Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

5 files changed, 1374 insertions, 0 deletions

diff --git a/arch/i386/kernel/acpi/Makefile b/arch/i386/kernel/acpi/Makefile
new file mode 100644
index 000000000000..ee75cb286cfe
--- /dev/null
+++ b/arch/i386/kernel/acpi/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_ACPI_BOOT)		:= boot.o
+obj-$(CONFIG_X86_IO_APIC)	+= earlyquirk.o
+obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
+
diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c
new file mode 100644
index 000000000000..9ba0b957d11f
--- /dev/null
+++ b/arch/i386/kernel/acpi/boot.c
@@ -0,0 +1,908 @@
+/*
+ *  boot.c - Architecture-Specific Low-Level ACPI Boot Support
+ *
+ *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *  Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/init.h>
+#include <linux/config.h>
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include <asm/pgtable.h>
+#include <asm/io_apic.h>
+#include <asm/apic.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mpspec.h>
+
+#ifdef	CONFIG_X86_64
+
+static inline void  acpi_madt_oem_check(char *oem_id, char *oem_table_id) { }
+extern void __init clustered_apic_check(void);
+static inline int ioapic_setup_disabled(void) { return 0; }
+#include <asm/proto.h>
+
+#else	/* X86 */
+
+#ifdef	CONFIG_X86_LOCAL_APIC
+#include <mach_apic.h>
+#include <mach_mpparse.h>
+#endif	/* CONFIG_X86_LOCAL_APIC */
+
+#endif	/* X86 */
+
+#define BAD_MADT_ENTRY(entry, end) (					    \
+		(!entry) || (unsigned long)entry + sizeof(*entry) > end ||  \
+		((acpi_table_entry_header *)entry)->length != sizeof(*entry))
+
+#define PREFIX			"ACPI: "
+
+#ifdef CONFIG_ACPI_PCI
+int acpi_noirq __initdata;	/* skip ACPI IRQ initialization */
+int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */
+#else
+int acpi_noirq __initdata = 1;
+int acpi_pci_disabled __initdata = 1;
+#endif
+int acpi_ht __initdata = 1;	/* enable HT */
+
+int acpi_lapic;
+int acpi_ioapic;
+int acpi_strict;
+EXPORT_SYMBOL(acpi_strict);
+
+acpi_interrupt_flags acpi_sci_flags __initdata;
+int acpi_sci_override_gsi __initdata;
+int acpi_skip_timer_override __initdata;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
+#endif
+
+#ifndef __HAVE_ARCH_CMPXCHG
+#warning ACPI uses CMPXCHG, i486 and later hardware
+#endif
+
+#define MAX_MADT_ENTRIES	256
+u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] =
+			{ [0 ... MAX_MADT_ENTRIES-1] = 0xff };
+EXPORT_SYMBOL(x86_acpiid_to_apicid);
+
+/* --------------------------------------------------------------------------
+                              Boot-time Configuration
+   -------------------------------------------------------------------------- */
+
+/*
+ * The default interrupt routing model is PIC (8259).  This gets
+ * overriden if IOAPICs are enumerated (below).
+ */
+enum acpi_irq_model_id		acpi_irq_model = ACPI_IRQ_MODEL_PIC;
+
+#ifdef	CONFIG_X86_64
+
+/* rely on all ACPI tables being in the direct mapping */
+char *__acpi_map_table(unsigned long phys_addr, unsigned long size)
+{
+	if (!phys_addr || !size)
+	return NULL;
+
+	if (phys_addr < (end_pfn_map << PAGE_SHIFT))
+		return __va(phys_addr);
+
+	return NULL;
+}
+
+#else
+
+/*
+ * Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
+ * to map the target physical address. The problem is that set_fixmap()
+ * provides a single page, and it is possible that the page is not
+ * sufficient.
+ * By using this area, we can map up to MAX_IO_APICS pages temporarily,
+ * i.e. until the next __va_range() call.
+ *
+ * Important Safety Note:  The fixed I/O APIC page numbers are *subtracted*
+ * from the fixed base.  That's why we start at FIX_IO_APIC_BASE_END and
+ * count idx down while incrementing the phys address.
+ */
+char *__acpi_map_table(unsigned long phys, unsigned long size)
+{
+	unsigned long base, offset, mapped_size;
+	int idx;
+
+	if (phys + size < 8*1024*1024) 
+		return __va(phys); 
+
+	offset = phys & (PAGE_SIZE - 1);
+	mapped_size = PAGE_SIZE - offset;
+	set_fixmap(FIX_ACPI_END, phys);
+	base = fix_to_virt(FIX_ACPI_END);
+
+	/*
+	 * Most cases can be covered by the below.
+	 */
+	idx = FIX_ACPI_END;
+	while (mapped_size < size) {
+		if (--idx < FIX_ACPI_BEGIN)
+			return NULL;	/* cannot handle this */
+		phys += PAGE_SIZE;
+		set_fixmap(idx, phys);
+		mapped_size += PAGE_SIZE;
+	}
+
+	return ((unsigned char *) base + offset);
+}
+#endif
+
+#ifdef CONFIG_PCI_MMCONFIG
+static int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
+{
+	struct acpi_table_mcfg *mcfg;
+
+	if (!phys_addr || !size)
+		return -EINVAL;
+
+	mcfg = (struct acpi_table_mcfg *) __acpi_map_table(phys_addr, size);
+	if (!mcfg) {
+		printk(KERN_WARNING PREFIX "Unable to map MCFG\n");
+		return -ENODEV;
+	}
+
+	if (mcfg->base_reserved) {
+		printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n");
+		return -ENODEV;
+	}
+
+	pci_mmcfg_base_addr = mcfg->base_address;
+
+	return 0;
+}
+#else
+#define	acpi_parse_mcfg NULL
+#endif /* !CONFIG_PCI_MMCONFIG */
+
+#ifdef CONFIG_X86_LOCAL_APIC
+static int __init
+acpi_parse_madt (
+	unsigned long		phys_addr,
+	unsigned long		size)
+{
+	struct acpi_table_madt	*madt = NULL;
+
+	if (!phys_addr || !size)
+		return -EINVAL;
+
+	madt = (struct acpi_table_madt *) __acpi_map_table(phys_addr, size);
+	if (!madt) {
+		printk(KERN_WARNING PREFIX "Unable to map MADT\n");
+		return -ENODEV;
+	}
+
+	if (madt->lapic_address) {
+		acpi_lapic_addr = (u64) madt->lapic_address;
+
+		printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n",
+			madt->lapic_address);
+	}
+
+	acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
+	
+	return 0;
+}
+
+
+static int __init
+acpi_parse_lapic (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_lapic	*processor = NULL;
+
+	processor = (struct acpi_table_lapic*) header;
+
+	if (BAD_MADT_ENTRY(processor, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	/* no utility in registering a disabled processor */
+	if (processor->flags.enabled == 0)
+		return 0;
+
+	x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
+
+	mp_register_lapic (
+		processor->id,					   /* APIC ID */
+		processor->flags.enabled);			  /* Enabled? */
+
+	return 0;
+}
+
+static int __init
+acpi_parse_lapic_addr_ovr (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL;
+
+	lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr*) header;
+
+	if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
+		return -EINVAL;
+
+	acpi_lapic_addr = lapic_addr_ovr->address;
+
+	return 0;
+}
+
+static int __init
+acpi_parse_lapic_nmi (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_lapic_nmi *lapic_nmi = NULL;
+
+	lapic_nmi = (struct acpi_table_lapic_nmi*) header;
+
+	if (BAD_MADT_ENTRY(lapic_nmi, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	if (lapic_nmi->lint != 1)
+		printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n");
+
+	return 0;
+}
+
+
+#endif /*CONFIG_X86_LOCAL_APIC*/
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+
+static int __init
+acpi_parse_ioapic (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_ioapic *ioapic = NULL;
+
+	ioapic = (struct acpi_table_ioapic*) header;
+
+	if (BAD_MADT_ENTRY(ioapic, end))
+		return -EINVAL;
+ 
+	acpi_table_print_madt_entry(header);
+
+	mp_register_ioapic (
+		ioapic->id,
+		ioapic->address,
+		ioapic->global_irq_base);
+ 
+	return 0;
+}
+
+/*
+ * Parse Interrupt Source Override for the ACPI SCI
+ */
+static void
+acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
+{
+	if (trigger == 0)	/* compatible SCI trigger is level */
+		trigger = 3;
+
+	if (polarity == 0)	/* compatible SCI polarity is low */
+		polarity = 3;
+
+	/* Command-line over-ride via acpi_sci= */
+	if (acpi_sci_flags.trigger)
+		trigger = acpi_sci_flags.trigger;
+
+	if (acpi_sci_flags.polarity)
+		polarity = acpi_sci_flags.polarity;
+
+	/*
+ 	 * mp_config_acpi_legacy_irqs() already setup IRQs < 16
+	 * If GSI is < 16, this will update its flags,
+	 * else it will create a new mp_irqs[] entry.
+	 */
+	mp_override_legacy_irq(gsi, polarity, trigger, gsi);
+
+	/*
+	 * stash over-ride to indicate we've been here
+	 * and for later update of acpi_fadt
+	 */
+	acpi_sci_override_gsi = gsi;
+	return;
+}
+
+static int __init
+acpi_parse_int_src_ovr (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_int_src_ovr *intsrc = NULL;
+
+	intsrc = (struct acpi_table_int_src_ovr*) header;
+
+	if (BAD_MADT_ENTRY(intsrc, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	if (intsrc->bus_irq == acpi_fadt.sci_int) {
+		acpi_sci_ioapic_setup(intsrc->global_irq,
+			intsrc->flags.polarity, intsrc->flags.trigger);
+		return 0;
+	}
+
+	if (acpi_skip_timer_override &&
+		intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
+			printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+			return 0;
+	}
+
+	mp_override_legacy_irq (
+		intsrc->bus_irq,
+		intsrc->flags.polarity,
+		intsrc->flags.trigger,
+		intsrc->global_irq);
+
+	return 0;
+}
+
+
+static int __init
+acpi_parse_nmi_src (
+	acpi_table_entry_header *header, const unsigned long end)
+{
+	struct acpi_table_nmi_src *nmi_src = NULL;
+
+	nmi_src = (struct acpi_table_nmi_src*) header;
+
+	if (BAD_MADT_ENTRY(nmi_src, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	/* TBD: Support nimsrc entries? */
+
+	return 0;
+}
+
+#endif /* CONFIG_X86_IO_APIC */
+
+#ifdef	CONFIG_ACPI_BUS
+
+/*
+ * acpi_pic_sci_set_trigger()
+ * 
+ * use ELCR to set PIC-mode trigger type for SCI
+ *
+ * If a PIC-mode SCI is not recognized or gives spurious IRQ7's
+ * it may require Edge Trigger -- use "acpi_sci=edge"
+ *
+ * Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
+ * for the 8259 PIC.  bit[n] = 1 means irq[n] is Level, otherwise Edge.
+ * ECLR1 is IRQ's 0-7 (IRQ 0, 1, 2 must be 0)
+ * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0)
+ */
+
+void __init
+acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
+{
+	unsigned int mask = 1 << irq;
+	unsigned int old, new;
+
+	/* Real old ELCR mask */
+	old = inb(0x4d0) | (inb(0x4d1) << 8);
+
+	/*
+	 * If we use ACPI to set PCI irq's, then we should clear ELCR
+	 * since we will set it correctly as we enable the PCI irq
+	 * routing.
+	 */
+	new = acpi_noirq ? old : 0;
+
+	/*
+	 * Update SCI information in the ELCR, it isn't in the PCI
+	 * routing tables..
+	 */
+	switch (trigger) {
+	case 1:	/* Edge - clear */
+		new &= ~mask;
+		break;
+	case 3: /* Level - set */
+		new |= mask;
+		break;
+	}
+
+	if (old == new)
+		return;
+
+	printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old);
+	outb(new, 0x4d0);
+	outb(new >> 8, 0x4d1);
+}
+
+
+#endif /* CONFIG_ACPI_BUS */
+
+int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
+{
+#ifdef CONFIG_X86_IO_APIC
+	if (use_pci_vector() && !platform_legacy_irq(gsi))
+ 		*irq = IO_APIC_VECTOR(gsi);
+	else
+#endif
+		*irq = gsi;
+	return 0;
+}
+
+unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
+{
+	unsigned int irq;
+	unsigned int plat_gsi = gsi;
+
+#ifdef CONFIG_PCI
+	/*
+	 * Make sure all (legacy) PCI IRQs are set as level-triggered.
+	 */
+	if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
+		extern void eisa_set_level_irq(unsigned int irq);
+
+		if (edge_level == ACPI_LEVEL_SENSITIVE)
+				eisa_set_level_irq(gsi);
+	}
+#endif
+
+#ifdef CONFIG_X86_IO_APIC
+	if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
+		plat_gsi = mp_register_gsi(gsi, edge_level, active_high_low);
+	}
+#endif
+	acpi_gsi_to_irq(plat_gsi, &irq);
+	return irq;
+}
+EXPORT_SYMBOL(acpi_register_gsi);
+
+/*
+ *  ACPI based hotplug support for CPU
+ */
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+int
+acpi_map_lsapic(acpi_handle handle, int *pcpu)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_map_lsapic);
+
+
+int
+acpi_unmap_lsapic(int cpu)
+{
+	/* TBD */
+	return -EINVAL;
+}
+EXPORT_SYMBOL(acpi_unmap_lsapic);
+#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+
+static unsigned long __init
+acpi_scan_rsdp (
+	unsigned long		start,
+	unsigned long		length)
+{
+	unsigned long		offset = 0;
+	unsigned long		sig_len = sizeof("RSD PTR ") - 1;
+
+	/*
+	 * Scan all 16-byte boundaries of the physical memory region for the
+	 * RSDP signature.
+	 */
+	for (offset = 0; offset < length; offset += 16) {
+		if (strncmp((char *) (start + offset), "RSD PTR ", sig_len))
+			continue;
+		return (start + offset);
+	}
+
+	return 0;
+}
+
+static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size)
+{
+	struct acpi_table_sbf *sb;
+
+	if (!phys_addr || !size)
+	return -EINVAL;
+
+	sb = (struct acpi_table_sbf *) __acpi_map_table(phys_addr, size);
+	if (!sb) {
+		printk(KERN_WARNING PREFIX "Unable to map SBF\n");
+		return -ENODEV;
+	}
+
+	sbf_port = sb->sbf_cmos; /* Save CMOS port */
+
+	return 0;
+}
+
+
+#ifdef CONFIG_HPET_TIMER
+
+static int __init acpi_parse_hpet(unsigned long phys, unsigned long size)
+{
+	struct acpi_table_hpet *hpet_tbl;
+
+	if (!phys || !size)
+		return -EINVAL;
+
+	hpet_tbl = (struct acpi_table_hpet *) __acpi_map_table(phys, size);
+	if (!hpet_tbl) {
+		printk(KERN_WARNING PREFIX "Unable to map HPET\n");
+		return -ENODEV;
+	}
+
+	if (hpet_tbl->addr.space_id != ACPI_SPACE_MEM) {
+		printk(KERN_WARNING PREFIX "HPET timers must be located in "
+		       "memory.\n");
+		return -1;
+	}
+
+#ifdef	CONFIG_X86_64
+        vxtime.hpet_address = hpet_tbl->addr.addrl |
+                ((long) hpet_tbl->addr.addrh << 32);
+
+        printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
+               hpet_tbl->id, vxtime.hpet_address);
+#else	/* X86 */
+	{
+		extern unsigned long hpet_address;
+
+		hpet_address = hpet_tbl->addr.addrl;
+		printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
+			hpet_tbl->id, hpet_address);
+	}
+#endif	/* X86 */
+
+	return 0;
+}
+#else
+#define	acpi_parse_hpet	NULL
+#endif
+
+#ifdef CONFIG_X86_PM_TIMER
+extern u32 pmtmr_ioport;
+#endif
+
+static int __init acpi_parse_fadt(unsigned long phys, unsigned long size)
+{
+	struct fadt_descriptor_rev2 *fadt = NULL;
+
+	fadt = (struct fadt_descriptor_rev2*) __acpi_map_table(phys,size);
+	if(!fadt) {
+		printk(KERN_WARNING PREFIX "Unable to map FADT\n");
+		return 0;
+	}
+
+#ifdef	CONFIG_ACPI_INTERPRETER
+	/* initialize sci_int early for INT_SRC_OVR MADT parsing */
+	acpi_fadt.sci_int = fadt->sci_int;
+#endif
+
+#ifdef CONFIG_X86_PM_TIMER
+	/* detect the location of the ACPI PM Timer */
+	if (fadt->revision >= FADT2_REVISION_ID) {
+		/* FADT rev. 2 */
+		if (fadt->xpm_tmr_blk.address_space_id != ACPI_ADR_SPACE_SYSTEM_IO)
+			return 0;
+
+		pmtmr_ioport = fadt->xpm_tmr_blk.address;
+	} else {
+		/* FADT rev. 1 */
+		pmtmr_ioport = fadt->V1_pm_tmr_blk;
+	}
+	if (pmtmr_ioport)
+		printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", pmtmr_ioport);
+#endif
+	return 0;
+}
+
+
+unsigned long __init
+acpi_find_rsdp (void)
+{
+	unsigned long		rsdp_phys = 0;
+
+	if (efi_enabled) {
+		if (efi.acpi20)
+			return __pa(efi.acpi20);
+		else if (efi.acpi)
+			return __pa(efi.acpi);
+	}
+	/*
+	 * Scan memory looking for the RSDP signature. First search EBDA (low
+	 * memory) paragraphs and then search upper memory (E0000-FFFFF).
+	 */
+	rsdp_phys = acpi_scan_rsdp (0, 0x400);
+	if (!rsdp_phys)
+		rsdp_phys = acpi_scan_rsdp (0xE0000, 0xFFFFF);
+
+	return rsdp_phys;
+}
+
+#ifdef	CONFIG_X86_LOCAL_APIC
+/*
+ * Parse LAPIC entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+static int __init
+acpi_parse_madt_lapic_entries(void)
+{
+	int count;
+
+	/* 
+	 * Note that the LAPIC address is obtained from the MADT (32-bit value)
+	 * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
+	 */
+
+	count = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0);
+	if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n");
+		return count;
+	}
+
+	mp_register_lapic_address(acpi_lapic_addr);
+
+	count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic,
+				       MAX_APICS);
+	if (!count) { 
+		printk(KERN_ERR PREFIX "No LAPIC entries present\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return -ENODEV;
+	}
+	else if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+
+	count = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0);
+	if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+	return 0;
+}
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+/*
+ * Parse IOAPIC related entries in MADT
+ * returns 0 on success, < 0 on error
+ */
+static int __init
+acpi_parse_madt_ioapic_entries(void)
+{
+	int count;
+
+	/*
+	 * ACPI interpreter is required to complete interrupt setup,
+	 * so if it is off, don't enumerate the io-apics with ACPI.
+	 * If MPS is present, it will handle them,
+	 * otherwise the system will stay in PIC mode
+	 */
+	if (acpi_disabled || acpi_noirq) {
+		return -ENODEV;
+        }
+
+	/*
+ 	 * if "noapic" boot option, don't look for IO-APICs
+	 */
+	if (skip_ioapic_setup) {
+		printk(KERN_INFO PREFIX "Skipping IOAPIC probe "
+			"due to 'noapic' option.\n");
+		return -ENODEV;
+	}
+
+	count = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, MAX_IO_APICS);
+	if (!count) {
+		printk(KERN_ERR PREFIX "No IOAPIC entries present\n");
+		return -ENODEV;
+	}
+	else if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n");
+		return count;
+	}
+
+	count = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, NR_IRQ_VECTORS);
+	if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+
+	/*
+	 * If BIOS did not supply an INT_SRC_OVR for the SCI
+	 * pretend we got one so we can set the SCI flags.
+	 */
+	if (!acpi_sci_override_gsi)
+		acpi_sci_ioapic_setup(acpi_fadt.sci_int, 0, 0);
+
+	/* Fill in identity legacy mapings where no override */
+	mp_config_acpi_legacy_irqs();
+
+	count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS);
+	if (count < 0) {
+		printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
+		/* TBD: Cleanup to allow fallback to MPS */
+		return count;
+	}
+
+	return 0;
+}
+#else
+static inline int acpi_parse_madt_ioapic_entries(void)
+{
+	return -1;
+}
+#endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */
+
+
+static void __init
+acpi_process_madt(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+	int count, error;
+
+	count = acpi_table_parse(ACPI_APIC, acpi_parse_madt);
+	if (count >= 1) {
+
+		/*
+		 * Parse MADT LAPIC entries
+		 */
+		error = acpi_parse_madt_lapic_entries();
+		if (!error) {
+			acpi_lapic = 1;
+
+			/*
+			 * Parse MADT IO-APIC entries
+			 */
+			error = acpi_parse_madt_ioapic_entries();
+			if (!error) {
+				acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
+				acpi_irq_balance_set(NULL);
+				acpi_ioapic = 1;
+
+				smp_found_config = 1;
+				clustered_apic_check();
+			}
+		}
+		if (error == -EINVAL) {
+			/*
+			 * Dell Precision Workstation 410, 610 come here.
+			 */
+			printk(KERN_ERR PREFIX "Invalid BIOS MADT, disabling ACPI\n");
+			disable_acpi();
+		}
+	}
+#endif
+	return;
+}
+
+/*
+ * acpi_boot_table_init() and acpi_boot_init()
+ *  called from setup_arch(), always.
+ *	1. checksums all tables
+ *	2. enumerates lapics
+ *	3. enumerates io-apics
+ *
+ * acpi_table_init() is separate to allow reading SRAT without
+ * other side effects.
+ *
+ * side effects of acpi_boot_init:
+ *	acpi_lapic = 1 if LAPIC found
+ *	acpi_ioapic = 1 if IOAPIC found
+ *	if (acpi_lapic && acpi_ioapic) smp_found_config = 1;
+ *	if acpi_blacklisted() acpi_disabled = 1;
+ *	acpi_irq_model=...
+ *	...
+ *
+ * return value: (currently ignored)
+ *	0: success
+ *	!0: failure
+ */
+
+int __init
+acpi_boot_table_init(void)
+{
+	int error;
+
+	/*
+	 * If acpi_disabled, bail out
+	 * One exception: acpi=ht continues far enough to enumerate LAPICs
+	 */
+	if (acpi_disabled && !acpi_ht)
+		 return 1;
+
+	/* 
+	 * Initialize the ACPI boot-time table parser.
+	 */
+	error = acpi_table_init();
+	if (error) {
+		disable_acpi();
+		return error;
+	}
+
+#ifdef __i386__
+	check_acpi_pci();
+#endif
+
+	acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
+
+	/*
+	 * blacklist may disable ACPI entirely
+	 */
+	error = acpi_blacklisted();
+	if (error) {
+		extern int acpi_force;
+
+		if (acpi_force) {
+			printk(KERN_WARNING PREFIX "acpi=force override\n");
+		} else {
+			printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
+			disable_acpi();
+			return error;
+		}
+	}
+
+	return 0;
+}
+
+
+int __init acpi_boot_init(void)
+{
+	/*
+	 * If acpi_disabled, bail out
+	 * One exception: acpi=ht continues far enough to enumerate LAPICs
+	 */
+	if (acpi_disabled && !acpi_ht)
+		 return 1;
+
+	acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
+
+	/*
+	 * set sci_int and PM timer address
+	 */
+	acpi_table_parse(ACPI_FADT, acpi_parse_fadt);
+
+	/*
+	 * Process the Multiple APIC Description Table (MADT), if present
+	 */
+	acpi_process_madt();
+
+	acpi_table_parse(ACPI_HPET, acpi_parse_hpet);
+	acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+
+	return 0;
+}
+
diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c
new file mode 100644
index 000000000000..726a5ca4b165
--- /dev/null
+++ b/arch/i386/kernel/acpi/earlyquirk.c
@@ -0,0 +1,51 @@
+/* 
+ * Do early PCI probing for bug detection when the main PCI subsystem is 
+ * not up yet.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <asm/pci-direct.h>
+#include <asm/acpi.h>
+
+static int __init check_bridge(int vendor, int device) 
+{
+	/* According to Nvidia all timer overrides are bogus. Just ignore
+	   them all. */
+	if (vendor == PCI_VENDOR_ID_NVIDIA) { 
+		acpi_skip_timer_override = 1; 		
+	}
+	return 0;
+}
+   
+void __init check_acpi_pci(void) 
+{ 
+	int num,slot,func; 
+
+	/* Assume the machine supports type 1. If not it will 
+	   always read ffffffff and should not have any side effect. */
+
+	/* Poor man's PCI discovery */
+	for (num = 0; num < 32; num++) { 
+		for (slot = 0; slot < 32; slot++) { 
+			for (func = 0; func < 8; func++) { 
+				u32 class;
+				u32 vendor;
+				class = read_pci_config(num,slot,func,
+							PCI_CLASS_REVISION);
+				if (class == 0xffffffff)
+					break; 
+
+				if ((class >> 16) != PCI_CLASS_BRIDGE_PCI)
+					continue; 
+				
+				vendor = read_pci_config(num, slot, func, 
+							 PCI_VENDOR_ID);
+				
+				if (check_bridge(vendor&0xffff, vendor >> 16))
+					return; 
+			} 
+			
+		}
+	}
+}
diff --git a/arch/i386/kernel/acpi/sleep.c b/arch/i386/kernel/acpi/sleep.c
new file mode 100644
index 000000000000..28bb0514bb6e
--- /dev/null
+++ b/arch/i386/kernel/acpi/sleep.c
@@ -0,0 +1,93 @@
+/*
+ * sleep.c - x86-specific ACPI sleep support.
+ *
+ *  Copyright (C) 2001-2003 Patrick Mochel
+ *  Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz>
+ */
+
+#include <linux/acpi.h>
+#include <linux/bootmem.h>
+#include <asm/smp.h>
+#include <asm/tlbflush.h>
+
+/* address in low memory of the wakeup routine. */
+unsigned long acpi_wakeup_address = 0;
+unsigned long acpi_video_flags;
+extern char wakeup_start, wakeup_end;
+
+extern void zap_low_mappings(void);
+
+extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long));
+
+static void init_low_mapping(pgd_t *pgd, int pgd_limit)
+{
+	int pgd_ofs = 0;
+
+	while ((pgd_ofs < pgd_limit) && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) {
+		set_pgd(pgd, *(pgd+USER_PTRS_PER_PGD));
+		pgd_ofs++, pgd++;
+	}
+	flush_tlb_all();
+}
+
+/**
+ * acpi_save_state_mem - save kernel state
+ *
+ * Create an identity mapped page table and copy the wakeup routine to
+ * low memory.
+ */
+int acpi_save_state_mem (void)
+{
+	if (!acpi_wakeup_address)
+		return 1;
+	init_low_mapping(swapper_pg_dir, USER_PTRS_PER_PGD);
+	memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start);
+	acpi_copy_wakeup_routine(acpi_wakeup_address);
+
+	return 0;
+}
+
+/*
+ * acpi_restore_state - undo effects of acpi_save_state_mem
+ */
+void acpi_restore_state_mem (void)
+{
+	zap_low_mappings();
+}
+
+/**
+ * acpi_reserve_bootmem - do _very_ early ACPI initialisation
+ *
+ * We allocate a page from the first 1MB of memory for the wakeup
+ * routine for when we come back from a sleep state. The
+ * runtime allocator allows specification of <16MB pages, but not
+ * <1MB pages.
+ */
+void __init acpi_reserve_bootmem(void)
+{
+	if ((&wakeup_end - &wakeup_start) > PAGE_SIZE) {
+		printk(KERN_ERR "ACPI: Wakeup code way too big, S3 disabled.\n");
+		return;
+	}
+
+	acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE);
+	if (!acpi_wakeup_address)
+		printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n");
+}
+
+static int __init acpi_sleep_setup(char *str)
+{
+	while ((str != NULL) && (*str != '\0')) {
+		if (strncmp(str, "s3_bios", 7) == 0)
+			acpi_video_flags = 1;
+		if (strncmp(str, "s3_mode", 7) == 0)
+			acpi_video_flags |= 2;
+		str = strchr(str, ',');
+		if (str != NULL)
+			str += strspn(str, ", \t");
+	}
+	return 1;
+}
+
+
+__setup("acpi_sleep=", acpi_sleep_setup);
diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S
new file mode 100644
index 000000000000..39d32484f6f5
--- /dev/null
+++ b/arch/i386/kernel/acpi/wakeup.S
@@ -0,0 +1,318 @@
+.text
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+
+#
+# wakeup_code runs in real mode, and at unknown address (determined at run-time).
+# Therefore it must only use relative jumps/calls. 
+#
+# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
+#
+# If physical address of wakeup_code is 0x12345, BIOS should call us with
+# cs = 0x1234, eip = 0x05
+# 
+
+ALIGN
+	.align	4096
+ENTRY(wakeup_start)
+wakeup_code:
+	wakeup_code_start = .
+	.code16
+
+ 	movw	$0xb800, %ax
+	movw	%ax,%fs
+	movw	$0x0e00 + 'L', %fs:(0x10)
+
+	cli
+	cld
+
+	# setup data segment
+	movw	%cs, %ax
+	movw	%ax, %ds					# Make ds:0 point to wakeup_start
+	movw	%ax, %ss
+	mov	$(wakeup_stack - wakeup_code), %sp		# Private stack is needed for ASUS board
+	movw	$0x0e00 + 'S', %fs:(0x12)
+
+	pushl	$0						# Kill any dangerous flags
+	popfl
+
+	movl	real_magic - wakeup_code, %eax
+	cmpl	$0x12345678, %eax
+	jne	bogus_real_magic
+
+	testl	$1, video_flags - wakeup_code
+	jz	1f
+	lcall   $0xc000,$3
+	movw	%cs, %ax
+	movw	%ax, %ds					# Bios might have played with that
+	movw	%ax, %ss
+1:
+
+	testl	$2, video_flags - wakeup_code
+	jz	1f
+	mov	video_mode - wakeup_code, %ax
+	call	mode_set
+1:
+
+	# set up page table
+	movl	$swapper_pg_dir-__PAGE_OFFSET, %eax
+	movl	%eax, %cr3
+
+	testl	$1, real_efer_save_restore - wakeup_code
+	jz	4f
+	# restore efer setting
+	movl	real_save_efer_edx - wakeup_code, %edx
+	movl	real_save_efer_eax - wakeup_code, %eax
+	mov     $0xc0000080, %ecx
+	wrmsr
+4:
+	# make sure %cr4 is set correctly (features, etc)
+	movl	real_save_cr4 - wakeup_code, %eax
+	movl	%eax, %cr4
+	movw	$0xb800, %ax
+	movw	%ax,%fs
+	movw	$0x0e00 + 'i', %fs:(0x12)
+	
+	# need a gdt
+	lgdt	real_save_gdt - wakeup_code
+
+	movl	real_save_cr0 - wakeup_code, %eax
+	movl	%eax, %cr0
+	jmp 1f
+1:
+	movw	$0x0e00 + 'n', %fs:(0x14)
+
+	movl	real_magic - wakeup_code, %eax
+	cmpl	$0x12345678, %eax
+	jne	bogus_real_magic
+
+	ljmpl	$__KERNEL_CS,$wakeup_pmode_return
+
+real_save_gdt:	.word 0
+		.long 0
+real_save_cr0:	.long 0
+real_save_cr3:	.long 0
+real_save_cr4:	.long 0
+real_magic:	.long 0
+video_mode:	.long 0
+video_flags:	.long 0
+real_efer_save_restore:	.long 0
+real_save_efer_edx: 	.long 0
+real_save_efer_eax: 	.long 0
+
+bogus_real_magic:
+	movw	$0x0e00 + 'B', %fs:(0x12)
+	jmp bogus_real_magic
+
+/* This code uses an extended set of video mode numbers. These include:
+ * Aliases for standard modes
+ *	NORMAL_VGA (-1)
+ *	EXTENDED_VGA (-2)
+ *	ASK_VGA (-3)
+ * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
+ * of compatibility when extending the table. These are between 0x00 and 0xff.
+ */
+#define VIDEO_FIRST_MENU 0x0000
+
+/* Standard BIOS video modes (BIOS number + 0x0100) */
+#define VIDEO_FIRST_BIOS 0x0100
+
+/* VESA BIOS video modes (VESA number + 0x0200) */
+#define VIDEO_FIRST_VESA 0x0200
+
+/* Video7 special modes (BIOS number + 0x0900) */
+#define VIDEO_FIRST_V7 0x0900
+
+# Setting of user mode (AX=mode ID) => CF=success
+mode_set:
+	movw	%ax, %bx
+#if 0
+	cmpb	$0xff, %ah
+	jz	setalias
+
+	testb	$VIDEO_RECALC>>8, %ah
+	jnz	_setrec
+
+	cmpb	$VIDEO_FIRST_RESOLUTION>>8, %ah
+	jnc	setres
+	
+	cmpb	$VIDEO_FIRST_SPECIAL>>8, %ah
+	jz	setspc
+
+	cmpb	$VIDEO_FIRST_V7>>8, %ah
+	jz	setv7
+#endif
+	
+	cmpb	$VIDEO_FIRST_VESA>>8, %ah
+	jnc	check_vesa
+#if 0	
+	orb	%ah, %ah
+	jz	setmenu
+#endif
+	
+	decb	%ah
+#	jz	setbios				  Add bios modes later
+
+setbad:	clc
+	ret
+
+check_vesa:
+	subb	$VIDEO_FIRST_VESA>>8, %bh
+	orw	$0x4000, %bx			# Use linear frame buffer
+	movw	$0x4f02, %ax			# VESA BIOS mode set call
+	int	$0x10
+	cmpw	$0x004f, %ax			# AL=4f if implemented
+	jnz	_setbad				# AH=0 if OK
+
+	stc
+	ret
+
+_setbad: jmp setbad
+
+	.code32
+	ALIGN
+
+.org	0x800
+wakeup_stack_begin:	# Stack grows down
+
+.org	0xff0		# Just below end of page
+wakeup_stack:
+ENTRY(wakeup_end)
+	
+.org	0x1000
+
+wakeup_pmode_return:
+	movw	$__KERNEL_DS, %ax
+	movw	%ax, %ss
+	movw	%ax, %ds
+	movw	%ax, %es
+	movw	%ax, %fs
+	movw	%ax, %gs
+	movw	$0x0e00 + 'u', 0xb8016
+
+	# reload the gdt, as we need the full 32 bit address
+	lgdt	saved_gdt
+	lidt	saved_idt
+	lldt	saved_ldt
+	ljmp	$(__KERNEL_CS),$1f
+1:
+	movl	%cr3, %eax
+	movl	%eax, %cr3
+	wbinvd
+
+	# and restore the stack ... but you need gdt for this to work
+	movl	saved_context_esp, %esp
+
+	movl	%cs:saved_magic, %eax
+	cmpl	$0x12345678, %eax
+	jne	bogus_magic
+
+	# jump to place where we left off
+	movl	saved_eip,%eax
+	jmp	*%eax
+
+bogus_magic:
+	movw	$0x0e00 + 'B', 0xb8018
+	jmp	bogus_magic
+
+
+##
+# acpi_copy_wakeup_routine
+#
+# Copy the above routine to low memory.
+#
+# Parameters:
+# %eax:	place to copy wakeup routine to
+#
+# Returned address is location of code in low memory (past data and stack)
+#
+ENTRY(acpi_copy_wakeup_routine)
+
+	sgdt	saved_gdt
+	sidt	saved_idt
+	sldt	saved_ldt
+	str	saved_tss
+
+	movl	nx_enabled, %edx
+	movl	%edx, real_efer_save_restore - wakeup_start (%eax)
+	testl	$1, real_efer_save_restore - wakeup_start (%eax)
+	jz	2f
+	# save efer setting
+	pushl	%eax
+	movl	%eax, %ebx
+	mov     $0xc0000080, %ecx
+	rdmsr
+	movl	%edx, real_save_efer_edx - wakeup_start (%ebx)
+	movl	%eax, real_save_efer_eax - wakeup_start (%ebx)
+	popl	%eax
+2:
+
+	movl    %cr3, %edx
+	movl    %edx, real_save_cr3 - wakeup_start (%eax)
+	movl    %cr4, %edx
+	movl    %edx, real_save_cr4 - wakeup_start (%eax)
+	movl	%cr0, %edx
+	movl	%edx, real_save_cr0 - wakeup_start (%eax)
+	sgdt    real_save_gdt - wakeup_start (%eax)
+
+	movl	saved_videomode, %edx
+	movl	%edx, video_mode - wakeup_start (%eax)
+	movl	acpi_video_flags, %edx
+	movl	%edx, video_flags - wakeup_start (%eax)
+	movl	$0x12345678, real_magic - wakeup_start (%eax)
+	movl	$0x12345678, saved_magic
+	ret
+
+.data
+ALIGN
+ENTRY(saved_magic)	.long	0
+ENTRY(saved_eip)	.long	0
+
+save_registers:
+	leal	4(%esp), %eax
+	movl	%eax, saved_context_esp
+	movl %ebx, saved_context_ebx
+	movl %ebp, saved_context_ebp
+	movl %esi, saved_context_esi
+	movl %edi, saved_context_edi
+	pushfl ; popl saved_context_eflags
+
+	movl $ret_point, saved_eip
+	ret
+
+
+restore_registers:
+	movl saved_context_ebp, %ebp
+	movl saved_context_ebx, %ebx
+	movl saved_context_esi, %esi
+	movl saved_context_edi, %edi
+	pushl saved_context_eflags ; popfl
+	ret	
+
+ENTRY(do_suspend_lowlevel)
+	call	save_processor_state
+	call	save_registers
+	pushl	$3
+	call	acpi_enter_sleep_state
+	addl	$4, %esp
+	ret
+	.p2align 4,,7
+ret_point:
+	call	restore_registers
+	call	restore_processor_state
+	ret
+
+ENTRY(do_suspend_lowlevel_s4bios)
+	call save_processor_state
+	call save_registers
+	call acpi_enter_sleep_state_s4bios
+	ret
+
+ALIGN
+# saved registers
+saved_gdt:	.long	0,0
+saved_idt:	.long	0,0
+saved_ldt:	.long	0
+saved_tss:	.long	0
+