Merge tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Pin control bulk changes for the v4.11 kernel cycle.

  Core changes:

   - Switch the generic pin config argument from 16 to 24 bits, only use
     8 bits for the configuration type. We might need to encode more
     information about a certain setting than we need to encode
     different generic settings.

   - Add a cross-talk API to the pin control GPIO back-end, utilizing
     pinctrl_gpio_set_config() from GPIO drivers that want to set up a
     certain pin configuration in the back-end.

     This also includes the .set_config() refactoring of the GPIO chips,
     so that they pass a generic configuration for things like
     debouncing and single ended (typically open drain). This change has
     also been merged in an immutable branch to the GPIO tree.

   - Take hogs with a delayed work, so that we finalize probing a pin
     controller before trying to get any hogs.

   - For pin controllers putting all group and function definitions into
     the device tree, we now have generic code to deal with this and it
     is used in two drivers so far.

   - Simplifications of the pin request conflict check.

   - Make dt_free_map() optional.

  Updates to drivers:

   - pinctrl-single now use the generic helpers to generate dynamic
     group and function tables from the device tree.

   - Texas Instruments IOdelay configuration driver add-on to
     pinctrl-single.

   - i.MX: use radix trees to store groups and functions, use the new
     generic group and function helpers to manage them.

   - Intel: add support for hardware debouncing and 1K pull-down. New
     subdriver for the Gemini Lake SoC.

   - Renesas SH-PFC: drive strength and bias support, CAN bus muxing,
     MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791.

   - Aspeed: use syscon cross-dependencies to set up related bits in the
     LPC host controller and display controller.

   - Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs.
     Add banks Y, Z, AA, AB and AC.

   - AMD: support additional GPIO.

   - STM32: set this controller to strict muxing mode. STM32H743 MCU
     support.

   - Allwinner sunxi: deep simplifications on how to support subvariants
     of SoCs without adding to much SoC-specific data for each
     subvariant, especially for sun5i variants. New driver for V3s SoCs.
     New driver for the H5 SoC. Support A31/A31s variants with the new
     variant framework.

   - Mvebu: simplifications to use a MMIO and regmap abstraction. New
     subdrivers for the 98DX3236, 98DX5241 SoCs.

   - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC
     driver to access regmaps. Add infrastructure for pin-bank retention
     control. Clean out the pin retention control from
     arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in
     the Samsung pin control driver(s).

   - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin.

   - Qualcomm: use raw spinlock variants: this makes the qualcomm driver
     realtime-safe"

* tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits)
  pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()
  pinctrl: intel: unlock on error in intel_config_set_pull()
  pinctrl: berlin: make bool drivers explicitly non-modular
  pinctrl: spear: make bool drivers explicitly non-modular
  pinctrl: mvebu: make bool drivers explicitly non-modular
  pinctrl: sunxi: make sun5i explicitly non-modular
  pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function
  pinctrl: samsung: mark PM functions as __maybe_unused
  pinctrl: sunxi: Remove redundant A31s pinctrl driver
  pinctrl: sunxi: Support A31/A31s with pinctrl variants
  pinctrl: Amend bindings for STM32 pinctrl
  pinctrl: Add STM32 pinctrl driver DT bindings
  pinctrl: stm32: Add STM32H743 MCU support
  include: dt-bindings: Add STM32H7 pinctrl DT defines
  gpio: aspeed: Remove dependence on GPIOF_* macros
  pinctrl: stm32: fix bad location of gpiochip_lock_as_irq
  drivers: pinctrl: add driver for Allwinner H5 SoC
  pinctrl: intel: Add Intel Gemini Lake pin controller support
  pinctrl: intel: Add support for 1k additional pull-down
  pinctrl: intel: Add support for hardware debouncer
  ...

1 files changed, 37 insertions, 28 deletions

diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.h b/drivers/pinctrl/mvebu/pinctrl-mvebu.h
index b75a5f4adf3b..c90704e74884 100644
--- a/drivers/pinctrl/mvebu/pinctrl-mvebu.h
+++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.h
@@ -14,6 +14,22 @@
 #define __PINCTRL_MVEBU_H__
 
 /**
+ * struct mvebu_mpp_ctrl_data - private data for the mpp ctrl operations
+ * @base: base address of pinctrl hardware
+ * @regmap.map: regmap structure
+ * @regmap.offset: regmap offset
+ */
+struct mvebu_mpp_ctrl_data {
+	union {
+		void __iomem *base;
+		struct {
+			struct regmap *map;
+			u32 offset;
+		} regmap;
+	};
+};
+
+/**
  * struct mvebu_mpp_ctrl - describe a mpp control
  * @name: name of the control group
  * @pid: first pin id handled by this control
@@ -37,10 +53,13 @@ struct mvebu_mpp_ctrl {
 	u8 pid;
 	u8 npins;
 	unsigned *pins;
-	int (*mpp_get)(unsigned pid, unsigned long *config);
-	int (*mpp_set)(unsigned pid, unsigned long config);
-	int (*mpp_gpio_req)(unsigned pid);
-	int (*mpp_gpio_dir)(unsigned pid, bool input);
+	int (*mpp_get)(struct mvebu_mpp_ctrl_data *data, unsigned pid,
+		       unsigned long *config);
+	int (*mpp_set)(struct mvebu_mpp_ctrl_data *data, unsigned pid,
+		       unsigned long config);
+	int (*mpp_gpio_req)(struct mvebu_mpp_ctrl_data *data, unsigned pid);
+	int (*mpp_gpio_dir)(struct mvebu_mpp_ctrl_data *data, unsigned pid,
+			    bool input);
 };
 
 /**
@@ -93,6 +112,7 @@ struct mvebu_mpp_mode {
  * struct mvebu_pinctrl_soc_info - SoC specific info passed to pinctrl-mvebu
  * @variant: variant mask of soc_info
  * @controls: list of available mvebu_mpp_ctrls
+ * @control_data: optional array, one entry for each control
  * @ncontrols: number of available mvebu_mpp_ctrls
  * @modes: list of available mvebu_mpp_modes
  * @nmodes: number of available mvebu_mpp_modes
@@ -105,7 +125,8 @@ struct mvebu_mpp_mode {
  */
 struct mvebu_pinctrl_soc_info {
 	u8 variant;
-	struct mvebu_mpp_ctrl *controls;
+	const struct mvebu_mpp_ctrl *controls;
+	struct mvebu_mpp_ctrl_data *control_data;
 	int ncontrols;
 	struct mvebu_mpp_mode *modes;
 	int nmodes;
@@ -177,30 +198,18 @@ struct mvebu_pinctrl_soc_info {
 #define MVEBU_MPP_BITS		4
 #define MVEBU_MPP_MASK		0xf
 
-static inline int default_mpp_ctrl_get(void __iomem *base, unsigned int pid,
-				       unsigned long *config)
-{
-	unsigned off = (pid / MVEBU_MPPS_PER_REG) * MVEBU_MPP_BITS;
-	unsigned shift = (pid % MVEBU_MPPS_PER_REG) * MVEBU_MPP_BITS;
-
-	*config = (readl(base + off) >> shift) & MVEBU_MPP_MASK;
-
-	return 0;
-}
-
-static inline int default_mpp_ctrl_set(void __iomem *base, unsigned int pid,
-				       unsigned long config)
-{
-	unsigned off = (pid / MVEBU_MPPS_PER_REG) * MVEBU_MPP_BITS;
-	unsigned shift = (pid % MVEBU_MPPS_PER_REG) * MVEBU_MPP_BITS;
-	unsigned long reg;
-
-	reg = readl(base + off) & ~(MVEBU_MPP_MASK << shift);
-	writel(reg | (config << shift), base + off);
-
-	return 0;
-}
+int mvebu_mmio_mpp_ctrl_get(struct mvebu_mpp_ctrl_data *data, unsigned pid,
+			       unsigned long *config);
+int mvebu_mmio_mpp_ctrl_set(struct mvebu_mpp_ctrl_data *data, unsigned pid,
+			       unsigned long config);
+int mvebu_regmap_mpp_ctrl_get(struct mvebu_mpp_ctrl_data *data, unsigned pid,
+			      unsigned long *config);
+int mvebu_regmap_mpp_ctrl_set(struct mvebu_mpp_ctrl_data *data, unsigned pid,
+			      unsigned long config);
 
 int mvebu_pinctrl_probe(struct platform_device *pdev);
+int mvebu_pinctrl_simple_mmio_probe(struct platform_device *pdev);
+int mvebu_pinctrl_simple_regmap_probe(struct platform_device *pdev,
+				      struct device *syscon_dev);
 
 #endif