Merge commit 'v2.6.28-rc2' into x86/pci-ioapic-boot-irq-quirks

5 files changed, 0 insertions, 1064 deletions

diff --git a/arch/sh/boards/superh/microdev/Makefile b/arch/sh/boards/superh/microdev/Makefile
deleted file mode 100644
index 1387dd6c85eb..000000000000
--- a/arch/sh/boards/superh/microdev/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the SuperH MicroDev specific parts of the kernel
-#
-
-obj-y	 := setup.o irq.o io.o
-
-obj-$(CONFIG_HEARTBEAT)	+= led.o
-
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/superh/microdev/io.c
deleted file mode 100644
index 9f8a540f7e14..000000000000
--- a/arch/sh/boards/superh/microdev/io.c
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- * linux/arch/sh/boards/superh/microdev/io.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/wait.h>
-#include <asm/io.h>
-#include <asm/microdev.h>
-
-	/*
-	 *	we need to have a 'safe' address to re-direct all I/O requests
-	 *	that we do not explicitly wish to handle. This safe address
-	 *	must have the following properies:
-	 *
-	 *		* writes are ignored (no exception)
-	 *		* reads are benign (no side-effects)
-	 *		* accesses of width 1, 2 and 4-bytes are all valid.
-	 *
-	 *	The Processor Version Register (PVR) has these properties.
-	 */
-#define	PVR	0xff000030	/* Processor Version Register */
-
-
-#define	IO_IDE2_BASE		0x170ul	/* I/O base for SMSC FDC37C93xAPM IDE #2 */
-#define	IO_IDE1_BASE		0x1f0ul	/* I/O base for SMSC FDC37C93xAPM IDE #1 */
-#define IO_ISP1161_BASE		0x290ul /* I/O port for Philips ISP1161x USB chip */
-#define IO_SERIAL2_BASE		0x2f8ul /* I/O base for SMSC FDC37C93xAPM Serial #2 */
-#define	IO_LAN91C111_BASE	0x300ul	/* I/O base for SMSC LAN91C111 Ethernet chip */
-#define	IO_IDE2_MISC		0x376ul	/* I/O misc for SMSC FDC37C93xAPM IDE #2 */
-#define IO_SUPERIO_BASE		0x3f0ul /* I/O base for SMSC FDC37C93xAPM SuperIO chip */
-#define	IO_IDE1_MISC		0x3f6ul	/* I/O misc for SMSC FDC37C93xAPM IDE #1 */
-#define IO_SERIAL1_BASE		0x3f8ul /* I/O base for SMSC FDC37C93xAPM Serial #1 */
-
-#define	IO_ISP1161_EXTENT	0x04ul	/* I/O extent for Philips ISP1161x USB chip */
-#define	IO_LAN91C111_EXTENT	0x10ul	/* I/O extent for SMSC LAN91C111 Ethernet chip */
-#define	IO_SUPERIO_EXTENT	0x02ul	/* I/O extent for SMSC FDC37C93xAPM SuperIO chip */
-#define	IO_IDE_EXTENT		0x08ul	/* I/O extent for IDE Task Register set */
-#define IO_SERIAL_EXTENT	0x10ul
-
-#define	IO_LAN91C111_PHYS	0xa7500000ul	/* Physical address of SMSC LAN91C111 Ethernet chip */
-#define	IO_ISP1161_PHYS		0xa7700000ul	/* Physical address of Philips ISP1161x USB chip */
-#define	IO_SUPERIO_PHYS		0xa7800000ul	/* Physical address of SMSC FDC37C93xAPM SuperIO chip */
-
-/*
- * map I/O ports to memory-mapped addresses
- */
-static unsigned long microdev_isa_port2addr(unsigned long offset)
-{
-	unsigned long result;
-
-	if ((offset >= IO_LAN91C111_BASE) &&
-	    (offset <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
-			/*
-			 *	SMSC LAN91C111 Ethernet chip
-			 */
-		result = IO_LAN91C111_PHYS + offset - IO_LAN91C111_BASE;
-	} else if ((offset >= IO_SUPERIO_BASE) &&
-		   (offset <  IO_SUPERIO_BASE + IO_SUPERIO_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Configuration Registers
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-#if 0
-	} else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
-		   offset == KBD_STATUS_REG) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-#endif
-	} else if (((offset >= IO_IDE1_BASE) &&
-		    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
-		    (offset == IO_IDE1_MISC)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	IDE #1
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if (((offset >= IO_IDE2_BASE) &&
-		    (offset <  IO_IDE2_BASE + IO_IDE_EXTENT)) ||
-		    (offset == IO_IDE2_MISC)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	IDE #2
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_SERIAL1_BASE) &&
-		   (offset <  IO_SERIAL1_BASE + IO_SERIAL_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Serial #1
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_SERIAL2_BASE) &&
-		   (offset <  IO_SERIAL2_BASE + IO_SERIAL_EXTENT)) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	Serial #2
-			 */
-		result = IO_SUPERIO_PHYS + (offset << 1);
-	} else if ((offset >= IO_ISP1161_BASE) &&
-		   (offset < IO_ISP1161_BASE + IO_ISP1161_EXTENT)) {
-			/*
-			 *	Philips USB ISP1161x chip
-			 */
-		result = IO_ISP1161_PHYS + offset - IO_ISP1161_BASE;
-	} else {
-			/*
-			 *	safe default.
-			 */
-		printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
-		       __func__, offset);
-		result = PVR;
-	}
-
-	return result;
-}
-
-#define PORT2ADDR(x) (microdev_isa_port2addr(x))
-
-static inline void delay(void)
-{
-#if defined(CONFIG_PCI)
-	/* System board present, just make a dummy SRAM access.  (CS0 will be
-	   mapped to PCI memory, probably good to avoid it.) */
-	ctrl_inw(0xa6800000);
-#else
-	/* CS0 will be mapped to flash, ROM etc so safe to access it. */
-	ctrl_inw(0xa0000000);
-#endif
-}
-
-unsigned char microdev_inb(unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO)
-		return microdev_pci_inb(port);
-#endif
-	return *(volatile unsigned char*)PORT2ADDR(port);
-}
-
-unsigned short microdev_inw(unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO)
-		return microdev_pci_inw(port);
-#endif
-	return *(volatile unsigned short*)PORT2ADDR(port);
-}
-
-unsigned int microdev_inl(unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO)
-		return microdev_pci_inl(port);
-#endif
-	return *(volatile unsigned int*)PORT2ADDR(port);
-}
-
-void microdev_outw(unsigned short b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO) {
-		microdev_pci_outw(b, port);
-		return;
-	}
-#endif
-	*(volatile unsigned short*)PORT2ADDR(port) = b;
-}
-
-void microdev_outb(unsigned char b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO) {
-		microdev_pci_outb(b, port);
-		return;
-	}
-#endif
-
-	/*
-	 *	There is a board feature with the current SH4-202 MicroDev in
-	 *	that the 2 byte enables (nBE0 and nBE1) are tied together (and
-	 *	to the Chip Select Line (Ethernet_CS)). Due to this connectivity,
-	 *	it is not possible to safely perform 8-bit writes to the
-	 *	Ethernet registers, as 16-bits will be consumed from the Data
-	 *	lines (corrupting the other byte).  Hence, this function is
-	 *	written to implement 16-bit read/modify/write for all byte-wide
-	 *	accesses.
-	 *
-	 *	Note: there is no problem with byte READS (even or odd).
-	 *
-	 *			Sean McGoogan - 16th June 2003.
-	 */
-	if ((port >= IO_LAN91C111_BASE) &&
-	    (port <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
-			/*
-			 * Then are trying to perform a byte-write to the
-			 * LAN91C111.  This needs special care.
-			 */
-		if (port % 2 == 1) {	/* is the port odd ? */
-			/* unset bit-0, i.e. make even */
-			const unsigned long evenPort = port-1;
-			unsigned short word;
-
-			/*
-			 * do a 16-bit read/write to write to 'port',
-			 * preserving even byte.
-			 *
-			 *	Even addresses are bits 0-7
-			 *	Odd  addresses are bits 8-15
-			 */
-			word = microdev_inw(evenPort);
-			word = (word & 0xffu) | (b << 8);
-			microdev_outw(word, evenPort);
-		} else {
-			/* else, we are trying to do an even byte write */
-			unsigned short word;
-
-			/*
-			 * do a 16-bit read/write to write to 'port',
-			 * preserving odd byte.
-			 *
-			 *	Even addresses are bits 0-7
-			 *	Odd  addresses are bits 8-15
-			 */
-			word = microdev_inw(port);
-			word = (word & 0xff00u) | (b);
-			microdev_outw(word, port);
-		}
-	} else {
-		*(volatile unsigned char*)PORT2ADDR(port) = b;
-	}
-}
-
-void microdev_outl(unsigned int b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO) {
-		microdev_pci_outl(b, port);
-		return;
-	}
-#endif
-	*(volatile unsigned int*)PORT2ADDR(port) = b;
-}
-
-unsigned char microdev_inb_p(unsigned long port)
-{
-	unsigned char v = microdev_inb(port);
-	delay();
-	return v;
-}
-
-unsigned short microdev_inw_p(unsigned long port)
-{
-	unsigned short v = microdev_inw(port);
-	delay();
-	return v;
-}
-
-unsigned int microdev_inl_p(unsigned long port)
-{
-	unsigned int v = microdev_inl(port);
-	delay();
-	return v;
-}
-
-void microdev_outb_p(unsigned char b, unsigned long port)
-{
-	microdev_outb(b, port);
-	delay();
-}
-
-void microdev_outw_p(unsigned short b, unsigned long port)
-{
-	microdev_outw(b, port);
-	delay();
-}
-
-void microdev_outl_p(unsigned int b, unsigned long port)
-{
-	microdev_outl(b, port);
-	delay();
-}
-
-void microdev_insb(unsigned long port, void *buffer, unsigned long count)
-{
-	volatile unsigned char *port_addr;
-	unsigned char *buf = buffer;
-
-	port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
-	while (count--)
-		*buf++ = *port_addr;
-}
-
-void microdev_insw(unsigned long port, void *buffer, unsigned long count)
-{
-	volatile unsigned short *port_addr;
-	unsigned short *buf = buffer;
-
-	port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
-	while (count--)
-		*buf++ = *port_addr;
-}
-
-void microdev_insl(unsigned long port, void *buffer, unsigned long count)
-{
-	volatile unsigned long *port_addr;
-	unsigned int *buf = buffer;
-
-	port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
-	while (count--)
-		*buf++ = *port_addr;
-}
-
-void microdev_outsb(unsigned long port, const void *buffer, unsigned long count)
-{
-	volatile unsigned char *port_addr;
-	const unsigned char *buf = buffer;
-
-	port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
-	while (count--)
-		*port_addr = *buf++;
-}
-
-void microdev_outsw(unsigned long port, const void *buffer, unsigned long count)
-{
-	volatile unsigned short *port_addr;
-	const unsigned short *buf = buffer;
-
-	port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
-	while (count--)
-		*port_addr = *buf++;
-}
-
-void microdev_outsl(unsigned long port, const void *buffer, unsigned long count)
-{
-	volatile unsigned long *port_addr;
-	const unsigned int *buf = buffer;
-
-	port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
-	while (count--)
-		*port_addr = *buf++;
-}
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/superh/microdev/irq.c
deleted file mode 100644
index 4d335077a3ff..000000000000
--- a/arch/sh/boards/superh/microdev/irq.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * arch/sh/boards/superh/microdev/irq.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- *
- * SuperH SH4-202 MicroDev board support.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/microdev.h>
-
-#define NUM_EXTERNAL_IRQS 16	/* IRL0 .. IRL15 */
-
-static const struct {
-	unsigned char fpgaIrq;
-	unsigned char mapped;
-	const char *name;
-} fpgaIrqTable[NUM_EXTERNAL_IRQS] = {
-	{ 0,				0,	"unused"   },		/* IRQ #0	IRL=15	0x200  */
-	{ MICRODEV_FPGA_IRQ_KEYBOARD,	1,	"keyboard" },		/* IRQ #1	IRL=14	0x220  */
-	{ MICRODEV_FPGA_IRQ_SERIAL1,	1,	"Serial #1"},		/* IRQ #2	IRL=13	0x240  */
-	{ MICRODEV_FPGA_IRQ_ETHERNET,	1,	"Ethernet" },		/* IRQ #3	IRL=12	0x260  */
-	{ MICRODEV_FPGA_IRQ_SERIAL2,	0,	"Serial #2"},		/* IRQ #4	IRL=11	0x280  */
-	{ 0,				0,	"unused"   },		/* IRQ #5	IRL=10	0x2a0  */
-	{ 0,				0,	"unused"   },		/* IRQ #6	IRL=9	0x2c0  */
-	{ MICRODEV_FPGA_IRQ_USB_HC,	1,	"USB"	   },		/* IRQ #7	IRL=8	0x2e0  */
-	{ MICRODEV_IRQ_PCI_INTA,	1,	"PCI INTA" },		/* IRQ #8	IRL=7	0x300  */
-	{ MICRODEV_IRQ_PCI_INTB,	1,	"PCI INTB" },		/* IRQ #9	IRL=6	0x320  */
-	{ MICRODEV_IRQ_PCI_INTC,	1,	"PCI INTC" },		/* IRQ #10	IRL=5	0x340  */
-	{ MICRODEV_IRQ_PCI_INTD,	1,	"PCI INTD" },		/* IRQ #11	IRL=4	0x360  */
-	{ MICRODEV_FPGA_IRQ_MOUSE,	1,	"mouse"    },		/* IRQ #12	IRL=3	0x380  */
-	{ MICRODEV_FPGA_IRQ_IDE2,	1,	"IDE #2"   },		/* IRQ #13	IRL=2	0x3a0  */
-	{ MICRODEV_FPGA_IRQ_IDE1,	1,	"IDE #1"   },		/* IRQ #14	IRL=1	0x3c0  */
-	{ 0,				0,	"unused"   },		/* IRQ #15	IRL=0	0x3e0  */
-};
-
-#if (MICRODEV_LINUX_IRQ_KEYBOARD != 1)
-#  error Inconsistancy in defining the IRQ# for Keyboard!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_ETHERNET != 3)
-#  error Inconsistancy in defining the IRQ# for Ethernet!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_USB_HC != 7)
-#  error Inconsistancy in defining the IRQ# for USB!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_MOUSE != 12)
-#  error Inconsistancy in defining the IRQ# for PS/2 Mouse!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_IDE2 != 13)
-#  error Inconsistancy in defining the IRQ# for secondary IDE!
-#endif
-
-#if (MICRODEV_LINUX_IRQ_IDE1 != 14)
-#  error Inconsistancy in defining the IRQ# for primary IDE!
-#endif
-
-static void enable_microdev_irq(unsigned int irq);
-static void disable_microdev_irq(unsigned int irq);
-
-	/* shutdown is same as "disable" */
-#define shutdown_microdev_irq disable_microdev_irq
-
-static void mask_and_ack_microdev(unsigned int);
-static void end_microdev_irq(unsigned int irq);
-
-static unsigned int startup_microdev_irq(unsigned int irq)
-{
-	enable_microdev_irq(irq);
-	return 0;		/* never anything pending */
-}
-
-static struct hw_interrupt_type microdev_irq_type = {
-	.typename = "MicroDev-IRQ",
-	.startup = startup_microdev_irq,
-	.shutdown = shutdown_microdev_irq,
-	.enable = enable_microdev_irq,
-	.disable = disable_microdev_irq,
-	.ack = mask_and_ack_microdev,
-	.end = end_microdev_irq
-};
-
-static void disable_microdev_irq(unsigned int irq)
-{
-	unsigned int fpgaIrq;
-
-	if (irq >= NUM_EXTERNAL_IRQS)
-		return;
-	if (!fpgaIrqTable[irq].mapped)
-		return;
-
-	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
-
-	/* disable interrupts on the FPGA INTC register */
-	ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
-}
-
-static void enable_microdev_irq(unsigned int irq)
-{
-	unsigned long priorityReg, priorities, pri;
-	unsigned int fpgaIrq;
-
-	if (unlikely(irq >= NUM_EXTERNAL_IRQS))
-		return;
-	if (unlikely(!fpgaIrqTable[irq].mapped))
-		return;
-
-	pri = 15 - irq;
-
-	fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
-	priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
-
-	/* set priority for the interrupt */
-	priorities = ctrl_inl(priorityReg);
-	priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
-	priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
-	ctrl_outl(priorities, priorityReg);
-
-	/* enable interrupts on the FPGA INTC register */
-	ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
-}
-
-	/* This functions sets the desired irq handler to be a MicroDev type */
-static void __init make_microdev_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &microdev_irq_type;
-	disable_microdev_irq(irq);
-}
-
-static void mask_and_ack_microdev(unsigned int irq)
-{
-	disable_microdev_irq(irq);
-}
-
-static void end_microdev_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_microdev_irq(irq);
-}
-
-extern void __init init_microdev_irq(void)
-{
-	int i;
-
-		/* disable interrupts on the FPGA INTC register */
-	ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG);
-
-	for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
-		make_microdev_irq(i);
-}
-
-extern void microdev_print_fpga_intc_status(void)
-{
-	volatile unsigned int * const intenb = (unsigned int*)MICRODEV_FPGA_INTENB_REG;
-	volatile unsigned int * const intdsb = (unsigned int*)MICRODEV_FPGA_INTDSB_REG;
-	volatile unsigned int * const intpria = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(0);
-	volatile unsigned int * const intprib = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(8);
-	volatile unsigned int * const intpric = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(16);
-	volatile unsigned int * const intprid = (unsigned int*)MICRODEV_FPGA_INTPRI_REG(24);
-	volatile unsigned int * const intsrc = (unsigned int*)MICRODEV_FPGA_INTSRC_REG;
-	volatile unsigned int * const intreq = (unsigned int*)MICRODEV_FPGA_INTREQ_REG;
-
-	printk("-------------------------- microdev_print_fpga_intc_status() ------------------\n");
-	printk("FPGA_INTENB = 0x%08x\n", *intenb);
-	printk("FPGA_INTDSB = 0x%08x\n", *intdsb);
-	printk("FPGA_INTSRC = 0x%08x\n", *intsrc);
-	printk("FPGA_INTREQ = 0x%08x\n", *intreq);
-	printk("FPGA_INTPRI[3..0] = %08x:%08x:%08x:%08x\n", *intprid, *intpric, *intprib, *intpria);
-	printk("-------------------------------------------------------------------------------\n");
-}
-
-
diff --git a/arch/sh/boards/superh/microdev/led.c b/arch/sh/boards/superh/microdev/led.c
deleted file mode 100644
index 36e54b47a752..000000000000
--- a/arch/sh/boards/superh/microdev/led.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * linux/arch/sh/boards/superh/microdev/led.c
- *
- * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
- * Copyright (C) 2003 Richard Curnow (Richard.Curnow@superh.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- */
-
-#include <asm/io.h>
-
-#define LED_REGISTER 0xa6104d20
-
-static void mach_led_d9(int value)
-{
-	unsigned long reg;
-	reg = ctrl_inl(LED_REGISTER);
-	reg &= ~1;
-	reg |= (value & 1);
-	ctrl_outl(reg, LED_REGISTER);
-	return;
-}
-
-static void mach_led_d10(int value)
-{
-	unsigned long reg;
-	reg = ctrl_inl(LED_REGISTER);
-	reg &= ~2;
-	reg |= ((value & 1) << 1);
-	ctrl_outl(reg, LED_REGISTER);
-	return;
-}
-
-
-#ifdef CONFIG_HEARTBEAT
-#include <linux/sched.h>
-
-static unsigned char banner_table[] = {
-	0x11, 0x01, 0x11, 0x01, 0x11, 0x03,
-	0x11, 0x01, 0x11, 0x01, 0x13, 0x03,
-	0x11, 0x01, 0x13, 0x01, 0x13, 0x01, 0x11, 0x03,
-	0x11, 0x03,
-	0x11, 0x01, 0x13, 0x01, 0x11, 0x03,
-	0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x11, 0x07,
-	0x13, 0x01, 0x13, 0x03,
-	0x11, 0x01, 0x11, 0x03,
-	0x13, 0x01, 0x11, 0x01, 0x13, 0x01, 0x11, 0x03,
-	0x11, 0x01, 0x13, 0x01, 0x11, 0x03,
-	0x13, 0x01, 0x13, 0x01, 0x13, 0x03,
-	0x13, 0x01, 0x11, 0x01, 0x11, 0x03,
-	0x11, 0x03,
-	0x11, 0x01, 0x11, 0x01, 0x11, 0x01, 0x13, 0x07,
-	0xff
-};
-
-static void banner(void)
-{
-	static int pos = 0;
-	static int count = 0;
-
-	if (count) {
-		count--;
-	} else {
-		int val = banner_table[pos];
-		if (val == 0xff) {
-			pos = 0;
-			val = banner_table[pos];
-		}
-		pos++;
-		mach_led_d10((val >> 4) & 1);
-		count = 10 * (val & 0xf);
-	}
-}
-
-/* From heartbeat_harp in the stboards directory */
-/* acts like an actual heart beat -- ie thump-thump-pause... */
-void microdev_heartbeat(void)
-{
-	static unsigned cnt = 0, period = 0, dist = 0;
-
-	if (cnt == 0 || cnt == dist)
-		mach_led_d9(1);
-	else if (cnt == 7 || cnt == dist+7)
-		mach_led_d9(0);
-
-	if (++cnt > period) {
-		cnt = 0;
-		/* The hyperbolic function below modifies the heartbeat period
-		 * length in dependency of the current (5min) load. It goes
-		 * through the points f(0)=126, f(1)=86, f(5)=51,
-		 * f(inf)->30. */
-		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
-		dist = period / 4;
-	}
-
-	banner();
-}
-
-#endif
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c
deleted file mode 100644
index fc8cd06d66cf..000000000000
--- a/arch/sh/boards/superh/microdev/setup.c
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- * arch/sh/boards/superh/microdev/setup.c
- *
- * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
- * Copyright (C) 2003, 2004 SuperH, Inc.
- * Copyright (C) 2004, 2005 Paul Mundt
- *
- * SuperH SH4-202 MicroDev board support.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <video/s1d13xxxfb.h>
-#include <asm/microdev.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-extern void microdev_heartbeat(void);
-
-
-/****************************************************************************/
-
-
-	/*
-	 * Setup for the SMSC FDC37C93xAPM
-	 */
-#define SMSC_CONFIG_PORT_ADDR	 (0x3F0)
-#define SMSC_INDEX_PORT_ADDR	 SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR	 (SMSC_INDEX_PORT_ADDR + 1)
-
-#define SMSC_ENTER_CONFIG_KEY	 0x55
-#define SMSC_EXIT_CONFIG_KEY	 0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX 	 0x07	/* Logical Device Number */
-#define SMSC_DEVICE_ID_INDEX	 0x20	/* Device ID */
-#define SMSC_DEVICE_REV_INDEX	 0x21	/* Device Revision */
-#define SMSC_ACTIVATE_INDEX	 0x30	/* Activate */
-#define SMSC_PRIMARY_BASE_INDEX	 0x60	/* Primary Base Address */
-#define SMSC_SECONDARY_BASE_INDEX 0x62	/* Secondary Base Address */
-#define SMSC_PRIMARY_INT_INDEX	 0x70	/* Primary Interrupt Select */
-#define SMSC_SECONDARY_INT_INDEX 0x72	/* Secondary Interrupt Select */
-#define SMSC_HDCS0_INDEX	 0xf0	/* HDCS0 Address Decoder */
-#define SMSC_HDCS1_INDEX	 0xf1	/* HDCS1 Address Decoder */
-
-#define SMSC_IDE1_DEVICE	1	/* IDE #1 logical device */
-#define SMSC_IDE2_DEVICE	2	/* IDE #2 logical device */
-#define SMSC_PARALLEL_DEVICE	3	/* Parallel Port logical device */
-#define SMSC_SERIAL1_DEVICE	4	/* Serial #1 logical device */
-#define SMSC_SERIAL2_DEVICE	5	/* Serial #2 logical device */
-#define SMSC_KEYBOARD_DEVICE	7	/* Keyboard logical device */
-#define SMSC_CONFIG_REGISTERS	8	/* Configuration Registers (Aux I/O) */
-
-#define SMSC_READ_INDEXED(index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_WRITE_INDEXED(val, index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	outb((val),   SMSC_DATA_PORT_ADDR); })
-
-#define	IDE1_PRIMARY_BASE	0x01f0	/* Task File Registe base for IDE #1 */
-#define	IDE1_SECONDARY_BASE	0x03f6	/* Miscellaneous AT registers for IDE #1 */
-#define	IDE2_PRIMARY_BASE	0x0170	/* Task File Registe base for IDE #2 */
-#define	IDE2_SECONDARY_BASE	0x0376	/* Miscellaneous AT registers for IDE #2 */
-
-#define SERIAL1_PRIMARY_BASE	0x03f8
-#define SERIAL2_PRIMARY_BASE	0x02f8
-
-#define	MSB(x)		( (x) >> 8 )
-#define	LSB(x)		( (x) & 0xff )
-
-	/* General-Purpose base address on CPU-board FPGA */
-#define	MICRODEV_FPGA_GP_BASE		0xa6100000ul
-
-	/* assume a Keyboard Controller is present */
-int microdev_kbd_controller_present = 1;
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start		= 0x300,
-		.end		= 0x300 + 0x0001000 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= MICRODEV_LINUX_IRQ_ETHERNET,
-		.end		= MICRODEV_LINUX_IRQ_ETHERNET,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-#ifdef CONFIG_FB_S1D13XXX
-static struct s1d13xxxfb_regval s1d13806_initregs[] = {
-	{ S1DREG_MISC,			0x00 },
-	{ S1DREG_COM_DISP_MODE,		0x00 },
-	{ S1DREG_GPIO_CNF0,		0x00 },
-	{ S1DREG_GPIO_CNF1,		0x00 },
-	{ S1DREG_GPIO_CTL0,		0x00 },
-	{ S1DREG_GPIO_CTL1,		0x00 },
-	{ S1DREG_CLK_CNF,		0x02 },
-	{ S1DREG_LCD_CLK_CNF,		0x01 },
-	{ S1DREG_CRT_CLK_CNF,		0x03 },
-	{ S1DREG_MPLUG_CLK_CNF,		0x03 },
-	{ S1DREG_CPU2MEM_WST_SEL,	0x02 },
-	{ S1DREG_SDRAM_REF_RATE,	0x03 },
-	{ S1DREG_SDRAM_TC0,		0x00 },
-	{ S1DREG_SDRAM_TC1,		0x01 },
-	{ S1DREG_MEM_CNF,		0x80 },
-	{ S1DREG_PANEL_TYPE,		0x25 },
-	{ S1DREG_MOD_RATE,		0x00 },
-	{ S1DREG_LCD_DISP_HWIDTH,	0x63 },
-	{ S1DREG_LCD_NDISP_HPER,	0x1e },
-	{ S1DREG_TFT_FPLINE_START,	0x06 },
-	{ S1DREG_TFT_FPLINE_PWIDTH,	0x03 },
-	{ S1DREG_LCD_DISP_VHEIGHT0,	0x57 },
-	{ S1DREG_LCD_DISP_VHEIGHT1,	0x02 },
-	{ S1DREG_LCD_NDISP_VPER,	0x00 },
-	{ S1DREG_TFT_FPFRAME_START,	0x0a },
-	{ S1DREG_TFT_FPFRAME_PWIDTH,	0x81 },
-	{ S1DREG_LCD_DISP_MODE,		0x03 },
-	{ S1DREG_LCD_MISC,		0x00 },
-	{ S1DREG_LCD_DISP_START0,	0x00 },
-	{ S1DREG_LCD_DISP_START1,	0x00 },
-	{ S1DREG_LCD_DISP_START2,	0x00 },
-	{ S1DREG_LCD_MEM_OFF0,		0x90 },
-	{ S1DREG_LCD_MEM_OFF1,		0x01 },
-	{ S1DREG_LCD_PIX_PAN,		0x00 },
-	{ S1DREG_LCD_DISP_FIFO_HTC,	0x00 },
-	{ S1DREG_LCD_DISP_FIFO_LTC,	0x00 },
-	{ S1DREG_CRT_DISP_HWIDTH,	0x63 },
-	{ S1DREG_CRT_NDISP_HPER,	0x1f },
-	{ S1DREG_CRT_HRTC_START,	0x04 },
-	{ S1DREG_CRT_HRTC_PWIDTH,	0x8f },
-	{ S1DREG_CRT_DISP_VHEIGHT0,	0x57 },
-	{ S1DREG_CRT_DISP_VHEIGHT1,	0x02 },
-	{ S1DREG_CRT_NDISP_VPER,	0x1b },
-	{ S1DREG_CRT_VRTC_START,	0x00 },
-	{ S1DREG_CRT_VRTC_PWIDTH,	0x83 },
-	{ S1DREG_TV_OUT_CTL,		0x10 },
-	{ S1DREG_CRT_DISP_MODE,		0x05 },
-	{ S1DREG_CRT_DISP_START0,	0x00 },
-	{ S1DREG_CRT_DISP_START1,	0x00 },
-	{ S1DREG_CRT_DISP_START2,	0x00 },
-	{ S1DREG_CRT_MEM_OFF0,		0x20 },
-	{ S1DREG_CRT_MEM_OFF1,		0x03 },
-	{ S1DREG_CRT_PIX_PAN,		0x00 },
-	{ S1DREG_CRT_DISP_FIFO_HTC,	0x00 },
-	{ S1DREG_CRT_DISP_FIFO_LTC,	0x00 },
-	{ S1DREG_LCD_CUR_CTL,		0x00 },
-	{ S1DREG_LCD_CUR_START,		0x01 },
-	{ S1DREG_LCD_CUR_XPOS0,		0x00 },
-	{ S1DREG_LCD_CUR_XPOS1,		0x00 },
-	{ S1DREG_LCD_CUR_YPOS0,		0x00 },
-	{ S1DREG_LCD_CUR_YPOS1,		0x00 },
-	{ S1DREG_LCD_CUR_BCTL0,		0x00 },
-	{ S1DREG_LCD_CUR_GCTL0,		0x00 },
-	{ S1DREG_LCD_CUR_RCTL0,		0x00 },
-	{ S1DREG_LCD_CUR_BCTL1,		0x1f },
-	{ S1DREG_LCD_CUR_GCTL1,		0x3f },
-	{ S1DREG_LCD_CUR_RCTL1,		0x1f },
-	{ S1DREG_LCD_CUR_FIFO_HTC,	0x00 },
-	{ S1DREG_CRT_CUR_CTL,		0x00 },
-	{ S1DREG_CRT_CUR_START,		0x01 },
-	{ S1DREG_CRT_CUR_XPOS0,		0x00 },
-	{ S1DREG_CRT_CUR_XPOS1,		0x00 },
-	{ S1DREG_CRT_CUR_YPOS0,		0x00 },
-	{ S1DREG_CRT_CUR_YPOS1,		0x00 },
-	{ S1DREG_CRT_CUR_BCTL0,		0x00 },
-	{ S1DREG_CRT_CUR_GCTL0,		0x00 },
-	{ S1DREG_CRT_CUR_RCTL0,		0x00 },
-	{ S1DREG_CRT_CUR_BCTL1,		0x1f },
-	{ S1DREG_CRT_CUR_GCTL1,		0x3f },
-	{ S1DREG_CRT_CUR_RCTL1,		0x1f },
-	{ S1DREG_CRT_CUR_FIFO_HTC,	0x00 },
-	{ S1DREG_BBLT_CTL0,		0x00 },
-	{ S1DREG_BBLT_CTL1,		0x00 },
-	{ S1DREG_BBLT_CC_EXP,		0x00 },
-	{ S1DREG_BBLT_OP,		0x00 },
-	{ S1DREG_BBLT_SRC_START0,	0x00 },
-	{ S1DREG_BBLT_SRC_START1,	0x00 },
-	{ S1DREG_BBLT_SRC_START2,	0x00 },
-	{ S1DREG_BBLT_DST_START0,	0x00 },
-	{ S1DREG_BBLT_DST_START1,	0x00 },
-	{ S1DREG_BBLT_DST_START2,	0x00 },
-	{ S1DREG_BBLT_MEM_OFF0,		0x00 },
-	{ S1DREG_BBLT_MEM_OFF1,		0x00 },
-	{ S1DREG_BBLT_WIDTH0,		0x00 },
-	{ S1DREG_BBLT_WIDTH1,		0x00 },
-	{ S1DREG_BBLT_HEIGHT0,		0x00 },
-	{ S1DREG_BBLT_HEIGHT1,		0x00 },
-	{ S1DREG_BBLT_BGC0,		0x00 },
-	{ S1DREG_BBLT_BGC1,		0x00 },
-	{ S1DREG_BBLT_FGC0,		0x00 },
-	{ S1DREG_BBLT_FGC1,		0x00 },
-	{ S1DREG_LKUP_MODE,		0x00 },
-	{ S1DREG_LKUP_ADDR,		0x00 },
-	{ S1DREG_PS_CNF,		0x10 },
-	{ S1DREG_PS_STATUS,		0x00 },
-	{ S1DREG_CPU2MEM_WDOGT,		0x00 },
-	{ S1DREG_COM_DISP_MODE,		0x02 },
-};
-
-static struct s1d13xxxfb_pdata s1d13806_platform_data = {
-	.initregs	= s1d13806_initregs,
-	.initregssize	= ARRAY_SIZE(s1d13806_initregs),
-};
-
-static struct resource s1d13806_resources[] = {
-	[0] = {
-		.start		= 0x07200000,
-		.end		= 0x07200000 + 0x00200000 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= 0x07000000,
-		.end		= 0x07000000 + 0x00200000 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device s1d13806_device = {
-	.name		= "s1d13806fb",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(s1d13806_resources),
-	.resource	= s1d13806_resources,
-
-	.dev = {
-		.platform_data	= &s1d13806_platform_data,
-	},
-};
-#endif
-
-static struct platform_device *microdev_devices[] __initdata = {
-	&smc91x_device,
-#ifdef CONFIG_FB_S1D13XXX
-	&s1d13806_device,
-#endif
-};
-
-static int __init microdev_devices_setup(void)
-{
-	return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
-}
-
-/*
- * Setup for the SMSC FDC37C93xAPM
- */
-static int __init smsc_superio_setup(void)
-{
-
-	unsigned char devid, devrev;
-
-		/* Initially the chip is in run state */
-		/* Put it into configuration state */
-	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-		/* Read device ID info */
-	devid  = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
-	devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
-	if ( (devid==0x30) && (devrev==0x01) )
-	{
-  		printk("SMSC FDC37C93xAPM SuperIO device detected\n");
-	}
-	else
-	{		/* not the device identity we expected */
-		printk("Not detected a SMSC FDC37C93xAPM SuperIO device (devid=0x%02x, rev=0x%02x)\n",
-			devid, devrev);
-			/* inform the keyboard driver that we have no keyboard controller */
-		microdev_kbd_controller_present = 0;
-			/* little point in doing anything else in this functon */
-		return 0;
-	}
-
-		/* Select the keyboard device */
-	SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
-
-		/* Select the Serial #1 device */
-	SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the Serial #2 device */
-	SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
-		/* enable the interrupts */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the IDE#1 device */
-	SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
-	SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
-		/* select the interrupt */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the IDE#2 device */
-	SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-		/* enable it */
-	SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-		/* program with port addresses */
-	SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
-	SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
-	SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
-		/* select the interrupt */
-	SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
-
-		/* Select the configuration registers */
-	SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
-		/* enable the appropriate GPIO pins for IDE functionality:
-		 * bit[0]   In/Out		1==input;  0==output
-		 * bit[1]   Polarity		1==invert; 0==no invert
-		 * bit[2]   Int Enb #1		1==Enable Combined IRQ #1; 0==disable
-		 * bit[3:4] Function Select	00==original; 01==Alternate Function #1
-		 */
-	SMSC_WRITE_INDEXED(0x00, 0xc2);	/* GP42 = nIDE1_OE */
-	SMSC_WRITE_INDEXED(0x01, 0xc5);	/* GP45 = IDE1_IRQ */
-	SMSC_WRITE_INDEXED(0x00, 0xc6);	/* GP46 = nIOROP */
-	SMSC_WRITE_INDEXED(0x00, 0xc7);	/* GP47 = nIOWOP */
-	SMSC_WRITE_INDEXED(0x08, 0xe8);	/* GP20 = nIDE2_OE */
-
-		/* Exit the configuration state */
-	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-	return 0;
-}
-
-static void __init microdev_setup(char **cmdline_p)
-{
-	int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
-	const int fpgaRevision = *fpgaRevisionRegister;
-	int * const CacheControlRegister = (int*)CCR;
-
-	device_initcall(microdev_devices_setup);
-	device_initcall(smsc_superio_setup);
-
-	printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n",
-		get_system_type(), fpgaRevision, *CacheControlRegister);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sh4202_microdev __initmv = {
-	.mv_name		= "SH4-202 MicroDev",
-	.mv_setup		= microdev_setup,
-	.mv_nr_irqs		= 72,		/* QQQ need to check this - use the MACRO */
-
-	.mv_inb			= microdev_inb,
-	.mv_inw			= microdev_inw,
-	.mv_inl			= microdev_inl,
-	.mv_outb		= microdev_outb,
-	.mv_outw		= microdev_outw,
-	.mv_outl		= microdev_outl,
-
-	.mv_inb_p		= microdev_inb_p,
-	.mv_inw_p		= microdev_inw_p,
-	.mv_inl_p		= microdev_inl_p,
-	.mv_outb_p		= microdev_outb_p,
-	.mv_outw_p		= microdev_outw_p,
-	.mv_outl_p		= microdev_outl_p,
-
-	.mv_insb		= microdev_insb,
-	.mv_insw		= microdev_insw,
-	.mv_insl		= microdev_insl,
-	.mv_outsb		= microdev_outsb,
-	.mv_outsw		= microdev_outsw,
-	.mv_outsl		= microdev_outsl,
-
-	.mv_init_irq		= init_microdev_irq,
-
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= microdev_heartbeat,
-#endif
-};