sh: Move over the SH-5 entry.S.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 0 insertions, 2102 deletions

diff --git a/arch/sh64/kernel/entry.S b/arch/sh64/kernel/entry.S
deleted file mode 100644
index 7013fcb6665c..000000000000
--- a/arch/sh64/kernel/entry.S
+++ /dev/null
@@ -1,2102 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/sh64/kernel/entry.S
- *
- * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2004, 2005  Paul Mundt
- * Copyright (C) 2003, 2004 Richard Curnow
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sys.h>
-
-#include <asm/processor.h>
-#include <asm/registers.h>
-#include <asm/unistd.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-/*
- * SR fields.
- */
-#define SR_ASID_MASK	0x00ff0000
-#define SR_FD_MASK	0x00008000
-#define SR_SS		0x08000000
-#define SR_BL		0x10000000
-#define SR_MD		0x40000000
-
-/*
- * Event code.
- */
-#define	EVENT_INTERRUPT		0
-#define	EVENT_FAULT_TLB		1
-#define	EVENT_FAULT_NOT_TLB	2
-#define	EVENT_DEBUG		3
-
-/* EXPEVT values */
-#define	RESET_CAUSE		0x20
-#define DEBUGSS_CAUSE		0x980
-
-/*
- * Frame layout. Quad index.
- */
-#define	FRAME_T(x)	FRAME_TBASE+(x*8)
-#define	FRAME_R(x)	FRAME_RBASE+(x*8)
-#define	FRAME_S(x)	FRAME_SBASE+(x*8)
-#define FSPC		0
-#define FSSR		1
-#define FSYSCALL_ID	2
-
-/* Arrange the save frame to be a multiple of 32 bytes long */
-#define FRAME_SBASE	0
-#define FRAME_RBASE	(FRAME_SBASE+(3*8))	/* SYSCALL_ID - SSR - SPC */
-#define FRAME_TBASE	(FRAME_RBASE+(63*8))	/* r0 - r62 */
-#define FRAME_PBASE	(FRAME_TBASE+(8*8))	/* tr0 -tr7 */
-#define	FRAME_SIZE	(FRAME_PBASE+(2*8))	/* pad0-pad1 */
-
-#define FP_FRAME_SIZE	FP_FRAME_BASE+(33*8)	/* dr0 - dr31 + fpscr */
-#define FP_FRAME_BASE	0
-
-#define	SAVED_R2	0*8
-#define	SAVED_R3	1*8
-#define	SAVED_R4	2*8
-#define	SAVED_R5	3*8
-#define	SAVED_R18	4*8
-#define	SAVED_R6	5*8
-#define	SAVED_TR0	6*8
-
-/* These are the registers saved in the TLB path that aren't saved in the first
-   level of the normal one. */
-#define	TLB_SAVED_R25	7*8
-#define	TLB_SAVED_TR1	8*8
-#define	TLB_SAVED_TR2	9*8
-#define	TLB_SAVED_TR3	10*8
-#define	TLB_SAVED_TR4	11*8
-/* Save R0/R1 : PT-migrating compiler currently dishounours -ffixed-r0 and -ffixed-r1 causing
-   breakage otherwise. */
-#define	TLB_SAVED_R0	12*8
-#define	TLB_SAVED_R1	13*8
-
-#define CLI()				\
-	getcon	SR, r6;			\
-	ori	r6, 0xf0, r6;		\
-	putcon	r6, SR;
-
-#define STI()				\
-	getcon	SR, r6;			\
-	andi	r6, ~0xf0, r6;		\
-	putcon	r6, SR;
-
-#ifdef CONFIG_PREEMPT
-#  define preempt_stop()	CLI()
-#else
-#  define preempt_stop()
-#  define resume_kernel		restore_all
-#endif
-
-	.section	.data, "aw"
-
-#define FAST_TLBMISS_STACK_CACHELINES 4
-#define FAST_TLBMISS_STACK_QUADWORDS (4*FAST_TLBMISS_STACK_CACHELINES)
-
-/* Register back-up area for all exceptions */
-	.balign	32
-	/* Allow for 16 quadwords to be pushed by fast tlbmiss handling
-	 * register saves etc. */
-	.fill FAST_TLBMISS_STACK_QUADWORDS, 8, 0x0
-/* This is 32 byte aligned by construction */
-/* Register back-up area for all exceptions */
-reg_save_area:
-	.quad	0
-	.quad	0
-	.quad	0
-	.quad	0
-
-	.quad	0
-	.quad	0
-	.quad	0
-	.quad	0
-
-	.quad	0
-	.quad	0
-	.quad	0
-	.quad	0
-
-	.quad	0
-	.quad   0
-
-/* Save area for RESVEC exceptions. We cannot use reg_save_area because of
- * reentrancy. Note this area may be accessed via physical address.
- * Align so this fits a whole single cache line, for ease of purging.
- */
-	.balign 32,0,32
-resvec_save_area:
-	.quad	0
-	.quad	0
-	.quad	0
-	.quad	0
-	.quad	0
-	.balign 32,0,32
-
-/* Jump table of 3rd level handlers  */
-trap_jtable:
-	.long	do_exception_error		/* 0x000 */
-	.long	do_exception_error		/* 0x020 */
-	.long	tlb_miss_load				/* 0x040 */
-	.long	tlb_miss_store				/* 0x060 */
-	! ARTIFICIAL pseudo-EXPEVT setting
-	.long	do_debug_interrupt		/* 0x080 */
-	.long	tlb_miss_load				/* 0x0A0 */
-	.long	tlb_miss_store				/* 0x0C0 */
-	.long	do_address_error_load	/* 0x0E0 */
-	.long	do_address_error_store	/* 0x100 */
-#ifdef CONFIG_SH_FPU
-	.long	do_fpu_error		/* 0x120 */
-#else
-	.long	do_exception_error		/* 0x120 */
-#endif
-	.long	do_exception_error		/* 0x140 */
-	.long	system_call				/* 0x160 */
-	.long	do_reserved_inst		/* 0x180 */
-	.long	do_illegal_slot_inst	/* 0x1A0 */
-	.long	do_NMI			/* 0x1C0 */
-	.long	do_exception_error		/* 0x1E0 */
-	.rept 15
-		.long do_IRQ		/* 0x200 - 0x3C0 */
-	.endr
-	.long	do_exception_error		/* 0x3E0 */
-	.rept 32
-		.long do_IRQ		/* 0x400 - 0x7E0 */
-	.endr
-	.long	fpu_error_or_IRQA			/* 0x800 */
-	.long	fpu_error_or_IRQB			/* 0x820 */
-	.long	do_IRQ			/* 0x840 */
-	.long	do_IRQ			/* 0x860 */
-	.rept 6
-		.long do_exception_error	/* 0x880 - 0x920 */
-	.endr
-	.long	do_software_break_point	/* 0x940 */
-	.long	do_exception_error		/* 0x960 */
-	.long	do_single_step		/* 0x980 */
-
-	.rept 3
-		.long do_exception_error	/* 0x9A0 - 0x9E0 */
-	.endr
-	.long	do_IRQ			/* 0xA00 */
-	.long	do_IRQ			/* 0xA20 */
-	.long	itlb_miss_or_IRQ			/* 0xA40 */
-	.long	do_IRQ			/* 0xA60 */
-	.long	do_IRQ			/* 0xA80 */
-	.long	itlb_miss_or_IRQ			/* 0xAA0 */
-	.long	do_exception_error		/* 0xAC0 */
-	.long	do_address_error_exec	/* 0xAE0 */
-	.rept 8
-		.long do_exception_error	/* 0xB00 - 0xBE0 */
-	.endr
-	.rept 18
-		.long do_IRQ		/* 0xC00 - 0xE20 */
-	.endr
-
-	.section	.text64, "ax"
-
-/*
- * --- Exception/Interrupt/Event Handling Section
- */
-
-/*
- * VBR and RESVEC blocks.
- *
- * First level handler for VBR-based exceptions.
- *
- * To avoid waste of space, align to the maximum text block size.
- * This is assumed to be at most 128 bytes or 32 instructions.
- * DO NOT EXCEED 32 instructions on the first level handlers !
- *
- * Also note that RESVEC is contained within the VBR block
- * where the room left (1KB - TEXT_SIZE) allows placing
- * the RESVEC block (at most 512B + TEXT_SIZE).
- *
- * So first (and only) level handler for RESVEC-based exceptions.
- *
- * Where the fault/interrupt is handled (not_a_tlb_miss, tlb_miss
- * and interrupt) we are a lot tight with register space until
- * saving onto the stack frame, which is done in handle_exception().
- *
- */
-
-#define	TEXT_SIZE 	128
-#define	BLOCK_SIZE 	1664 		/* Dynamic check, 13*128 */
-
-	.balign TEXT_SIZE
-LVBR_block:
-	.space	256, 0			/* Power-on class handler, */
-					/* not required here       */
-not_a_tlb_miss:
-	synco	/* TAKum03020 (but probably a good idea anyway.) */
-	/* Save original stack pointer into KCR1 */
-	putcon	SP, KCR1
-
-	/* Save other original registers into reg_save_area */
-        movi  reg_save_area, SP
-	st.q	SP, SAVED_R2, r2
-	st.q	SP, SAVED_R3, r3
-	st.q	SP, SAVED_R4, r4
-	st.q	SP, SAVED_R5, r5
-	st.q	SP, SAVED_R6, r6
-	st.q	SP, SAVED_R18, r18
-	gettr	tr0, r3
-	st.q	SP, SAVED_TR0, r3
-
-	/* Set args for Non-debug, Not a TLB miss class handler */
-	getcon	EXPEVT, r2
-	movi	ret_from_exception, r3
-	ori	r3, 1, r3
-	movi	EVENT_FAULT_NOT_TLB, r4
-	or	SP, ZERO, r5
-	getcon	KCR1, SP
-	pta	handle_exception, tr0
-	blink	tr0, ZERO
-
-	.balign 256
-	! VBR+0x200
-	nop
-	.balign 256
-	! VBR+0x300
-	nop
-	.balign 256
-	/*
-	 * Instead of the natural .balign 1024 place RESVEC here
-	 * respecting the final 1KB alignment.
-	 */
-	.balign TEXT_SIZE
-	/*
-	 * Instead of '.space 1024-TEXT_SIZE' place the RESVEC
-	 * block making sure the final alignment is correct.
-	 */
-tlb_miss:
-	synco	/* TAKum03020 (but probably a good idea anyway.) */
-	putcon	SP, KCR1
-	movi	reg_save_area, SP
-	/* SP is guaranteed 32-byte aligned. */
-	st.q	SP, TLB_SAVED_R0 , r0
-	st.q	SP, TLB_SAVED_R1 , r1
-	st.q	SP, SAVED_R2 , r2
-	st.q	SP, SAVED_R3 , r3
-	st.q	SP, SAVED_R4 , r4
-	st.q	SP, SAVED_R5 , r5
-	st.q	SP, SAVED_R6 , r6
-	st.q	SP, SAVED_R18, r18
-
-	/* Save R25 for safety; as/ld may want to use it to achieve the call to
-	 * the code in mm/tlbmiss.c */
-	st.q	SP, TLB_SAVED_R25, r25
-	gettr	tr0, r2
-	gettr	tr1, r3
-	gettr	tr2, r4
-	gettr	tr3, r5
-	gettr	tr4, r18
-	st.q	SP, SAVED_TR0 , r2
-	st.q	SP, TLB_SAVED_TR1 , r3
-	st.q	SP, TLB_SAVED_TR2 , r4
-	st.q	SP, TLB_SAVED_TR3 , r5
-	st.q	SP, TLB_SAVED_TR4 , r18
-
-	pt	do_fast_page_fault, tr0
-	getcon	SSR, r2
-	getcon	EXPEVT, r3
-	getcon	TEA, r4
-	shlri	r2, 30, r2
-	andi	r2, 1, r2	/* r2 = SSR.MD */
-	blink 	tr0, LINK
-
-	pt	fixup_to_invoke_general_handler, tr1
-
-	/* If the fast path handler fixed the fault, just drop through quickly
-	   to the restore code right away to return to the excepting context.
-	   */
-	beqi/u	r2, 0, tr1
-
-fast_tlb_miss_restore:
-	ld.q	SP, SAVED_TR0, r2
-	ld.q	SP, TLB_SAVED_TR1, r3
-	ld.q	SP, TLB_SAVED_TR2, r4
-
-	ld.q	SP, TLB_SAVED_TR3, r5
-	ld.q	SP, TLB_SAVED_TR4, r18
-
-	ptabs	r2, tr0
-	ptabs	r3, tr1
-	ptabs	r4, tr2
-	ptabs	r5, tr3
-	ptabs	r18, tr4
-
-	ld.q	SP, TLB_SAVED_R0, r0
-	ld.q	SP, TLB_SAVED_R1, r1
-	ld.q	SP, SAVED_R2, r2
-	ld.q	SP, SAVED_R3, r3
-	ld.q	SP, SAVED_R4, r4
-	ld.q	SP, SAVED_R5, r5
-	ld.q	SP, SAVED_R6, r6
-	ld.q	SP, SAVED_R18, r18
-	ld.q	SP, TLB_SAVED_R25, r25
-
-	getcon	KCR1, SP
-	rte
-	nop /* for safety, in case the code is run on sh5-101 cut1.x */
-
-fixup_to_invoke_general_handler:
-
-	/* OK, new method.  Restore stuff that's not expected to get saved into
-	   the 'first-level' reg save area, then just fall through to setting
-	   up the registers and calling the second-level handler. */
-
-	/* 2nd level expects r2,3,4,5,6,18,tr0 to be saved.  So we must restore
-	   r25,tr1-4 and save r6 to get into the right state.  */
-
-	ld.q	SP, TLB_SAVED_TR1, r3
-	ld.q	SP, TLB_SAVED_TR2, r4
-	ld.q	SP, TLB_SAVED_TR3, r5
-	ld.q	SP, TLB_SAVED_TR4, r18
-	ld.q	SP, TLB_SAVED_R25, r25
-
-	ld.q	SP, TLB_SAVED_R0, r0
-	ld.q	SP, TLB_SAVED_R1, r1
-
-	ptabs/u	r3, tr1
-	ptabs/u	r4, tr2
-	ptabs/u	r5, tr3
-	ptabs/u	r18, tr4
-
-	/* Set args for Non-debug, TLB miss class handler */
-	getcon	EXPEVT, r2
-	movi	ret_from_exception, r3
-	ori	r3, 1, r3
-	movi	EVENT_FAULT_TLB, r4
-	or	SP, ZERO, r5
-	getcon	KCR1, SP
-	pta	handle_exception, tr0
-	blink	tr0, ZERO
-
-/* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE
-   DOES END UP AT VBR+0x600 */
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	.balign 256
-	/* VBR + 0x600 */
-
-interrupt:
-	synco	/* TAKum03020 (but probably a good idea anyway.) */
-	/* Save original stack pointer into KCR1 */
-	putcon	SP, KCR1
-
-	/* Save other original registers into reg_save_area */
-        movi  reg_save_area, SP
-	st.q	SP, SAVED_R2, r2
-	st.q	SP, SAVED_R3, r3
-	st.q	SP, SAVED_R4, r4
-	st.q	SP, SAVED_R5, r5
-	st.q	SP, SAVED_R6, r6
-	st.q	SP, SAVED_R18, r18
-	gettr	tr0, r3
-	st.q	SP, SAVED_TR0, r3
-
-	/* Set args for interrupt class handler */
-	getcon	INTEVT, r2
-	movi	ret_from_irq, r3
-	ori	r3, 1, r3
-	movi	EVENT_INTERRUPT, r4
-	or	SP, ZERO, r5
-	getcon	KCR1, SP
-	pta	handle_exception, tr0
-	blink	tr0, ZERO
-	.balign	TEXT_SIZE		/* let's waste the bare minimum */
-
-LVBR_block_end:				/* Marker. Used for total checking */
-
-	.balign 256
-LRESVEC_block:
-	/* Panic handler. Called with MMU off. Possible causes/actions:
-	 * - Reset:		Jump to program start.
-	 * - Single Step:	Turn off Single Step & return.
-	 * - Others:		Call panic handler, passing PC as arg.
-	 *			(this may need to be extended...)
-	 */
-reset_or_panic:
-	synco	/* TAKum03020 (but probably a good idea anyway.) */
-	putcon	SP, DCR
-	/* First save r0-1 and tr0, as we need to use these */
-	movi	resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP
-	st.q	SP, 0, r0
-	st.q	SP, 8, r1
-	gettr	tr0, r0
-	st.q	SP, 32, r0
-
-	/* Check cause */
-	getcon	EXPEVT, r0
-	movi	RESET_CAUSE, r1
-	sub	r1, r0, r1		/* r1=0 if reset */
-	movi	_stext-CONFIG_CACHED_MEMORY_OFFSET, r0
-	ori	r0, 1, r0
-	ptabs	r0, tr0
-	beqi	r1, 0, tr0		/* Jump to start address if reset */
-
-	getcon	EXPEVT, r0
-	movi	DEBUGSS_CAUSE, r1
-	sub	r1, r0, r1		/* r1=0 if single step */
-	pta	single_step_panic, tr0
-	beqi	r1, 0, tr0		/* jump if single step */
-
-	/* Now jump to where we save the registers. */
-	movi	panic_stash_regs-CONFIG_CACHED_MEMORY_OFFSET, r1
-	ptabs	r1, tr0
-	blink	tr0, r63
-
-single_step_panic:
-	/* We are in a handler with Single Step set. We need to resume the
-	 * handler, by turning on MMU & turning off Single Step. */
-	getcon	SSR, r0
-	movi	SR_MMU, r1
-	or	r0, r1, r0
-	movi	~SR_SS, r1
-	and	r0, r1, r0
-	putcon	r0, SSR
-	/* Restore EXPEVT, as the rte won't do this */
-	getcon	PEXPEVT, r0
-	putcon	r0, EXPEVT
-	/* Restore regs */
-	ld.q	SP, 32, r0
-	ptabs	r0, tr0
-	ld.q	SP, 0, r0
-	ld.q	SP, 8, r1
-	getcon	DCR, SP
-	synco
-	rte
-
-
-	.balign	256
-debug_exception:
-	synco	/* TAKum03020 (but probably a good idea anyway.) */
-	/*
-	 * Single step/software_break_point first level handler.
-	 * Called with MMU off, so the first thing we do is enable it
-	 * by doing an rte with appropriate SSR.
-	 */
-	putcon	SP, DCR
-	/* Save SSR & SPC, together with R0 & R1, as we need to use 2 regs. */
-	movi	resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP
-
-	/* With the MMU off, we are bypassing the cache, so purge any
-         * data that will be made stale by the following stores.
-         */
-	ocbp	SP, 0
-	synco
-
-	st.q	SP, 0, r0
-	st.q	SP, 8, r1
-	getcon	SPC, r0
-	st.q	SP, 16, r0
-	getcon	SSR, r0
-	st.q	SP, 24, r0
-
-	/* Enable MMU, block exceptions, set priv mode, disable single step */
-	movi	SR_MMU | SR_BL | SR_MD, r1
-	or	r0, r1, r0
-	movi	~SR_SS, r1
-	and	r0, r1, r0
-	putcon	r0, SSR
-	/* Force control to debug_exception_2 when rte is executed */
-	movi	debug_exeception_2, r0
-	ori	r0, 1, r0      /* force SHmedia, just in case */
-	putcon	r0, SPC
-	getcon	DCR, SP
-	synco
-	rte
-debug_exeception_2:
-	/* Restore saved regs */
-	putcon	SP, KCR1
-	movi	resvec_save_area, SP
-	ld.q	SP, 24, r0
-	putcon	r0, SSR
-	ld.q	SP, 16, r0
-	putcon	r0, SPC
-	ld.q	SP, 0, r0
-	ld.q	SP, 8, r1
-
-	/* Save other original registers into reg_save_area */
-        movi  reg_save_area, SP
-	st.q	SP, SAVED_R2, r2
-	st.q	SP, SAVED_R3, r3
-	st.q	SP, SAVED_R4, r4
-	st.q	SP, SAVED_R5, r5
-	st.q	SP, SAVED_R6, r6
-	st.q	SP, SAVED_R18, r18
-	gettr	tr0, r3
-	st.q	SP, SAVED_TR0, r3
-
-	/* Set args for debug class handler */
-	getcon	EXPEVT, r2
-	movi	ret_from_exception, r3
-	ori	r3, 1, r3
-	movi	EVENT_DEBUG, r4
-	or	SP, ZERO, r5
-	getcon	KCR1, SP
-	pta	handle_exception, tr0
-	blink	tr0, ZERO
-
-	.balign	256
-debug_interrupt:
-	/* !!! WE COME HERE IN REAL MODE !!! */
-	/* Hook-up debug interrupt to allow various debugging options to be
-	 * hooked into its handler. */
-	/* Save original stack pointer into KCR1 */
-	synco
-	putcon	SP, KCR1
-	movi	resvec_save_area-CONFIG_CACHED_MEMORY_OFFSET, SP
-	ocbp	SP, 0
-	ocbp	SP, 32
-	synco
-
-	/* Save other original registers into reg_save_area thru real addresses */
-	st.q	SP, SAVED_R2, r2
-	st.q	SP, SAVED_R3, r3
-	st.q	SP, SAVED_R4, r4
-	st.q	SP, SAVED_R5, r5
-	st.q	SP, SAVED_R6, r6
-	st.q	SP, SAVED_R18, r18
-	gettr	tr0, r3
-	st.q	SP, SAVED_TR0, r3
-
-	/* move (spc,ssr)->(pspc,pssr).  The rte will shift
-	   them back again, so that they look like the originals
-	   as far as the real handler code is concerned. */
-	getcon	spc, r6
-	putcon	r6, pspc
-	getcon	ssr, r6
-	putcon	r6, pssr
-
-	! construct useful SR for handle_exception
-	movi	3, r6
-	shlli	r6, 30, r6
-	getcon	sr, r18
-	or	r18, r6, r6
-	putcon	r6, ssr
-
-	! SSR is now the current SR with the MD and MMU bits set
-	! i.e. the rte will switch back to priv mode and put
-	! the mmu back on
-
-	! construct spc
-	movi	handle_exception, r18
-	ori	r18, 1, r18		! for safety (do we need this?)
-	putcon	r18, spc
-
-	/* Set args for Non-debug, Not a TLB miss class handler */
-
-	! EXPEVT==0x80 is unused, so 'steal' this value to put the
-	! debug interrupt handler in the vectoring table
-	movi	0x80, r2
-	movi	ret_from_exception, r3
-	ori	r3, 1, r3
-	movi	EVENT_FAULT_NOT_TLB, r4
-
-	or	SP, ZERO, r5
-	movi	CONFIG_CACHED_MEMORY_OFFSET, r6
-	add	r6, r5, r5
-	getcon	KCR1, SP
-
-	synco	! for safety
-	rte	! -> handle_exception, switch back to priv mode again
-
-LRESVEC_block_end:			/* Marker. Unused. */
-
-	.balign	TEXT_SIZE
-
-/*
- * Second level handler for VBR-based exceptions. Pre-handler.
- * In common to all stack-frame sensitive handlers.
- *
- * Inputs:
- * (KCR0) Current [current task union]
- * (KCR1) Original SP
- * (r2)   INTEVT/EXPEVT
- * (r3)   appropriate return address
- * (r4)   Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault, 3=debug)
- * (r5)   Pointer to reg_save_area
- * (SP)   Original SP
- *
- * Available registers:
- * (r6)
- * (r18)
- * (tr0)
- *
- */
-handle_exception:
-	/* Common 2nd level handler. */
-
-	/* First thing we need an appropriate stack pointer */
-	getcon	SSR, r6
-	shlri	r6, 30, r6
-	andi	r6, 1, r6
-	pta	stack_ok, tr0
-	bne	r6, ZERO, tr0		/* Original stack pointer is fine */
-
-	/* Set stack pointer for user fault */
-	getcon	KCR0, SP
-	movi	THREAD_SIZE, r6		/* Point to the end */
-	add	SP, r6, SP
-
-stack_ok:
-
-/* DEBUG : check for underflow/overflow of the kernel stack */
-	pta	no_underflow, tr0
-	getcon  KCR0, r6
-	movi	1024, r18
-	add	r6, r18, r6
-	bge	SP, r6, tr0 	! ? below 1k from bottom of stack : danger zone
-
-/* Just panic to cause a crash. */
-bad_sp:
-	ld.b	r63, 0, r6
-	nop
-
-no_underflow:
-	pta	bad_sp, tr0
-	getcon	kcr0, r6
-	movi	THREAD_SIZE, r18
-	add	r18, r6, r6
-	bgt	SP, r6, tr0	! sp above the stack
-
-	/* Make some room for the BASIC frame. */
-	movi	-(FRAME_SIZE), r6
-	add	SP, r6, SP
-
-/* Could do this with no stalling if we had another spare register, but the
-   code below will be OK. */
-	ld.q	r5, SAVED_R2, r6
-	ld.q	r5, SAVED_R3, r18
-	st.q	SP, FRAME_R(2), r6
-	ld.q	r5, SAVED_R4, r6
-	st.q	SP, FRAME_R(3), r18
-	ld.q	r5, SAVED_R5, r18
-	st.q	SP, FRAME_R(4), r6
-	ld.q	r5, SAVED_R6, r6
-	st.q	SP, FRAME_R(5), r18
-	ld.q	r5, SAVED_R18, r18
-	st.q	SP, FRAME_R(6), r6
-	ld.q	r5, SAVED_TR0, r6
-	st.q	SP, FRAME_R(18), r18
-	st.q	SP, FRAME_T(0), r6
-
-	/* Keep old SP around */
-	getcon	KCR1, r6
-
-	/* Save the rest of the general purpose registers */
-	st.q	SP, FRAME_R(0), r0
-	st.q	SP, FRAME_R(1), r1
-	st.q	SP, FRAME_R(7), r7
-	st.q	SP, FRAME_R(8), r8
-	st.q	SP, FRAME_R(9), r9
-	st.q	SP, FRAME_R(10), r10
-	st.q	SP, FRAME_R(11), r11
-	st.q	SP, FRAME_R(12), r12
-	st.q	SP, FRAME_R(13), r13
-	st.q	SP, FRAME_R(14), r14
-
-	/* SP is somewhere else */
-	st.q	SP, FRAME_R(15), r6
-
-	st.q	SP, FRAME_R(16), r16
-	st.q	SP, FRAME_R(17), r17
-	/* r18 is saved earlier. */
-	st.q	SP, FRAME_R(19), r19
-	st.q	SP, FRAME_R(20), r20
-	st.q	SP, FRAME_R(21), r21
-	st.q	SP, FRAME_R(22), r22
-	st.q	SP, FRAME_R(23), r23
-	st.q	SP, FRAME_R(24), r24
-	st.q	SP, FRAME_R(25), r25
-	st.q	SP, FRAME_R(26), r26
-	st.q	SP, FRAME_R(27), r27
-	st.q	SP, FRAME_R(28), r28
-	st.q	SP, FRAME_R(29), r29
-	st.q	SP, FRAME_R(30), r30
-	st.q	SP, FRAME_R(31), r31
-	st.q	SP, FRAME_R(32), r32
-	st.q	SP, FRAME_R(33), r33
-	st.q	SP, FRAME_R(34), r34
-	st.q	SP, FRAME_R(35), r35
-	st.q	SP, FRAME_R(36), r36
-	st.q	SP, FRAME_R(37), r37
-	st.q	SP, FRAME_R(38), r38
-	st.q	SP, FRAME_R(39), r39
-	st.q	SP, FRAME_R(40), r40
-	st.q	SP, FRAME_R(41), r41
-	st.q	SP, FRAME_R(42), r42
-	st.q	SP, FRAME_R(43), r43
-	st.q	SP, FRAME_R(44), r44
-	st.q	SP, FRAME_R(45), r45
-	st.q	SP, FRAME_R(46), r46
-	st.q	SP, FRAME_R(47), r47
-	st.q	SP, FRAME_R(48), r48
-	st.q	SP, FRAME_R(49), r49
-	st.q	SP, FRAME_R(50), r50
-	st.q	SP, FRAME_R(51), r51
-	st.q	SP, FRAME_R(52), r52
-	st.q	SP, FRAME_R(53), r53
-	st.q	SP, FRAME_R(54), r54
-	st.q	SP, FRAME_R(55), r55
-	st.q	SP, FRAME_R(56), r56
-	st.q	SP, FRAME_R(57), r57
-	st.q	SP, FRAME_R(58), r58
-	st.q	SP, FRAME_R(59), r59
-	st.q	SP, FRAME_R(60), r60
-	st.q	SP, FRAME_R(61), r61
-	st.q	SP, FRAME_R(62), r62
-
-	/*
-	 * Save the S* registers.
-	 */
-	getcon	SSR, r61
-	st.q	SP, FRAME_S(FSSR), r61
-	getcon	SPC, r62
-	st.q	SP, FRAME_S(FSPC), r62
-	movi	-1, r62			/* Reset syscall_nr */
-	st.q	SP, FRAME_S(FSYSCALL_ID), r62
-
-	/* Save the rest of the target registers */
-	gettr	tr1, r6
-	st.q	SP, FRAME_T(1), r6
-	gettr	tr2, r6
-	st.q	SP, FRAME_T(2), r6
-	gettr	tr3, r6
-	st.q	SP, FRAME_T(3), r6
-	gettr	tr4, r6
-	st.q	SP, FRAME_T(4), r6
-	gettr	tr5, r6
-	st.q	SP, FRAME_T(5), r6
-	gettr	tr6, r6
-	st.q	SP, FRAME_T(6), r6
-	gettr	tr7, r6
-	st.q	SP, FRAME_T(7), r6
-
-	! setup FP so that unwinder can wind back through nested kernel mode
-	! exceptions
-	add	SP, ZERO, r14
-
-#ifdef CONFIG_POOR_MANS_STRACE
-	/* We've pushed all the registers now, so only r2-r4 hold anything
-	 * useful. Move them into callee save registers */
-	or	r2, ZERO, r28
-	or	r3, ZERO, r29
-	or	r4, ZERO, r30
-
-	/* Preserve r2 as the event code */
-	movi	evt_debug, r3
-	ori	r3, 1, r3
-	ptabs	r3, tr0
-
-	or	SP, ZERO, r6
-	getcon	TRA, r5
-	blink	tr0, LINK
-
-	or	r28, ZERO, r2
-	or	r29, ZERO, r3
-	or	r30, ZERO, r4
-#endif
-
-	/* For syscall and debug race condition, get TRA now */
-	getcon	TRA, r5
-
-	/* We are in a safe position to turn SR.BL off, but set IMASK=0xf
-	 * Also set FD, to catch FPU usage in the kernel.
-	 *
-	 * benedict.gaster@superh.com 29/07/2002
-	 *
-	 * On all SH5-101 revisions it is unsafe to raise the IMASK and at the
-	 * same time change BL from 1->0, as any pending interrupt of a level
-	 * higher than he previous value of IMASK will leak through and be
-	 * taken unexpectedly.
-	 *
-	 * To avoid this we raise the IMASK and then issue another PUTCON to
-	 * enable interrupts.
-         */
-	getcon	SR, r6
-	movi	SR_IMASK | SR_FD, r7
-	or	r6, r7, r6
-	putcon	r6, SR
-	movi	SR_UNBLOCK_EXC, r7
-	and	r6, r7, r6
-	putcon	r6, SR
-
-
-	/* Now call the appropriate 3rd level handler */
-	or	r3, ZERO, LINK
-	movi	trap_jtable, r3
-	shlri	r2, 3, r2
-	ldx.l	r2, r3, r3
-	shlri	r2, 2, r2
-	ptabs	r3, tr0
-	or	SP, ZERO, r3
-	blink	tr0, ZERO
-
-/*
- * Second level handler for VBR-based exceptions. Post-handlers.
- *
- * Post-handlers for interrupts (ret_from_irq), exceptions
- * (ret_from_exception) and common reentrance doors (restore_all
- * to get back to the original context, ret_from_syscall loop to
- * check kernel exiting).
- *
- * ret_with_reschedule and work_notifysig are an inner lables of
- * the ret_from_syscall loop.
- *
- * In common to all stack-frame sensitive handlers.
- *
- * Inputs:
- * (SP)   struct pt_regs *, original register's frame pointer (basic)
- *
- */
-	.global ret_from_irq
-ret_from_irq:
-#ifdef CONFIG_POOR_MANS_STRACE
-	pta	evt_debug_ret_from_irq, tr0
-	ori	SP, 0, r2
-	blink	tr0, LINK
-#endif
-	ld.q	SP, FRAME_S(FSSR), r6
-	shlri	r6, 30, r6
-	andi	r6, 1, r6
-	pta	resume_kernel, tr0
-	bne	r6, ZERO, tr0		/* no further checks */
-	STI()
-	pta	ret_with_reschedule, tr0
-	blink	tr0, ZERO		/* Do not check softirqs */
-
-	.global ret_from_exception
-ret_from_exception:
-	preempt_stop()
-
-#ifdef CONFIG_POOR_MANS_STRACE
-	pta	evt_debug_ret_from_exc, tr0
-	ori	SP, 0, r2
-	blink	tr0, LINK
-#endif
-
-	ld.q	SP, FRAME_S(FSSR), r6
-	shlri	r6, 30, r6
-	andi	r6, 1, r6
-	pta	resume_kernel, tr0
-	bne	r6, ZERO, tr0		/* no further checks */
-
-	/* Check softirqs */
-
-#ifdef CONFIG_PREEMPT
-	pta   ret_from_syscall, tr0
-	blink   tr0, ZERO
-
-resume_kernel:
-	pta	restore_all, tr0
-
-	getcon	KCR0, r6
-	ld.l	r6, TI_PRE_COUNT, r7
-	beq/u	r7, ZERO, tr0
-
-need_resched:
-	ld.l	r6, TI_FLAGS, r7
-	movi	(1 << TIF_NEED_RESCHED), r8
-	and	r8, r7, r8
-	bne	r8, ZERO, tr0
-
-	getcon	SR, r7
-	andi	r7, 0xf0, r7
-	bne	r7, ZERO, tr0
-
-	movi	((PREEMPT_ACTIVE >> 16) & 65535), r8
-	shori	(PREEMPT_ACTIVE & 65535), r8
-	st.l	r6, TI_PRE_COUNT, r8
-
-	STI()
-	movi	schedule, r7
-	ori	r7, 1, r7
-	ptabs	r7, tr1
-	blink	tr1, LINK
-
-	st.l	r6, TI_PRE_COUNT, ZERO
-	CLI()
-
-	pta	need_resched, tr1
-	blink	tr1, ZERO
-#endif
-
-	.global ret_from_syscall
-ret_from_syscall:
-
-ret_with_reschedule:
-	getcon	KCR0, r6		! r6 contains current_thread_info
-	ld.l	r6, TI_FLAGS, r7	! r7 contains current_thread_info->flags
-
-	! FIXME:!!!
-	! no handling of TIF_SYSCALL_TRACE yet!!
-
-	movi	_TIF_NEED_RESCHED, r8
-	and	r8, r7, r8
-	pta	work_resched, tr0
-	bne	r8, ZERO, tr0
-
-	pta	restore_all, tr1
-
-	movi	(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r8
-	and	r8, r7, r8
-	pta	work_notifysig, tr0
-	bne	r8, ZERO, tr0
-
-	blink	tr1, ZERO
-
-work_resched:
-	pta	ret_from_syscall, tr0
-	gettr	tr0, LINK
-	movi	schedule, r6
-	ptabs	r6, tr0
-	blink	tr0, ZERO		/* Call schedule(), return on top */
-
-work_notifysig:
-	gettr	tr1, LINK
-
-	movi	do_signal, r6
-	ptabs	r6, tr0
-	or	SP, ZERO, r2
-	or	ZERO, ZERO, r3
-	blink	tr0, LINK	    /* Call do_signal(regs, 0), return here */
-
-restore_all:
-	/* Do prefetches */
-
-	ld.q	SP, FRAME_T(0), r6
-	ld.q	SP, FRAME_T(1), r7
-	ld.q	SP, FRAME_T(2), r8
-	ld.q	SP, FRAME_T(3), r9
-	ptabs	r6, tr0
-	ptabs	r7, tr1
-	ptabs	r8, tr2
-	ptabs	r9, tr3
-	ld.q	SP, FRAME_T(4), r6
-	ld.q	SP, FRAME_T(5), r7
-	ld.q	SP, FRAME_T(6), r8
-	ld.q	SP, FRAME_T(7), r9
-	ptabs	r6, tr4
-	ptabs	r7, tr5
-	ptabs	r8, tr6
-	ptabs	r9, tr7
-
-	ld.q	SP, FRAME_R(0), r0
-	ld.q	SP, FRAME_R(1), r1
-	ld.q	SP, FRAME_R(2), r2
-	ld.q	SP, FRAME_R(3), r3
-	ld.q	SP, FRAME_R(4), r4
-	ld.q	SP, FRAME_R(5), r5
-	ld.q	SP, FRAME_R(6), r6
-	ld.q	SP, FRAME_R(7), r7
-	ld.q	SP, FRAME_R(8), r8
-	ld.q	SP, FRAME_R(9), r9
-	ld.q	SP, FRAME_R(10), r10
-	ld.q	SP, FRAME_R(11), r11
-	ld.q	SP, FRAME_R(12), r12
-	ld.q	SP, FRAME_R(13), r13
-	ld.q	SP, FRAME_R(14), r14
-
-	ld.q	SP, FRAME_R(16), r16
-	ld.q	SP, FRAME_R(17), r17
-	ld.q	SP, FRAME_R(18), r18
-	ld.q	SP, FRAME_R(19), r19
-	ld.q	SP, FRAME_R(20), r20
-	ld.q	SP, FRAME_R(21), r21
-	ld.q	SP, FRAME_R(22), r22
-	ld.q	SP, FRAME_R(23), r23
-	ld.q	SP, FRAME_R(24), r24
-	ld.q	SP, FRAME_R(25), r25
-	ld.q	SP, FRAME_R(26), r26
-	ld.q	SP, FRAME_R(27), r27
-	ld.q	SP, FRAME_R(28), r28
-	ld.q	SP, FRAME_R(29), r29
-	ld.q	SP, FRAME_R(30), r30
-	ld.q	SP, FRAME_R(31), r31
-	ld.q	SP, FRAME_R(32), r32
-	ld.q	SP, FRAME_R(33), r33
-	ld.q	SP, FRAME_R(34), r34
-	ld.q	SP, FRAME_R(35), r35
-	ld.q	SP, FRAME_R(36), r36
-	ld.q	SP, FRAME_R(37), r37
-	ld.q	SP, FRAME_R(38), r38
-	ld.q	SP, FRAME_R(39), r39
-	ld.q	SP, FRAME_R(40), r40
-	ld.q	SP, FRAME_R(41), r41
-	ld.q	SP, FRAME_R(42), r42
-	ld.q	SP, FRAME_R(43), r43
-	ld.q	SP, FRAME_R(44), r44
-	ld.q	SP, FRAME_R(45), r45
-	ld.q	SP, FRAME_R(46), r46
-	ld.q	SP, FRAME_R(47), r47
-	ld.q	SP, FRAME_R(48), r48
-	ld.q	SP, FRAME_R(49), r49
-	ld.q	SP, FRAME_R(50), r50
-	ld.q	SP, FRAME_R(51), r51
-	ld.q	SP, FRAME_R(52), r52
-	ld.q	SP, FRAME_R(53), r53
-	ld.q	SP, FRAME_R(54), r54
-	ld.q	SP, FRAME_R(55), r55
-	ld.q	SP, FRAME_R(56), r56
-	ld.q	SP, FRAME_R(57), r57
-	ld.q	SP, FRAME_R(58), r58
-
-	getcon	SR, r59
-	movi	SR_BLOCK_EXC, r60
-	or	r59, r60, r59
-	putcon	r59, SR			/* SR.BL = 1, keep nesting out */
-	ld.q	SP, FRAME_S(FSSR), r61
-	ld.q	SP, FRAME_S(FSPC), r62
-	movi	SR_ASID_MASK, r60
-	and	r59, r60, r59
-	andc	r61, r60, r61		/* Clear out older ASID */
-	or	r59, r61, r61		/* Retain current ASID */
-	putcon	r61, SSR
-	putcon	r62, SPC
-
-	/* Ignore FSYSCALL_ID */
-
-	ld.q	SP, FRAME_R(59), r59
-	ld.q	SP, FRAME_R(60), r60
-	ld.q	SP, FRAME_R(61), r61
-	ld.q	SP, FRAME_R(62), r62
-
-	/* Last touch */
-	ld.q	SP, FRAME_R(15), SP
-	rte
-	nop
-
-/*
- * Third level handlers for VBR-based exceptions. Adapting args to
- * and/or deflecting to fourth level handlers.
- *
- * Fourth level handlers interface.
- * Most are C-coded handlers directly pointed by the trap_jtable.
- * (Third = Fourth level)
- * Inputs:
- * (r2)   fault/interrupt code, entry number (e.g. NMI = 14,
- *	  IRL0-3 (0000) = 16, RTLBMISS = 2, SYSCALL = 11, etc ...)
- * (r3)   struct pt_regs *, original register's frame pointer
- * (r4)   Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault)
- * (r5)   TRA control register (for syscall/debug benefit only)
- * (LINK) return address
- * (SP)   = r3
- *
- * Kernel TLB fault handlers will get a slightly different interface.
- * (r2)   struct pt_regs *, original register's frame pointer
- * (r3)   writeaccess, whether it's a store fault as opposed to load fault
- * (r4)   execaccess, whether it's a ITLB fault as opposed to DTLB fault
- * (r5)   Effective Address of fault
- * (LINK) return address
- * (SP)   = r2
- *
- * fpu_error_or_IRQ? is a helper to deflect to the right cause.
- *
- */
-tlb_miss_load:
-	or	SP, ZERO, r2
-	or	ZERO, ZERO, r3		/* Read */
-	or	ZERO, ZERO, r4		/* Data */
-	getcon	TEA, r5
-	pta	call_do_page_fault, tr0
-	beq	ZERO, ZERO, tr0
-
-tlb_miss_store:
-	or	SP, ZERO, r2
-	movi	1, r3			/* Write */
-	or	ZERO, ZERO, r4		/* Data */
-	getcon	TEA, r5
-	pta	call_do_page_fault, tr0
-	beq	ZERO, ZERO, tr0
-
-itlb_miss_or_IRQ:
-	pta	its_IRQ, tr0
-	beqi/u	r4, EVENT_INTERRUPT, tr0
-	or	SP, ZERO, r2
-	or	ZERO, ZERO, r3		/* Read */
-	movi	1, r4			/* Text */
-	getcon	TEA, r5
-	/* Fall through */
-
-call_do_page_fault:
-	movi	do_page_fault, r6
-        ptabs	r6, tr0
-        blink	tr0, ZERO
-
-fpu_error_or_IRQA:
-	pta	its_IRQ, tr0
-	beqi/l	r4, EVENT_INTERRUPT, tr0
-#ifdef CONFIG_SH_FPU
-	movi	do_fpu_state_restore, r6
-#else
-	movi	do_exception_error, r6
-#endif
-	ptabs	r6, tr0
-	blink	tr0, ZERO
-
-fpu_error_or_IRQB:
-	pta	its_IRQ, tr0
-	beqi/l	r4, EVENT_INTERRUPT, tr0
-#ifdef CONFIG_SH_FPU
-	movi	do_fpu_state_restore, r6
-#else
-	movi	do_exception_error, r6
-#endif
-	ptabs	r6, tr0
-	blink	tr0, ZERO
-
-its_IRQ:
-	movi	do_IRQ, r6
-	ptabs	r6, tr0
-	blink	tr0, ZERO
-
-/*
- * system_call/unknown_trap third level handler:
- *
- * Inputs:
- * (r2)   fault/interrupt code, entry number (TRAP = 11)
- * (r3)   struct pt_regs *, original register's frame pointer
- * (r4)   Not used. Event (0=interrupt, 1=TLB miss fault, 2=Not TLB miss fault)
- * (r5)   TRA Control Reg (0x00xyzzzz: x=1 SYSCALL, y = #args, z=nr)
- * (SP)   = r3
- * (LINK) return address: ret_from_exception
- * (*r3)  Syscall parms: SC#, arg0, arg1, ..., arg5 in order (Saved r2/r7)
- *
- * Outputs:
- * (*r3)  Syscall reply (Saved r2)
- * (LINK) In case of syscall only it can be scrapped.
- *        Common second level post handler will be ret_from_syscall.
- *        Common (non-trace) exit point to that is syscall_ret (saving
- *        result to r2). Common bad exit point is syscall_bad (returning
- *        ENOSYS then saved to r2).
- *
- */
-
-unknown_trap:
-	/* Unknown Trap or User Trace */
-	movi	do_unknown_trapa, r6
-	ptabs	r6, tr0
-        ld.q    r3, FRAME_R(9), r2	/* r2 = #arg << 16 | syscall # */
-        andi    r2, 0x1ff, r2		/* r2 = syscall # */
-	blink	tr0, LINK
-
-	pta	syscall_ret, tr0
-	blink	tr0, ZERO
-
-        /* New syscall implementation*/
-system_call:
-	pta	unknown_trap, tr0
-        or      r5, ZERO, r4            /* TRA (=r5) -> r4 */
-        shlri   r4, 20, r4
-	bnei	r4, 1, tr0		/* unknown_trap if not 0x1yzzzz */
-
-        /* It's a system call */
-	st.q    r3, FRAME_S(FSYSCALL_ID), r5 	/* ID (0x1yzzzz) -> stack */
-	andi    r5, 0x1ff, r5			/* syscall # -> r5	  */
-
-	STI()
-
-	pta	syscall_allowed, tr0
-	movi	NR_syscalls - 1, r4	/* Last valid */
-	bgeu/l	r4, r5, tr0
-
-syscall_bad:
-	/* Return ENOSYS ! */
-	movi	-(ENOSYS), r2		/* Fall-through */
-
-	.global syscall_ret
-syscall_ret:
-	st.q	SP, FRAME_R(9), r2	/* Expecting SP back to BASIC frame */
-
-#ifdef CONFIG_POOR_MANS_STRACE
-	/* nothing useful in registers at this point */
-
-	movi	evt_debug2, r5
-	ori	r5, 1, r5
-	ptabs	r5, tr0
-	ld.q	SP, FRAME_R(9), r2
-	or	SP, ZERO, r3
-	blink	tr0, LINK
-#endif
-
-	ld.q	SP, FRAME_S(FSPC), r2
-	addi	r2, 4, r2		/* Move PC, being pre-execution event */
-	st.q	SP, FRAME_S(FSPC), r2
-	pta	ret_from_syscall, tr0
-	blink	tr0, ZERO
-
-
-/*  A different return path for ret_from_fork, because we now need
- *  to call schedule_tail with the later kernels. Because prev is
- *  loaded into r2 by switch_to() means we can just call it straight  away
- */
-
-.global	ret_from_fork
-ret_from_fork:
-
-	movi	schedule_tail,r5
-	ori	r5, 1, r5
-	ptabs	r5, tr0
-	blink	tr0, LINK
-
-#ifdef CONFIG_POOR_MANS_STRACE
-	/* nothing useful in registers at this point */
-
-	movi	evt_debug2, r5
-	ori	r5, 1, r5
-	ptabs	r5, tr0
-	ld.q	SP, FRAME_R(9), r2
-	or	SP, ZERO, r3
-	blink	tr0, LINK
-#endif
-
-	ld.q	SP, FRAME_S(FSPC), r2
-	addi	r2, 4, r2		/* Move PC, being pre-execution event */
-	st.q	SP, FRAME_S(FSPC), r2
-	pta	ret_from_syscall, tr0
-	blink	tr0, ZERO
-
-
-
-syscall_allowed:
-	/* Use LINK to deflect the exit point, default is syscall_ret */
-	pta	syscall_ret, tr0
-	gettr	tr0, LINK
-	pta	syscall_notrace, tr0
-
-	getcon	KCR0, r2
-	ld.l	r2, TI_FLAGS, r4
-	movi	(1 << TIF_SYSCALL_TRACE), r6
-	and	r6, r4, r6
-	beq/l	r6, ZERO, tr0
-
-	/* Trace it by calling syscall_trace before and after */
-	movi	syscall_trace, r4
-	ptabs	r4, tr0
-	blink	tr0, LINK
-	/* Reload syscall number as r5 is trashed by syscall_trace */
-	ld.q	SP, FRAME_S(FSYSCALL_ID), r5
-	andi	r5, 0x1ff, r5
-
-	pta	syscall_ret_trace, tr0
-	gettr	tr0, LINK
-
-syscall_notrace:
-	/* Now point to the appropriate 4th level syscall handler */
-	movi	sys_call_table, r4
-	shlli	r5, 2, r5
-	ldx.l	r4, r5, r5
-	ptabs	r5, tr0
-
-	/* Prepare original args */
-	ld.q	SP, FRAME_R(2), r2
-	ld.q	SP, FRAME_R(3), r3
-	ld.q	SP, FRAME_R(4), r4
-	ld.q	SP, FRAME_R(5), r5
-	ld.q	SP, FRAME_R(6), r6
-	ld.q	SP, FRAME_R(7), r7
-
-	/* And now the trick for those syscalls requiring regs * ! */
-	or	SP, ZERO, r8
-
-	/* Call it */
-	blink	tr0, ZERO	/* LINK is already properly set */
-
-syscall_ret_trace:
-	/* We get back here only if under trace */
-	st.q	SP, FRAME_R(9), r2	/* Save return value */
-
-	movi	syscall_trace, LINK
-	ptabs	LINK, tr0
-	blink	tr0, LINK
-
-	/* This needs to be done after any syscall tracing */
-	ld.q	SP, FRAME_S(FSPC), r2
-	addi	r2, 4, r2	/* Move PC, being pre-execution event */
-	st.q	SP, FRAME_S(FSPC), r2
-
-	pta	ret_from_syscall, tr0
-	blink	tr0, ZERO		/* Resume normal return sequence */
-
-/*
- * --- Switch to running under a particular ASID and return the previous ASID value
- * --- The caller is assumed to have done a cli before calling this.
- *
- * Input r2 : new ASID
- * Output r2 : old ASID
- */
-
-	.global switch_and_save_asid
-switch_and_save_asid:
-	getcon	sr, r0
-	movi	255, r4
-	shlli 	r4, 16, r4	/* r4 = mask to select ASID */
-	and	r0, r4, r3	/* r3 = shifted old ASID */
-	andi	r2, 255, r2	/* mask down new ASID */
-	shlli	r2, 16, r2	/* align new ASID against SR.ASID */
-	andc	r0, r4, r0	/* efface old ASID from SR */
-	or	r0, r2, r0	/* insert the new ASID */
-	putcon	r0, ssr
-	movi	1f, r0
-	putcon	r0, spc
-	rte
-	nop
-1:
-	ptabs	LINK, tr0
-	shlri	r3, 16, r2	/* r2 = old ASID */
-	blink tr0, r63
-
-	.global	route_to_panic_handler
-route_to_panic_handler:
-	/* Switch to real mode, goto panic_handler, don't return.  Useful for
-	   last-chance debugging, e.g. if no output wants to go to the console.
-	   */
-
-	movi	panic_handler - CONFIG_CACHED_MEMORY_OFFSET, r1
-	ptabs	r1, tr0
-	pta	1f, tr1
-	gettr	tr1, r0
-	putcon	r0, spc
-	getcon	sr, r0
-	movi	1, r1
-	shlli	r1, 31, r1
-	andc	r0, r1, r0
-	putcon	r0, ssr
-	rte
-	nop
-1:	/* Now in real mode */
-	blink tr0, r63
-	nop
-
-	.global peek_real_address_q
-peek_real_address_q:
-	/* Two args:
-	   r2 : real mode address to peek
-	   r2(out) : result quadword
-
-	   This is provided as a cheapskate way of manipulating device
-	   registers for debugging (to avoid the need to onchip_remap the debug
-	   module, and to avoid the need to onchip_remap the watchpoint
-	   controller in a way that identity maps sufficient bits to avoid the
-	   SH5-101 cut2 silicon defect).
-
-	   This code is not performance critical
-	*/
-
-	add.l	r2, r63, r2	/* sign extend address */
-	getcon	sr, r0		/* r0 = saved original SR */
-	movi	1, r1
-	shlli	r1, 28, r1
-	or	r0, r1, r1	/* r0 with block bit set */
-	putcon	r1, sr		/* now in critical section */
-	movi	1, r36
-	shlli	r36, 31, r36
-	andc	r1, r36, r1	/* turn sr.mmu off in real mode section */
-
-	putcon	r1, ssr
-	movi	.peek0 - CONFIG_CACHED_MEMORY_OFFSET, r36 /* real mode target address */
-	movi	1f, r37		/* virtual mode return addr */
-	putcon	r36, spc
-
-	synco
-	rte
-	nop
-
-.peek0:	/* come here in real mode, don't touch caches!!
-           still in critical section (sr.bl==1) */
-	putcon	r0, ssr
-	putcon	r37, spc
-	/* Here's the actual peek.  If the address is bad, all bets are now off
-	 * what will happen (handlers invoked in real-mode = bad news) */
-	ld.q	r2, 0, r2
-	synco
-	rte	/* Back to virtual mode */
-	nop
-
-1:
-	ptabs	LINK, tr0
-	blink	tr0, r63
-
-	.global poke_real_address_q
-poke_real_address_q:
-	/* Two args:
-	   r2 : real mode address to poke
-	   r3 : quadword value to write.
-
-	   This is provided as a cheapskate way of manipulating device
-	   registers for debugging (to avoid the need to onchip_remap the debug
-	   module, and to avoid the need to onchip_remap the watchpoint
-	   controller in a way that identity maps sufficient bits to avoid the
-	   SH5-101 cut2 silicon defect).
-
-	   This code is not performance critical
-	*/
-
-	add.l	r2, r63, r2	/* sign extend address */
-	getcon	sr, r0		/* r0 = saved original SR */
-	movi	1, r1
-	shlli	r1, 28, r1
-	or	r0, r1, r1	/* r0 with block bit set */
-	putcon	r1, sr		/* now in critical section */
-	movi	1, r36
-	shlli	r36, 31, r36
-	andc	r1, r36, r1	/* turn sr.mmu off in real mode section */
-
-	putcon	r1, ssr
-	movi	.poke0-CONFIG_CACHED_MEMORY_OFFSET, r36 /* real mode target address */
-	movi	1f, r37		/* virtual mode return addr */
-	putcon	r36, spc
-
-	synco
-	rte
-	nop
-
-.poke0:	/* come here in real mode, don't touch caches!!
-           still in critical section (sr.bl==1) */
-	putcon	r0, ssr
-	putcon	r37, spc
-	/* Here's the actual poke.  If the address is bad, all bets are now off
-	 * what will happen (handlers invoked in real-mode = bad news) */
-	st.q	r2, 0, r3
-	synco
-	rte	/* Back to virtual mode */
-	nop
-
-1:
-	ptabs	LINK, tr0
-	blink	tr0, r63
-
-/*
- * --- User Access Handling Section
- */
-
-/*
- * User Access support. It all moved to non inlined Assembler
- * functions in here.
- *
- * __kernel_size_t __copy_user(void *__to, const void *__from,
- *			       __kernel_size_t __n)
- *
- * Inputs:
- * (r2)  target address
- * (r3)  source address
- * (r4)  size in bytes
- *
- * Ouputs:
- * (*r2) target data
- * (r2)  non-copied bytes
- *
- * If a fault occurs on the user pointer, bail out early and return the
- * number of bytes not copied in r2.
- * Strategy : for large blocks, call a real memcpy function which can
- * move >1 byte at a time using unaligned ld/st instructions, and can
- * manipulate the cache using prefetch + alloco to improve the speed
- * further.  If a fault occurs in that function, just revert to the
- * byte-by-byte approach used for small blocks; this is rare so the
- * performance hit for that case does not matter.
- *
- * For small blocks it's not worth the overhead of setting up and calling
- * the memcpy routine; do the copy a byte at a time.
- *
- */
-	.global	__copy_user
-__copy_user:
-	pta	__copy_user_byte_by_byte, tr1
-	movi	16, r0 ! this value is a best guess, should tune it by benchmarking
-	bge/u	r0, r4, tr1
-	pta copy_user_memcpy, tr0
-	addi	SP, -32, SP
-	/* Save arguments in case we have to fix-up unhandled page fault */
-	st.q	SP, 0, r2
-	st.q	SP, 8, r3
-	st.q	SP, 16, r4
-	st.q	SP, 24, r35 ! r35 is callee-save
-	/* Save LINK in a register to reduce RTS time later (otherwise
-	   ld SP,*,LINK;ptabs LINK;trn;blink trn,r63 becomes a critical path) */
-	ori	LINK, 0, r35
-	blink	tr0, LINK
-
-	/* Copy completed normally if we get back here */
-	ptabs	r35, tr0
-	ld.q	SP, 24, r35
-	/* don't restore r2-r4, pointless */
-	/* set result=r2 to zero as the copy must have succeeded. */
-	or	r63, r63, r2
-	addi	SP, 32, SP
-	blink	tr0, r63 ! RTS
-
-	.global __copy_user_fixup
-__copy_user_fixup:
-	/* Restore stack frame */
-	ori	r35, 0, LINK
-	ld.q	SP, 24, r35
-	ld.q	SP, 16, r4
-	ld.q	SP,  8, r3
-	ld.q	SP,  0, r2
-	addi	SP, 32, SP
-	/* Fall through to original code, in the 'same' state we entered with */
-
-/* The slow byte-by-byte method is used if the fast copy traps due to a bad
-   user address.  In that rare case, the speed drop can be tolerated. */
-__copy_user_byte_by_byte:
-	pta	___copy_user_exit, tr1
-	pta	___copy_user1, tr0
-	beq/u	r4, r63, tr1	/* early exit for zero length copy */
-	sub	r2, r3, r0
-	addi	r0, -1, r0
-
-___copy_user1:
-	ld.b	r3, 0, r5		/* Fault address 1 */
-
-	/* Could rewrite this to use just 1 add, but the second comes 'free'
-	   due to load latency */
-	addi	r3, 1, r3
-	addi	r4, -1, r4		/* No real fixup required */
-___copy_user2:
-	stx.b	r3, r0, r5		/* Fault address 2 */
-	bne     r4, ZERO, tr0
-
-___copy_user_exit:
-	or	r4, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-/*
- * __kernel_size_t __clear_user(void *addr, __kernel_size_t size)
- *
- * Inputs:
- * (r2)  target address
- * (r3)  size in bytes
- *
- * Ouputs:
- * (*r2) zero-ed target data
- * (r2)  non-zero-ed bytes
- */
-	.global	__clear_user
-__clear_user:
-	pta	___clear_user_exit, tr1
-	pta	___clear_user1, tr0
-	beq/u	r3, r63, tr1
-
-___clear_user1:
-	st.b	r2, 0, ZERO		/* Fault address */
-	addi	r2, 1, r2
-	addi	r3, -1, r3		/* No real fixup required */
-	bne     r3, ZERO, tr0
-
-___clear_user_exit:
-	or	r3, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-
-/*
- * int __strncpy_from_user(unsigned long __dest, unsigned long __src,
- *			   int __count)
- *
- * Inputs:
- * (r2)  target address
- * (r3)  source address
- * (r4)  maximum size in bytes
- *
- * Ouputs:
- * (*r2) copied data
- * (r2)  -EFAULT (in case of faulting)
- *       copied data (otherwise)
- */
-	.global	__strncpy_from_user
-__strncpy_from_user:
-	pta	___strncpy_from_user1, tr0
-	pta	___strncpy_from_user_done, tr1
-	or	r4, ZERO, r5		/* r5 = original count */
-	beq/u	r4, r63, tr1		/* early exit if r4==0 */
-	movi	-(EFAULT), r6		/* r6 = reply, no real fixup */
-	or	ZERO, ZERO, r7		/* r7 = data, clear top byte of data */
-
-___strncpy_from_user1:
-	ld.b	r3, 0, r7		/* Fault address: only in reading */
-	st.b	r2, 0, r7
-	addi	r2, 1, r2
-	addi	r3, 1, r3
-	beq/u	ZERO, r7, tr1
-	addi	r4, -1, r4		/* return real number of copied bytes */
-	bne/l	ZERO, r4, tr0
-
-___strncpy_from_user_done:
-	sub	r5, r4, r6		/* If done, return copied */
-
-___strncpy_from_user_exit:
-	or	r6, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-/*
- * extern long __strnlen_user(const char *__s, long __n)
- *
- * Inputs:
- * (r2)  source address
- * (r3)  source size in bytes
- *
- * Ouputs:
- * (r2)  -EFAULT (in case of faulting)
- *       string length (otherwise)
- */
-	.global	__strnlen_user
-__strnlen_user:
-	pta	___strnlen_user_set_reply, tr0
-	pta	___strnlen_user1, tr1
-	or	ZERO, ZERO, r5		/* r5 = counter */
-	movi	-(EFAULT), r6		/* r6 = reply, no real fixup */
-	or	ZERO, ZERO, r7		/* r7 = data, clear top byte of data */
-	beq	r3, ZERO, tr0
-
-___strnlen_user1:
-	ldx.b	r2, r5, r7		/* Fault address: only in reading */
-	addi	r3, -1, r3		/* No real fixup */
-	addi	r5, 1, r5
-	beq	r3, ZERO, tr0
-	bne	r7, ZERO, tr1
-! The line below used to be active.  This meant led to a junk byte lying between each pair
-! of entries in the argv & envp structures in memory.  Whilst the program saw the right data
-! via the argv and envp arguments to main, it meant the 'flat' representation visible through
-! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example.
-!	addi	r5, 1, r5		/* Include '\0' */
-
-___strnlen_user_set_reply:
-	or	r5, ZERO, r6		/* If done, return counter */
-
-___strnlen_user_exit:
-	or	r6, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-/*
- * extern long __get_user_asm_?(void *val, long addr)
- *
- * Inputs:
- * (r2)  dest address
- * (r3)  source address (in User Space)
- *
- * Ouputs:
- * (r2)  -EFAULT (faulting)
- *       0 	 (not faulting)
- */
-	.global	__get_user_asm_b
-__get_user_asm_b:
-	or	r2, ZERO, r4
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___get_user_asm_b1:
-	ld.b	r3, 0, r5		/* r5 = data */
-	st.b	r4, 0, r5
-	or	ZERO, ZERO, r2
-
-___get_user_asm_b_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-
-	.global	__get_user_asm_w
-__get_user_asm_w:
-	or	r2, ZERO, r4
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___get_user_asm_w1:
-	ld.w	r3, 0, r5		/* r5 = data */
-	st.w	r4, 0, r5
-	or	ZERO, ZERO, r2
-
-___get_user_asm_w_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-
-	.global	__get_user_asm_l
-__get_user_asm_l:
-	or	r2, ZERO, r4
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___get_user_asm_l1:
-	ld.l	r3, 0, r5		/* r5 = data */
-	st.l	r4, 0, r5
-	or	ZERO, ZERO, r2
-
-___get_user_asm_l_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-
-	.global	__get_user_asm_q
-__get_user_asm_q:
-	or	r2, ZERO, r4
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___get_user_asm_q1:
-	ld.q	r3, 0, r5		/* r5 = data */
-	st.q	r4, 0, r5
-	or	ZERO, ZERO, r2
-
-___get_user_asm_q_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-/*
- * extern long __put_user_asm_?(void *pval, long addr)
- *
- * Inputs:
- * (r2)  kernel pointer to value
- * (r3)  dest address (in User Space)
- *
- * Ouputs:
- * (r2)  -EFAULT (faulting)
- *       0 	 (not faulting)
- */
-	.global	__put_user_asm_b
-__put_user_asm_b:
-	ld.b	r2, 0, r4		/* r4 = data */
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___put_user_asm_b1:
-	st.b	r3, 0, r4
-	or	ZERO, ZERO, r2
-
-___put_user_asm_b_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-
-	.global	__put_user_asm_w
-__put_user_asm_w:
-	ld.w	r2, 0, r4		/* r4 = data */
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___put_user_asm_w1:
-	st.w	r3, 0, r4
-	or	ZERO, ZERO, r2
-
-___put_user_asm_w_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-
-	.global	__put_user_asm_l
-__put_user_asm_l:
-	ld.l	r2, 0, r4		/* r4 = data */
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___put_user_asm_l1:
-	st.l	r3, 0, r4
-	or	ZERO, ZERO, r2
-
-___put_user_asm_l_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-
-	.global	__put_user_asm_q
-__put_user_asm_q:
-	ld.q	r2, 0, r4		/* r4 = data */
-	movi	-(EFAULT), r2		/* r2 = reply, no real fixup */
-
-___put_user_asm_q1:
-	st.q	r3, 0, r4
-	or	ZERO, ZERO, r2
-
-___put_user_asm_q_exit:
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-panic_stash_regs:
-	/* The idea is : when we get an unhandled panic, we dump the registers
-	   to a known memory location, the just sit in a tight loop.
-	   This allows the human to look at the memory region through the GDB
-	   session (assuming the debug module's SHwy initiator isn't locked up
-	   or anything), to hopefully analyze the cause of the panic. */
-
-	/* On entry, former r15 (SP) is in DCR
-	   former r0  is at resvec_saved_area + 0
-	   former r1  is at resvec_saved_area + 8
-	   former tr0 is at resvec_saved_area + 32
-	   DCR is the only register whose value is lost altogether.
-	*/
-
-	movi	0xffffffff80000000, r0 ! phy of dump area
-	ld.q	SP, 0x000, r1	! former r0
-	st.q	r0,  0x000, r1
-	ld.q	SP, 0x008, r1	! former r1
-	st.q	r0,  0x008, r1
-	st.q	r0,  0x010, r2
-	st.q	r0,  0x018, r3
-	st.q	r0,  0x020, r4
-	st.q	r0,  0x028, r5
-	st.q	r0,  0x030, r6
-	st.q	r0,  0x038, r7
-	st.q	r0,  0x040, r8
-	st.q	r0,  0x048, r9
-	st.q	r0,  0x050, r10
-	st.q	r0,  0x058, r11
-	st.q	r0,  0x060, r12
-	st.q	r0,  0x068, r13
-	st.q	r0,  0x070, r14
-	getcon	dcr, r14
-	st.q	r0,  0x078, r14
-	st.q	r0,  0x080, r16
-	st.q	r0,  0x088, r17
-	st.q	r0,  0x090, r18
-	st.q	r0,  0x098, r19
-	st.q	r0,  0x0a0, r20
-	st.q	r0,  0x0a8, r21
-	st.q	r0,  0x0b0, r22
-	st.q	r0,  0x0b8, r23
-	st.q	r0,  0x0c0, r24
-	st.q	r0,  0x0c8, r25
-	st.q	r0,  0x0d0, r26
-	st.q	r0,  0x0d8, r27
-	st.q	r0,  0x0e0, r28
-	st.q	r0,  0x0e8, r29
-	st.q	r0,  0x0f0, r30
-	st.q	r0,  0x0f8, r31
-	st.q	r0,  0x100, r32
-	st.q	r0,  0x108, r33
-	st.q	r0,  0x110, r34
-	st.q	r0,  0x118, r35
-	st.q	r0,  0x120, r36
-	st.q	r0,  0x128, r37
-	st.q	r0,  0x130, r38
-	st.q	r0,  0x138, r39
-	st.q	r0,  0x140, r40
-	st.q	r0,  0x148, r41
-	st.q	r0,  0x150, r42
-	st.q	r0,  0x158, r43
-	st.q	r0,  0x160, r44
-	st.q	r0,  0x168, r45
-	st.q	r0,  0x170, r46
-	st.q	r0,  0x178, r47
-	st.q	r0,  0x180, r48
-	st.q	r0,  0x188, r49
-	st.q	r0,  0x190, r50
-	st.q	r0,  0x198, r51
-	st.q	r0,  0x1a0, r52
-	st.q	r0,  0x1a8, r53
-	st.q	r0,  0x1b0, r54
-	st.q	r0,  0x1b8, r55
-	st.q	r0,  0x1c0, r56
-	st.q	r0,  0x1c8, r57
-	st.q	r0,  0x1d0, r58
-	st.q	r0,  0x1d8, r59
-	st.q	r0,  0x1e0, r60
-	st.q	r0,  0x1e8, r61
-	st.q	r0,  0x1f0, r62
-	st.q	r0,  0x1f8, r63	! bogus, but for consistency's sake...
-
-	ld.q	SP, 0x020, r1  ! former tr0
-	st.q	r0,  0x200, r1
-	gettr	tr1, r1
-	st.q	r0,  0x208, r1
-	gettr	tr2, r1
-	st.q	r0,  0x210, r1
-	gettr	tr3, r1
-	st.q	r0,  0x218, r1
-	gettr	tr4, r1
-	st.q	r0,  0x220, r1
-	gettr	tr5, r1
-	st.q	r0,  0x228, r1
-	gettr	tr6, r1
-	st.q	r0,  0x230, r1
-	gettr	tr7, r1
-	st.q	r0,  0x238, r1
-
-	getcon	sr,  r1
-	getcon	ssr,  r2
-	getcon	pssr,  r3
-	getcon	spc,  r4
-	getcon	pspc,  r5
-	getcon	intevt,  r6
-	getcon	expevt,  r7
-	getcon	pexpevt,  r8
-	getcon	tra,  r9
-	getcon	tea,  r10
-	getcon	kcr0, r11
-	getcon	kcr1, r12
-	getcon	vbr,  r13
-	getcon	resvec,  r14
-
-	st.q	r0,  0x240, r1
-	st.q	r0,  0x248, r2
-	st.q	r0,  0x250, r3
-	st.q	r0,  0x258, r4
-	st.q	r0,  0x260, r5
-	st.q	r0,  0x268, r6
-	st.q	r0,  0x270, r7
-	st.q	r0,  0x278, r8
-	st.q	r0,  0x280, r9
-	st.q	r0,  0x288, r10
-	st.q	r0,  0x290, r11
-	st.q	r0,  0x298, r12
-	st.q	r0,  0x2a0, r13
-	st.q	r0,  0x2a8, r14
-
-	getcon	SPC,r2
-	getcon	SSR,r3
-	getcon	EXPEVT,r4
-	/* Prepare to jump to C - physical address */
-	movi	panic_handler-CONFIG_CACHED_MEMORY_OFFSET, r1
-	ori	r1, 1, r1
-	ptabs   r1, tr0
-	getcon	DCR, SP
-	blink	tr0, ZERO
-	nop
-	nop
-	nop
-	nop
-
-
-
-
-/*
- * --- Signal Handling Section
- */
-
-/*
- * extern long long _sa_default_rt_restorer
- * extern long long _sa_default_restorer
- *
- *		 or, better,
- *
- * extern void _sa_default_rt_restorer(void)
- * extern void _sa_default_restorer(void)
- *
- * Code prototypes to do a sys_rt_sigreturn() or sys_sysreturn()
- * from user space. Copied into user space by signal management.
- * Both must be quad aligned and 2 quad long (4 instructions).
- *
- */
-	.balign 8
-	.global sa_default_rt_restorer
-sa_default_rt_restorer:
-	movi	0x10, r9
-	shori	__NR_rt_sigreturn, r9
-	trapa	r9
-	nop
-
-	.balign 8
-	.global sa_default_restorer
-sa_default_restorer:
-	movi	0x10, r9
-	shori	__NR_sigreturn, r9
-	trapa	r9
-	nop
-
-/*
- * --- __ex_table Section
- */
-
-/*
- * User Access Exception Table.
- */
-	.section	__ex_table,  "a"
-
-	.global asm_uaccess_start	/* Just a marker */
-asm_uaccess_start:
-
-	.long	___copy_user1, ___copy_user_exit
-	.long	___copy_user2, ___copy_user_exit
-	.long	___clear_user1, ___clear_user_exit
-	.long	___strncpy_from_user1, ___strncpy_from_user_exit
-	.long	___strnlen_user1, ___strnlen_user_exit
-	.long	___get_user_asm_b1, ___get_user_asm_b_exit
-	.long	___get_user_asm_w1, ___get_user_asm_w_exit
-	.long	___get_user_asm_l1, ___get_user_asm_l_exit
-	.long	___get_user_asm_q1, ___get_user_asm_q_exit
-	.long	___put_user_asm_b1, ___put_user_asm_b_exit
-	.long	___put_user_asm_w1, ___put_user_asm_w_exit
-	.long	___put_user_asm_l1, ___put_user_asm_l_exit
-	.long	___put_user_asm_q1, ___put_user_asm_q_exit
-
-	.global asm_uaccess_end		/* Just a marker */
-asm_uaccess_end:
-
-
-
-
-/*
- * --- .text.init Section
- */
-
-	.section	.text.init, "ax"
-
-/*
- * void trap_init (void)
- *
- */
-	.global	trap_init
-trap_init:
-	addi	SP, -24, SP			/* Room to save r28/r29/r30 */
-	st.q	SP, 0, r28
-	st.q	SP, 8, r29
-	st.q	SP, 16, r30
-
-	/* Set VBR and RESVEC */
-	movi	LVBR_block, r19
-	andi	r19, -4, r19			/* reset MMUOFF + reserved */
-	/* For RESVEC exceptions we force the MMU off, which means we need the
-	   physical address. */
-	movi	LRESVEC_block-CONFIG_CACHED_MEMORY_OFFSET, r20
-	andi	r20, -4, r20			/* reset reserved */
-	ori	r20, 1, r20			/* set MMUOFF */
-	putcon	r19, VBR
-	putcon	r20, RESVEC
-
-	/* Sanity check */
-	movi	LVBR_block_end, r21
-	andi	r21, -4, r21
-	movi	BLOCK_SIZE, r29			/* r29 = expected size */
-	or	r19, ZERO, r30
-	add	r19, r29, r19
-
-	/*
-	 * Ugly, but better loop forever now than crash afterwards.
-	 * We should print a message, but if we touch LVBR or
-	 * LRESVEC blocks we should not be surprised if we get stuck
-	 * in trap_init().
-	 */
-	pta	trap_init_loop, tr1
-	gettr	tr1, r28			/* r28 = trap_init_loop */
-	sub	r21, r30, r30			/* r30 = actual size */
-
-	/*
-	 * VBR/RESVEC handlers overlap by being bigger than
-	 * allowed. Very bad. Just loop forever.
-	 * (r28) panic/loop address
-	 * (r29) expected size
-	 * (r30) actual size
-	 */
-trap_init_loop:
-	bne	r19, r21, tr1
-
-	/* Now that exception vectors are set up reset SR.BL */
-	getcon 	SR, r22
-	movi	SR_UNBLOCK_EXC, r23
-	and	r22, r23, r22
-	putcon	r22, SR
-
-	addi	SP, 24, SP
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-