAY_SIZE(bq24190_ccc_ichg_values), &curr);
+	if (ret < 0)
+		return ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+			BQ24190_REG_CCC_FORCE_20PCT_MASK,
+			BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
+	if (ret < 0)
+		return ret;
+
+	/* If FORCE_20PCT is enabled, then current is 20% of ICHG value */
+	if (v)
+		curr /= 5;
+
+	val->intval = curr;
+	return 0;
+}
+
+static int bq24190_charger_get_current_max(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	int idx = ARRAY_SIZE(bq24190_ccc_ichg_values) - 1;
+
+	val->intval = bq24190_ccc_ichg_values[idx];
+	return 0;
+}
+
+static int bq24190_charger_set_current(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	u8 v;
+	int ret, curr = val->intval;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+			BQ24190_REG_CCC_FORCE_20PCT_MASK,
+			BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
+	if (ret < 0)
+		return ret;
+
+	/* If FORCE_20PCT is enabled, have to multiply value passed in by 5 */
+	if (v)
+		curr *= 5;
+
+	return bq24190_set_field_val(bdi, BQ24190_REG_CCC,
+			BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
+			bq24190_ccc_ichg_values,
+			ARRAY_SIZE(bq24190_ccc_ichg_values), curr);
+}
+
+static int bq24190_charger_get_voltage(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	int voltage, ret;
+
+	ret = bq24190_get_field_val(bdi, BQ24190_REG_CVC,
+			BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
+			bq24190_cvc_vreg_values,
+			ARRAY_SIZE(bq24190_cvc_vreg_values), &voltage);
+	if (ret < 0)
+		return ret;
+
+	val->intval = voltage;
+	return 0;
+}
+
+static int bq24190_charger_get_voltage_max(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	int idx = ARRAY_SIZE(bq24190_cvc_vreg_values) - 1;
+
+	val->intval = bq24190_cvc_vreg_values[idx];
+	return 0;
+}
+
+static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	return bq24190_set_field_val(bdi, BQ24190_REG_CVC,
+			BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
+			bq24190_cvc_vreg_values,
+			ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval);
+}
+
+static int bq24190_charger_get_property(struct power_supply *psy,
+		enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct bq24190_dev_info *bdi =
+			container_of(psy, struct bq24190_dev_info, charger);
+	int ret;
+
+	dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+	pm_runtime_get_sync(bdi->dev);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = bq24190_charger_get_charge_type(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = bq24190_charger_get_health(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = bq24190_charger_get_online(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq24190_charger_get_current(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+		ret = bq24190_charger_get_current_max(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq24190_charger_get_voltage(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		ret = bq24190_charger_get_voltage_max(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = bdi->model_name;
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = BQ24190_MANUFACTURER;
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+	}
+
+	pm_runtime_put_sync(bdi->dev);
+	return ret;
+}
+
+static int bq24190_charger_set_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		const union power_supply_propval *val)
+{
+	struct bq24190_dev_info *bdi =
+			container_of(psy, struct bq24190_dev_info, charger);
+	int ret;
+
+	dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+	pm_runtime_get_sync(bdi->dev);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = bq24190_charger_set_charge_type(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		ret = bq24190_charger_set_current(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = bq24190_charger_set_voltage(bdi, val);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	pm_runtime_put_sync(bdi->dev);
+	return ret;
+}
+
+static int bq24190_charger_property_is_writeable(struct power_supply *psy,
+		enum power_supply_property psp)
+{
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+		ret = 1;
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property bq24190_charger_properties[] = {
+	POWER_SUPPLY_PROP_TYPE,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_SCOPE,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static char *bq24190_charger_supplied_to[] = {
+	"main-battery",
+};
+
+static void bq24190_charger_init(struct power_supply *charger)
+{
+	charger->name = "bq24190-charger";
+	charger->type = POWER_SUPPLY_TYPE_USB;
+	charger->properties = bq24190_charger_properties;
+	charger->num_properties = ARRAY_SIZE(bq24190_charger_properties);
+	charger->supplied_to = bq24190_charger_supplied_to;
+	charger->num_supplies = ARRAY_SIZE(bq24190_charger_supplied_to);
+	charger->get_property = bq24190_charger_get_property;
+	charger->set_property = bq24190_charger_set_property;
+	charger->property_is_writeable = bq24190_charger_property_is_writeable;
+}
+
+/* Battery power supply property routines */
+
+static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 ss_reg, chrg_fault;
+	int status, ret;
+
+	mutex_lock(&bdi->f_reg_lock);
+
+	if (bdi->battery_status_valid) {
+		chrg_fault = bdi->f_reg;
+		bdi->battery_status_valid = false;
+		mutex_unlock(&bdi->f_reg_lock);
+	} else {
+		mutex_unlock(&bdi->f_reg_lock);
+
+		ret = bq24190_read(bdi, BQ24190_REG_F, &chrg_fault);
+		if (ret < 0)
+			return ret;
+	}
+
+	chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK;
+	chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT;
+
+	ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * The battery must be discharging when any of these are true:
+	 * - there is no good power source;
+	 * - there is a charge fault.
+	 * Could also be discharging when in "supplement mode" but
+	 * there is no way to tell when its in that mode.
+	 */
+	if (!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK) || chrg_fault) {
+		status = POWER_SUPPLY_STATUS_DISCHARGING;
+	} else {
+		ss_reg &= BQ24190_REG_SS_CHRG_STAT_MASK;
+		ss_reg >>= BQ24190_REG_SS_CHRG_STAT_SHIFT;
+
+		switch (ss_reg) {
+		case 0x0: /* Not Charging */
+			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		case 0x1: /* Pre-charge */
+		case 0x2: /* Fast Charging */
+			status = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		case 0x3: /* Charge Termination Done */
+			status = POWER_SUPPLY_STATUS_FULL;
+			break;
+		default:
+			ret = -EIO;
+		}
+	}
+
+	if (!ret)
+		val->intval = status;
+
+	return ret;
+}
+
+static int bq24190_battery_get_health(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 v;
+	int health, ret;
+
+	mutex_lock(&bdi->f_reg_lock);
+
+	if (bdi->battery_health_valid) {
+		v = bdi->f_reg;
+		bdi->battery_health_valid = false;
+		mutex_unlock(&bdi->f_reg_lock);
+	} else {
+		mutex_unlock(&bdi->f_reg_lock);
+
+		ret = bq24190_read(bdi, BQ24190_REG_F, &v);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
+		health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	} else {
+		v &= BQ24190_REG_F_NTC_FAULT_MASK;
+		v >>= BQ24190_REG_F_NTC_FAULT_SHIFT;
+
+		switch (v) {
+		case 0x0: /* Normal */
+			health = POWER_SUPPLY_HEALTH_GOOD;
+			break;
+		case 0x1: /* TS1 Cold */
+		case 0x3: /* TS2 Cold */
+		case 0x5: /* Both Cold */
+			health = POWER_SUPPLY_HEALTH_COLD;
+			break;
+		case 0x2: /* TS1 Hot */
+		case 0x4: /* TS2 Hot */
+		case 0x6: /* Both Hot */
+			health = POWER_SUPPLY_HEALTH_OVERHEAT;
+			break;
+		default:
+			health = POWER_SUPPLY_HEALTH_UNKNOWN;
+		}
+	}
+
+	val->intval = health;
+	return 0;
+}
+
+static int bq24190_battery_get_online(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	u8 batfet_disable;
+	int ret;
+
+	ret = bq24190_read_mask(bdi, BQ24190_REG_MOC,
+			BQ24190_REG_MOC_BATFET_DISABLE_MASK,
+			BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable);
+	if (ret < 0)
+		return ret;
+
+	val->intval = !batfet_disable;
+	return 0;
+}
+
+static int bq24190_battery_set_online(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	return bq24190_write_mask(bdi, BQ24190_REG_MOC,
+			BQ24190_REG_MOC_BATFET_DISABLE_MASK,
+			BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, !val->intval);
+}
+
+static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi,
+		union power_supply_propval *val)
+{
+	int temp, ret;
+
+	ret = bq24190_get_field_val(bdi, BQ24190_REG_ICTRC,
+			BQ24190_REG_ICTRC_TREG_MASK,
+			BQ24190_REG_ICTRC_TREG_SHIFT,
+			bq24190_ictrc_treg_values,
+			ARRAY_SIZE(bq24190_ictrc_treg_values), &temp);
+	if (ret < 0)
+		return ret;
+
+	val->intval = temp;
+	return 0;
+}
+
+static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi,
+		const union power_supply_propval *val)
+{
+	return bq24190_set_field_val(bdi, BQ24190_REG_ICTRC,
+			BQ24190_REG_ICTRC_TREG_MASK,
+			BQ24190_REG_ICTRC_TREG_SHIFT,
+			bq24190_ictrc_treg_values,
+			ARRAY_SIZE(bq24190_ictrc_treg_values), val->intval);
+}
+
+static int bq24190_battery_get_property(struct power_supply *psy,
+		enum power_supply_property psp, union power_supply_propval *val)
+{
+	struct bq24190_dev_info *bdi =
+			container_of(psy, struct bq24190_dev_info, battery);
+	int ret;
+
+	dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+	pm_runtime_get_sync(bdi->dev);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = bq24190_battery_get_status(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = bq24190_battery_get_health(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = bq24190_battery_get_online(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		/* Could be Li-on or Li-polymer but no way to tell which */
+		val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+		ret = 0;
+		break;
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = bq24190_battery_get_temp_alert_max(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_SCOPE:
+		val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+	}
+
+	pm_runtime_put_sync(bdi->dev);
+	return ret;
+}
+
+static int bq24190_battery_set_property(struct power_supply *psy,
+		enum power_supply_property psp,
+		const union power_supply_propval *val)
+{
+	struct bq24190_dev_info *bdi =
+			container_of(psy, struct bq24190_dev_info, battery);
+	int ret;
+
+	dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+	pm_runtime_put_sync(bdi->dev);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		ret = bq24190_battery_set_online(bdi, val);
+		break;
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = bq24190_battery_set_temp_alert_max(bdi, val);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	pm_runtime_put_sync(bdi->dev);
+	return ret;
+}
+
+static int bq24190_battery_property_is_writeable(struct power_supply *psy,
+		enum power_supply_property psp)
+{
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+	case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+		ret = 1;
+		break;
+	default:
+		ret = 0;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property bq24190_battery_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
+	POWER_SUPPLY_PROP_SCOPE,
+};
+
+static void bq24190_battery_init(struct power_supply *battery)
+{
+	battery->name = "bq24190-battery";
+	battery->type = POWER_SUPPLY_TYPE_BATTERY;
+	battery->properties = bq24190_battery_properties;
+	battery->num_properties = ARRAY_SIZE(bq24190_battery_properties);
+	battery->get_property = bq24190_battery_get_property;
+	battery->set_property = bq24190_battery_set_property;
+	battery->property_is_writeable = bq24190_battery_property_is_writeable;
+}
+
+static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
+{
+	struct bq24190_dev_info *bdi = data;
+	bool alert_userspace = false;
+	u8 ss_reg, f_reg;
+	int ret;
+
+	pm_runtime_get_sync(bdi->dev);
+
+	ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
+	if (ret < 0) {
+		dev_err(bdi->dev, "Can't read SS reg: %d\n", ret);
+		goto out;
+	}
+
+	if (ss_reg != bdi->ss_reg) {
+		/*
+		 * The device is in host mode so when PG_STAT goes from 1->0
+		 * (i.e., power removed) HIZ needs to be disabled.
+		 */
+		if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) &&
+				!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) {
+			ret = bq24190_write_mask(bdi, BQ24190_REG_ISC,
+					BQ24190_REG_ISC_EN_HIZ_MASK,
+					BQ24190_REG_ISC_EN_HIZ_SHIFT,
+					0);
+			if (ret < 0)
+				dev_err(bdi->dev, "Can't access ISC reg: %d\n",
+					ret);
+		}
+
+		bdi->ss_reg = ss_reg;
+		alert_userspace = true;
+	}
+
+	mutex_lock(&bdi->f_reg_lock);
+
+	ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg);
+	if (ret < 0) {
+		mutex_unlock(&bdi->f_reg_lock);
+		dev_err(bdi->dev, "Can't read F reg: %d\n", ret);
+		goto out;
+	}
+
+	if (f_reg != bdi->f_reg) {
+		bdi->f_reg = f_reg;
+		bdi->charger_health_valid = true;
+		bdi->battery_health_valid = true;
+		bdi->battery_status_valid = true;
+
+		alert_userspace = true;
+	}
+
+	mutex_unlock(&bdi->f_reg_lock);
+
+	/*
+	 * Sometimes bq24190 gives a steady trickle of interrupts even
+	 * though the watchdog timer is turned off and neither the STATUS
+	 * nor FAULT registers have changed.  Weed out these sprurious
+	 * interrupts so userspace isn't alerted for no reason.
+	 * In addition, the chip always generates an interrupt after
+	 * register reset so we should ignore that one (the very first
+	 * interrupt received).
+	 */
+	if (alert_userspace && !bdi->first_time) {
+		power_supply_changed(&bdi->charger);
+		power_supply_changed(&bdi->battery);
+		bdi->first_time = false;
+	}
+
+out:
+	pm_runtime_put_sync(bdi->dev);
+
+	dev_dbg(bdi->dev, "ss_reg: 0x%02x, f_reg: 0x%02x\n", ss_reg, f_reg);
+
+	return IRQ_HANDLED;
+}
+
+static int bq24190_hw_init(struct bq24190_dev_info *bdi)
+{
+	u8 v;
+	int ret;
+
+	pm_runtime_get_sync(bdi->dev);
+
+	/* First check that the device really is what its supposed to be */
+	ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS,
+			BQ24190_REG_VPRS_PN_MASK,
+			BQ24190_REG_VPRS_PN_SHIFT,
+			&v);
+	if (ret < 0)
+		goto out;
+
+	if (v != bdi->model) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	ret = bq24190_register_reset(bdi);
+	if (ret < 0)
+		goto out;
+
+	ret = bq24190_set_mode_host(bdi);
+out:
+	pm_runtime_put_sync(bdi->dev);
+	return ret;
+}
+
+#ifdef CONFIG_OF
+static int bq24190_setup_dt(struct bq24190_dev_info *bdi)
+{
+	bdi->irq = irq_of_parse_and_map(bdi->dev->of_node, 0);
+	if (bdi->irq <= 0)
+		return -1;
+
+	return 0;
+}
+#else
+static int bq24190_setup_dt(struct bq24190_dev_info *bdi)
+{
+	return -1;
+}
+#endif
+
+static int bq24190_setup_pdata(struct bq24190_dev_info *bdi,
+		struct bq24190_platform_data *pdata)
+{
+	int ret;
+
+	if (!gpio_is_valid(pdata->gpio_int))
+		return -1;
+
+	ret = gpio_request(pdata->gpio_int, dev_name(bdi->dev));
+	if (ret < 0)
+		return -1;
+
+	ret = gpio_direction_input(pdata->gpio_int);
+	if (ret < 0)
+		goto out;
+
+	bdi->irq = gpio_to_irq(pdata->gpio_int);
+	if (!bdi->irq)
+		goto out;
+
+	bdi->gpio_int = pdata->gpio_int;
+	return 0;
+
+out:
+	gpio_free(pdata->gpio_int);
+	return -1;
+}
+
+static int bq24190_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+	struct device *dev = &client->dev;
+	struct bq24190_platform_data *pdata = client->dev.platform_data;
+	struct bq24190_dev_info *bdi;
+	int ret;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
+		return -ENODEV;
+	}
+
+	bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL);
+	if (!bdi) {
+		dev_err(dev, "Can't alloc bdi struct\n");
+		return -ENOMEM;
+	}
+
+	bdi->client = client;
+	bdi->dev = dev;
+	bdi->model = id->driver_data;
+	strncpy(bdi->model_name, id->name, I2C_NAME_SIZE);
+	mutex_init(&bdi->f_reg_lock);
+	bdi->first_time = true;
+	bdi->charger_health_valid = false;
+	bdi->battery_health_valid = false;
+	bdi->battery_status_valid = false;
+
+	i2c_set_clientdata(client, bdi);
+
+	if (dev->of_node)
+		ret = bq24190_setup_dt(bdi);
+	else
+		ret = bq24190_setup_pdata(bdi, pdata);
+
+	if (ret) {
+		dev_err(dev, "Can't get irq info\n");
+		return -EINVAL;
+	}
+
+	ret = devm_request_threaded_irq(dev, bdi->irq, NULL,
+			bq24190_irq_handler_thread,
+			IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+			"bq24190-charger", bdi);
+	if (ret < 0) {
+		dev_err(dev, "Can't set up irq handler\n");
+		goto out1;
+	}
+
+	pm_runtime_enable(dev);
+	pm_runtime_resume(dev);
+
+	ret = bq24190_hw_init(bdi);
+	if (ret < 0) {
+		dev_err(dev, "Hardware init failed\n");
+		goto out2;
+	}
+
+	bq24190_charger_init(&bdi->charger);
+
+	ret = power_supply_register(dev, &bdi->charger);
+	if (ret) {
+		dev_err(dev, "Can't register charger\n");
+		goto out2;
+	}
+
+	bq24190_battery_init(&bdi->battery);
+
+	ret = power_supply_register(dev, &bdi->battery);
+	if (ret) {
+		dev_err(dev, "Can't register battery\n");
+		goto out3;
+	}
+
+	ret = bq24190_sysfs_create_group(bdi);
+	if (ret) {
+		dev_err(dev, "Can't create sysfs entries\n");
+		goto out4;
+	}
+
+	return 0;
+
+out4:
+	power_supply_unregister(&bdi->battery);
+out3:
+	power_supply_unregister(&bdi->charger);
+out2:
+	pm_runtime_disable(dev);
+out1:
+	if (bdi->gpio_int)
+		gpio_free(bdi->gpio_int);
+
+	return ret;
+}
+
+static int bq24190_remove(struct i2c_client *client)
+{
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+
+	pm_runtime_get_sync(bdi->dev);
+	bq24190_register_reset(bdi);
+	pm_runtime_put_sync(bdi->dev);
+
+	bq24190_sysfs_remove_group(bdi);
+	power_supply_unregister(&bdi->battery);
+	power_supply_unregister(&bdi->charger);
+	pm_runtime_disable(bdi->dev);
+
+	if (bdi->gpio_int)
+		gpio_free(bdi->gpio_int);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bq24190_pm_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+
+	pm_runtime_get_sync(bdi->dev);
+	bq24190_register_reset(bdi);
+	pm_runtime_put_sync(bdi->dev);
+
+	return 0;
+}
+
+static int bq24190_pm_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+
+	bdi->charger_health_valid = false;
+	bdi->battery_health_valid = false;
+	bdi->battery_status_valid = false;
+
+	pm_runtime_get_sync(bdi->dev);
+	bq24190_register_reset(bdi);
+	pm_runtime_put_sync(bdi->dev);
+
+	/* Things may have changed while suspended so alert upper layer */
+	power_supply_changed(&bdi->charger);
+	power_supply_changed(&bdi->battery);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(bq24190_pm_ops, bq24190_pm_suspend, bq24190_pm_resume);
+
+/*
+ * Only support the bq24190 right now.  The bq24192, bq24192i, and bq24193
+ * are similar but not identical so the driver needs to be extended to
+ * support them.
+ */
+static const struct i2c_device_id bq24190_i2c_ids[] = {
+	{ "bq24190", BQ24190_REG_VPRS_PN_24190 },
+	{ },
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id bq24190_of_match[] = {
+	{ .compatible = "ti,bq24190", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bq24190_of_match);
+#else
+static const struct of_device_id bq24190_of_match[] = {
+	{ },
+};
+#endif
+
+static struct i2c_driver bq24190_driver = {
+	.probe		= bq24190_probe,
+	.remove		= bq24190_remove,
+	.id_table	= bq24190_i2c_ids,
+	.driver = {
+		.name		= "bq24190-charger",
+		.owner		= THIS_MODULE,
+		.pm		= &bq24190_pm_ops,
+		.of_match_table	= of_match_ptr(bq24190_of_match),
+	},
+};
+module_i2c_driver(bq24190_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>");
+MODULE_ALIAS("i2c:bq24190-charger");
+MODULE_DESCRIPTION("TI BQ24190 Charger Driver");