iio: adc: add exynos adc driver under iio framwork

This patch adds New driver to support:
1. Supports ADC IF found on EXYNOS4412/EXYNOS5250
   and future SoCs from Samsung
2. Add ADC driver under iio/adc framework
3. Also adds the Documentation for device tree bindings

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

1 files changed, 440 insertions, 0 deletions

diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
new file mode 100644
index 000000000000..ed6fdd7e5212
--- /dev/null
+++ b/drivers/iio/adc/exynos_adc.c
@@ -0,0 +1,440 @@
+/*
+ *  exynos_adc.c - Support for ADC in EXYNOS SoCs
+ *
+ *  8 ~ 10 channel, 10/12-bit ADC
+ *
+ *  Copyright (C) 2013 Naveen Krishna Chatradhi <ch.naveen@samsung.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_platform.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+
+enum adc_version {
+	ADC_V1,
+	ADC_V2
+};
+
+/* EXYNOS4412/5250 ADC_V1 registers definitions */
+#define ADC_V1_CON(x)		((x) + 0x00)
+#define ADC_V1_DLY(x)		((x) + 0x08)
+#define ADC_V1_DATX(x)		((x) + 0x0C)
+#define ADC_V1_INTCLR(x)	((x) + 0x18)
+#define ADC_V1_MUX(x)		((x) + 0x1c)
+
+/* Future ADC_V2 registers definitions */
+#define ADC_V2_CON1(x)		((x) + 0x00)
+#define ADC_V2_CON2(x)		((x) + 0x04)
+#define ADC_V2_STAT(x)		((x) + 0x08)
+#define ADC_V2_INT_EN(x)	((x) + 0x10)
+#define ADC_V2_INT_ST(x)	((x) + 0x14)
+#define ADC_V2_VER(x)		((x) + 0x20)
+
+/* Bit definitions for ADC_V1 */
+#define ADC_V1_CON_RES		(1u << 16)
+#define ADC_V1_CON_PRSCEN	(1u << 14)
+#define ADC_V1_CON_PRSCLV(x)	(((x) & 0xFF) << 6)
+#define ADC_V1_CON_STANDBY	(1u << 2)
+
+/* Bit definitions for ADC_V2 */
+#define ADC_V2_CON1_SOFT_RESET	(1u << 2)
+
+#define ADC_V2_CON2_OSEL	(1u << 10)
+#define ADC_V2_CON2_ESEL	(1u << 9)
+#define ADC_V2_CON2_HIGHF	(1u << 8)
+#define ADC_V2_CON2_C_TIME(x)	(((x) & 7) << 4)
+#define ADC_V2_CON2_ACH_SEL(x)	(((x) & 0xF) << 0)
+#define ADC_V2_CON2_ACH_MASK	0xF
+
+#define MAX_ADC_V2_CHANNELS	10
+#define MAX_ADC_V1_CHANNELS	8
+
+/* Bit definitions common for ADC_V1 and ADC_V2 */
+#define ADC_CON_EN_START	(1u << 0)
+#define ADC_DATX_MASK		0xFFF
+
+#define EXYNOS_ADC_TIMEOUT	(msecs_to_jiffies(1000))
+
+struct exynos_adc {
+	void __iomem		*regs;
+	struct clk		*clk;
+	unsigned int		irq;
+	struct regulator	*vdd;
+
+	struct completion	completion;
+
+	u32			value;
+	unsigned int            version;
+};
+
+static const struct of_device_id exynos_adc_match[] = {
+	{ .compatible = "samsung,exynos-adc-v1", .data = (void *)ADC_V1 },
+	{ .compatible = "samsung,exynos-adc-v2", .data = (void *)ADC_V2 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos_adc_match);
+
+static inline unsigned int exynos_adc_get_version(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+
+	match = of_match_node(exynos_adc_match, pdev->dev.of_node);
+	return (unsigned int)match->data;
+}
+
+static int exynos_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val,
+				int *val2,
+				long mask)
+{
+	struct exynos_adc *info = iio_priv(indio_dev);
+	unsigned long timeout;
+	u32 con1, con2;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	mutex_lock(&indio_dev->mlock);
+
+	/* Select the channel to be used and Trigger conversion */
+	if (info->version == ADC_V2) {
+		con2 = readl(ADC_V2_CON2(info->regs));
+		con2 &= ~ADC_V2_CON2_ACH_MASK;
+		con2 |= ADC_V2_CON2_ACH_SEL(chan->address);
+		writel(con2, ADC_V2_CON2(info->regs));
+
+		con1 = readl(ADC_V2_CON1(info->regs));
+		writel(con1 | ADC_CON_EN_START,
+				ADC_V2_CON1(info->regs));
+	} else {
+		writel(chan->address, ADC_V1_MUX(info->regs));
+
+		con1 = readl(ADC_V1_CON(info->regs));
+		writel(con1 | ADC_CON_EN_START,
+				ADC_V1_CON(info->regs));
+	}
+
+	timeout = wait_for_completion_interruptible_timeout
+			(&info->completion, EXYNOS_ADC_TIMEOUT);
+	*val = info->value;
+
+	mutex_unlock(&indio_dev->mlock);
+
+	if (timeout == 0)
+		return -ETIMEDOUT;
+
+	return IIO_VAL_INT;
+}
+
+static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
+{
+	struct exynos_adc *info = (struct exynos_adc *)dev_id;
+
+	/* Read value */
+	info->value = readl(ADC_V1_DATX(info->regs)) &
+						ADC_DATX_MASK;
+	/* clear irq */
+	if (info->version == ADC_V2)
+		writel(1, ADC_V2_INT_ST(info->regs));
+	else
+		writel(1, ADC_V1_INTCLR(info->regs));
+
+	complete(&info->completion);
+
+	return IRQ_HANDLED;
+}
+
+static int exynos_adc_reg_access(struct iio_dev *indio_dev,
+			      unsigned reg, unsigned writeval,
+			      unsigned *readval)
+{
+	struct exynos_adc *info = iio_priv(indio_dev);
+
+	if (readval == NULL)
+		return -EINVAL;
+
+	*readval = readl(info->regs + reg);
+
+	return 0;
+}
+
+static const struct iio_info exynos_adc_iio_info = {
+	.read_raw = &exynos_read_raw,
+	.debugfs_reg_access = &exynos_adc_reg_access,
+	.driver_module = THIS_MODULE,
+};
+
+#define ADC_CHANNEL(_index, _id) {			\
+	.type = IIO_VOLTAGE,				\
+	.indexed = 1,					\
+	.channel = _index,				\
+	.address = _index,				\
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT,	\
+	.datasheet_name = _id,				\
+}
+
+static const struct iio_chan_spec exynos_adc_iio_channels[] = {
+	ADC_CHANNEL(0, "adc0"),
+	ADC_CHANNEL(1, "adc1"),
+	ADC_CHANNEL(2, "adc2"),
+	ADC_CHANNEL(3, "adc3"),
+	ADC_CHANNEL(4, "adc4"),
+	ADC_CHANNEL(5, "adc5"),
+	ADC_CHANNEL(6, "adc6"),
+	ADC_CHANNEL(7, "adc7"),
+	ADC_CHANNEL(8, "adc8"),
+	ADC_CHANNEL(9, "adc9"),
+};
+
+static int exynos_adc_remove_devices(struct device *dev, void *c)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	platform_device_unregister(pdev);
+
+	return 0;
+}
+
+static void exynos_adc_hw_init(struct exynos_adc *info)
+{
+	u32 con1, con2;
+
+	if (info->version == ADC_V2) {
+		con1 = ADC_V2_CON1_SOFT_RESET;
+		writel(con1, ADC_V2_CON1(info->regs));
+
+		con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
+			ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
+		writel(con2, ADC_V2_CON2(info->regs));
+
+		/* Enable interrupts */
+		writel(1, ADC_V2_INT_EN(info->regs));
+	} else {
+		/* set default prescaler values and Enable prescaler */
+		con1 =  ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
+
+		/* Enable 12-bit ADC resolution */
+		con1 |= ADC_V1_CON_RES;
+		writel(con1, ADC_V1_CON(info->regs));
+	}
+}
+
+static int exynos_adc_probe(struct platform_device *pdev)
+{
+	struct exynos_adc *info = NULL;
+	struct device_node *np = pdev->dev.of_node;
+	struct iio_dev *indio_dev = NULL;
+	struct resource	*mem;
+	int ret = -ENODEV;
+	int irq;
+
+	if (!np)
+		return ret;
+
+	indio_dev = iio_device_alloc(sizeof(struct exynos_adc));
+	if (!indio_dev) {
+		dev_err(&pdev->dev, "failed allocating iio device\n");
+		return -ENOMEM;
+	}
+
+	info = iio_priv(indio_dev);
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	info->regs = devm_request_and_ioremap(&pdev->dev, mem);
+	if (!info->regs) {
+		ret = -ENOMEM;
+		goto err_iio;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no irq resource?\n");
+		ret = irq;
+		goto err_iio;
+	}
+
+	info->irq = irq;
+
+	init_completion(&info->completion);
+
+	ret = request_irq(info->irq, exynos_adc_isr,
+					0, dev_name(&pdev->dev), info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
+							info->irq);
+		goto err_iio;
+	}
+
+	info->clk = devm_clk_get(&pdev->dev, "adc");
+	if (IS_ERR(info->clk)) {
+		dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
+							PTR_ERR(info->clk));
+		ret = PTR_ERR(info->clk);
+		goto err_irq;
+	}
+
+	info->vdd = devm_regulator_get(&pdev->dev, "vdd");
+	if (IS_ERR(info->vdd)) {
+		dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
+							PTR_ERR(info->vdd));
+		ret = PTR_ERR(info->vdd);
+		goto err_irq;
+	}
+
+	info->version = exynos_adc_get_version(pdev);
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->dev.of_node = pdev->dev.of_node;
+	indio_dev->info = &exynos_adc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = exynos_adc_iio_channels;
+
+	if (info->version == ADC_V1)
+		indio_dev->num_channels = MAX_ADC_V1_CHANNELS;
+	else
+		indio_dev->num_channels = MAX_ADC_V2_CHANNELS;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto err_irq;
+
+	ret = regulator_enable(info->vdd);
+	if (ret)
+		goto err_iio_dev;
+
+	clk_prepare_enable(info->clk);
+
+	exynos_adc_hw_init(info);
+
+	ret = of_platform_populate(np, exynos_adc_match, NULL, &pdev->dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed adding child nodes\n");
+		goto err_of_populate;
+	}
+
+	return 0;
+
+err_of_populate:
+	device_for_each_child(&pdev->dev, NULL,
+				exynos_adc_remove_devices);
+	regulator_disable(info->vdd);
+	clk_disable_unprepare(info->clk);
+err_iio_dev:
+	iio_device_unregister(indio_dev);
+err_irq:
+	free_irq(info->irq, info);
+err_iio:
+	iio_device_free(indio_dev);
+	return ret;
+}
+
+static int exynos_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct exynos_adc *info = iio_priv(indio_dev);
+
+	device_for_each_child(&pdev->dev, NULL,
+				exynos_adc_remove_devices);
+	regulator_disable(info->vdd);
+	clk_disable_unprepare(info->clk);
+	iio_device_unregister(indio_dev);
+	free_irq(info->irq, info);
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_adc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct exynos_adc *info = platform_get_drvdata(pdev);
+	u32 con;
+
+	if (info->version == ADC_V2) {
+		con = readl(ADC_V2_CON1(info->regs));
+		con &= ~ADC_CON_EN_START;
+		writel(con, ADC_V2_CON1(info->regs));
+	} else {
+		con = readl(ADC_V1_CON(info->regs));
+		con |= ADC_V1_CON_STANDBY;
+		writel(con, ADC_V1_CON(info->regs));
+	}
+
+	clk_disable_unprepare(info->clk);
+	regulator_disable(info->vdd);
+
+	return 0;
+}
+
+static int exynos_adc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct exynos_adc *info = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = regulator_enable(info->vdd);
+	if (ret)
+		return ret;
+
+	clk_prepare_enable(info->clk);
+
+	exynos_adc_hw_init(info);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(exynos_adc_pm_ops,
+			exynos_adc_suspend,
+			exynos_adc_resume);
+
+static struct platform_driver exynos_adc_driver = {
+	.probe		= exynos_adc_probe,
+	.remove		= exynos_adc_remove,
+	.driver		= {
+		.name	= "exynos-adc",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(exynos_adc_match),
+		.pm	= &exynos_adc_pm_ops,
+	},
+};
+
+module_platform_driver(exynos_adc_driver);
+
+MODULE_AUTHOR("Naveen Krishna Chatradhi <ch.naveen@samsung.com>");
+MODULE_DESCRIPTION("Samsung EXYNOS5 ADC driver");
+MODULE_LICENSE("GPL v2");