i386: prepare shared kernel/irq.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 0 insertions, 343 deletions

diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c
deleted file mode 100644
index dd2b97fc00b2..000000000000
--- a/arch/i386/kernel/irq.c
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- *	linux/arch/i386/kernel/irq.c
- *
- *	Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
- *
- * This file contains the lowest level x86-specific interrupt
- * entry, irq-stacks and irq statistics code. All the remaining
- * irq logic is done by the generic kernel/irq/ code and
- * by the x86-specific irq controller code. (e.g. i8259.c and
- * io_apic.c.)
- */
-
-#include <linux/module.h>
-#include <linux/seq_file.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/notifier.h>
-#include <linux/cpu.h>
-#include <linux/delay.h>
-
-#include <asm/apic.h>
-#include <asm/uaccess.h>
-
-DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
-EXPORT_PER_CPU_SYMBOL(irq_stat);
-
-DEFINE_PER_CPU(struct pt_regs *, irq_regs);
-EXPORT_PER_CPU_SYMBOL(irq_regs);
-
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves.
- */
-void ack_bad_irq(unsigned int irq)
-{
-	printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq);
-
-#ifdef CONFIG_X86_LOCAL_APIC
-	/*
-	 * Currently unexpected vectors happen only on SMP and APIC.
-	 * We _must_ ack these because every local APIC has only N
-	 * irq slots per priority level, and a 'hanging, unacked' IRQ
-	 * holds up an irq slot - in excessive cases (when multiple
-	 * unexpected vectors occur) that might lock up the APIC
-	 * completely.
-	 * But only ack when the APIC is enabled -AK
-	 */
-	if (cpu_has_apic)
-		ack_APIC_irq();
-#endif
-}
-
-#ifdef CONFIG_4KSTACKS
-/*
- * per-CPU IRQ handling contexts (thread information and stack)
- */
-union irq_ctx {
-	struct thread_info      tinfo;
-	u32                     stack[THREAD_SIZE/sizeof(u32)];
-};
-
-static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
-static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
-#endif
-
-/*
- * do_IRQ handles all normal device IRQ's (the special
- * SMP cross-CPU interrupts have their own specific
- * handlers).
- */
-fastcall unsigned int do_IRQ(struct pt_regs *regs)
-{	
-	struct pt_regs *old_regs;
-	/* high bit used in ret_from_ code */
-	int irq = ~regs->orig_eax;
-	struct irq_desc *desc = irq_desc + irq;
-#ifdef CONFIG_4KSTACKS
-	union irq_ctx *curctx, *irqctx;
-	u32 *isp;
-#endif
-
-	if (unlikely((unsigned)irq >= NR_IRQS)) {
-		printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
-					__FUNCTION__, irq);
-		BUG();
-	}
-
-	old_regs = set_irq_regs(regs);
-	irq_enter();
-#ifdef CONFIG_DEBUG_STACKOVERFLOW
-	/* Debugging check for stack overflow: is there less than 1KB free? */
-	{
-		long esp;
-
-		__asm__ __volatile__("andl %%esp,%0" :
-					"=r" (esp) : "0" (THREAD_SIZE - 1));
-		if (unlikely(esp < (sizeof(struct thread_info) + STACK_WARN))) {
-			printk("do_IRQ: stack overflow: %ld\n",
-				esp - sizeof(struct thread_info));
-			dump_stack();
-		}
-	}
-#endif
-
-#ifdef CONFIG_4KSTACKS
-
-	curctx = (union irq_ctx *) current_thread_info();
-	irqctx = hardirq_ctx[smp_processor_id()];
-
-	/*
-	 * this is where we switch to the IRQ stack. However, if we are
-	 * already using the IRQ stack (because we interrupted a hardirq
-	 * handler) we can't do that and just have to keep using the
-	 * current stack (which is the irq stack already after all)
-	 */
-	if (curctx != irqctx) {
-		int arg1, arg2, ebx;
-
-		/* build the stack frame on the IRQ stack */
-		isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
-		irqctx->tinfo.task = curctx->tinfo.task;
-		irqctx->tinfo.previous_esp = current_stack_pointer;
-
-		/*
-		 * Copy the softirq bits in preempt_count so that the
-		 * softirq checks work in the hardirq context.
-		 */
-		irqctx->tinfo.preempt_count =
-			(irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
-			(curctx->tinfo.preempt_count & SOFTIRQ_MASK);
-
-		asm volatile(
-			"       xchgl  %%ebx,%%esp      \n"
-			"       call   *%%edi           \n"
-			"       movl   %%ebx,%%esp      \n"
-			: "=a" (arg1), "=d" (arg2), "=b" (ebx)
-			:  "0" (irq),   "1" (desc),  "2" (isp),
-			   "D" (desc->handle_irq)
-			: "memory", "cc"
-		);
-	} else
-#endif
-		desc->handle_irq(irq, desc);
-
-	irq_exit();
-	set_irq_regs(old_regs);
-	return 1;
-}
-
-#ifdef CONFIG_4KSTACKS
-
-static char softirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
-
-static char hardirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
-
-/*
- * allocate per-cpu stacks for hardirq and for softirq processing
- */
-void irq_ctx_init(int cpu)
-{
-	union irq_ctx *irqctx;
-
-	if (hardirq_ctx[cpu])
-		return;
-
-	irqctx = (union irq_ctx*) &hardirq_stack[cpu*THREAD_SIZE];
-	irqctx->tinfo.task              = NULL;
-	irqctx->tinfo.exec_domain       = NULL;
-	irqctx->tinfo.cpu               = cpu;
-	irqctx->tinfo.preempt_count     = HARDIRQ_OFFSET;
-	irqctx->tinfo.addr_limit        = MAKE_MM_SEG(0);
-
-	hardirq_ctx[cpu] = irqctx;
-
-	irqctx = (union irq_ctx*) &softirq_stack[cpu*THREAD_SIZE];
-	irqctx->tinfo.task              = NULL;
-	irqctx->tinfo.exec_domain       = NULL;
-	irqctx->tinfo.cpu               = cpu;
-	irqctx->tinfo.preempt_count     = 0;
-	irqctx->tinfo.addr_limit        = MAKE_MM_SEG(0);
-
-	softirq_ctx[cpu] = irqctx;
-
-	printk("CPU %u irqstacks, hard=%p soft=%p\n",
-		cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
-}
-
-void irq_ctx_exit(int cpu)
-{
-	hardirq_ctx[cpu] = NULL;
-}
-
-extern asmlinkage void __do_softirq(void);
-
-asmlinkage void do_softirq(void)
-{
-	unsigned long flags;
-	struct thread_info *curctx;
-	union irq_ctx *irqctx;
-	u32 *isp;
-
-	if (in_interrupt())
-		return;
-
-	local_irq_save(flags);
-
-	if (local_softirq_pending()) {
-		curctx = current_thread_info();
-		irqctx = softirq_ctx[smp_processor_id()];
-		irqctx->tinfo.task = curctx->task;
-		irqctx->tinfo.previous_esp = current_stack_pointer;
-
-		/* build the stack frame on the softirq stack */
-		isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
-
-		asm volatile(
-			"       xchgl   %%ebx,%%esp     \n"
-			"       call    __do_softirq    \n"
-			"       movl    %%ebx,%%esp     \n"
-			: "=b"(isp)
-			: "0"(isp)
-			: "memory", "cc", "edx", "ecx", "eax"
-		);
-		/*
-		 * Shouldnt happen, we returned above if in_interrupt():
-	 	 */
-		WARN_ON_ONCE(softirq_count());
-	}
-
-	local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(do_softirq);
-#endif
-
-/*
- * Interrupt statistics:
- */
-
-atomic_t irq_err_count;
-
-/*
- * /proc/interrupts printing:
- */
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	int i = *(loff_t *) v, j;
-	struct irqaction * action;
-	unsigned long flags;
-
-	if (i == 0) {
-		seq_printf(p, "           ");
-		for_each_online_cpu(j)
-			seq_printf(p, "CPU%-8d",j);
-		seq_putc(p, '\n');
-	}
-
-	if (i < NR_IRQS) {
-		spin_lock_irqsave(&irq_desc[i].lock, flags);
-		action = irq_desc[i].action;
-		if (!action)
-			goto skip;
-		seq_printf(p, "%3d: ",i);
-#ifndef CONFIG_SMP
-		seq_printf(p, "%10u ", kstat_irqs(i));
-#else
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
-#endif
-		seq_printf(p, " %8s", irq_desc[i].chip->name);
-		seq_printf(p, "-%-8s", irq_desc[i].name);
-		seq_printf(p, "  %s", action->name);
-
-		for (action=action->next; action; action = action->next)
-			seq_printf(p, ", %s", action->name);
-
-		seq_putc(p, '\n');
-skip:
-		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
-		seq_printf(p, "NMI: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ", nmi_count(j));
-		seq_putc(p, '\n');
-#ifdef CONFIG_X86_LOCAL_APIC
-		seq_printf(p, "LOC: ");
-		for_each_online_cpu(j)
-			seq_printf(p, "%10u ",
-				per_cpu(irq_stat,j).apic_timer_irqs);
-		seq_putc(p, '\n');
-#endif
-		seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
-#if defined(CONFIG_X86_IO_APIC)
-		seq_printf(p, "MIS: %10u\n", atomic_read(&irq_mis_count));
-#endif
-	}
-	return 0;
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-#include <mach_apic.h>
-
-void fixup_irqs(cpumask_t map)
-{
-	unsigned int irq;
-	static int warned;
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		cpumask_t mask;
-		if (irq == 2)
-			continue;
-
-		cpus_and(mask, irq_desc[irq].affinity, map);
-		if (any_online_cpu(mask) == NR_CPUS) {
-			printk("Breaking affinity for irq %i\n", irq);
-			mask = map;
-		}
-		if (irq_desc[irq].chip->set_affinity)
-			irq_desc[irq].chip->set_affinity(irq, mask);
-		else if (irq_desc[irq].action && !(warned++))
-			printk("Cannot set affinity for irq %i\n", irq);
-	}
-
-#if 0
-	barrier();
-	/* Ingo Molnar says: "after the IO-APIC masks have been redirected
-	   [note the nop - the interrupt-enable boundary on x86 is two
-	   instructions from sti] - to flush out pending hardirqs and
-	   IPIs. After this point nothing is supposed to reach this CPU." */
-	__asm__ __volatile__("sti; nop; cli");
-	barrier();
-#else
-	/* That doesn't seem sufficient.  Give it 1ms. */
-	local_irq_enable();
-	mdelay(1);
-	local_irq_disable();
-#endif
-}
-#endif
-