MIPS: Whitespace cleanup.

Having received another series of whitespace patches I decided to do this
once and for all rather than dealing with this kind of patches trickling
in forever.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 files changed, 76 insertions, 76 deletions

diff --git a/arch/mips/sgi-ip22/ip22-eisa.c b/arch/mips/sgi-ip22/ip22-eisa.c
index 4a6057b35b9d..a0a79222ce0b 100644
--- a/arch/mips/sgi-ip22/ip22-eisa.c
+++ b/arch/mips/sgi-ip22/ip22-eisa.c
@@ -2,7 +2,7 @@
  * Basic EISA bus support for the SGI Indigo-2.
  *
  * (C) 2002 Pascal Dameme <netinet@freesurf.fr>
- *      and Marc Zyngier <mzyngier@freesurf.fr>
+ *	and Marc Zyngier <mzyngier@freesurf.fr>
  *
  * This code is released under both the GPL version 2 and BSD
  * licenses.  Either license may be used.
@@ -40,13 +40,13 @@
 
 /* I2 has four EISA slots. */
 #define IP22_EISA_MAX_SLOTS	  4
-#define EISA_MAX_IRQ             16
+#define EISA_MAX_IRQ		 16
 
-#define EIU_MODE_REG     0x0001ffc0
-#define EIU_STAT_REG     0x0001ffc4
-#define EIU_PREMPT_REG   0x0001ffc8
-#define EIU_QUIET_REG    0x0001ffcc
-#define EIU_INTRPT_ACK   0x00010004
+#define EIU_MODE_REG	 0x0001ffc0
+#define EIU_STAT_REG	 0x0001ffc4
+#define EIU_PREMPT_REG	 0x0001ffc8
+#define EIU_QUIET_REG	 0x0001ffcc
+#define EIU_INTRPT_ACK	 0x00010004
 
 static char __init *decode_eisa_sig(unsigned long addr)
 {
diff --git a/arch/mips/sgi-ip22/ip22-gio.c b/arch/mips/sgi-ip22/ip22-gio.c
index f5ebc092aed5..ab0e379dc7e0 100644
--- a/arch/mips/sgi-ip22/ip22-gio.c
+++ b/arch/mips/sgi-ip22/ip22-gio.c
@@ -15,7 +15,7 @@ static struct bus_type gio_bus_type;
 
 static struct {
 	const char *name;
-	__u8       id;
+	__u8	   id;
 } gio_name_table[] = {
 	{ .name = "SGI Impact", .id = 0x10 },
 	{ .name = "Phobos G160", .id = 0x35 },
@@ -376,15 +376,15 @@ static void ip22_check_gio(int slotno, unsigned long addr)
 }
 
 static struct bus_type gio_bus_type = {
-	.name      = "gio",
+	.name	   = "gio",
 	.dev_attrs = gio_dev_attrs,
-	.match     = gio_bus_match,
-	.probe     = gio_device_probe,
-	.remove    = gio_device_remove,
+	.match	   = gio_bus_match,
+	.probe	   = gio_device_probe,
+	.remove	   = gio_device_remove,
 	.suspend   = gio_device_suspend,
-	.resume    = gio_device_resume,
+	.resume	   = gio_device_resume,
 	.shutdown  = gio_device_shutdown,
-	.uevent    = gio_device_uevent,
+	.uevent	   = gio_device_uevent,
 };
 
 static struct resource gio_bus_resource = {
diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c
index 3f2b7633f946..3db64d51798d 100644
--- a/arch/mips/sgi-ip22/ip22-int.c
+++ b/arch/mips/sgi-ip22/ip22-int.c
@@ -1,12 +1,12 @@
 /*
  * ip22-int.c: Routines for generic manipulation of the INT[23] ASIC
- *             found on INDY and Indigo2 workstations.
+ *	       found on INDY and Indigo2 workstations.
  *
  * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997, 1998 Ralf Baechle (ralf@gnu.org)
  * Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu)
- *                    - Indigo2 changes
- *                    - Interrupt handling fixes
+ *		      - Indigo2 changes
+ *		      - Interrupt handling fixes
  * Copyright (C) 2001, 2003 Ladislav Michl (ladis@linux-mips.org)
  */
 #include <linux/types.h>
@@ -195,24 +195,24 @@ extern void indy_8254timer_irq(void);
  * at all) like:
  *
  *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        Local IRQ level zero
- *             3        Local IRQ level one
- *             4        8254 Timer zero
- *             5        8254 Timer one
- *             6        Bus Error
- *             7        R4k timer (what we use)
+ *	--------	------
+ *	       0	Software (ignored)
+ *	       1	Software (ignored)
+ *	       2	Local IRQ level zero
+ *	       3	Local IRQ level one
+ *	       4	8254 Timer zero
+ *	       5	8254 Timer one
+ *	       6	Bus Error
+ *	       7	R4k timer (what we use)
  *
  * We handle the IRQ according to _our_ priority which is:
  *
- * Highest ----     R4k Timer
- *                  Local IRQ zero
- *                  Local IRQ one
- *                  Bus Error
- *                  8254 Timer zero
- * Lowest  ----     8254 Timer one
+ * Highest ----	    R4k Timer
+ *		    Local IRQ zero
+ *		    Local IRQ one
+ *		    Bus Error
+ *		    8254 Timer zero
+ * Lowest  ----	    8254 Timer one
  *
  * then we just return, if multiple IRQs are pending then we will just take
  * another exception, big deal.
diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c
index 75ada8a9713b..7cec0a4e527d 100644
--- a/arch/mips/sgi-ip22/ip22-mc.c
+++ b/arch/mips/sgi-ip22/ip22-mc.c
@@ -121,22 +121,22 @@ void __init sgimc_init(void)
 	 */
 
 	/* Step 0: Make sure we turn off the watchdog in case it's
-	 *         still running (which might be the case after a
-	 *         soft reboot).
+	 *	   still running (which might be the case after a
+	 *	   soft reboot).
 	 */
 	tmp = sgimc->cpuctrl0;
 	tmp &= ~SGIMC_CCTRL0_WDOG;
 	sgimc->cpuctrl0 = tmp;
 
 	/* Step 1: The CPU/GIO error status registers will not latch
-	 *         up a new error status until the register has been
-	 *         cleared by the cpu.  These status registers are
-	 *         cleared by writing any value to them.
+	 *	   up a new error status until the register has been
+	 *	   cleared by the cpu.	These status registers are
+	 *	   cleared by writing any value to them.
 	 */
 	sgimc->cstat = sgimc->gstat = 0;
 
 	/* Step 2: Enable all parity checking in cpu control register
-	 *         zero.
+	 *	   zero.
 	 */
 	/* don't touch parity settings for IP28 */
 	tmp = sgimc->cpuctrl0;
@@ -147,7 +147,7 @@ void __init sgimc_init(void)
 	sgimc->cpuctrl0 = tmp;
 
 	/* Step 3: Setup the MC write buffer depth, this is controlled
-	 *         in cpu control register 1 in the lower 4 bits.
+	 *	   in cpu control register 1 in the lower 4 bits.
 	 */
 	tmp = sgimc->cpuctrl1;
 	tmp &= ~0xf;
@@ -155,26 +155,26 @@ void __init sgimc_init(void)
 	sgimc->cpuctrl1 = tmp;
 
 	/* Step 4: Initialize the RPSS divider register to run as fast
-	 *         as it can correctly operate.  The register is laid
-	 *         out as follows:
+	 *	   as it can correctly operate.	 The register is laid
+	 *	   out as follows:
 	 *
-	 *         ----------------------------------------
-	 *         |  RESERVED  |   INCREMENT   | DIVIDER |
-	 *         ----------------------------------------
-	 *          31        16 15            8 7       0
+	 *	   ----------------------------------------
+	 *	   |  RESERVED	|   INCREMENT	| DIVIDER |
+	 *	   ----------------------------------------
+	 *	    31	      16 15	       8 7	 0
 	 *
-	 *         DIVIDER determines how often a 'tick' happens,
-	 *         INCREMENT determines by how the RPSS increment
-	 *         registers value increases at each 'tick'. Thus,
-	 *         for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101
+	 *	   DIVIDER determines how often a 'tick' happens,
+	 *	   INCREMENT determines by how the RPSS increment
+	 *	   registers value increases at each 'tick'. Thus,
+	 *	   for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101
 	 */
 	sgimc->divider = 0x101;
 
 	/* Step 5: Initialize GIO64 arbitrator configuration register.
 	 *
 	 * NOTE: HPC init code in sgihpc_init() must run before us because
-	 *       we need to know Guiness vs. FullHouse and the board
-	 *       revision on this machine. You have been warned.
+	 *	 we need to know Guiness vs. FullHouse and the board
+	 *	 revision on this machine. You have been warned.
 	 */
 
 	/* First the basic invariants across all GIO64 implementations. */
@@ -187,18 +187,18 @@ void __init sgimc_init(void)
 		if (SGIOC_SYSID_BOARDREV(sgioc->sysid) < 2) {
 			tmp |= SGIMC_GIOPAR_HPC264;	/* 2nd HPC at 64bits */
 			tmp |= SGIMC_GIOPAR_PLINEEXP0;	/* exp0 pipelines */
-			tmp |= SGIMC_GIOPAR_MASTEREXP1;	/* exp1 masters */
+			tmp |= SGIMC_GIOPAR_MASTEREXP1; /* exp1 masters */
 			tmp |= SGIMC_GIOPAR_RTIMEEXP0;	/* exp0 is realtime */
 		} else {
 			tmp |= SGIMC_GIOPAR_HPC264;	/* 2nd HPC 64bits */
 			tmp |= SGIMC_GIOPAR_PLINEEXP0;	/* exp[01] pipelined */
 			tmp |= SGIMC_GIOPAR_PLINEEXP1;
-			tmp |= SGIMC_GIOPAR_MASTEREISA;	/* EISA masters */
+			tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA masters */
 		}
 	} else {
 		/* Guiness specific settings. */
 		tmp |= SGIMC_GIOPAR_EISA64;	/* MC talks to EISA at 64bits */
-		tmp |= SGIMC_GIOPAR_MASTEREISA;	/* EISA bus can act as master */
+		tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA bus can act as master */
 	}
 	sgimc->giopar = tmp;	/* poof */
 
diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c
index 0177566475d4..e077036a676a 100644
--- a/arch/mips/sgi-ip22/ip22-nvram.c
+++ b/arch/mips/sgi-ip22/ip22-nvram.c
@@ -14,11 +14,11 @@
 #define EEPROM_WRITE	0xa000	/* serial memory write */
 #define EEPROM_WRALL	0x8800	/* write all registers */
 #define EEPROM_WDS	0x8000	/* disable all programming */
-#define	EEPROM_PRREAD	0xc000	/* read protect register */
-#define	EEPROM_PREN	0x9800	/* enable protect register mode */
-#define	EEPROM_PRCLEAR	0xffff	/* clear protect register */
-#define	EEPROM_PRWRITE	0xa000	/* write protect register */
-#define	EEPROM_PRDS	0x8000	/* disable protect register, forever */
+#define EEPROM_PRREAD	0xc000	/* read protect register */
+#define EEPROM_PREN	0x9800	/* enable protect register mode */
+#define EEPROM_PRCLEAR	0xffff	/* clear protect register */
+#define EEPROM_PRWRITE	0xa000	/* write protect register */
+#define EEPROM_PRDS	0x8000	/* disable protect register, forever */
 
 #define EEPROM_EPROT	0x01	/* Protect register enable */
 #define EEPROM_CSEL	0x02	/* Chip select */
@@ -27,7 +27,7 @@
 #define EEPROM_DATI	0x10	/* Data in */
 
 /* We need to use these functions early... */
-#define delay()	({						\
+#define delay() ({						\
 	int x;							\
 	for (x=0; x<100000; x++) __asm__ __volatile__(""); })
 
@@ -35,7 +35,7 @@
 	__raw_writel(__raw_readl(ptr) & ~EEPROM_DATO, ptr);	\
 	__raw_writel(__raw_readl(ptr) & ~EEPROM_ECLK, ptr);	\
 	__raw_writel(__raw_readl(ptr) & ~EEPROM_EPROT, ptr);	\
-	delay();		                                \
+	delay();						\
 	__raw_writel(__raw_readl(ptr) | EEPROM_CSEL, ptr);	\
 	__raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
 
@@ -46,7 +46,7 @@
 	__raw_writel(__raw_readl(ptr) | EEPROM_EPROT, ptr);	\
 	__raw_writel(__raw_readl(ptr) | EEPROM_ECLK, ptr); })
 
-#define	BITS_IN_COMMAND	11
+#define BITS_IN_COMMAND 11
 /*
  * clock in the nvram command and the register number. For the
  * national semiconductor nv ram chip the op code is 3 bits and
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index 698904daf901..a14fd32b76bd 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -137,7 +137,7 @@ static int __init sgiseeq_devinit(void)
 
 	eth0_pd.hpc = hpc3c0;
 	eth0_pd.irq = SGI_ENET_IRQ;
-#define EADDR_NVOFS     250
+#define EADDR_NVOFS	250
 	for (i = 0; i < 3; i++) {
 		unsigned short tmp = ip22_nvram_read(EADDR_NVOFS / 2 + i);
 
@@ -155,17 +155,17 @@ static int __init sgiseeq_devinit(void)
 		return 0;
 
 	sgimc->giopar |= SGIMC_GIOPAR_MASTEREXP1 | SGIMC_GIOPAR_EXP164 |
-	                 SGIMC_GIOPAR_HPC264;
+			 SGIMC_GIOPAR_HPC264;
 	hpc3c1->pbus_piocfg[0][0] = 0x3ffff;
 	/* interrupt/config register on Challenge S Mezz board */
 	hpc3c1->pbus_extregs[0][0] = 0x30;
 
 	eth1_pd.hpc = hpc3c1;
 	eth1_pd.irq = SGI_GIO_0_IRQ;
-#define EADDR_NVOFS     250
+#define EADDR_NVOFS	250
 	for (i = 0; i < 3; i++) {
 		unsigned short tmp = ip22_eeprom_read(&hpc3c1->eeprom,
-		                                      EADDR_NVOFS / 2 + i);
+						      EADDR_NVOFS / 2 + i);
 
 		eth1_pd.mac[2 * i]     = tmp >> 8;
 		eth1_pd.mac[2 * i + 1] = tmp & 0xff;
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index 20363d29cb58..063c2dd31e72 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -101,7 +101,7 @@ static void debounce(unsigned long data)
 	del_timer(&debounce_timer);
 	if (sgint->istat1 & SGINT_ISTAT1_PWR) {
 		/* Interrupt still being sent. */
-		debounce_timer.expires = jiffies + (HZ / 20); /* 0.05s  */
+		debounce_timer.expires = jiffies + (HZ / 20); /* 0.05s	*/
 		add_timer(&debounce_timer);
 
 		sgioc->panel = SGIOC_PANEL_POWERON | SGIOC_PANEL_POWERINTR |
@@ -166,7 +166,7 @@ static irqreturn_t panel_int(int irq, void *dev_id)
 }
 
 static int panic_event(struct notifier_block *this, unsigned long event,
-                      void *ptr)
+		      void *ptr)
 {
 	if (machine_state & MACHINE_PANICED)
 		return NOTIFY_DONE;
diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c
index 0626555fd1a3..3f47346608d7 100644
--- a/arch/mips/sgi-ip22/ip28-berr.c
+++ b/arch/mips/sgi-ip22/ip28-berr.c
@@ -136,14 +136,14 @@ static void save_and_clear_buserr(void)
 	hpc3.scsi[1].cbp   = hpc3c0->scsi_chan1.cbptr;
 	hpc3.scsi[1].ndptr = hpc3c0->scsi_chan1.ndptr;
 
-	hpc3.ethrx.addr  = (unsigned long)&hpc3c0->ethregs.rx_cbptr;
-	hpc3.ethrx.ctrl  = hpc3c0->ethregs.rx_ctrl; /* HPC3_ERXCTRL_ACTIVE ? */
-	hpc3.ethrx.cbp   = hpc3c0->ethregs.rx_cbptr;
+	hpc3.ethrx.addr	 = (unsigned long)&hpc3c0->ethregs.rx_cbptr;
+	hpc3.ethrx.ctrl	 = hpc3c0->ethregs.rx_ctrl; /* HPC3_ERXCTRL_ACTIVE ? */
+	hpc3.ethrx.cbp	 = hpc3c0->ethregs.rx_cbptr;
 	hpc3.ethrx.ndptr = hpc3c0->ethregs.rx_ndptr;
 
-	hpc3.ethtx.addr  = (unsigned long)&hpc3c0->ethregs.tx_cbptr;
-	hpc3.ethtx.ctrl  = hpc3c0->ethregs.tx_ctrl; /* HPC3_ETXCTRL_ACTIVE ? */
-	hpc3.ethtx.cbp   = hpc3c0->ethregs.tx_cbptr;
+	hpc3.ethtx.addr	 = (unsigned long)&hpc3c0->ethregs.tx_cbptr;
+	hpc3.ethtx.ctrl	 = hpc3c0->ethregs.tx_ctrl; /* HPC3_ETXCTRL_ACTIVE ? */
+	hpc3.ethtx.cbp	 = hpc3c0->ethregs.tx_cbptr;
 	hpc3.ethtx.ndptr = hpc3c0->ethregs.tx_ndptr;
 
 	for (i = 0; i < 8; ++i) {
@@ -196,11 +196,11 @@ static void print_cache_tags(void)
 			scb | (1 << 12)*i);
 	}
 	i = read_c0_config();
-	scb = i & (1 << 13) ? 7:6;      /* scblksize = 2^[7..6] */
+	scb = i & (1 << 13) ? 7:6;	/* scblksize = 2^[7..6] */
 	scw = ((i >> 16) & 7) + 19 - 1; /* scwaysize = 2^[24..19] / 2 */
 
 	i = ((1 << scw) - 1) & ~((1 << scb) - 1);
-	printk(KERN_ERR "S: 0: %08x %08x, 1: %08x %08x  (PA[%u:%u] %05x)\n",
+	printk(KERN_ERR "S: 0: %08x %08x, 1: %08x %08x	(PA[%u:%u] %05x)\n",
 		cache_tags.tags[0][0].hi, cache_tags.tags[0][0].lo,
 		cache_tags.tags[0][1].hi, cache_tags.tags[0][1].lo,
 		scw-1, scb, i & (unsigned)cache_tags.err_addr);