summaryrefslogtreecommitdiffstats
path: root/drivers/ata/sata_mv.c
diff options
context:
space:
mode:
authorMark Lord <liml@rtr.ca>2009-04-06 15:24:14 -0400
committerJeff Garzik <jgarzik@redhat.com>2009-04-06 20:13:48 -0400
commit65ad7fef10b50b6c06d6165fa847e2d3636b0a66 (patch)
tree500afce9205d59853e14901813ae4f6689210019 /drivers/ata/sata_mv.c
parentc361acbc59c434315f8649ab06e5b7d5b297d1b7 (diff)
downloadblackbird-obmc-linux-65ad7fef10b50b6c06d6165fa847e2d3636b0a66.tar.gz
blackbird-obmc-linux-65ad7fef10b50b6c06d6165fa847e2d3636b0a66.zip
sata_mv: workaround errata PCI#7
Workaround for 60x1-B2 errata PCI#7. Write-combining may be unreliable when chip operates in PCI-X mode, so disable write-combining when in PCI-X mode. Also, update the errata comments at the top of sata_mv, and include a note about errata PCI#11. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/ata/sata_mv.c')
-rw-r--r--drivers/ata/sata_mv.c27
1 files changed, 23 insertions, 4 deletions
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index a49643d16f33..b0c929d36234 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -28,10 +28,6 @@
/*
* sata_mv TODO list:
*
- * --> More errata workarounds for PCI-X.
- *
- * --> Complete a full errata audit for all chipsets to identify others.
- *
* --> Develop a low-power-consumption strategy, and implement it.
*
* --> Add sysfs attributes for per-chip / per-HC IRQ coalescing thresholds.
@@ -44,6 +40,15 @@
* connect two SATA ports.
*/
+/*
+ * 80x1-B2 errata PCI#11:
+ *
+ * Users of the 6041/6081 Rev.B2 chips (current is C0)
+ * should be careful to insert those cards only onto PCI-X bus #0,
+ * and only in device slots 0..7, not higher. The chips may not
+ * work correctly otherwise (note: this is a pretty rare condition).
+ */
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
@@ -181,6 +186,7 @@ enum {
/* PCI interface registers */
PCI_COMMAND_OFS = 0xc00,
+ PCI_COMMAND_MWRCOM = (1 << 4), /* PCI Master Write Combining */
PCI_COMMAND_MRDTRIG = (1 << 7), /* PCI Master Read Trigger */
PCI_MAIN_CMD_STS_OFS = 0xd30,
@@ -3527,6 +3533,18 @@ static int mv_pci_cut_through_okay(struct ata_host *host)
return 1; /* okay */
}
+static void mv_60x1b2_errata_pci7(struct ata_host *host)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ void __iomem *mmio = hpriv->base;
+
+ /* workaround for 60x1-B2 errata PCI#7 */
+ if (mv_in_pcix_mode(host)) {
+ u32 reg = readl(mmio + PCI_COMMAND_OFS);
+ writelfl(reg & ~PCI_COMMAND_MWRCOM, mmio + PCI_COMMAND_OFS);
+ }
+}
+
static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
{
struct pci_dev *pdev = to_pci_dev(host->dev);
@@ -3580,6 +3598,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
switch (pdev->revision) {
case 0x7:
+ mv_60x1b2_errata_pci7(host);
hp_flags |= MV_HP_ERRATA_60X1B2;
break;
case 0x9:
OpenPOWER on IntegriCloud