Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - some V4L2 API updates needed by embedded devices
 - DVB API extensions for ATSC-MH delivery system, used in US for mobile
   TV
 - new tuners for fc0011/0012/0013 and tua9001
 - a new dvb driver for af9033/9035
 - a new ATSC-MH frontend (lg2160)
 - new remote controller keymaps
 - Removal of a few legacy webcam driver that got replaced by gspca on
   several kernel versions ago
 - a new driver for Exynos 4/5 webcams(s5pp fimc-lite)
 - a new webcam sensor driver (smiapp)
 - a new video input driver for embedded (sta2x1xx)
 - several improvements, fixes, cleanups, etc inside the drivers.

Manually fix up conflicts due to err() -> dev_err() conversion in
drivers/staging/media/easycap/easycap_main.c

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits)
  [media] saa7134-cards: Remove a PCI entry added by mistake
  [media] radio-sf16fmi: add support for SF16-FMD
  [media] rc-loopback: remove duplicate line
  [media] patch for Asus My Cinema PS3-100 (1043:48cd)
  [media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS
  [media] em28xx: simple comment fix
  [media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2
  [media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom()
  [media] smiapp: Add support for 8-bit uncompressed formats
  [media] smiapp: Allow generic quirk registers
  [media] smiapp: Use non-binning limits if the binning limit is zero
  [media] smiapp: Initialise rval in smiapp_read_nvm()
  [media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check
  [media] smiapp: Use 8-bit reads only before identifying the sensor
  [media] smiapp: Quirk for sensors that only do 8-bit reads
  [media] smiapp: Pass struct sensor to register writing commands instead of i2c_client
  [media] smiapp: Allow using external clock from the clock framework
  [media] zl10353: change .read_snr() to report SNR as a 0.1 dB
  [media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300)
  [media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try
  ...

1 files changed, 524 insertions, 0 deletions

diff --git a/drivers/media/common/tuners/fc0011.c b/drivers/media/common/tuners/fc0011.c
new file mode 100644
index 000000000000..e4882546c283
--- /dev/null
+++ b/drivers/media/common/tuners/fc0011.c
@@ -0,0 +1,524 @@
+/*
+ * Fitipower FC0011 tuner driver
+ *
+ * Copyright (C) 2012 Michael Buesch <m@bues.ch>
+ *
+ * Derived from FC0012 tuner driver:
+ * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include "fc0011.h"
+
+
+/* Tuner registers */
+enum {
+	FC11_REG_0,
+	FC11_REG_FA,		/* FA */
+	FC11_REG_FP,		/* FP */
+	FC11_REG_XINHI,		/* XIN high 8 bit */
+	FC11_REG_XINLO,		/* XIN low 8 bit */
+	FC11_REG_VCO,		/* VCO */
+	FC11_REG_VCOSEL,	/* VCO select */
+	FC11_REG_7,		/* Unknown tuner reg 7 */
+	FC11_REG_8,		/* Unknown tuner reg 8 */
+	FC11_REG_9,
+	FC11_REG_10,		/* Unknown tuner reg 10 */
+	FC11_REG_11,		/* Unknown tuner reg 11 */
+	FC11_REG_12,
+	FC11_REG_RCCAL,		/* RC calibrate */
+	FC11_REG_VCOCAL,	/* VCO calibrate */
+	FC11_REG_15,
+	FC11_REG_16,		/* Unknown tuner reg 16 */
+	FC11_REG_17,
+
+	FC11_NR_REGS,		/* Number of registers */
+};
+
+enum FC11_REG_VCOSEL_bits {
+	FC11_VCOSEL_2		= 0x08, /* VCO select 2 */
+	FC11_VCOSEL_1		= 0x10, /* VCO select 1 */
+	FC11_VCOSEL_CLKOUT	= 0x20, /* Fix clock out */
+	FC11_VCOSEL_BW7M	= 0x40, /* 7MHz bw */
+	FC11_VCOSEL_BW6M	= 0x80, /* 6MHz bw */
+};
+
+enum FC11_REG_RCCAL_bits {
+	FC11_RCCAL_FORCE	= 0x10, /* force */
+};
+
+enum FC11_REG_VCOCAL_bits {
+	FC11_VCOCAL_RUN		= 0,	/* VCO calibration run */
+	FC11_VCOCAL_VALUEMASK	= 0x3F,	/* VCO calibration value mask */
+	FC11_VCOCAL_OK		= 0x40,	/* VCO calibration Ok */
+	FC11_VCOCAL_RESET	= 0x80, /* VCO calibration reset */
+};
+
+
+struct fc0011_priv {
+	struct i2c_adapter *i2c;
+	u8 addr;
+
+	u32 frequency;
+	u32 bandwidth;
+};
+
+
+static int fc0011_writereg(struct fc0011_priv *priv, u8 reg, u8 val)
+{
+	u8 buf[2] = { reg, val };
+	struct i2c_msg msg = { .addr = priv->addr,
+		.flags = 0, .buf = buf, .len = 2 };
+
+	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+		dev_err(&priv->i2c->dev,
+			"I2C write reg failed, reg: %02x, val: %02x\n",
+			reg, val);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int fc0011_readreg(struct fc0011_priv *priv, u8 reg, u8 *val)
+{
+	u8 dummy;
+	struct i2c_msg msg[2] = {
+		{ .addr = priv->addr,
+		  .flags = 0, .buf = &reg, .len = 1 },
+		{ .addr = priv->addr,
+		  .flags = I2C_M_RD, .buf = val ? : &dummy, .len = 1 },
+	};
+
+	if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+		dev_err(&priv->i2c->dev,
+			"I2C read failed, reg: %02x\n", reg);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int fc0011_release(struct dvb_frontend *fe)
+{
+	kfree(fe->tuner_priv);
+	fe->tuner_priv = NULL;
+
+	return 0;
+}
+
+static int fc0011_init(struct dvb_frontend *fe)
+{
+	struct fc0011_priv *priv = fe->tuner_priv;
+	int err;
+
+	if (WARN_ON(!fe->callback))
+		return -EINVAL;
+
+	err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
+			   FC0011_FE_CALLBACK_POWER, priv->addr);
+	if (err) {
+		dev_err(&priv->i2c->dev, "Power-on callback failed\n");
+		return err;
+	}
+	err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
+			   FC0011_FE_CALLBACK_RESET, priv->addr);
+	if (err) {
+		dev_err(&priv->i2c->dev, "Reset callback failed\n");
+		return err;
+	}
+
+	return 0;
+}
+
+/* Initiate VCO calibration */
+static int fc0011_vcocal_trigger(struct fc0011_priv *priv)
+{
+	int err;
+
+	err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RESET);
+	if (err)
+		return err;
+	err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+/* Read VCO calibration value */
+static int fc0011_vcocal_read(struct fc0011_priv *priv, u8 *value)
+{
+	int err;
+
+	err = fc0011_writereg(priv, FC11_REG_VCOCAL, FC11_VCOCAL_RUN);
+	if (err)
+		return err;
+	usleep_range(10000, 20000);
+	err = fc0011_readreg(priv, FC11_REG_VCOCAL, value);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int fc0011_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	struct fc0011_priv *priv = fe->tuner_priv;
+	int err;
+	unsigned int i, vco_retries;
+	u32 freq = p->frequency / 1000;
+	u32 bandwidth = p->bandwidth_hz / 1000;
+	u32 fvco, xin, xdiv, xdivr;
+	u16 frac;
+	u8 fa, fp, vco_sel, vco_cal;
+	u8 regs[FC11_NR_REGS] = { };
+
+	regs[FC11_REG_7] = 0x0F;
+	regs[FC11_REG_8] = 0x3E;
+	regs[FC11_REG_10] = 0xB8;
+	regs[FC11_REG_11] = 0x80;
+	regs[FC11_REG_RCCAL] = 0x04;
+	err = fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]);
+	err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]);
+	err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]);
+	err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]);
+	err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
+	if (err)
+		return -EIO;
+
+	/* Set VCO freq and VCO div */
+	if (freq < 54000) {
+		fvco = freq * 64;
+		regs[FC11_REG_VCO] = 0x82;
+	} else if (freq < 108000) {
+		fvco = freq * 32;
+		regs[FC11_REG_VCO] = 0x42;
+	} else if (freq < 216000) {
+		fvco = freq * 16;
+		regs[FC11_REG_VCO] = 0x22;
+	} else if (freq < 432000) {
+		fvco = freq * 8;
+		regs[FC11_REG_VCO] = 0x12;
+	} else {
+		fvco = freq * 4;
+		regs[FC11_REG_VCO] = 0x0A;
+	}
+
+	/* Calc XIN. The PLL reference frequency is 18 MHz. */
+	xdiv = fvco / 18000;
+	frac = fvco - xdiv * 18000;
+	frac = (frac << 15) / 18000;
+	if (frac >= 16384)
+		frac += 32786;
+	if (!frac)
+		xin = 0;
+	else if (frac < 511)
+		xin = 512;
+	else if (frac < 65026)
+		xin = frac;
+	else
+		xin = 65024;
+	regs[FC11_REG_XINHI] = xin >> 8;
+	regs[FC11_REG_XINLO] = xin;
+
+	/* Calc FP and FA */
+	xdivr = xdiv;
+	if (fvco - xdiv * 18000 >= 9000)
+		xdivr += 1; /* round */
+	fp = xdivr / 8;
+	fa = xdivr - fp * 8;
+	if (fa < 2) {
+		fp -= 1;
+		fa += 8;
+	}
+	if (fp > 0x1F) {
+		fp &= 0x1F;
+		fa &= 0xF;
+	}
+	if (fa >= fp) {
+		dev_warn(&priv->i2c->dev,
+			 "fa %02X >= fp %02X, but trying to continue\n",
+			 (unsigned int)(u8)fa, (unsigned int)(u8)fp);
+	}
+	regs[FC11_REG_FA] = fa;
+	regs[FC11_REG_FP] = fp;
+
+	/* Select bandwidth */
+	switch (bandwidth) {
+	case 8000:
+		break;
+	case 7000:
+		regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW7M;
+		break;
+	default:
+		dev_warn(&priv->i2c->dev, "Unsupported bandwidth %u kHz. "
+			 "Using 6000 kHz.\n",
+			 bandwidth);
+		bandwidth = 6000;
+		/* fallthrough */
+	case 6000:
+		regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_BW6M;
+		break;
+	}
+
+	/* Pre VCO select */
+	if (fvco < 2320000) {
+		vco_sel = 0;
+		regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+	} else if (fvco < 3080000) {
+		vco_sel = 1;
+		regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+		regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
+	} else {
+		vco_sel = 2;
+		regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+		regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
+	}
+
+	/* Fix for low freqs */
+	if (freq < 45000) {
+		regs[FC11_REG_FA] = 0x6;
+		regs[FC11_REG_FP] = 0x11;
+	}
+
+	/* Clock out fix */
+	regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_CLKOUT;
+
+	/* Write the cached registers */
+	for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++) {
+		err = fc0011_writereg(priv, i, regs[i]);
+		if (err)
+			return err;
+	}
+
+	/* VCO calibration */
+	err = fc0011_vcocal_trigger(priv);
+	if (err)
+		return err;
+	err = fc0011_vcocal_read(priv, &vco_cal);
+	if (err)
+		return err;
+	vco_retries = 0;
+	while (!(vco_cal & FC11_VCOCAL_OK) && vco_retries < 3) {
+		/* Reset the tuner and try again */
+		err = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
+				   FC0011_FE_CALLBACK_RESET, priv->addr);
+		if (err) {
+			dev_err(&priv->i2c->dev, "Failed to reset tuner\n");
+			return err;
+		}
+		/* Reinit tuner config */
+		err = 0;
+		for (i = FC11_REG_FA; i <= FC11_REG_VCOSEL; i++)
+			err |= fc0011_writereg(priv, i, regs[i]);
+		err |= fc0011_writereg(priv, FC11_REG_7, regs[FC11_REG_7]);
+		err |= fc0011_writereg(priv, FC11_REG_8, regs[FC11_REG_8]);
+		err |= fc0011_writereg(priv, FC11_REG_10, regs[FC11_REG_10]);
+		err |= fc0011_writereg(priv, FC11_REG_11, regs[FC11_REG_11]);
+		err |= fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
+		if (err)
+			return -EIO;
+		/* VCO calibration */
+		err = fc0011_vcocal_trigger(priv);
+		if (err)
+			return err;
+		err = fc0011_vcocal_read(priv, &vco_cal);
+		if (err)
+			return err;
+		vco_retries++;
+	}
+	if (!(vco_cal & FC11_VCOCAL_OK)) {
+		dev_err(&priv->i2c->dev,
+			"Failed to read VCO calibration value (got %02X)\n",
+			(unsigned int)vco_cal);
+		return -EIO;
+	}
+	vco_cal &= FC11_VCOCAL_VALUEMASK;
+
+	switch (vco_sel) {
+	case 0:
+		if (vco_cal < 8) {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			if (err)
+				return err;
+			err = fc0011_vcocal_trigger(priv);
+			if (err)
+				return err;
+		} else {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			if (err)
+				return err;
+		}
+		break;
+	case 1:
+		if (vco_cal < 5) {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			if (err)
+				return err;
+			err = fc0011_vcocal_trigger(priv);
+			if (err)
+				return err;
+		} else if (vco_cal <= 48) {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			if (err)
+				return err;
+		} else {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			if (err)
+				return err;
+			err = fc0011_vcocal_trigger(priv);
+			if (err)
+				return err;
+		}
+		break;
+	case 2:
+		if (vco_cal > 53) {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_1;
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			if (err)
+				return err;
+			err = fc0011_vcocal_trigger(priv);
+			if (err)
+				return err;
+		} else {
+			regs[FC11_REG_VCOSEL] &= ~(FC11_VCOSEL_1 | FC11_VCOSEL_2);
+			regs[FC11_REG_VCOSEL] |= FC11_VCOSEL_2;
+			err = fc0011_writereg(priv, FC11_REG_VCOSEL,
+					      regs[FC11_REG_VCOSEL]);
+			if (err)
+				return err;
+		}
+		break;
+	}
+	err = fc0011_vcocal_read(priv, NULL);
+	if (err)
+		return err;
+	usleep_range(10000, 50000);
+
+	err = fc0011_readreg(priv, FC11_REG_RCCAL, &regs[FC11_REG_RCCAL]);
+	if (err)
+		return err;
+	regs[FC11_REG_RCCAL] |= FC11_RCCAL_FORCE;
+	err = fc0011_writereg(priv, FC11_REG_RCCAL, regs[FC11_REG_RCCAL]);
+	if (err)
+		return err;
+	err = fc0011_writereg(priv, FC11_REG_16, 0xB);
+	if (err)
+		return err;
+
+	dev_dbg(&priv->i2c->dev, "Tuned to "
+		"fa=%02X fp=%02X xin=%02X%02X vco=%02X vcosel=%02X "
+		"vcocal=%02X(%u) bw=%u\n",
+		(unsigned int)regs[FC11_REG_FA],
+		(unsigned int)regs[FC11_REG_FP],
+		(unsigned int)regs[FC11_REG_XINHI],
+		(unsigned int)regs[FC11_REG_XINLO],
+		(unsigned int)regs[FC11_REG_VCO],
+		(unsigned int)regs[FC11_REG_VCOSEL],
+		(unsigned int)vco_cal, vco_retries,
+		(unsigned int)bandwidth);
+
+	priv->frequency = p->frequency;
+	priv->bandwidth = p->bandwidth_hz;
+
+	return 0;
+}
+
+static int fc0011_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct fc0011_priv *priv = fe->tuner_priv;
+
+	*frequency = priv->frequency;
+
+	return 0;
+}
+
+static int fc0011_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	*frequency = 0;
+
+	return 0;
+}
+
+static int fc0011_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+	struct fc0011_priv *priv = fe->tuner_priv;
+
+	*bandwidth = priv->bandwidth;
+
+	return 0;
+}
+
+static const struct dvb_tuner_ops fc0011_tuner_ops = {
+	.info = {
+		.name		= "Fitipower FC0011",
+
+		.frequency_min	= 45000000,
+		.frequency_max	= 1000000000,
+	},
+
+	.release		= fc0011_release,
+	.init			= fc0011_init,
+
+	.set_params		= fc0011_set_params,
+
+	.get_frequency		= fc0011_get_frequency,
+	.get_if_frequency	= fc0011_get_if_frequency,
+	.get_bandwidth		= fc0011_get_bandwidth,
+};
+
+struct dvb_frontend *fc0011_attach(struct dvb_frontend *fe,
+				   struct i2c_adapter *i2c,
+				   const struct fc0011_config *config)
+{
+	struct fc0011_priv *priv;
+
+	priv = kzalloc(sizeof(struct fc0011_priv), GFP_KERNEL);
+	if (!priv)
+		return NULL;
+
+	priv->i2c = i2c;
+	priv->addr = config->i2c_address;
+
+	fe->tuner_priv = priv;
+	fe->ops.tuner_ops = fc0011_tuner_ops;
+
+	dev_info(&priv->i2c->dev, "Fitipower FC0011 tuner attached\n");
+
+	return fe;
+}
+EXPORT_SYMBOL(fc0011_attach);
+
+MODULE_DESCRIPTION("Fitipower FC0011 silicon tuner driver");
+MODULE_AUTHOR("Michael Buesch <m@bues.ch>");
+MODULE_LICENSE("GPL");