mipsnet: Move the MIPS driver

Move the MIPS drivers into drivers/net/ethernet/ and
make the necessary Kconfig and Makefile changes.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 345 deletions

diff --git a/drivers/net/mipsnet.c b/drivers/net/mipsnet.c
deleted file mode 100644
index 004e64ab1f95..000000000000
--- a/drivers/net/mipsnet.c
+++ /dev/null
@@ -1,345 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <asm/mips-boards/simint.h>
-
-#define MIPSNET_VERSION "2007-11-17"
-
-/*
- * Net status/control block as seen by sw in the core.
- */
-struct mipsnet_regs {
-	/*
-	 * Device info for probing, reads as MIPSNET%d where %d is some
-	 * form of version.
-	 */
-	u64 devId;		/*0x00 */
-
-	/*
-	 * read only busy flag.
-	 * Set and cleared by the Net Device to indicate that an rx or a tx
-	 * is in progress.
-	 */
-	u32 busy;		/*0x08 */
-
-	/*
-	 * Set by the Net Device.
-	 * The device will set it once data has been received.
-	 * The value is the number of bytes that should be read from
-	 * rxDataBuffer.  The value will decrease till 0 until all the data
-	 * from rxDataBuffer has been read.
-	 */
-	u32 rxDataCount;	/*0x0c */
-#define MIPSNET_MAX_RXTX_DATACOUNT (1 << 16)
-
-	/*
-	 * Settable from the MIPS core, cleared by the Net Device.
-	 * The core should set the number of bytes it wants to send,
-	 * then it should write those bytes of data to txDataBuffer.
-	 * The device will clear txDataCount has been processed (not
-	 * necessarily sent).
-	 */
-	u32 txDataCount;	/*0x10 */
-
-	/*
-	 * Interrupt control
-	 *
-	 * Used to clear the interrupted generated by this dev.
-	 * Write a 1 to clear the interrupt. (except bit31).
-	 *
-	 * Bit0 is set if it was a tx-done interrupt.
-	 * Bit1 is set when new rx-data is available.
-	 *    Until this bit is cleared there will be no other RXs.
-	 *
-	 * Bit31 is used for testing, it clears after a read.
-	 *    Writing 1 to this bit will cause an interrupt to be generated.
-	 *    To clear the test interrupt, write 0 to this register.
-	 */
-	u32 interruptControl;	/*0x14 */
-#define MIPSNET_INTCTL_TXDONE     (1u << 0)
-#define MIPSNET_INTCTL_RXDONE     (1u << 1)
-#define MIPSNET_INTCTL_TESTBIT    (1u << 31)
-
-	/*
-	 * Readonly core-specific interrupt info for the device to signal
-	 * the core. The meaning of the contents of this field might change.
-	 */
-	/* XXX: the whole memIntf interrupt scheme is messy: the device
-	 * should have no control what so ever of what VPE/register set is
-	 * being used.
-	 * The MemIntf should only expose interrupt lines, and something in
-	 * the config should be responsible for the line<->core/vpe bindings.
-	 */
-	u32 interruptInfo;	/*0x18 */
-
-	/*
-	 * This is where the received data is read out.
-	 * There is more data to read until rxDataReady is 0.
-	 * Only 1 byte at this regs offset is used.
-	 */
-	u32 rxDataBuffer;	/*0x1c */
-
-	/*
-	 * This is where the data to transmit is written.
-	 * Data should be written for the amount specified in the
-	 * txDataCount register.
-	 * Only 1 byte at this regs offset is used.
-	 */
-	u32 txDataBuffer;	/*0x20 */
-};
-
-#define regaddr(dev, field) \
-  (dev->base_addr + offsetof(struct mipsnet_regs, field))
-
-static char mipsnet_string[] = "mipsnet";
-
-/*
- * Copy data from the MIPSNET rx data port
- */
-static int ioiocpy_frommipsnet(struct net_device *dev, unsigned char *kdata,
-			int len)
-{
-	for (; len > 0; len--, kdata++)
-		*kdata = inb(regaddr(dev, rxDataBuffer));
-
-	return inl(regaddr(dev, rxDataCount));
-}
-
-static inline void mipsnet_put_todevice(struct net_device *dev,
-	struct sk_buff *skb)
-{
-	int count_to_go = skb->len;
-	char *buf_ptr = skb->data;
-
-	outl(skb->len, regaddr(dev, txDataCount));
-
-	for (; count_to_go; buf_ptr++, count_to_go--)
-		outb(*buf_ptr, regaddr(dev, txDataBuffer));
-
-	dev->stats.tx_packets++;
-	dev->stats.tx_bytes += skb->len;
-
-	dev_kfree_skb(skb);
-}
-
-static int mipsnet_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	/*
-	 * Only one packet at a time. Once TXDONE interrupt is serviced, the
-	 * queue will be restarted.
-	 */
-	netif_stop_queue(dev);
-	mipsnet_put_todevice(dev, skb);
-
-	return NETDEV_TX_OK;
-}
-
-static inline ssize_t mipsnet_get_fromdev(struct net_device *dev, size_t len)
-{
-	struct sk_buff *skb;
-
-	if (!len)
-		return len;
-
-	skb = dev_alloc_skb(len + NET_IP_ALIGN);
-	if (!skb) {
-		dev->stats.rx_dropped++;
-		return -ENOMEM;
-	}
-
-	skb_reserve(skb, NET_IP_ALIGN);
-	if (ioiocpy_frommipsnet(dev, skb_put(skb, len), len))
-		return -EFAULT;
-
-	skb->protocol = eth_type_trans(skb, dev);
-	skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-	netif_rx(skb);
-
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += len;
-
-	return len;
-}
-
-static irqreturn_t mipsnet_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	u32 int_flags;
-	irqreturn_t ret = IRQ_NONE;
-
-	if (irq != dev->irq)
-		goto out_badirq;
-
-	/* TESTBIT is cleared on read. */
-	int_flags = inl(regaddr(dev, interruptControl));
-	if (int_flags & MIPSNET_INTCTL_TESTBIT) {
-		/* TESTBIT takes effect after a write with 0. */
-		outl(0, regaddr(dev, interruptControl));
-		ret = IRQ_HANDLED;
-	} else if (int_flags & MIPSNET_INTCTL_TXDONE) {
-		/* Only one packet at a time, we are done. */
-		dev->stats.tx_packets++;
-		netif_wake_queue(dev);
-		outl(MIPSNET_INTCTL_TXDONE,
-		     regaddr(dev, interruptControl));
-		ret = IRQ_HANDLED;
-	} else if (int_flags & MIPSNET_INTCTL_RXDONE) {
-		mipsnet_get_fromdev(dev, inl(regaddr(dev, rxDataCount)));
-		outl(MIPSNET_INTCTL_RXDONE, regaddr(dev, interruptControl));
-		ret = IRQ_HANDLED;
-	}
-	return ret;
-
-out_badirq:
-	printk(KERN_INFO "%s: %s(): irq %d for unknown device\n",
-	       dev->name, __func__, irq);
-	return ret;
-}
-
-static int mipsnet_open(struct net_device *dev)
-{
-	int err;
-
-	err = request_irq(dev->irq, mipsnet_interrupt,
-			  IRQF_SHARED, dev->name, (void *) dev);
-	if (err) {
-		release_region(dev->base_addr, sizeof(struct mipsnet_regs));
-		return err;
-	}
-
-	netif_start_queue(dev);
-
-	/* test interrupt handler */
-	outl(MIPSNET_INTCTL_TESTBIT, regaddr(dev, interruptControl));
-
-	return 0;
-}
-
-static int mipsnet_close(struct net_device *dev)
-{
-	netif_stop_queue(dev);
-	free_irq(dev->irq, dev);
-	return 0;
-}
-
-static void mipsnet_set_mclist(struct net_device *dev)
-{
-}
-
-static const struct net_device_ops mipsnet_netdev_ops = {
-	.ndo_open		= mipsnet_open,
-	.ndo_stop		= mipsnet_close,
-	.ndo_start_xmit		= mipsnet_xmit,
-	.ndo_set_multicast_list	= mipsnet_set_mclist,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
-};
-
-static int __devinit mipsnet_probe(struct platform_device *dev)
-{
-	struct net_device *netdev;
-	int err;
-
-	netdev = alloc_etherdev(0);
-	if (!netdev) {
-		err = -ENOMEM;
-		goto out;
-	}
-
-	platform_set_drvdata(dev, netdev);
-
-	netdev->netdev_ops = &mipsnet_netdev_ops;
-
-	/*
-	 * TODO: probe for these or load them from PARAM
-	 */
-	netdev->base_addr = 0x4200;
-	netdev->irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB0 +
-		      inl(regaddr(netdev, interruptInfo));
-
-	/* Get the io region now, get irq on open() */
-	if (!request_region(netdev->base_addr, sizeof(struct mipsnet_regs),
-			    "mipsnet")) {
-		err = -EBUSY;
-		goto out_free_netdev;
-	}
-
-	/*
-	 * Lacking any better mechanism to allocate a MAC address we use a
-	 * random one ...
-	 */
-	random_ether_addr(netdev->dev_addr);
-
-	err = register_netdev(netdev);
-	if (err) {
-		printk(KERN_ERR "MIPSNet: failed to register netdev.\n");
-		goto out_free_region;
-	}
-
-	return 0;
-
-out_free_region:
-	release_region(netdev->base_addr, sizeof(struct mipsnet_regs));
-
-out_free_netdev:
-	free_netdev(netdev);
-
-out:
-	return err;
-}
-
-static int __devexit mipsnet_device_remove(struct platform_device *device)
-{
-	struct net_device *dev = platform_get_drvdata(device);
-
-	unregister_netdev(dev);
-	release_region(dev->base_addr, sizeof(struct mipsnet_regs));
-	free_netdev(dev);
-	platform_set_drvdata(device, NULL);
-
-	return 0;
-}
-
-static struct platform_driver mipsnet_driver = {
-	.driver = {
-		.name		= mipsnet_string,
-		.owner		= THIS_MODULE,
-	},
-	.probe		= mipsnet_probe,
-	.remove		= __devexit_p(mipsnet_device_remove),
-};
-
-static int __init mipsnet_init_module(void)
-{
-	int err;
-
-	printk(KERN_INFO "MIPSNet Ethernet driver. Version: %s. "
-	       "(c)2005 MIPS Technologies, Inc.\n", MIPSNET_VERSION);
-
-	err = platform_driver_register(&mipsnet_driver);
-	if (err)
-		printk(KERN_ERR "Driver registration failed\n");
-
-	return err;
-}
-
-static void __exit mipsnet_exit_module(void)
-{
-	platform_driver_unregister(&mipsnet_driver);
-}
-
-module_init(mipsnet_init_module);
-module_exit(mipsnet_exit_module);