mfd: stmpe: Rework registers access

this update allows to use registers map as following :
regs[reg_index + offset] instead of
regs[reg_index] + offset

This makes code clearer and will facilitate the addition of STMPE1600
on which LSB and MSB registers are respectively located at addr and addr + 1.
Despite for all others STMPE variant, LSB and MSB registers are respectively
located in reverse order at addr + 1 and addr.

For variant which have 3 registers's bank, we use LSB,CSB and MSB indexes
which contains respectively LSB (or LOW), CSB (or MID) and MSB (or HIGH)
register addresses (STMPE1801/STMPE24xx).
For variant which have 2 registers's bank, we use LSB and CSB indexes only.
In this case the CSB index contains the MSB regs address (STMPE 1601).

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

1 files changed, 43 insertions, 6 deletions

diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h
index 4ba112362167..f1273420c8e8 100644
--- a/drivers/mfd/stmpe.h
+++ b/drivers/mfd/stmpe.h
@@ -179,19 +179,32 @@ int stmpe_remove(struct stmpe *stmpe);
 
 #define STMPE1601_REG_SYS_CTRL			0x02
 #define STMPE1601_REG_SYS_CTRL2			0x03
+#define STMPE1601_REG_ICR_MSB			0x10
 #define STMPE1601_REG_ICR_LSB			0x11
+#define STMPE1601_REG_IER_MSB			0x12
 #define STMPE1601_REG_IER_LSB			0x13
 #define STMPE1601_REG_ISR_MSB			0x14
-#define STMPE1601_REG_CHIP_ID			0x80
+#define STMPE1601_REG_ISR_LSB			0x15
+#define STMPE1601_REG_INT_EN_GPIO_MASK_MSB	0x16
 #define STMPE1601_REG_INT_EN_GPIO_MASK_LSB	0x17
 #define STMPE1601_REG_INT_STA_GPIO_MSB		0x18
-#define STMPE1601_REG_GPIO_MP_LSB		0x87
+#define STMPE1601_REG_INT_STA_GPIO_LSB		0x19
+#define STMPE1601_REG_CHIP_ID			0x80
+#define STMPE1601_REG_GPIO_SET_MSB		0x82
 #define STMPE1601_REG_GPIO_SET_LSB		0x83
+#define STMPE1601_REG_GPIO_CLR_MSB		0x84
 #define STMPE1601_REG_GPIO_CLR_LSB		0x85
+#define STMPE1601_REG_GPIO_MP_MSB		0x86
+#define STMPE1601_REG_GPIO_MP_LSB		0x87
+#define STMPE1601_REG_GPIO_SET_DIR_MSB		0x88
 #define STMPE1601_REG_GPIO_SET_DIR_LSB		0x89
 #define STMPE1601_REG_GPIO_ED_MSB		0x8A
+#define STMPE1601_REG_GPIO_ED_LSB		0x8B
+#define STMPE1601_REG_GPIO_RE_MSB		0x8C
 #define STMPE1601_REG_GPIO_RE_LSB		0x8D
+#define STMPE1601_REG_GPIO_FE_MSB		0x8E
 #define STMPE1601_REG_GPIO_FE_LSB		0x8F
+#define STMPE1601_REG_GPIO_PU_MSB		0x90
 #define STMPE1601_REG_GPIO_PU_LSB		0x91
 #define STMPE1601_REG_GPIO_AF_U_MSB		0x92
 
@@ -267,23 +280,47 @@ int stmpe_remove(struct stmpe *stmpe);
 
 #define STMPE24XX_REG_SYS_CTRL		0x02
 #define STMPE24XX_REG_SYS_CTRL2		0x03
+#define STMPE24XX_REG_ICR_MSB		0x10
 #define STMPE24XX_REG_ICR_LSB		0x11
+#define STMPE24XX_REG_IER_MSB		0x12
 #define STMPE24XX_REG_IER_LSB		0x13
 #define STMPE24XX_REG_ISR_MSB		0x14
-#define STMPE24XX_REG_CHIP_ID		0x80
+#define STMPE24XX_REG_ISR_LSB		0x15
+#define STMPE24XX_REG_IEGPIOR_MSB	0x16
+#define STMPE24XX_REG_IEGPIOR_CSB	0x17
 #define STMPE24XX_REG_IEGPIOR_LSB	0x18
 #define STMPE24XX_REG_ISGPIOR_MSB	0x19
-#define STMPE24XX_REG_GPMR_LSB		0xA4
+#define STMPE24XX_REG_ISGPIOR_CSB	0x1A
+#define STMPE24XX_REG_ISGPIOR_LSB	0x1B
+#define STMPE24XX_REG_CHIP_ID		0x80
+#define STMPE24XX_REG_GPSR_MSB		0x83
+#define STMPE24XX_REG_GPSR_CSB		0x84
 #define STMPE24XX_REG_GPSR_LSB		0x85
+#define STMPE24XX_REG_GPCR_MSB		0x86
+#define STMPE24XX_REG_GPCR_CSB		0x87
 #define STMPE24XX_REG_GPCR_LSB		0x88
+#define STMPE24XX_REG_GPDR_MSB		0x89
+#define STMPE24XX_REG_GPDR_CSB		0x8A
 #define STMPE24XX_REG_GPDR_LSB		0x8B
 #define STMPE24XX_REG_GPEDR_MSB		0x8C
+#define STMPE24XX_REG_GPEDR_CSB		0x8D
+#define STMPE24XX_REG_GPEDR_LSB		0x8E
+#define STMPE24XX_REG_GPRER_MSB		0x8F
+#define STMPE24XX_REG_GPRER_CSB		0x90
 #define STMPE24XX_REG_GPRER_LSB		0x91
+#define STMPE24XX_REG_GPFER_MSB		0x92
+#define STMPE24XX_REG_GPFER_CSB		0x93
 #define STMPE24XX_REG_GPFER_LSB		0x94
+#define STMPE24XX_REG_GPPUR_MSB		0x95
+#define STMPE24XX_REG_GPPUR_CSB		0x96
 #define STMPE24XX_REG_GPPUR_LSB		0x97
-#define STMPE24XX_REG_GPPDR_LSB		0x9a
+#define STMPE24XX_REG_GPPDR_MSB		0x98
+#define STMPE24XX_REG_GPPDR_CSB		0x99
+#define STMPE24XX_REG_GPPDR_LSB		0x9A
 #define STMPE24XX_REG_GPAFR_U_MSB	0x9B
-
+#define STMPE24XX_REG_GPMR_MSB		0xA2
+#define STMPE24XX_REG_GPMR_CSB		0xA3
+#define STMPE24XX_REG_GPMR_LSB		0xA4
 #define STMPE24XX_SYS_CTRL_ENABLE_GPIO		(1 << 3)
 #define STMPE24XX_SYSCON_ENABLE_PWM		(1 << 2)
 #define STMPE24XX_SYS_CTRL_ENABLE_KPC		(1 << 1)