Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core patches from Greg Kroah-Hartman:
 "Here is the big driver core merge for 3.9-rc1

  There are two major series here, both of which touch lots of drivers
  all over the kernel, and will cause you some merge conflicts:

   - add a new function called devm_ioremap_resource() to properly be
     able to check return values.

   - remove CONFIG_EXPERIMENTAL

  Other than those patches, there's not much here, some minor fixes and
  updates"

Fix up trivial conflicts

* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
  base: memory: fix soft/hard_offline_page permissions
  drivercore: Fix ordering between deferred_probe and exiting initcalls
  backlight: fix class_find_device() arguments
  TTY: mark tty_get_device call with the proper const values
  driver-core: constify data for class_find_device()
  firmware: Ignore abort check when no user-helper is used
  firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
  firmware: Make user-mode helper optional
  firmware: Refactoring for splitting user-mode helper code
  Driver core: treat unregistered bus_types as having no devices
  watchdog: Convert to devm_ioremap_resource()
  thermal: Convert to devm_ioremap_resource()
  spi: Convert to devm_ioremap_resource()
  power: Convert to devm_ioremap_resource()
  mtd: Convert to devm_ioremap_resource()
  mmc: Convert to devm_ioremap_resource()
  mfd: Convert to devm_ioremap_resource()
  media: Convert to devm_ioremap_resource()
  iommu: Convert to devm_ioremap_resource()
  drm: Convert to devm_ioremap_resource()
  ...

34 files changed, 92 insertions, 126 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 6a70184c3f23..2334190ff8d2 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -123,8 +123,7 @@ config IFB
 source "drivers/net/team/Kconfig"
 
 config MACVLAN
-	tristate "MAC-VLAN support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "MAC-VLAN support"
 	---help---
 	  This allows one to create virtual interfaces that map packets to
 	  or from specific MAC addresses to a particular interface.
@@ -138,7 +137,7 @@ config MACVLAN
 	  will be called macvlan.
 
 config MACVTAP
-	tristate "MAC-VLAN based tap driver (EXPERIMENTAL)"
+	tristate "MAC-VLAN based tap driver"
 	depends on MACVLAN
 	help
 	  This adds a specialized tap character device driver that is based
@@ -234,8 +233,8 @@ config VETH
 	  versa.
 
 config VIRTIO_NET
-	tristate "Virtio network driver (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && VIRTIO
+	tristate "Virtio network driver"
+	depends on VIRTIO
 	---help---
 	  This is the virtual network driver for virtio.  It can be used with
 	  lguest or QEMU based VMMs (like KVM or Xen).  Say Y or M.
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index 1b78ca7a9786..a5f91e1e8fe3 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -5,10 +5,7 @@
 config NET_VENDOR_8390
 	bool "National Semi-conductor 8390 devices"
 	default y
-	depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \
-		   ISA || MAC || M32R || MACH_TX49XX || \
-		   H8300 || ARM || MIPS || ZORRO || PCMCIA || \
-		   EXPERIMENTAL)
+	depends on NET_VENDOR_NATSEMI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
diff --git a/drivers/net/ethernet/atheros/Kconfig b/drivers/net/ethernet/atheros/Kconfig
index 1ed886d421f8..36d6abd1cfff 100644
--- a/drivers/net/ethernet/atheros/Kconfig
+++ b/drivers/net/ethernet/atheros/Kconfig
@@ -44,8 +44,8 @@ config ATL1
 	  will be called atl1.
 
 config ATL1E
-	tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Atheros L1E Gigabit Ethernet support"
+	depends on PCI
 	select CRC32
 	select NET_CORE
 	select MII
@@ -56,8 +56,8 @@ config ATL1E
 	  will be called atl1e.
 
 config ATL1C
-	tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Atheros L1C Gigabit Ethernet support"
+	depends on PCI
 	select CRC32
 	select NET_CORE
 	select MII
diff --git a/drivers/net/ethernet/dec/tulip/Kconfig b/drivers/net/ethernet/dec/tulip/Kconfig
index 1203be0436e2..0c37fb2cc867 100644
--- a/drivers/net/ethernet/dec/tulip/Kconfig
+++ b/drivers/net/ethernet/dec/tulip/Kconfig
@@ -57,8 +57,8 @@ config TULIP
 	  be called tulip.
 
 config TULIP_MWI
-	bool "New bus configuration (EXPERIMENTAL)"
-	depends on TULIP && EXPERIMENTAL
+	bool "New bus configuration"
+	depends on TULIP
 	---help---
 	  This configures your Tulip card specifically for the card and
 	  system cache line size type you are using.
diff --git a/drivers/net/ethernet/fujitsu/Kconfig b/drivers/net/ethernet/fujitsu/Kconfig
index c6a87625898a..6231bc02b964 100644
--- a/drivers/net/ethernet/fujitsu/Kconfig
+++ b/drivers/net/ethernet/fujitsu/Kconfig
@@ -5,7 +5,7 @@
 config NET_VENDOR_FUJITSU
 	bool "Fujitsu devices"
 	default y
-	depends on ISA || PCMCIA || (ISA && EXPERIMENTAL)
+	depends on ISA || PCMCIA
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig
index 955d929cd00f..9521e68aa3b3 100644
--- a/drivers/net/ethernet/i825xx/Kconfig
+++ b/drivers/net/ethernet/i825xx/Kconfig
@@ -5,9 +5,7 @@
 config NET_VENDOR_I825XX
 	bool "Intel (82586/82593/82596) devices"
 	default y
-	depends on NET_VENDOR_INTEL && (ISA || ISA_DMA_API || ARM || \
-		   ARCH_ACORN || SNI_RM || SUN3 || \
-		   GSC || BVME6000 || MVME16x || EXPERIMENTAL)
+	depends on NET_VENDOR_INTEL
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
diff --git a/drivers/net/ethernet/icplus/Kconfig b/drivers/net/ethernet/icplus/Kconfig
index 3aff81d7989f..5119ef18953b 100644
--- a/drivers/net/ethernet/icplus/Kconfig
+++ b/drivers/net/ethernet/icplus/Kconfig
@@ -4,7 +4,7 @@
 
 config IP1000
 	tristate "IP1000 Gigabit Ethernet support"
-	depends on PCI && EXPERIMENTAL
+	depends on PCI
 	select NET_CORE
 	select MII
 	---help---
diff --git a/drivers/net/ethernet/intel/Kconfig b/drivers/net/ethernet/intel/Kconfig
index 3d5f6d463757..05f7264c51f7 100644
--- a/drivers/net/ethernet/intel/Kconfig
+++ b/drivers/net/ethernet/intel/Kconfig
@@ -5,11 +5,6 @@
 config NET_VENDOR_INTEL
 	bool "Intel devices"
 	default y
-	depends on PCI || PCI_MSI || ISA || ISA_DMA_API || ARM || \
-		   ARCH_ACORN || SNI_RM || SUN3 || \
-		   GSC || BVME6000 || MVME16x || \
-		   (ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR) || \
-		   EXPERIMENTAL
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
diff --git a/drivers/net/ethernet/microchip/Kconfig b/drivers/net/ethernet/microchip/Kconfig
index 8163fd0f453f..afaf0c07f37f 100644
--- a/drivers/net/ethernet/microchip/Kconfig
+++ b/drivers/net/ethernet/microchip/Kconfig
@@ -5,7 +5,7 @@
 config NET_VENDOR_MICROCHIP
 	bool "Microchip devices"
 	default y
-	depends on SPI && EXPERIMENTAL
+	depends on SPI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -20,7 +20,7 @@ if NET_VENDOR_MICROCHIP
 
 config ENC28J60
 	tristate "ENC28J60 support"
-	depends on SPI && EXPERIMENTAL
+	depends on SPI
 	select CRC32
 	---help---
 	  Support for the Microchip EN28J60 ethernet chip.
diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig
index f157334579fd..a100860d45e6 100644
--- a/drivers/net/ethernet/natsemi/Kconfig
+++ b/drivers/net/ethernet/natsemi/Kconfig
@@ -5,9 +5,6 @@
 config NET_VENDOR_NATSEMI
 	bool "National Semi-conductor devices"
 	default y
-	depends on AMIGA_PCMCIA || ARM || EISA || EXPERIMENTAL || H8300 || \
-		   ISA || M32R || MAC || MACH_JAZZ || MACH_TX49XX || MIPS || \
-		   PCI || PCMCIA || SUPERH || XTENSA_PLATFORM_XT2000 || ZORRO
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig
index 8f29feb35548..cbbeca3f8c5c 100644
--- a/drivers/net/ethernet/packetengines/Kconfig
+++ b/drivers/net/ethernet/packetengines/Kconfig
@@ -32,8 +32,8 @@ config HAMACHI
 	  called hamachi.
 
 config YELLOWFIN
-	tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Packet Engines Yellowfin Gigabit-NIC support"
+	depends on PCI
 	select CRC32
 	---help---
 	  Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
diff --git a/drivers/net/ethernet/realtek/Kconfig b/drivers/net/ethernet/realtek/Kconfig
index 5821966f9f28..783fa8b5cde7 100644
--- a/drivers/net/ethernet/realtek/Kconfig
+++ b/drivers/net/ethernet/realtek/Kconfig
@@ -34,8 +34,8 @@ config ATP
 	  will be called atp.
 
 config 8139CP
-	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
+	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support"
+	depends on PCI
 	select CRC32
 	select NET_CORE
 	select MII
diff --git a/drivers/net/ethernet/seeq/Kconfig b/drivers/net/ethernet/seeq/Kconfig
index a71e1ec068ed..11f168e46ebe 100644
--- a/drivers/net/ethernet/seeq/Kconfig
+++ b/drivers/net/ethernet/seeq/Kconfig
@@ -6,7 +6,6 @@ config NET_VENDOR_SEEQ
 	bool "SEEQ devices"
 	default y
 	depends on HAS_IOMEM
-	depends on (ARM && ARCH_ACORN) || SGI_HAS_SEEQ || EXPERIMENTAL
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
diff --git a/drivers/net/ethernet/silan/Kconfig b/drivers/net/ethernet/silan/Kconfig
index ae1ce170864d..3409b3f97a1b 100644
--- a/drivers/net/ethernet/silan/Kconfig
+++ b/drivers/net/ethernet/silan/Kconfig
@@ -5,7 +5,7 @@
 config NET_VENDOR_SILAN
 	bool "Silan devices"
 	default y
-	depends on PCI && EXPERIMENTAL
+	depends on PCI
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -19,8 +19,8 @@ config NET_VENDOR_SILAN
 if NET_VENDOR_SILAN
 
 config SC92031
-	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
-	depends on PCI && EXPERIMENTAL
+	tristate "Silan SC92031 PCI Fast Ethernet Adapter driver"
+	depends on PCI
 	select CRC32
 	---help---
 	  This is a driver for the Fast Ethernet PCI network cards based on
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 1164930a40a5..c0ea838c78d1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -26,8 +26,8 @@ config STMMAC_PLATFORM
 	  If unsure, say N.
 
 config STMMAC_PCI
-	bool "STMMAC PCI bus support (EXPERIMENTAL)"
-	depends on STMMAC_ETH && PCI && EXPERIMENTAL
+	bool "STMMAC PCI bus support"
+	depends on STMMAC_ETH && PCI
 	---help---
 	  This is to select the Synopsys DWMAC available on PCI devices,
 	  if you have a controller with this interface, say Y or M here.
diff --git a/drivers/net/ethernet/sun/Kconfig b/drivers/net/ethernet/sun/Kconfig
index 57bfd8599679..ae3a3557293f 100644
--- a/drivers/net/ethernet/sun/Kconfig
+++ b/drivers/net/ethernet/sun/Kconfig
@@ -32,8 +32,8 @@ config HAPPYMEAL
 	  will be called sunhme.
 
 config SUNBMAC
-	tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
-	depends on SBUS && EXPERIMENTAL
+	tristate "Sun BigMAC 10/100baseT support"
+	depends on SBUS
 	select CRC32
 	---help---
 	  This driver supports the "be" interface available as an Sbus option.
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 4426151d4ac9..de71b1ec4625 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -88,8 +88,8 @@ config TLAN
 	  Please email feedback to <torben.mathiasen@compaq.com>.
 
 config CPMAC
-	tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && AR7
+	tristate "TI AR7 CPMAC Ethernet support"
+	depends on AR7
 	select PHYLIB
 	---help---
 	  TI AR7 CPMAC Ethernet support
diff --git a/drivers/net/hippi/Kconfig b/drivers/net/hippi/Kconfig
index 95eb34fdbba7..f71515dc5beb 100644
--- a/drivers/net/hippi/Kconfig
+++ b/drivers/net/hippi/Kconfig
@@ -3,8 +3,8 @@
 #
 
 config HIPPI
-	bool "HIPPI driver support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && INET && PCI
+	bool "HIPPI driver support"
+	depends on INET && PCI
 	---help---
 	  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
 	  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
@@ -18,7 +18,7 @@ config HIPPI
 if HIPPI
 
 config ROADRUNNER
-	tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
+	tristate "Essential RoadRunner HIPPI PCI adapter support"
 	depends on PCI
 	---help---
 	  Say Y here if this is your PCI HIPPI network card.
@@ -27,7 +27,7 @@ config ROADRUNNER
 	  will be called rrunner.  If unsure, say N.
 
 config ROADRUNNER_LARGE_RINGS
-	bool "Use large TX/RX rings (EXPERIMENTAL)"
+	bool "Use large TX/RX rings"
 	depends on ROADRUNNER
 	---help---
 	  If you say Y here, the RoadRunner driver will preallocate up to 2 MB
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 595205406d73..59e9d9e1fd0f 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -140,7 +140,7 @@ config LITELINK_DONGLE
 
 config MA600_DONGLE
 	tristate "Mobile Action MA600 dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Mobile Action MA600
 	  dongle.  To compile it as a module, choose M here. The MA600 dongle
@@ -153,7 +153,7 @@ config MA600_DONGLE
 
 config GIRBIL_DONGLE
 	tristate "Greenwich GIrBIL dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Greenwich GIrBIL
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -164,7 +164,7 @@ config GIRBIL_DONGLE
 
 config MCP2120_DONGLE
 	tristate "Microchip MCP2120"
-	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Microchip MCP2120
 	  dongle.  If you want to compile it as a module, choose M here.
@@ -178,7 +178,7 @@ config MCP2120_DONGLE
 
 config OLD_BELKIN_DONGLE
 	tristate "Old Belkin dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the Adaptec Airport 1000
 	  and 2000 dongles.  If you want to compile it as a module, choose
@@ -187,7 +187,7 @@ config OLD_BELKIN_DONGLE
 
 config ACT200L_DONGLE
 	tristate "ACTiSYS IR-200L dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && DONGLE && IRDA
 	help
 	  Say Y here if you want to build support for the ACTiSYS IR-200L
 	  dongle. If you want to compile it as a module, choose M here.
@@ -198,7 +198,7 @@ config ACT200L_DONGLE
 
 config KINGSUN_DONGLE
 	tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
-	depends on IRDA && USB && EXPERIMENTAL
+	depends on IRDA && USB
 	help
 	  Say Y or M here if you want to build support for the KingSun/DonShine
 	  DS-620 IrDA-USB bridge device driver.
@@ -212,14 +212,14 @@ config KINGSUN_DONGLE
 
 config EP7211_DONGLE
 	tristate "Cirrus Logic clps711x I/R support"
-	depends on IRTTY_SIR && ARCH_CLPS711X && IRDA && EXPERIMENTAL
+	depends on IRTTY_SIR && ARCH_CLPS711X && IRDA
 	help
 	  Say Y here if you want to build support for the Cirrus logic
 	  EP7211 chipset's infrared module.
 
 config KSDAZZLE_DONGLE
-	tristate "KingSun Dazzle IrDA-USB dongle (EXPERIMENTAL)"
-	depends on IRDA && USB && EXPERIMENTAL
+	tristate "KingSun Dazzle IrDA-USB dongle"
+	depends on IRDA && USB
 	help
 	  Say Y or M here if you want to build support for the KingSun Dazzle
 	  IrDA-USB bridge device driver.
@@ -232,8 +232,8 @@ config KSDAZZLE_DONGLE
 	  ksdazzle-sir.
 
 config KS959_DONGLE
-	tristate "KingSun KS-959 IrDA-USB dongle (EXPERIMENTAL)"
-	depends on IRDA && USB && EXPERIMENTAL
+	tristate "KingSun KS-959 IrDA-USB dongle"
+	depends on IRDA && USB
 	help
 	  Say Y or M here if you want to build support for the KingSun KS-959
 	  IrDA-USB bridge device driver.
@@ -264,8 +264,8 @@ config USB_IRDA
 	  you will need both USB and IrDA support in your kernel...
 
 config SIGMATEL_FIR
-	tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)"
-	depends on IRDA && USB && EXPERIMENTAL
+	tristate "SigmaTel STIr4200 bridge"
+	depends on IRDA && USB
 	select CRC32
 	---help---
 	  Say Y here if you want to build support for the SigmaTel STIr4200
@@ -331,8 +331,8 @@ config SMC_IRCC_FIR
 	  smsc-ircc2.o.
 
 config ALI_FIR
-	tristate "ALi M5123 FIR (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && IRDA && ISA_DMA_API
+	tristate "ALi M5123 FIR"
+	depends on IRDA && ISA_DMA_API
 	help
 	  Say Y here if you want to build support for the ALi M5123 FIR
 	  Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,
@@ -343,8 +343,8 @@ config ALI_FIR
 	  ali-ircc.
 
 config VLSI_FIR
-	tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && IRDA && PCI
+	tristate "VLSI 82C147 SIR/MIR/FIR"
+	depends on IRDA && PCI
 	help
 	  Say Y here if you want to build support for the VLSI 82C147
 	  PCI-IrDA Controller. This controller is used by the HP OmniBook 800
@@ -387,7 +387,7 @@ config PXA_FICP
 
 config MCS_FIR
 	tristate "MosChip MCS7780 IrDA-USB dongle"
-	depends on IRDA && USB && EXPERIMENTAL
+	depends on IRDA && USB
 	select CRC32
 	help
 	  Say Y or M here if you want to build support for the MosChip
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 044b5326459f..dc920974204e 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -95,7 +95,7 @@ static struct class mdio_bus_class = {
 
 #if IS_ENABLED(CONFIG_OF_MDIO)
 /* Helper function for of_mdio_find_bus */
-static int of_mdio_bus_match(struct device *dev, void *mdio_bus_np)
+static int of_mdio_bus_match(struct device *dev, const void *mdio_bus_np)
 {
 	return dev->of_node == mdio_bus_np;
 }
diff --git a/drivers/net/ppp/Kconfig b/drivers/net/ppp/Kconfig
index 872df3ef07a6..278dea0c4c98 100644
--- a/drivers/net/ppp/Kconfig
+++ b/drivers/net/ppp/Kconfig
@@ -82,8 +82,8 @@ config PPP_FILTER
 	  If unsure, say N.
 
 config PPP_MPPE
-	tristate "PPP MPPE compression (encryption) (EXPERIMENTAL)"
-	depends on PPP && EXPERIMENTAL
+	tristate "PPP MPPE compression (encryption)"
+	depends on PPP
 	select CRYPTO
 	select CRYPTO_SHA1
 	select CRYPTO_ARC4
@@ -96,8 +96,8 @@ config PPP_MPPE
 	  configuring PPTP clients and servers to utilize this method.
 
 config PPP_MULTILINK
-	bool "PPP multilink support (EXPERIMENTAL)"
-	depends on PPP && EXPERIMENTAL
+	bool "PPP multilink support"
+	depends on PPP
 	---help---
 	  PPP multilink is a protocol (defined in RFC 1990) which allows you
 	  to combine several (logical or physical) lines into one logical PPP
@@ -118,8 +118,8 @@ config PPPOATM
 	  changes its encapsulation unilaterally.
 
 config PPPOE
-	tristate "PPP over Ethernet (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PPP
+	tristate "PPP over Ethernet"
+	depends on PPP
 	---help---
 	  Support for PPP over Ethernet.
 
@@ -130,8 +130,8 @@ config PPPOE
 	  the heading "Kernel mode PPPoE").
 
 config PPTP
-	tristate "PPP over IPv4 (PPTP) (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && PPP && NET_IPGRE_DEMUX
+	tristate "PPP over IPv4 (PPTP)"
+	depends on PPP && NET_IPGRE_DEMUX
 	---help---
 	  Support for PPP over IPv4.(Point-to-Point Tunneling Protocol)
 
@@ -141,8 +141,8 @@ config PPTP
 	  utilize this module.
 
 config PPPOL2TP
-	tristate "PPP over L2TP (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && L2TP && PPP
+	tristate "PPP over L2TP"
+	depends on L2TP && PPP
 	---help---
 	  Support for PPP-over-L2TP socket family. L2TP is a protocol
 	  used by ISPs and enterprises to tunnel PPP traffic over UDP
diff --git a/drivers/net/team/Kconfig b/drivers/net/team/Kconfig
index 6b08bd419fba..c3011af68e91 100644
--- a/drivers/net/team/Kconfig
+++ b/drivers/net/team/Kconfig
@@ -1,6 +1,5 @@
 menuconfig NET_TEAM
-	tristate "Ethernet team driver support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "Ethernet team driver support"
 	---help---
 	  This allows one to create virtual interfaces that teams together
 	  multiple ethernet devices.
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index ef976215b649..3a44a5d7bf9e 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -8,8 +8,7 @@ menu "USB Network Adapters"
 	depends on USB && NET
 
 config USB_CATC
-	tristate "USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "USB CATC NetMate-based Ethernet device support"
 	select CRC32
 	---help---
 	  Say Y if you want to use one of the following 10Mbps USB Ethernet
@@ -83,8 +82,7 @@ config USB_PEGASUS
 	  module will be called pegasus.
 
 config USB_RTL8150
-	tristate "USB RTL8150 based ethernet device support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "USB RTL8150 based ethernet device support"
 	select NET_CORE
 	select MII
 	help
@@ -188,7 +186,7 @@ config USB_NET_CDCETHER
 
 config USB_NET_CDC_EEM
 	tristate "CDC EEM support"
-	depends on USB_USBNET && EXPERIMENTAL
+	depends on USB_USBNET
 	help
 	  This option supports devices conforming to the Communication Device
 	  Class (CDC) Ethernet Emulation Model, a specification that's easy to
@@ -287,7 +285,7 @@ config USB_NET_PLUSB
 	tristate "Prolific PL-2301/2302/25A1 based cables"
 	# if the handshake/init/reset problems, from original 'plusb',
 	# are ever resolved ... then remove "experimental"
-	depends on USB_USBNET && EXPERIMENTAL
+	depends on USB_USBNET
 	help
 	  Choose this option if you're using a host-to-host cable
 	  with one of these chips.
@@ -301,8 +299,8 @@ config USB_NET_MCS7830
 	  adapters marketed under the DeLOCK brand.
 
 config USB_NET_RNDIS_HOST
-	tristate "Host for RNDIS and ActiveSync devices (EXPERIMENTAL)"
-	depends on USB_USBNET && EXPERIMENTAL
+	tristate "Host for RNDIS and ActiveSync devices"
+	depends on USB_USBNET
 	select USB_NET_CDCETHER
 	help
 	  This option enables hosting "Remote NDIS" USB networking links,
@@ -380,7 +378,7 @@ config USB_EPSON2888
 
 config USB_KC2190
 	boolean "KT Technology KC2190 based cables (InstaNet)"
-	depends on USB_NET_CDC_SUBSET && EXPERIMENTAL
+	depends on USB_NET_CDC_SUBSET
 	help
 	  Choose this option if you're using a host-to-host cable
 	  with one of these chips.
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 0c077b0f7a2b..13daec88d918 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -358,7 +358,7 @@ config SDLA
 
 # X.25 network drivers
 config LAPBETHER
-	tristate "LAPB over Ethernet driver (EXPERIMENTAL)"
+	tristate "LAPB over Ethernet driver"
 	depends on LAPB && X25
 	---help---
 	  Driver for a pseudo device (typically called /dev/lapb0) which allows
@@ -374,7 +374,7 @@ config LAPBETHER
 	  If unsure, say N.
 
 config X25_ASY
-	tristate "X.25 async driver (EXPERIMENTAL)"
+	tristate "X.25 async driver"
 	depends on LAPB && X25
 	---help---
 	  Send and receive X.25 frames over regular asynchronous serial
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 28aa05f60c26..f8f0156dff4e 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -138,7 +138,7 @@ config AIRO_CS
 
 config PCMCIA_WL3501
 	tristate "Planet WL3501 PCMCIA cards"
-	depends on EXPERIMENTAL && PCMCIA
+	depends on PCMCIA
 	select WIRELESS_EXT
 	select WEXT_SPY
 	help
@@ -148,7 +148,7 @@ config PCMCIA_WL3501
 
 config PRISM54
 	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
-	depends on PCI && EXPERIMENTAL
+	depends on PCI
 	select WIRELESS_EXT
 	select WEXT_SPY
 	select WEXT_PRIV
@@ -187,7 +187,7 @@ config USB_ZD1201
 
 config USB_NET_RNDIS_WLAN
 	tristate "Wireless RNDIS USB support"
-	depends on USB && EXPERIMENTAL
+	depends on USB
 	depends on CFG80211
 	select USB_USBNET
 	select USB_NET_CDCETHER
@@ -217,7 +217,7 @@ source "drivers/net/wireless/rtl818x/Kconfig"
 
 config ADM8211
 	tristate "ADMtek ADM8211 support"
-	depends on MAC80211 && PCI && EXPERIMENTAL
+	depends on MAC80211 && PCI
 	select CRC32
 	select EEPROM_93CX6
 	---help---
@@ -257,7 +257,7 @@ config MAC80211_HWSIM
 
 config MWL8K
 	tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
-	depends on MAC80211 && PCI && EXPERIMENTAL
+	depends on MAC80211 && PCI
 	---help---
 	  This driver supports Marvell TOPDOG 802.11 wireless cards.
 
diff --git a/drivers/net/wireless/ath/ath6kl/Kconfig b/drivers/net/wireless/ath/ath6kl/Kconfig
index 26c4b7220859..630c83db056e 100644
--- a/drivers/net/wireless/ath/ath6kl/Kconfig
+++ b/drivers/net/wireless/ath/ath6kl/Kconfig
@@ -18,7 +18,6 @@ config ATH6KL_USB
 	depends on ATH6KL
 	depends on USB
 	depends on CFG80211
-	depends on EXPERIMENTAL
 	---help---
 	  This module adds support for wireless adapters based on
 	  Atheros AR6004 chipset running over USB. This is still under
diff --git a/drivers/net/wireless/ath/carl9170/Kconfig b/drivers/net/wireless/ath/carl9170/Kconfig
index 13a204598766..1a796e5f69ec 100644
--- a/drivers/net/wireless/ath/carl9170/Kconfig
+++ b/drivers/net/wireless/ath/carl9170/Kconfig
@@ -1,6 +1,6 @@
 config CARL9170
 	tristate "Linux Community AR9170 802.11n USB support"
-	depends on USB && MAC80211 && EXPERIMENTAL
+	depends on USB && MAC80211
 	select ATH_COMMON
 	select FW_LOADER
 	select CRC32
diff --git a/drivers/net/wireless/ath/wil6210/dbg_hexdump.h b/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
index 6a315ba5aa7d..e5712f026c47 100644
--- a/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
+++ b/drivers/net/wireless/ath/wil6210/dbg_hexdump.h
@@ -1,25 +1,15 @@
 #ifndef WIL_DBG_HEXDUMP_H_
 #define WIL_DBG_HEXDUMP_H_
 
-#if defined(CONFIG_DYNAMIC_DEBUG)
-#define wil_dynamic_hex_dump(prefix_str, prefix_type, rowsize,	\
-			     groupsize, buf, len, ascii)	\
-do {								\
-	DEFINE_DYNAMIC_DEBUG_METADATA(descriptor,		\
-		__builtin_constant_p(prefix_str) ? prefix_str : "hexdump");\
-	if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT))	\
-		print_hex_dump(KERN_DEBUG, prefix_str,		\
-			       prefix_type, rowsize, groupsize,	\
-			       buf, len, ascii);		\
-} while (0)
+#include <linux/printk.h>
+#include <linux/dynamic_debug.h>
 
+#if defined(CONFIG_DYNAMIC_DEBUG)
 #define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize,	\
 				 groupsize, buf, len, ascii)		\
-	wil_dynamic_hex_dump(prefix_str, prefix_type, rowsize,		\
+	dynamic_hex_dump(prefix_str, prefix_type, rowsize,		\
 			     groupsize, buf, len, ascii)
 
-#define print_hex_dump_bytes(prefix_str, prefix_type, buf, len)	\
-	wil_dynamic_hex_dump(prefix_str, prefix_type, 16, 1, buf, len, true)
 #else /* defined(CONFIG_DYNAMIC_DEBUG) */
 #define wil_print_hex_dump_debug(prefix_str, prefix_type, rowsize,	\
 				 groupsize, buf, len, ascii)		\
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index 7a28d21ac389..287c6b670a36 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -78,8 +78,8 @@ config B43_PCMCIA
 	  If unsure, say N.
 
 config B43_SDIO
-	bool "Broadcom 43xx SDIO device support (EXPERIMENTAL)"
-	depends on B43 && SSB_SDIOHOST_POSSIBLE && EXPERIMENTAL
+	bool "Broadcom 43xx SDIO device support"
+	depends on B43 && SSB_SDIOHOST_POSSIBLE
 	select SSB_SDIOHOST
 	---help---
 	  Broadcom 43xx device support for Soft-MAC SDIO devices.
@@ -109,8 +109,8 @@ config B43_PIO
 	default y
 
 config B43_PHY_N
-	bool "Support for 802.11n (N-PHY) devices (EXPERIMENTAL)"
-	depends on B43 && EXPERIMENTAL
+	bool "Support for 802.11n (N-PHY) devices"
+	depends on B43
 	---help---
 	  Support for the N-PHY.
 
@@ -130,8 +130,8 @@ config B43_PHY_LP
 	  (802.11a support is optional, and currently disabled).
 
 config B43_PHY_HT
-	bool "Support for HT-PHY (high throughput) devices (EXPERIMENTAL)"
-	depends on B43 && EXPERIMENTAL
+	bool "Support for HT-PHY (high throughput) devices"
+	depends on B43
 	---help---
 	  Support for the HT-PHY.
 
diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig
index 2715b101aded..91c0cb3c368e 100644
--- a/drivers/net/wireless/ipw2x00/Kconfig
+++ b/drivers/net/wireless/ipw2x00/Kconfig
@@ -137,7 +137,7 @@ config IPW2200_PROMISCUOUS
 
 config IPW2200_QOS
         bool "Enable QoS support"
-        depends on IPW2200 && EXPERIMENTAL
+        depends on IPW2200
 
 config IPW2200_DEBUG
 	bool "Enable full debugging output in IPW2200 module."
diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig
index 0ec55b50798e..15ea36b51a66 100644
--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -1,6 +1,6 @@
 config P54_COMMON
 	tristate "Softmac Prism54 support"
-	depends on MAC80211 && EXPERIMENTAL
+	depends on MAC80211
 	select FW_LOADER
 	select CRC_CCITT
 	---help---
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index c7548da6573d..44d6ead43341 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -82,7 +82,6 @@ config RT2800PCI_RT33XX
 
 config RT2800PCI_RT35XX
 	bool "rt2800pci - Include support for rt35xx devices (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
 	default y
 	---help---
 	  This adds support for rt35xx wireless chipset family to the
@@ -92,7 +91,6 @@ config RT2800PCI_RT35XX
 
 config RT2800PCI_RT53XX
        bool "rt2800pci - Include support for rt53xx devices (EXPERIMENTAL)"
-       depends on EXPERIMENTAL
        default y
        ---help---
          This adds support for rt53xx wireless chipset family to the
@@ -101,7 +99,6 @@ config RT2800PCI_RT53XX
 
 config RT2800PCI_RT3290
        bool "rt2800pci - Include support for rt3290 devices (EXPERIMENTAL)"
-       depends on EXPERIMENTAL
        default y
        ---help---
          This adds support for rt3290 wireless chipset family to the
@@ -159,7 +156,6 @@ config RT2800USB_RT33XX
 
 config RT2800USB_RT35XX
 	bool "rt2800usb - Include support for rt35xx devices (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
 	default y
 	---help---
 	  This adds support for rt35xx wireless chipset family to the
@@ -168,7 +164,6 @@ config RT2800USB_RT35XX
 
 config RT2800USB_RT53XX
        bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)"
-       depends on EXPERIMENTAL
        ---help---
          This adds support for rt53xx wireless chipset family to the
          rt2800usb driver.
diff --git a/drivers/net/wireless/rtl818x/Kconfig b/drivers/net/wireless/rtl818x/Kconfig
index 17d80fe556de..30332175bcd8 100644
--- a/drivers/net/wireless/rtl818x/Kconfig
+++ b/drivers/net/wireless/rtl818x/Kconfig
@@ -3,7 +3,7 @@
 #
 config RTL8180
 	tristate "Realtek 8180/8185 PCI support"
-	depends on MAC80211 && PCI && EXPERIMENTAL
+	depends on MAC80211 && PCI
 	select EEPROM_93CX6
 	---help---
 	  This is a driver for RTL8180 and RTL8185 based cards.
diff --git a/drivers/net/wireless/zd1211rw/Kconfig b/drivers/net/wireless/zd1211rw/Kconfig
index 5f809695f71a..96c8e1de0879 100644
--- a/drivers/net/wireless/zd1211rw/Kconfig
+++ b/drivers/net/wireless/zd1211rw/Kconfig
@@ -1,6 +1,6 @@
 config ZD1211RW
 	tristate "ZyDAS ZD1211/ZD1211B USB-wireless support"
-	depends on USB && MAC80211 && EXPERIMENTAL
+	depends on USB && MAC80211
 	select FW_LOADER
 	---help---
 	  This is an experimental driver for the ZyDAS ZD1211/ZD1211B wireless