diff options
| author | Markus Pargmann <mpa@pengutronix.de> | 2015-12-14 12:41:52 -0200 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@s-opensource.com> | 2016-06-28 07:58:58 -0300 |
| commit | 78060d51950d242a3e20941b1280fcc76850634c (patch) | |
| tree | 92e50cbad67efb235d2e7b1c63a5aad8fe155d1b /drivers/media/i2c/mt9v032.c | |
| parent | f823a3fd4b54d562711ee1b7da06d9dc47c9bce7 (diff) | |
| download | blackbird-obmc-linux-78060d51950d242a3e20941b1280fcc76850634c.tar.gz blackbird-obmc-linux-78060d51950d242a3e20941b1280fcc76850634c.zip | |
[media] v4l: mt9v032: Do not unset master_mode
The power_on function of the driver resets the chip and sets the
CHIP_CONTROL register to 0. This switches the operating mode to slave.
The s_stream function sets the correct mode. But this caused problems on
a board where the camera chip is operated as master. The camera started
after a random amount of time streaming an image, I observed between 10
and 300 seconds.
The STRFM_OUT and STLN_OUT pins are not connected on this board which
may cause some issues in slave mode. I could not find any documentation
about this.
Keeping the chip in master mode after the reset helped to fix this
issue for me.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Diffstat (limited to 'drivers/media/i2c/mt9v032.c')
| -rw-r--r-- | drivers/media/i2c/mt9v032.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/media/i2c/mt9v032.c b/drivers/media/i2c/mt9v032.c index e47fe4041034..4a5e0e5f4941 100644 --- a/drivers/media/i2c/mt9v032.c +++ b/drivers/media/i2c/mt9v032.c @@ -348,7 +348,8 @@ static int mt9v032_power_on(struct mt9v032 *mt9v032) if (ret < 0) return ret; - return regmap_write(map, MT9V032_CHIP_CONTROL, 0); + return regmap_write(map, MT9V032_CHIP_CONTROL, + MT9V032_CHIP_CONTROL_MASTER_MODE); } static void mt9v032_power_off(struct mt9v032 *mt9v032) @@ -420,8 +421,7 @@ __mt9v032_get_pad_crop(struct mt9v032 *mt9v032, struct v4l2_subdev_pad_config *c static int mt9v032_s_stream(struct v4l2_subdev *subdev, int enable) { - const u16 mode = MT9V032_CHIP_CONTROL_MASTER_MODE - | MT9V032_CHIP_CONTROL_DOUT_ENABLE + const u16 mode = MT9V032_CHIP_CONTROL_DOUT_ENABLE | MT9V032_CHIP_CONTROL_SEQUENTIAL; struct mt9v032 *mt9v032 = to_mt9v032(subdev); struct v4l2_rect *crop = &mt9v032->crop; |
