summaryrefslogtreecommitdiffstats
path: root/arch/sh
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-04-13 12:27:11 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-04-13 12:27:11 -0700
commit1bad9ce155a7c010a9a5f3261ad12a6a8eccfb2c (patch)
tree68a3c700c16c6fb4fe729f7f5f89b59855a995a8 /arch/sh
parente4e57f20fa12ce044fa2b9fec204098799485539 (diff)
parentbf9c7e3d7924f72225f8f9c28438b4a711192ad3 (diff)
downloadblackbird-obmc-linux-1bad9ce155a7c010a9a5f3261ad12a6a8eccfb2c.tar.gz
blackbird-obmc-linux-1bad9ce155a7c010a9a5f3261ad12a6a8eccfb2c.zip
Merge tag 'sh-for-4.17' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker: "Fixes for bugs in futex, device tree, and userspace breakpoint traps, and for PCI issues on SH7786" * tag 'sh-for-4.17' of git://git.libc.org/linux-sh: arch/sh: pcie-sh7786: handle non-zero DMA offset arch/sh: pcie-sh7786: adjust the memory mapping arch/sh: pcie-sh7786: adjust PCI MEM and IO regions arch/sh: pcie-sh7786: exclude unusable PCI MEM areas arch/sh: pcie-sh7786: mark unavailable PCI resource as disabled arch/sh: pci: don't use disabled resources arch/sh: make the DMA mapping operations observe dev->dma_pfn_offset arch/sh: add sh7786_mm_sel() function sh: fix debug trap failure to process signals before return to user sh: fix memory corruption of unflattened device tree sh: fix futex FUTEX_OP_SET op on userspace addresses
Diffstat (limited to 'arch/sh')
-rw-r--r--arch/sh/boards/of-generic.c6
-rw-r--r--arch/sh/drivers/pci/pci.c5
-rw-r--r--arch/sh/drivers/pci/pcie-sh7786.c78
-rw-r--r--arch/sh/include/asm/futex.h5
-rw-r--r--arch/sh/include/cpu-sh4/cpu/sh7786.h7
-rw-r--r--arch/sh/kernel/dma-nommu.c7
-rw-r--r--arch/sh/kernel/entry-common.S2
-rw-r--r--arch/sh/kernel/setup.c8
-rw-r--r--arch/sh/mm/consistent.c4
9 files changed, 84 insertions, 38 deletions
diff --git a/arch/sh/boards/of-generic.c b/arch/sh/boards/of-generic.c
index 4feb7c86f4ac..46b2481eec90 100644
--- a/arch/sh/boards/of-generic.c
+++ b/arch/sh/boards/of-generic.c
@@ -126,12 +126,6 @@ static void __init sh_of_setup(char **cmdline_p)
{
struct device_node *root;
-#ifdef CONFIG_USE_BUILTIN_DTB
- unflatten_and_copy_device_tree();
-#else
- unflatten_device_tree();
-#endif
-
board_time_init = sh_of_time_init;
sh_mv.mv_name = "Unknown SH model";
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 5976a2c8a3e3..e5b7437ab4af 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -49,6 +49,8 @@ static void pcibios_scanbus(struct pci_channel *hose)
for (i = 0; i < hose->nr_resources; i++) {
res = hose->resources + i;
offset = 0;
+ if (res->flags & IORESOURCE_DISABLED)
+ continue;
if (res->flags & IORESOURCE_IO)
offset = hose->io_offset;
else if (res->flags & IORESOURCE_MEM)
@@ -102,6 +104,9 @@ int register_pci_controller(struct pci_channel *hose)
for (i = 0; i < hose->nr_resources; i++) {
struct resource *res = hose->resources + i;
+ if (res->flags & IORESOURCE_DISABLED)
+ continue;
+
if (res->flags & IORESOURCE_IO) {
if (request_resource(&ioport_resource, res) < 0)
goto out;
diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c
index 0167a7352719..382e7ecf4c82 100644
--- a/arch/sh/drivers/pci/pcie-sh7786.c
+++ b/arch/sh/drivers/pci/pcie-sh7786.c
@@ -19,6 +19,7 @@
#include <linux/clk.h>
#include <linux/sh_clk.h>
#include <linux/sh_intc.h>
+#include <cpu/sh7786.h>
#include "pcie-sh7786.h"
#include <asm/sizes.h>
@@ -32,6 +33,7 @@ struct sh7786_pcie_port {
static struct sh7786_pcie_port *sh7786_pcie_ports;
static unsigned int nr_ports;
+static unsigned long dma_pfn_offset;
static struct sh7786_pcie_hwops {
int (*core_init)(void);
@@ -40,73 +42,73 @@ static struct sh7786_pcie_hwops {
static struct resource sh7786_pci0_resources[] = {
{
- .name = "PCIe0 IO",
+ .name = "PCIe0 MEM 0",
.start = 0xfd000000,
.end = 0xfd000000 + SZ_8M - 1,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_MEM,
}, {
- .name = "PCIe0 MEM 0",
+ .name = "PCIe0 MEM 1",
.start = 0xc0000000,
.end = 0xc0000000 + SZ_512M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
- .name = "PCIe0 MEM 1",
+ .name = "PCIe0 MEM 2",
.start = 0x10000000,
.end = 0x10000000 + SZ_64M - 1,
.flags = IORESOURCE_MEM,
}, {
- .name = "PCIe0 MEM 2",
+ .name = "PCIe0 IO",
.start = 0xfe100000,
.end = 0xfe100000 + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
+ .flags = IORESOURCE_IO,
},
};
static struct resource sh7786_pci1_resources[] = {
{
- .name = "PCIe1 IO",
+ .name = "PCIe1 MEM 0",
.start = 0xfd800000,
.end = 0xfd800000 + SZ_8M - 1,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_MEM,
}, {
- .name = "PCIe1 MEM 0",
+ .name = "PCIe1 MEM 1",
.start = 0xa0000000,
.end = 0xa0000000 + SZ_512M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
- .name = "PCIe1 MEM 1",
+ .name = "PCIe1 MEM 2",
.start = 0x30000000,
.end = 0x30000000 + SZ_256M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
- .name = "PCIe1 MEM 2",
+ .name = "PCIe1 IO",
.start = 0xfe300000,
.end = 0xfe300000 + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
+ .flags = IORESOURCE_IO,
},
};
static struct resource sh7786_pci2_resources[] = {
{
- .name = "PCIe2 IO",
+ .name = "PCIe2 MEM 0",
.start = 0xfc800000,
.end = 0xfc800000 + SZ_4M - 1,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_MEM,
}, {
- .name = "PCIe2 MEM 0",
+ .name = "PCIe2 MEM 1",
.start = 0x80000000,
.end = 0x80000000 + SZ_512M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
- .name = "PCIe2 MEM 1",
+ .name = "PCIe2 MEM 2",
.start = 0x20000000,
.end = 0x20000000 + SZ_256M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
- .name = "PCIe2 MEM 2",
+ .name = "PCIe2 IO",
.start = 0xfcd00000,
.end = 0xfcd00000 + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
+ .flags = IORESOURCE_IO,
},
};
@@ -301,7 +303,7 @@ static int __init pcie_init(struct sh7786_pcie_port *port)
{
struct pci_channel *chan = port->hose;
unsigned int data;
- phys_addr_t memphys;
+ phys_addr_t memstart, memend;
size_t memsize;
int ret, i, win;
@@ -357,15 +359,26 @@ static int __init pcie_init(struct sh7786_pcie_port *port)
data |= (0xff << 16);
pci_write_reg(chan, data, SH4A_PCIEMACCTLR);
- memphys = __pa(memory_start);
- memsize = roundup_pow_of_two(memory_end - memory_start);
+ memstart = __pa(memory_start);
+ memend = __pa(memory_end);
+ memsize = roundup_pow_of_two(memend - memstart);
+
+ /*
+ * The start address must be aligned on its size. So we round
+ * it down, and then recalculate the size so that it covers
+ * the entire memory.
+ */
+ memstart = ALIGN_DOWN(memstart, memsize);
+ memsize = roundup_pow_of_two(memend - memstart);
+
+ dma_pfn_offset = memstart >> PAGE_SHIFT;
/*
* If there's more than 512MB of memory, we need to roll over to
* LAR1/LAMR1.
*/
if (memsize > SZ_512M) {
- pci_write_reg(chan, memphys + SZ_512M, SH4A_PCIELAR1);
+ pci_write_reg(chan, memstart + SZ_512M, SH4A_PCIELAR1);
pci_write_reg(chan, ((memsize - SZ_512M) - SZ_256) | 1,
SH4A_PCIELAMR1);
memsize = SZ_512M;
@@ -381,7 +394,7 @@ static int __init pcie_init(struct sh7786_pcie_port *port)
* LAR0/LAMR0 covers up to the first 512MB, which is enough to
* cover all of lowmem on most platforms.
*/
- pci_write_reg(chan, memphys, SH4A_PCIELAR0);
+ pci_write_reg(chan, memstart, SH4A_PCIELAR0);
pci_write_reg(chan, (memsize - SZ_256) | 1, SH4A_PCIELAMR0);
/* Finish initialization */
@@ -438,6 +451,9 @@ static int __init pcie_init(struct sh7786_pcie_port *port)
* mode, so just skip them entirely.
*/
if ((res->flags & IORESOURCE_MEM_32BIT) && __in_29bit_mode())
+ res->flags |= IORESOURCE_DISABLED;
+
+ if (res->flags & IORESOURCE_DISABLED)
continue;
pci_write_reg(chan, 0x00000000, SH4A_PCIEPTCTLR(win));
@@ -472,6 +488,11 @@ int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
return evt2irq(0xae0);
}
+void pcibios_bus_add_device(struct pci_dev *pdev)
+{
+ pdev->dev.dma_pfn_offset = dma_pfn_offset;
+}
+
static int __init sh7786_pcie_core_init(void)
{
/* Return the number of ports */
@@ -527,6 +548,7 @@ static struct sh7786_pcie_hwops sh7786_65nm_pcie_hwops __initdata = {
static int __init sh7786_pcie_init(void)
{
struct clk *platclk;
+ u32 mm_sel;
int i;
printk(KERN_NOTICE "PCI: Starting initialization.\n");
@@ -560,6 +582,16 @@ static int __init sh7786_pcie_init(void)
clk_enable(platclk);
+ mm_sel = sh7786_mm_sel();
+
+ /*
+ * Depending on the MMSELR register value, the PCIe0 MEM 1
+ * area may not be available. See Table 13.11 of the SH7786
+ * datasheet.
+ */
+ if (mm_sel != 1 && mm_sel != 2 && mm_sel != 5 && mm_sel != 6)
+ sh7786_pci0_resources[2].flags |= IORESOURCE_DISABLED;
+
printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports);
for (i = 0; i < nr_ports; i++) {
diff --git a/arch/sh/include/asm/futex.h b/arch/sh/include/asm/futex.h
index 15bf07bfa96b..6d192f4908a7 100644
--- a/arch/sh/include/asm/futex.h
+++ b/arch/sh/include/asm/futex.h
@@ -37,10 +37,7 @@ static inline int arch_futex_atomic_op_inuser(int op, u32 oparg, int *oval,
pagefault_disable();
do {
- if (op == FUTEX_OP_SET)
- ret = oldval = 0;
- else
- ret = get_user(oldval, uaddr);
+ ret = get_user(oldval, uaddr);
if (ret) break;
diff --git a/arch/sh/include/cpu-sh4/cpu/sh7786.h b/arch/sh/include/cpu-sh4/cpu/sh7786.h
index 0df09e638f09..96b8cb1f754a 100644
--- a/arch/sh/include/cpu-sh4/cpu/sh7786.h
+++ b/arch/sh/include/cpu-sh4/cpu/sh7786.h
@@ -14,6 +14,8 @@
#ifndef __CPU_SH7786_H__
#define __CPU_SH7786_H__
+#include <linux/io.h>
+
enum {
/* PA */
GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
@@ -131,4 +133,9 @@ enum {
GPIO_FN_IRL7, GPIO_FN_IRL6, GPIO_FN_IRL5, GPIO_FN_IRL4,
};
+static inline u32 sh7786_mm_sel(void)
+{
+ return __raw_readl(0xFC400020) & 0x7;
+}
+
#endif /* __CPU_SH7786_H__ */
diff --git a/arch/sh/kernel/dma-nommu.c b/arch/sh/kernel/dma-nommu.c
index 62b485107eae..178457d7620c 100644
--- a/arch/sh/kernel/dma-nommu.c
+++ b/arch/sh/kernel/dma-nommu.c
@@ -16,7 +16,8 @@ static dma_addr_t nommu_map_page(struct device *dev, struct page *page,
enum dma_data_direction dir,
unsigned long attrs)
{
- dma_addr_t addr = page_to_phys(page) + offset;
+ dma_addr_t addr = page_to_phys(page) + offset
+ - PFN_PHYS(dev->dma_pfn_offset);
WARN_ON(size == 0);
@@ -36,12 +37,14 @@ static int nommu_map_sg(struct device *dev, struct scatterlist *sg,
WARN_ON(nents == 0 || sg[0].length == 0);
for_each_sg(sg, s, nents, i) {
+ dma_addr_t offset = PFN_PHYS(dev->dma_pfn_offset);
+
BUG_ON(!sg_page(s));
if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
sh_sync_dma_for_device(sg_virt(s), s->length, dir);
- s->dma_address = sg_phys(s);
+ s->dma_address = sg_phys(s) - offset;
s->dma_length = s->length;
}
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index c001f782c5f1..28cc61216b64 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -255,7 +255,7 @@ debug_trap:
mov.l @r8, r8
jsr @r8
nop
- bra __restore_all
+ bra ret_from_exception
nop
CFI_ENDPROC
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index b95c411d0333..d34e998b809f 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -330,6 +330,14 @@ void __init setup_arch(char **cmdline_p)
/* Let earlyprintk output early console messages */
early_platform_driver_probe("earlyprintk", 1, 1);
+#ifdef CONFIG_OF_FLATTREE
+#ifdef CONFIG_USE_BUILTIN_DTB
+ unflatten_and_copy_device_tree();
+#else
+ unflatten_device_tree();
+#endif
+#endif
+
paging_init();
#ifdef CONFIG_DUMMY_CONSOLE
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index 6ea3aab508f2..8ce98691d822 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -59,7 +59,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,
split_page(pfn_to_page(virt_to_phys(ret) >> PAGE_SHIFT), order);
- *dma_handle = virt_to_phys(ret);
+ *dma_handle = virt_to_phys(ret) - PFN_PHYS(dev->dma_pfn_offset);
return ret_nocache;
}
@@ -69,7 +69,7 @@ void dma_generic_free_coherent(struct device *dev, size_t size,
unsigned long attrs)
{
int order = get_order(size);
- unsigned long pfn = dma_handle >> PAGE_SHIFT;
+ unsigned long pfn = (dma_handle >> PAGE_SHIFT) + dev->dma_pfn_offset;
int k;
for (k = 0; k < (1 << order); k++)
OpenPOWER on IntegriCloud