summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-10-22 08:47:45 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-10-22 08:47:45 -0700
commit211baf4ffc6e78a2299bb4215264ada313048ec5 (patch)
tree8a239012f6eafc0e5e3390877e04807131872a58 /arch/x86/kernel
parentc19483cc5e56ac5e22dd19cf25ba210ab1537773 (diff)
parent995bd3bb5c78f3ff71339803c0b8337ed36d64fb (diff)
downloadblackbird-obmc-linux-211baf4ffc6e78a2299bb4215264ada313048ec5.tar.gz
blackbird-obmc-linux-211baf4ffc6e78a2299bb4215264ada313048ec5.zip
Merge branch 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Hpet: Avoid the comparator readback penalty
Diffstat (limited to 'arch/x86/kernel')
-rw-r--r--arch/x86/kernel/hpet.c51
1 files changed, 21 insertions, 30 deletions
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index efaf906daf93..aff0b3c27509 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -380,44 +380,35 @@ static int hpet_next_event(unsigned long delta,
struct clock_event_device *evt, int timer)
{
u32 cnt;
+ s32 res;
cnt = hpet_readl(HPET_COUNTER);
cnt += (u32) delta;
hpet_writel(cnt, HPET_Tn_CMP(timer));
/*
- * We need to read back the CMP register on certain HPET
- * implementations (ATI chipsets) which seem to delay the
- * transfer of the compare register into the internal compare
- * logic. With small deltas this might actually be too late as
- * the counter could already be higher than the compare value
- * at that point and we would wait for the next hpet interrupt
- * forever. We found out that reading the CMP register back
- * forces the transfer so we can rely on the comparison with
- * the counter register below. If the read back from the
- * compare register does not match the value we programmed
- * then we might have a real hardware problem. We can not do
- * much about it here, but at least alert the user/admin with
- * a prominent warning.
- *
- * An erratum on some chipsets (ICH9,..), results in
- * comparator read immediately following a write returning old
- * value. Workaround for this is to read this value second
- * time, when first read returns old value.
- *
- * In fact the write to the comparator register is delayed up
- * to two HPET cycles so the workaround we tried to restrict
- * the readback to those known to be borked ATI chipsets
- * failed miserably. So we give up on optimizations forever
- * and penalize all HPET incarnations unconditionally.
+ * HPETs are a complete disaster. The compare register is
+ * based on a equal comparison and neither provides a less
+ * than or equal functionality (which would require to take
+ * the wraparound into account) nor a simple count down event
+ * mode. Further the write to the comparator register is
+ * delayed internally up to two HPET clock cycles in certain
+ * chipsets (ATI, ICH9,10). We worked around that by reading
+ * back the compare register, but that required another
+ * workaround for ICH9,10 chips where the first readout after
+ * write can return the old stale value. We already have a
+ * minimum delta of 5us enforced, but a NMI or SMI hitting
+ * between the counter readout and the comparator write can
+ * move us behind that point easily. Now instead of reading
+ * the compare register back several times, we make the ETIME
+ * decision based on the following: Return ETIME if the
+ * counter value after the write is less than 8 HPET cycles
+ * away from the event or if the counter is already ahead of
+ * the event.
*/
- if (unlikely((u32)hpet_readl(HPET_Tn_CMP(timer)) != cnt)) {
- if (hpet_readl(HPET_Tn_CMP(timer)) != cnt)
- printk_once(KERN_WARNING
- "hpet: compare register read back failed.\n");
- }
+ res = (s32)(cnt - hpet_readl(HPET_COUNTER));
- return (s32)(hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
+ return res < 8 ? -ETIME : 0;
}
static void hpet_legacy_set_mode(enum clock_event_mode mode,
OpenPOWER on IntegriCloud