Merge tag 'staging-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver updates from Greg KH:
 "Here's the big staging and iio driver update for 4.7-rc1.

  I think we almost broke even with this release, only adding a few more
  lines than we removed, which isn't bad overall given that there's a
  bunch of new iio drivers added.

  The Lustre developers seem to have woken up from their sleep and have
  been doing a great job in cleaning up the code and pruning unused or
  old cruft, the filesystem is almost readable :)

  Other than that, just a lot of basic coding style cleanups in the
  churn.  All have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (938 commits)
  Staging: emxx_udc: emxx_udc: fixed coding style issue
  staging/gdm724x: fix "alignment should match open parenthesis" issues
  staging/gdm724x: Fix avoid CamelCase
  staging: unisys: rename misleading var ii with frag
  staging: unisys: visorhba: switch success handling to error handling
  staging: unisys: visorhba: main path needs to flow down the left margin
  staging: unisys: visorinput: handle_locking_key() simplifications
  staging: unisys: visorhba: fail gracefully for thread creation failures
  staging: unisys: visornic: comment restructuring and removing bad diction
  staging: unisys: fix format string %Lx to %llx for u64
  staging: unisys: remove unused struct members
  staging: unisys: visorchannel: correct variable misspelling
  staging: unisys: visorhba: replace functionlike macro with function
  staging: dgnc: Need to check for NULL of ch
  staging: dgnc: remove redundant condition check
  staging: dgnc: fix 'line over 80 characters'
  staging: dgnc: clean up the dgnc_get_modem_info()
  staging: lustre: lnet: enable configuration per NI interface
  staging: lustre: o2iblnd: properly set ibr_why
  staging: lustre: o2iblnd: remove last of kiblnd_tunables_fini
  ...

1 files changed, 17 insertions, 20 deletions

diff --git a/drivers/iio/adc/mxs-lradc.c b/drivers/iio/adc/mxs-lradc.c
index 33051b87aac2..ad26da1edbee 100644
--- a/drivers/iio/adc/mxs-lradc.c
+++ b/drivers/iio/adc/mxs-lradc.c
@@ -686,6 +686,17 @@ static void mxs_lradc_prepare_pressure(struct mxs_lradc *lradc)
 
 static void mxs_lradc_enable_touch_detection(struct mxs_lradc *lradc)
 {
+	/* Configure the touchscreen type */
+	if (lradc->soc == IMX28_LRADC) {
+		mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
+				    LRADC_CTRL0);
+
+		if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
+			mxs_lradc_reg_set(lradc,
+					  LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
+					  LRADC_CTRL0);
+	}
+
 	mxs_lradc_setup_touch_detection(lradc);
 
 	lradc->cur_plate = LRADC_TOUCH;
@@ -1127,6 +1138,7 @@ static int mxs_lradc_ts_register(struct mxs_lradc *lradc)
 	__set_bit(EV_ABS, input->evbit);
 	__set_bit(EV_KEY, input->evbit);
 	__set_bit(BTN_TOUCH, input->keybit);
+	__set_bit(INPUT_PROP_DIRECT, input->propbit);
 	input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
 	input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
 	input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK,
@@ -1475,18 +1487,13 @@ static const struct iio_chan_spec mx28_lradc_chan_spec[] = {
 	MXS_ADC_CHAN(15, IIO_VOLTAGE, "VDD5V"),
 };
 
-static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
+static void mxs_lradc_hw_init(struct mxs_lradc *lradc)
 {
 	/* The ADC always uses DELAY CHANNEL 0. */
 	const u32 adc_cfg =
 		(1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) |
 		(LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET);
 
-	int ret = stmp_reset_block(lradc->base);
-
-	if (ret)
-		return ret;
-
 	/* Configure DELAY CHANNEL 0 for generic ADC sampling. */
 	mxs_lradc_reg_wrt(lradc, adc_cfg, LRADC_DELAY(0));
 
@@ -1495,20 +1502,8 @@ static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
 	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
 	mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
 
-	/* Configure the touchscreen type */
-	if (lradc->soc == IMX28_LRADC) {
-		mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
-				    LRADC_CTRL0);
-
-	if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
-		mxs_lradc_reg_set(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
-				  LRADC_CTRL0);
-	}
-
 	/* Start internal temperature sensing. */
 	mxs_lradc_reg_wrt(lradc, 0, LRADC_CTRL2);
-
-	return 0;
 }
 
 static void mxs_lradc_hw_stop(struct mxs_lradc *lradc)
@@ -1708,11 +1703,13 @@ static int mxs_lradc_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* Configure the hardware. */
-	ret = mxs_lradc_hw_init(lradc);
+	ret = stmp_reset_block(lradc->base);
 	if (ret)
 		goto err_dev;
 
+	/* Configure the hardware. */
+	mxs_lradc_hw_init(lradc);
+
 	/* Register the touchscreen input device. */
 	if (touch_ret == 0) {
 		ret = mxs_lradc_ts_register(lradc);