summaryrefslogtreecommitdiffstats
path: root/drivers/mtd
diff options
context:
space:
mode:
authorChuanxiao Dong <chuanxiao.dong@intel.com>2010-08-12 10:07:18 +0800
committerDavid Woodhouse <David.Woodhouse@intel.com>2010-08-12 11:10:40 +0100
commit5eab6aaaaf0149ada4afd1aebce1978e1cc5a3e7 (patch)
treebebb97e5504824c4dc857b6e6367531398dacf3a /drivers/mtd
parent7d8a26fd22c6944cb18a67c5b8d8255608a3ba98 (diff)
downloadblackbird-obmc-linux-5eab6aaaaf0149ada4afd1aebce1978e1cc5a3e7.tar.gz
blackbird-obmc-linux-5eab6aaaaf0149ada4afd1aebce1978e1cc5a3e7.zip
nand/denali: move all hardware initialization work to denali_hw_init
All hardware initialization will be done in denali_hw_init before irq handler registered Change mtd name from "DENALI NAND" to be "denali-nand" since whitespace in name can cause problems if we use cmdlinepart Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Diffstat (limited to 'drivers/mtd')
-rw-r--r--drivers/mtd/nand/denali.c11
1 files changed, 6 insertions, 5 deletions
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 017cde48f75d..532fe07cf886 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -1364,18 +1364,18 @@ static void denali_hw_init(struct denali_nand_info *denali)
* */
denali->bbtskipbytes = ioread32(denali->flash_reg +
SPARE_AREA_SKIP_BYTES);
- denali_irq_init(denali);
denali_nand_reset(denali);
iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
iowrite32(CHIP_EN_DONT_CARE__FLAG,
denali->flash_reg + CHIP_ENABLE_DONT_CARE);
- iowrite32(0x0, denali->flash_reg + SPARE_AREA_SKIP_BYTES);
iowrite32(0xffff, denali->flash_reg + SPARE_AREA_MARKER);
/* Should set value for these registers when init */
iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
iowrite32(1, denali->flash_reg + ECC_ENABLE);
+ denali_nand_timing_set(denali);
+ denali_irq_init(denali);
}
/* Althogh controller spec said SLC ECC is forceb to be 4bit,
@@ -1501,6 +1501,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
pci_set_master(dev);
denali->dev = dev;
+ denali->mtd.dev.parent = &dev->dev;
ret = pci_request_regions(dev, DENALI_NAND_NAME);
if (ret) {
@@ -1525,6 +1526,8 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
denali_hw_init(denali);
denali_drv_init(denali);
+ /* denali_isr register is done after all the hardware
+ * initilization is finished*/
if (request_irq(dev->irq, denali_isr, IRQF_SHARED,
DENALI_NAND_NAME, denali)) {
printk(KERN_ERR "Spectra: Unable to allocate IRQ\n");
@@ -1537,9 +1540,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
pci_set_drvdata(dev, denali);
- denali_nand_timing_set(denali);
-
- denali->mtd.name = "Denali NAND";
+ denali->mtd.name = "denali-nand";
denali->mtd.owner = THIS_MODULE;
denali->mtd.priv = &denali->nand;
OpenPOWER on IntegriCloud