sh: sh775x/titan fixes for irq header changes.

The following moves the creation of IPR interupts into setup-7750.c
and updates a few other things to make it all work after the "Drop
CPU subtype IRQ headers" commit. It boots and runs fine on my titan
board.

 - adds an ipr_idx to the ipr_data and uses a function in the subtype
   code to calculate the address of the IPR registers

 - adds a function to enable individual interrupt mode for externals
   in the subtype code and calls that from the titan board code
   instead of doing it directly.

 - I changed the shift in the ipr_data to be the actual # of bits to
   shift, instead of the numnber / 4 - made it easier to match with
   the manual.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 70 insertions, 0 deletions

diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
index 50812d57c1c1..bbcb06f18b04 100644
--- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c
+++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c
@@ -2,6 +2,7 @@
  * SH7750/SH7751 Setup
  *
  *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2006  Jamie Lenehan
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -10,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
+#include <linux/io.h>
 #include <asm/sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
@@ -46,3 +48,71 @@ static int __init sh7750_devices_setup(void)
 				    ARRAY_SIZE(sh7750_devices));
 }
 __initcall(sh7750_devices_setup);
+
+static struct ipr_data sh7750_ipr_map[] = {
+	/* IRQ, IPR-idx, shift, priority */
+	{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
+	{ 17, 0, 12, 2 }, /* TMU1 TUNI */
+	{ 18, 0,  4, 2 }, /* TMU2 TUNI */
+	{ 19, 0,  4, 2 }, /* TMU2 TIPCI */
+	{ 27, 1, 12, 2 }, /* WDT ITI */
+	{ 20, 0,  0, 2 }, /* RTC ATI (alarm) */
+	{ 21, 0,  0, 2 }, /* RTC PRI (period) */
+	{ 22, 0,  0, 2 }, /* RTC CUI (carry) */
+	{ 23, 1,  4, 3 }, /* SCI ERI */
+	{ 24, 1,  4, 3 }, /* SCI RXI */
+	{ 25, 1,  4, 3 }, /* SCI TXI */
+	{ 40, 2,  4, 3 }, /* SCIF ERI */
+	{ 41, 2,  4, 3 }, /* SCIF RXI */
+	{ 42, 2,  4, 3 }, /* SCIF BRI */
+	{ 43, 2,  4, 3 }, /* SCIF TXI */
+	{ 34, 2,  8, 7 }, /* DMAC DMTE0 */
+	{ 35, 2,  8, 7 }, /* DMAC DMTE1 */
+	{ 36, 2,  8, 7 }, /* DMAC DMTE2 */
+	{ 37, 2,  8, 7 }, /* DMAC DMTE3 */
+	{ 28, 2,  8, 7 }, /* DMAC DMAE */
+};
+
+static struct ipr_data sh7751_ipr_map[] = {
+	{ 44, 2,  8, 7 }, /* DMAC DMTE4 */
+	{ 45, 2,  8, 7 }, /* DMAC DMTE5 */
+	{ 46, 2,  8, 7 }, /* DMAC DMTE6 */
+	{ 47, 2,  8, 7 }, /* DMAC DMTE7 */
+	/* The following use INTC_INPRI00 for masking, which is a 32-bit
+	   register, not a 16-bit register like the IPRx registers, so it
+	   would need special support */
+	/*{ 72, INTPRI00,  8, ? },*/ /* TMU3 TUNI */
+	/*{ 76, INTPRI00, 12, ? },*/ /* TMU4 TUNI */
+};
+
+static unsigned long ipr_offsets[] = {
+	0xffd00004UL,	/* 0: IPRA */
+	0xffd00008UL,	/* 1: IPRB */
+	0xffd0000cUL,	/* 2: IPRC */
+	0xffd00010UL,	/* 3: IPRD */
+};
+
+/* given the IPR index return the address of the IPR register */
+unsigned int map_ipridx_to_addr(int idx)
+{
+	if (idx >= ARRAY_SIZE(ipr_offsets))
+		return 0;
+	return ipr_offsets[idx];
+}
+
+#define INTC_ICR	0xffd00000UL
+#define INTC_ICR_IRLM   (1<<7)
+
+/* enable individual interrupt mode for external interupts */
+void ipr_irq_enable_irlm(void)
+{
+	ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
+}
+
+void __init init_IRQ_ipr()
+{
+	make_ipr_irq(sh7750_ipr_map, ARRAY_SIZE(sh7750_ipr_map));
+#ifdef CONFIG_CPU_SUBTYPE_SH7751
+	make_ipr_irq(sh7751_ipr_map, ARRAY_SIZE(sh7751_ipr_map));
+#endif
+}