Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1194 insertions, 0 deletions

diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c
new file mode 100644
index 000000000000..ef6865f0b979
--- /dev/null
+++ b/arch/frv/kernel/setup.c
@@ -0,0 +1,1194 @@
+/* setup.c: FRV specific setup
+ *
+ * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ * - Derived from arch/m68k/kernel/setup.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/genhd.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/major.h>
+#include <linux/bootmem.h>
+#include <linux/highmem.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+#include <asm/setup.h>
+#include <asm/serial.h>
+#include <asm/irq.h>
+#include <asm/sections.h>
+#include <asm/pgalloc.h>
+#include <asm/busctl-regs.h>
+#include <asm/serial-regs.h>
+#include <asm/timer-regs.h>
+#include <asm/irc-regs.h>
+#include <asm/spr-regs.h>
+#include <asm/mb-regs.h>
+#include <asm/mb93493-regs.h>
+#include <asm/gdb-stub.h>
+#include <asm/irq-routing.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_BLK_DEV_INITRD
+#include <linux/blk.h>
+#include <asm/pgtable.h>
+#endif
+
+#include "local.h"
+
+#ifdef CONFIG_MB93090_MB00
+static void __init mb93090_display(void);
+#endif
+#ifdef CONFIG_MMU
+static void __init setup_linux_memory(void);
+#else
+static void __init setup_uclinux_memory(void);
+#endif
+
+#ifdef CONFIG_CONSOLE
+extern struct consw *conswitchp;
+#endif
+
+#ifdef CONFIG_MB93090_MB00
+static char __initdata mb93090_banner[] = "FJ/RH FR-V Linux";
+static char __initdata mb93090_version[] = UTS_RELEASE;
+
+int __nongprelbss mb93090_mb00_detected;
+#endif
+
+const char __frv_unknown_system[] = "unknown";
+const char __frv_mb93091_cb10[] = "mb93091-cb10";
+const char __frv_mb93091_cb11[] = "mb93091-cb11";
+const char __frv_mb93091_cb30[] = "mb93091-cb30";
+const char __frv_mb93091_cb41[] = "mb93091-cb41";
+const char __frv_mb93091_cb60[] = "mb93091-cb60";
+const char __frv_mb93091_cb70[] = "mb93091-cb70";
+const char __frv_mb93091_cb451[] = "mb93091-cb451";
+const char __frv_mb93090_mb00[] = "mb93090-mb00";
+
+const char __frv_mb93493[] = "mb93493";
+
+const char __frv_mb93093[] = "mb93093";
+
+static const char *__nongprelbss cpu_series;
+static const char *__nongprelbss cpu_core;
+static const char *__nongprelbss cpu_silicon;
+static const char *__nongprelbss cpu_mmu;
+static const char *__nongprelbss cpu_system;
+static const char *__nongprelbss cpu_board1;
+static const char *__nongprelbss cpu_board2;
+
+static unsigned long __nongprelbss cpu_psr_all;
+static unsigned long __nongprelbss cpu_hsr0_all;
+
+unsigned long __nongprelbss pdm_suspend_mode;
+
+unsigned long __nongprelbss rom_length;
+unsigned long __nongprelbss memory_start;
+unsigned long __nongprelbss memory_end;
+
+unsigned long __nongprelbss dma_coherent_mem_start;
+unsigned long __nongprelbss dma_coherent_mem_end;
+
+unsigned long __initdata __sdram_old_base;
+unsigned long __initdata num_mappedpages;
+
+struct cpuinfo_frv __nongprelbss boot_cpu_data;
+
+char command_line[COMMAND_LINE_SIZE];
+char __initdata redboot_command_line[COMMAND_LINE_SIZE];
+
+#ifdef CONFIG_PM
+#define __pminit
+#define __pminitdata
+#else
+#define __pminit __init
+#define __pminitdata __initdata
+#endif
+
+struct clock_cmode {
+	uint8_t	xbus, sdram, corebus, core, dsu;
+};
+
+#define _frac(N,D) ((N)<<4 | (D))
+#define _x0_16	_frac(1,6)
+#define _x0_25	_frac(1,4)
+#define _x0_33	_frac(1,3)
+#define _x0_375	_frac(3,8)
+#define _x0_5	_frac(1,2)
+#define _x0_66	_frac(2,3)
+#define _x0_75	_frac(3,4)
+#define _x1	_frac(1,1)
+#define _x1_5	_frac(3,2)
+#define _x2	_frac(2,1)
+#define _x3	_frac(3,1)
+#define _x4	_frac(4,1)
+#define _x4_5	_frac(9,2)
+#define _x6	_frac(6,1)
+#define _x8	_frac(8,1)
+#define _x9	_frac(9,1)
+
+int __nongprelbss clock_p0_current;
+int __nongprelbss clock_cm_current;
+int __nongprelbss clock_cmode_current;
+#ifdef CONFIG_PM
+int __nongprelbss clock_cmodes_permitted;
+unsigned long __nongprelbss clock_bits_settable;
+#endif
+
+static struct clock_cmode __pminitdata undef_clock_cmode = { _x1, _x1, _x1, _x1, _x1 };
+
+static struct clock_cmode __pminitdata clock_cmodes_fr401_fr403[16] = {
+	[4]	= {	_x1,	_x1,	_x2,	_x2,	_x0_25	},
+	[5]	= { 	_x1,	_x2,	_x4,	_x4,	_x0_5	},
+	[8]	= { 	_x1,	_x1,	_x1,	_x2,	_x0_25	},
+	[9]	= { 	_x1,	_x2,	_x2,	_x4,	_x0_5	},
+	[11]	= { 	_x1,	_x4,	_x4,	_x8,	_x1	},
+	[12]	= { 	_x1,	_x1,	_x2,	_x4,	_x0_5	},
+	[13]	= { 	_x1,	_x2,	_x4,	_x8,	_x1	},
+};
+
+static struct clock_cmode __pminitdata clock_cmodes_fr405[16] = {
+	[0]	= {	_x1,	_x1,	_x1,	_x1,	_x0_5	},
+	[1]	= {	_x1,	_x1,	_x1,	_x3,	_x0_25	},
+	[2]	= {	_x1,	_x1,	_x2,	_x6,	_x0_5	},
+	[3]	= {	_x1,	_x2,	_x2,	_x6,	_x0_5	},
+	[4]	= {	_x1,	_x1,	_x2,	_x2,	_x0_16	},
+	[8]	= { 	_x1,	_x1,	_x1,	_x2,	_x0_16	},
+	[9]	= { 	_x1,	_x2,	_x2,	_x4,	_x0_33	},
+	[12]	= { 	_x1,	_x1,	_x2,	_x4,	_x0_33	},
+	[14]	= { 	_x1,	_x3,	_x3,	_x9,	_x0_75	},
+	[15]	= { 	_x1,	_x1_5,	_x1_5,	_x4_5,	_x0_375	},
+
+#define CLOCK_CMODES_PERMITTED_FR405 0xd31f
+};
+
+static struct clock_cmode __pminitdata clock_cmodes_fr555[16] = {
+	[0]	= {	_x1,	_x2,	_x2,	_x4,	_x0_33	},
+	[1]	= {	_x1,	_x3,	_x3,	_x6,	_x0_5	},
+	[2]	= {	_x1,	_x2,	_x4,	_x8,	_x0_66	},
+	[3]	= {	_x1,	_x1_5,	_x3,	_x6,	_x0_5	},
+	[4]	= {	_x1,	_x3,	_x3,	_x9,	_x0_75	},
+	[5]	= {	_x1,	_x2,	_x2,	_x6,	_x0_5	},
+	[6]	= {	_x1,	_x1_5,	_x1_5,	_x4_5,	_x0_375	},
+};
+
+static const struct clock_cmode __pminitdata *clock_cmodes;
+static int __pminitdata clock_doubled;
+
+static struct uart_port __initdata __frv_uart0 = {
+	.uartclk		= 0,
+	.membase		= (char *) UART0_BASE,
+	.irq			= IRQ_CPU_UART0,
+	.regshift		= 3,
+	.iotype			= UPIO_MEM,
+	.flags			= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+};
+
+static struct uart_port __initdata __frv_uart1 = {
+	.uartclk		= 0,
+	.membase		= (char *) UART1_BASE,
+	.irq			= IRQ_CPU_UART1,
+	.regshift		= 3,
+	.iotype			= UPIO_MEM,
+	.flags			= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+};
+
+#if 0
+static void __init printk_xampr(unsigned long ampr, unsigned long amlr, char i_d, int n)
+{
+	unsigned long phys, virt, cxn, size;
+
+#ifdef CONFIG_MMU
+	virt = amlr & 0xffffc000;
+	cxn = amlr & 0x3fff;
+#else
+	virt = ampr & 0xffffc000;
+	cxn = 0;
+#endif
+	phys = ampr & xAMPRx_PPFN;
+	size = 1 << (((ampr & xAMPRx_SS) >> 4) + 17);
+
+	printk("%cAMPR%d: va %08lx-%08lx [pa %08lx] %c%c%c%c [cxn:%04lx]\n",
+	       i_d, n,
+	       virt, virt + size - 1,
+	       phys,
+	       ampr & xAMPRx_S  ? 'S' : '-',
+	       ampr & xAMPRx_C  ? 'C' : '-',
+	       ampr & DAMPRx_WP ? 'W' : '-',
+	       ampr & xAMPRx_V  ? 'V' : '-',
+	       cxn
+	       );
+}
+#endif
+
+/*****************************************************************************/
+/*
+ * dump the memory map
+ */
+static void __init dump_memory_map(void)
+{
+
+#if 0
+	/* dump the protection map */
+	printk_xampr(__get_IAMPR(0),  __get_IAMLR(0),  'I', 0);
+	printk_xampr(__get_IAMPR(1),  __get_IAMLR(1),  'I', 1);
+	printk_xampr(__get_IAMPR(2),  __get_IAMLR(2),  'I', 2);
+	printk_xampr(__get_IAMPR(3),  __get_IAMLR(3),  'I', 3);
+	printk_xampr(__get_IAMPR(4),  __get_IAMLR(4),  'I', 4);
+	printk_xampr(__get_IAMPR(5),  __get_IAMLR(5),  'I', 5);
+	printk_xampr(__get_IAMPR(6),  __get_IAMLR(6),  'I', 6);
+	printk_xampr(__get_IAMPR(7),  __get_IAMLR(7),  'I', 7);
+	printk_xampr(__get_IAMPR(8),  __get_IAMLR(8),  'I', 8);
+	printk_xampr(__get_IAMPR(9),  __get_IAMLR(9),  'i', 9);
+	printk_xampr(__get_IAMPR(10), __get_IAMLR(10), 'I', 10);
+	printk_xampr(__get_IAMPR(11), __get_IAMLR(11), 'I', 11);
+	printk_xampr(__get_IAMPR(12), __get_IAMLR(12), 'I', 12);
+	printk_xampr(__get_IAMPR(13), __get_IAMLR(13), 'I', 13);
+	printk_xampr(__get_IAMPR(14), __get_IAMLR(14), 'I', 14);
+	printk_xampr(__get_IAMPR(15), __get_IAMLR(15), 'I', 15);
+
+	printk_xampr(__get_DAMPR(0),  __get_DAMLR(0),  'D', 0);
+	printk_xampr(__get_DAMPR(1),  __get_DAMLR(1),  'D', 1);
+	printk_xampr(__get_DAMPR(2),  __get_DAMLR(2),  'D', 2);
+	printk_xampr(__get_DAMPR(3),  __get_DAMLR(3),  'D', 3);
+	printk_xampr(__get_DAMPR(4),  __get_DAMLR(4),  'D', 4);
+	printk_xampr(__get_DAMPR(5),  __get_DAMLR(5),  'D', 5);
+	printk_xampr(__get_DAMPR(6),  __get_DAMLR(6),  'D', 6);
+	printk_xampr(__get_DAMPR(7),  __get_DAMLR(7),  'D', 7);
+	printk_xampr(__get_DAMPR(8),  __get_DAMLR(8),  'D', 8);
+	printk_xampr(__get_DAMPR(9),  __get_DAMLR(9),  'D', 9);
+	printk_xampr(__get_DAMPR(10), __get_DAMLR(10), 'D', 10);
+	printk_xampr(__get_DAMPR(11), __get_DAMLR(11), 'D', 11);
+	printk_xampr(__get_DAMPR(12), __get_DAMLR(12), 'D', 12);
+	printk_xampr(__get_DAMPR(13), __get_DAMLR(13), 'D', 13);
+	printk_xampr(__get_DAMPR(14), __get_DAMLR(14), 'D', 14);
+	printk_xampr(__get_DAMPR(15), __get_DAMLR(15), 'D', 15);
+#endif
+
+#if 0
+	/* dump the bus controller registers */
+	printk("LGCR: %08lx\n", __get_LGCR());
+	printk("Master: %08lx-%08lx CR=%08lx\n",
+	       __get_LEMBR(), __get_LEMBR() + __get_LEMAM(),
+	       __get_LMAICR());
+
+	int loop;
+	for (loop = 1; loop <= 7; loop++) {
+		unsigned long lcr = __get_LCR(loop), lsbr = __get_LSBR(loop);
+		printk("CS#%d: %08lx-%08lx %c%c%c%c%c%c%c%c%c\n",
+		       loop,
+		       lsbr, lsbr + __get_LSAM(loop),
+		       lcr & 0x80000000 ? 'r' : '-',
+		       lcr & 0x40000000 ? 'w' : '-',
+		       lcr & 0x08000000 ? 'b' : '-',
+		       lcr & 0x04000000 ? 'B' : '-',
+		       lcr & 0x02000000 ? 'C' : '-',
+		       lcr & 0x01000000 ? 'D' : '-',
+		       lcr & 0x00800000 ? 'W' : '-',
+		       lcr & 0x00400000 ? 'R' : '-',
+		       (lcr & 0x00030000) == 0x00000000 ? '4' :
+		       (lcr & 0x00030000) == 0x00010000 ? '2' :
+		       (lcr & 0x00030000) == 0x00020000 ? '1' :
+		       '-'
+		       );
+	}
+#endif
+
+#if 0
+	printk("\n");
+#endif
+} /* end dump_memory_map() */
+
+/*****************************************************************************/
+/*
+ * attempt to detect a VDK motherboard and DAV daughter board on an MB93091 system
+ */
+#ifdef CONFIG_MB93091_VDK
+static void __init detect_mb93091(void)
+{
+#ifdef CONFIG_MB93090_MB00
+	/* Detect CB70 without motherboard */
+	if (!(cpu_system == __frv_mb93091_cb70 && ((*(unsigned short *)0xffc00030) & 0x100))) {
+		cpu_board1 = __frv_mb93090_mb00;
+		mb93090_mb00_detected = 1;
+	}
+#endif
+
+#ifdef CONFIG_FUJITSU_MB93493
+	cpu_board2 = __frv_mb93493;
+#endif
+
+} /* end detect_mb93091() */
+#endif
+
+/*****************************************************************************/
+/*
+ * determine the CPU type and set appropriate parameters
+ *
+ * Family     Series      CPU Core    Silicon    Imple  Vers
+ * ----------------------------------------------------------
+ * FR-V --+-> FR400 --+-> FR401 --+-> MB93401     02     00 [1]
+ *        |           |           |
+ *        |           |           +-> MB93401/A   02     01
+ *        |           |           |
+ *        |           |           +-> MB93403     02     02
+ *        |           |
+ *        |           +-> FR405 ----> MB93405     04     00
+ *        |
+ *        +-> FR450 ----> FR451 ----> MB93451     05     00
+ *        |
+ *        +-> FR500 ----> FR501 --+-> MB93501     01     01 [2]
+ *        |                       |
+ *        |                       +-> MB93501/A   01     02
+ *        |
+ *        +-> FR550 --+-> FR551 ----> MB93555     03     01
+ *
+ *  [1] The MB93401 is an obsolete CPU replaced by the MB93401A
+ *  [2] The MB93501 is an obsolete CPU replaced by the MB93501A
+ *
+ * Imple is PSR(Processor Status Register)[31:28].
+ * Vers is PSR(Processor Status Register)[27:24].
+ *
+ * A "Silicon" consists of CPU core and some on-chip peripherals.
+ */
+static void __init determine_cpu(void)
+{
+	unsigned long hsr0 = __get_HSR(0);
+	unsigned long psr = __get_PSR();
+
+	/* work out what selectable services the CPU supports */
+	__set_PSR(psr | PSR_EM | PSR_EF | PSR_CM | PSR_NEM);
+	cpu_psr_all = __get_PSR();
+	__set_PSR(psr);
+
+	__set_HSR(0, hsr0 | HSR0_GRLE | HSR0_GRHE | HSR0_FRLE | HSR0_FRHE);
+	cpu_hsr0_all = __get_HSR(0);
+	__set_HSR(0, hsr0);
+
+	/* derive other service specs from the CPU type */
+	cpu_series		= "unknown";
+	cpu_core		= "unknown";
+	cpu_silicon		= "unknown";
+	cpu_mmu			= "Prot";
+	cpu_system		= __frv_unknown_system;
+	clock_cmodes		= NULL;
+	clock_doubled		= 0;
+#ifdef CONFIG_PM
+	clock_bits_settable	= CLOCK_BIT_CM_H | CLOCK_BIT_CM_M | CLOCK_BIT_P0;
+#endif
+
+	switch (PSR_IMPLE(psr)) {
+	case PSR_IMPLE_FR401:
+		cpu_series	= "fr400";
+		cpu_core	= "fr401";
+		pdm_suspend_mode = HSR0_PDM_PLL_RUN;
+
+		switch (PSR_VERSION(psr)) {
+		case PSR_VERSION_FR401_MB93401:
+			cpu_silicon	= "mb93401";
+			cpu_system	= __frv_mb93091_cb10;
+			clock_cmodes	= clock_cmodes_fr401_fr403;
+			clock_doubled	= 1;
+			break;
+		case PSR_VERSION_FR401_MB93401A:
+			cpu_silicon	= "mb93401/A";
+			cpu_system	= __frv_mb93091_cb11;
+			clock_cmodes	= clock_cmodes_fr401_fr403;
+			break;
+		case PSR_VERSION_FR401_MB93403:
+			cpu_silicon	= "mb93403";
+#ifndef CONFIG_MB93093_PDK
+			cpu_system	= __frv_mb93091_cb30;
+#else
+			cpu_system	= __frv_mb93093;
+#endif
+			clock_cmodes	= clock_cmodes_fr401_fr403;
+			break;
+		default:
+			break;
+		}
+		break;
+
+	case PSR_IMPLE_FR405:
+		cpu_series	= "fr400";
+		cpu_core	= "fr405";
+		pdm_suspend_mode = HSR0_PDM_PLL_STOP;
+
+		switch (PSR_VERSION(psr)) {
+		case PSR_VERSION_FR405_MB93405:
+			cpu_silicon	= "mb93405";
+			cpu_system	= __frv_mb93091_cb60;
+			clock_cmodes	= clock_cmodes_fr405;
+#ifdef CONFIG_PM
+			clock_bits_settable |= CLOCK_BIT_CMODE;
+			clock_cmodes_permitted = CLOCK_CMODES_PERMITTED_FR405;
+#endif
+
+			/* the FPGA on the CB70 has extra registers
+			 * - it has 0x0046 in the VDK_ID FPGA register at 0x1a0, which is
+			 *   how we tell the difference between it and a CB60
+			 */
+			if (*(volatile unsigned short *) 0xffc001a0 == 0x0046)
+				cpu_system = __frv_mb93091_cb70;
+			break;
+		default:
+			break;
+		}
+		break;
+
+	case PSR_IMPLE_FR451:
+		cpu_series	= "fr450";
+		cpu_core	= "fr451";
+		pdm_suspend_mode = HSR0_PDM_PLL_STOP;
+#ifdef CONFIG_PM
+		clock_bits_settable |= CLOCK_BIT_CMODE;
+		clock_cmodes_permitted = CLOCK_CMODES_PERMITTED_FR405;
+#endif
+		switch (PSR_VERSION(psr)) {
+		case PSR_VERSION_FR451_MB93451:
+			cpu_silicon	= "mb93451";
+			cpu_mmu		= "Prot, SAT, xSAT, DAT";
+			cpu_system	= __frv_mb93091_cb451;
+			clock_cmodes	= clock_cmodes_fr405;
+			break;
+		default:
+			break;
+		}
+		break;
+
+	case PSR_IMPLE_FR501:
+		cpu_series	= "fr500";
+		cpu_core	= "fr501";
+		pdm_suspend_mode = HSR0_PDM_PLL_STOP;
+
+		switch (PSR_VERSION(psr)) {
+		case PSR_VERSION_FR501_MB93501:  cpu_silicon = "mb93501";   break;
+		case PSR_VERSION_FR501_MB93501A: cpu_silicon = "mb93501/A"; break;
+		default:
+			break;
+		}
+		break;
+
+	case PSR_IMPLE_FR551:
+		cpu_series	= "fr550";
+		cpu_core	= "fr551";
+		pdm_suspend_mode = HSR0_PDM_PLL_RUN;
+
+		switch (PSR_VERSION(psr)) {
+		case PSR_VERSION_FR551_MB93555:
+			cpu_silicon	= "mb93555";
+			cpu_mmu		= "Prot, SAT";
+			cpu_system	= __frv_mb93091_cb41;
+			clock_cmodes	= clock_cmodes_fr555;
+			clock_doubled	= 1;
+			break;
+		default:
+			break;
+		}
+		break;
+
+	default:
+		break;
+	}
+
+	printk("- Series:%s CPU:%s Silicon:%s\n",
+	       cpu_series, cpu_core, cpu_silicon);
+
+#ifdef CONFIG_MB93091_VDK
+	detect_mb93091();
+#endif
+
+#if defined(CONFIG_MB93093_PDK) && defined(CONFIG_FUJITSU_MB93493)
+	cpu_board2 = __frv_mb93493;
+#endif
+
+} /* end determine_cpu() */
+
+/*****************************************************************************/
+/*
+ * calculate the bus clock speed
+ */
+void __pminit determine_clocks(int verbose)
+{
+	const struct clock_cmode *mode, *tmode;
+	unsigned long clkc, psr, quot;
+
+	clkc = __get_CLKC();
+	psr = __get_PSR();
+
+	clock_p0_current = !!(clkc & CLKC_P0);
+	clock_cm_current = clkc & CLKC_CM;
+	clock_cmode_current = (clkc & CLKC_CMODE) >> CLKC_CMODE_s;
+
+	if (verbose)
+		printk("psr=%08lx hsr0=%08lx clkc=%08lx\n", psr, __get_HSR(0), clkc);
+
+	/* the CB70 has some alternative ways of setting the clock speed through switches accessed
+	 * through the FPGA.  */
+	if (cpu_system == __frv_mb93091_cb70) {
+		unsigned short clkswr = *(volatile unsigned short *) 0xffc00104UL & 0x1fffUL;
+
+		if (clkswr & 0x1000)
+			__clkin_clock_speed_HZ = 60000000UL;
+		else
+			__clkin_clock_speed_HZ =
+				((clkswr >> 8) & 0xf) * 10000000 +
+				((clkswr >> 4) & 0xf) * 1000000 +
+				((clkswr     ) & 0xf) * 100000;
+	}
+	/* the FR451 is currently fixed at 24MHz */
+	else if (cpu_system == __frv_mb93091_cb451) {
+		//__clkin_clock_speed_HZ = 24000000UL; // CB451-FPGA
+		unsigned short clkswr = *(volatile unsigned short *) 0xffc00104UL & 0x1fffUL;
+
+		if (clkswr & 0x1000)
+			__clkin_clock_speed_HZ = 60000000UL;
+		else
+			__clkin_clock_speed_HZ =
+				((clkswr >> 8) & 0xf) * 10000000 +
+				((clkswr >> 4) & 0xf) * 1000000 +
+				((clkswr     ) & 0xf) * 100000;
+	}
+	/* otherwise determine the clockspeed from VDK or other registers */
+	else {
+		__clkin_clock_speed_HZ = __get_CLKIN();
+	}
+
+	/* look up the appropriate clock relationships table entry */
+	mode = &undef_clock_cmode;
+	if (clock_cmodes) {
+		tmode = &clock_cmodes[(clkc & CLKC_CMODE) >> CLKC_CMODE_s];
+		if (tmode->xbus)
+			mode = tmode;
+	}
+
+#define CLOCK(SRC,RATIO) ((SRC) * (((RATIO) >> 4) & 0x0f) / ((RATIO) & 0x0f))
+
+	if (clock_doubled)
+		__clkin_clock_speed_HZ <<= 1;
+
+	__ext_bus_clock_speed_HZ	= CLOCK(__clkin_clock_speed_HZ, mode->xbus);
+	__sdram_clock_speed_HZ		= CLOCK(__clkin_clock_speed_HZ, mode->sdram);
+	__dsu_clock_speed_HZ		= CLOCK(__clkin_clock_speed_HZ, mode->dsu);
+
+	switch (clkc & CLKC_CM) {
+	case 0: /* High */
+		__core_bus_clock_speed_HZ	= CLOCK(__clkin_clock_speed_HZ, mode->corebus);
+		__core_clock_speed_HZ		= CLOCK(__clkin_clock_speed_HZ, mode->core);
+		break;
+	case 1: /* Medium */
+		__core_bus_clock_speed_HZ	= CLOCK(__clkin_clock_speed_HZ, mode->sdram);
+		__core_clock_speed_HZ		= CLOCK(__clkin_clock_speed_HZ, mode->sdram);
+		break;
+	case 2: /* Low; not supported */
+	case 3: /* UNDEF */
+		printk("Unsupported CLKC CM %ld\n", clkc & CLKC_CM);
+		panic("Bye");
+	}
+
+	__res_bus_clock_speed_HZ = __ext_bus_clock_speed_HZ;
+	if (clkc & CLKC_P0)
+		__res_bus_clock_speed_HZ >>= 1;
+
+	if (verbose) {
+		printk("CLKIN: %lu.%3.3luMHz\n",
+		       __clkin_clock_speed_HZ / 1000000,
+		       (__clkin_clock_speed_HZ / 1000) % 1000);
+
+		printk("CLKS:"
+		       " ext=%luMHz res=%luMHz sdram=%luMHz cbus=%luMHz core=%luMHz dsu=%luMHz\n",
+		       __ext_bus_clock_speed_HZ / 1000000,
+		       __res_bus_clock_speed_HZ / 1000000,
+		       __sdram_clock_speed_HZ / 1000000,
+		       __core_bus_clock_speed_HZ / 1000000,
+		       __core_clock_speed_HZ / 1000000,
+		       __dsu_clock_speed_HZ / 1000000
+		       );
+	}
+
+	/* calculate the number of __delay() loop iterations per sec (2 insn loop) */
+	__delay_loops_MHz = __core_clock_speed_HZ / (1000000 * 2);
+
+	/* set the serial prescaler */
+	__serial_clock_speed_HZ = __res_bus_clock_speed_HZ;
+	quot = 1;
+	while (__serial_clock_speed_HZ / quot / 16 / 65536 > 3000)
+		quot += 1;
+
+	/* double the divisor if P0 is clear, so that if/when P0 is set, it's still achievable
+	 * - we have to be careful - dividing too much can mean we can't get 115200 baud
+	 */
+	if (__serial_clock_speed_HZ > 32000000 && !(clkc & CLKC_P0))
+		quot <<= 1;
+
+	__serial_clock_speed_HZ /= quot;
+	__frv_uart0.uartclk = __serial_clock_speed_HZ;
+	__frv_uart1.uartclk = __serial_clock_speed_HZ;
+
+	if (verbose)
+		printk("      uart=%luMHz\n", __serial_clock_speed_HZ / 1000000 * quot);
+
+	while (!(__get_UART0_LSR() & UART_LSR_TEMT))
+		continue;
+
+	while (!(__get_UART1_LSR() & UART_LSR_TEMT))
+		continue;
+
+	__set_UCPVR(quot);
+	__set_UCPSR(0);
+} /* end determine_clocks() */
+
+/*****************************************************************************/
+/*
+ * reserve some DMA consistent memory
+ */
+#ifdef CONFIG_RESERVE_DMA_COHERENT
+static void __init reserve_dma_coherent(void)
+{
+	unsigned long ampr;
+
+	/* find the first non-kernel memory tile and steal it */
+#define __steal_AMPR(r)						\
+	if (__get_DAMPR(r) & xAMPRx_V) {			\
+		ampr = __get_DAMPR(r);				\
+		__set_DAMPR(r, ampr | xAMPRx_S | xAMPRx_C);	\
+		__set_IAMPR(r, 0);				\
+		goto found;					\
+	}
+
+	__steal_AMPR(1);
+	__steal_AMPR(2);
+	__steal_AMPR(3);
+	__steal_AMPR(4);
+	__steal_AMPR(5);
+	__steal_AMPR(6);
+
+	if (PSR_IMPLE(__get_PSR()) == PSR_IMPLE_FR551) {
+		__steal_AMPR(7);
+		__steal_AMPR(8);
+		__steal_AMPR(9);
+		__steal_AMPR(10);
+		__steal_AMPR(11);
+		__steal_AMPR(12);
+		__steal_AMPR(13);
+		__steal_AMPR(14);
+	}
+
+	/* unable to grant any DMA consistent memory */
+	printk("No DMA consistent memory reserved\n");
+	return;
+
+ found:
+	dma_coherent_mem_start = ampr & xAMPRx_PPFN;
+	ampr &= xAMPRx_SS;
+	ampr >>= 4;
+	ampr = 1 << (ampr - 3 + 20);
+	dma_coherent_mem_end = dma_coherent_mem_start + ampr;
+
+	printk("DMA consistent memory reserved %lx-%lx\n",
+	       dma_coherent_mem_start, dma_coherent_mem_end);
+
+} /* end reserve_dma_coherent() */
+#endif
+
+/*****************************************************************************/
+/*
+ * calibrate the delay loop
+ */
+void __init calibrate_delay(void)
+{
+	loops_per_jiffy = __delay_loops_MHz * (1000000 / HZ);
+
+	printk("Calibrating delay loop... %lu.%02lu BogoMIPS\n",
+	       loops_per_jiffy / (500000 / HZ),
+	       (loops_per_jiffy / (5000 / HZ)) % 100);
+
+} /* end calibrate_delay() */
+
+/*****************************************************************************/
+/*
+ * look through the command line for some things we need to know immediately
+ */
+static void __init parse_cmdline_early(char *cmdline)
+{
+	if (!cmdline)
+		return;
+
+	while (*cmdline) {
+		if (*cmdline == ' ')
+			cmdline++;
+
+		/* "mem=XXX[kKmM]" sets SDRAM size to <mem>, overriding the value we worked
+		 * out from the SDRAM controller mask register
+		 */
+		if (!memcmp(cmdline, "mem=", 4)) {
+			unsigned long long mem_size;
+
+			mem_size = memparse(cmdline + 4, &cmdline);
+			memory_end = memory_start + mem_size;
+		}
+
+		while (*cmdline && *cmdline != ' ')
+			cmdline++;
+	}
+
+} /* end parse_cmdline_early() */
+
+/*****************************************************************************/
+/*
+ *
+ */
+void __init setup_arch(char **cmdline_p)
+{
+#ifdef CONFIG_MMU
+	printk("Linux FR-V port done by Red Hat Inc <dhowells@redhat.com>\n");
+#else
+	printk("uClinux FR-V port done by Red Hat Inc <dhowells@redhat.com>\n");
+#endif
+
+	memcpy(saved_command_line, redboot_command_line, COMMAND_LINE_SIZE);
+
+	determine_cpu();
+	determine_clocks(1);
+
+	/* For printk-directly-beats-on-serial-hardware hack */
+	console_set_baud(115200);
+#ifdef CONFIG_GDBSTUB
+	gdbstub_set_baud(115200);
+#endif
+
+#ifdef CONFIG_RESERVE_DMA_COHERENT
+	reserve_dma_coherent();
+#endif
+	dump_memory_map();
+
+#ifdef CONFIG_MB93090_MB00
+	if (mb93090_mb00_detected)
+		mb93090_display();
+#endif
+
+	/* register those serial ports that are available */
+#ifndef CONFIG_GDBSTUB_UART0
+	__reg(UART0_BASE + UART_IER * 8) = 0;
+	early_serial_setup(&__frv_uart0);
+//	register_serial(&__frv_uart0);
+#endif
+#ifndef CONFIG_GDBSTUB_UART1
+	__reg(UART1_BASE + UART_IER * 8) = 0;
+	early_serial_setup(&__frv_uart1);
+//	register_serial(&__frv_uart1);
+#endif
+
+#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
+	/* we need to initialize the Flashrom device here since we might
+	 * do things with flash early on in the boot
+	 */
+	flash_probe();
+#endif
+
+	/* deal with the command line - RedBoot may have passed one to the kernel */
+	memcpy(command_line, saved_command_line, sizeof(command_line));
+	*cmdline_p = &command_line[0];
+	parse_cmdline_early(command_line);
+
+	/* set up the memory description
+	 * - by now the stack is part of the init task */
+	printk("Memory %08lx-%08lx\n", memory_start, memory_end);
+
+	if (memory_start == memory_end) BUG();
+
+	init_mm.start_code = (unsigned long) &_stext;
+	init_mm.end_code = (unsigned long) &_etext;
+	init_mm.end_data = (unsigned long) &_edata;
+#if 0 /* DAVIDM - don't set brk just incase someone decides to use it */
+	init_mm.brk = (unsigned long) &_end;
+#else
+	init_mm.brk = (unsigned long) 0;
+#endif
+
+#ifdef DEBUG
+	printk("KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x BSS=0x%06x-0x%06x\n",
+	       (int) &_stext, (int) &_etext,
+	       (int) &_sdata, (int) &_edata,
+	       (int) &_sbss, (int) &_ebss);
+#endif
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+        conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+        conswitchp = &dummy_con;
+#endif
+#endif
+
+#ifdef CONFIG_BLK_DEV_BLKMEM
+	ROOT_DEV = MKDEV(BLKMEM_MAJOR,0);
+#endif
+	/*rom_length = (unsigned long)&_flashend - (unsigned long)&_romvec;*/
+
+#ifdef CONFIG_MMU
+	setup_linux_memory();
+#else
+	setup_uclinux_memory();
+#endif
+
+	/* get kmalloc into gear */
+	paging_init();
+
+	/* init DMA */
+	frv_dma_init();
+#ifdef DEBUG
+	printk("Done setup_arch\n");
+#endif
+
+	/* start the decrement timer running */
+//	asm volatile("movgs %0,timerd" :: "r"(10000000));
+//	__set_HSR(0, __get_HSR(0) | HSR0_ETMD);
+
+} /* end setup_arch() */
+
+#if 0
+/*****************************************************************************/
+/*
+ *
+ */
+static int __devinit setup_arch_serial(void)
+{
+	/* register those serial ports that are available */
+#ifndef CONFIG_GDBSTUB_UART0
+	early_serial_setup(&__frv_uart0);
+#endif
+#ifndef CONFIG_GDBSTUB_UART1
+	early_serial_setup(&__frv_uart1);
+#endif
+
+	return 0;
+} /* end setup_arch_serial() */
+
+late_initcall(setup_arch_serial);
+#endif
+
+/*****************************************************************************/
+/*
+ * set up the memory map for normal MMU linux
+ */
+#ifdef CONFIG_MMU
+static void __init setup_linux_memory(void)
+{
+	unsigned long bootmap_size, low_top_pfn, kstart, kend, high_mem;
+
+	kstart	= (unsigned long) &__kernel_image_start - PAGE_OFFSET;
+	kend	= (unsigned long) &__kernel_image_end - PAGE_OFFSET;
+
+	kstart = kstart & PAGE_MASK;
+	kend = (kend + PAGE_SIZE - 1) & PAGE_MASK;
+
+	/* give all the memory to the bootmap allocator,  tell it to put the
+	 * boot mem_map immediately following the kernel image
+	 */
+	bootmap_size = init_bootmem_node(NODE_DATA(0),
+					 kend >> PAGE_SHIFT,		/* map addr */
+					 memory_start >> PAGE_SHIFT,	/* start of RAM */
+					 memory_end >> PAGE_SHIFT	/* end of RAM */
+					 );
+
+	/* pass the memory that the kernel can immediately use over to the bootmem allocator */
+	max_mapnr = num_physpages = (memory_end - memory_start) >> PAGE_SHIFT;
+	low_top_pfn = (KERNEL_LOWMEM_END - KERNEL_LOWMEM_START) >> PAGE_SHIFT;
+	high_mem = 0;
+
+	if (num_physpages > low_top_pfn) {
+#ifdef CONFIG_HIGHMEM
+		high_mem = num_physpages - low_top_pfn;
+#else
+		max_mapnr = num_physpages = low_top_pfn;
+#endif
+	}
+	else {
+		low_top_pfn = num_physpages;
+	}
+
+	min_low_pfn = memory_start >> PAGE_SHIFT;
+	max_low_pfn = low_top_pfn;
+	max_pfn = memory_end >> PAGE_SHIFT;
+
+	num_mappedpages = low_top_pfn;
+
+	printk(KERN_NOTICE "%ldMB LOWMEM available.\n", low_top_pfn >> (20 - PAGE_SHIFT));
+
+	free_bootmem(memory_start, low_top_pfn << PAGE_SHIFT);
+
+#ifdef CONFIG_HIGHMEM
+	if (high_mem)
+		printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", high_mem >> (20 - PAGE_SHIFT));
+#endif
+
+	/* take back the memory occupied by the kernel image and the bootmem alloc map */
+	reserve_bootmem(kstart, kend - kstart + bootmap_size);
+
+	/* reserve the memory occupied by the initial ramdisk */
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (LOADER_TYPE && INITRD_START) {
+		if (INITRD_START + INITRD_SIZE <= (low_top_pfn << PAGE_SHIFT)) {
+			reserve_bootmem(INITRD_START, INITRD_SIZE);
+			initrd_start = INITRD_START ? INITRD_START + PAGE_OFFSET : 0;
+			initrd_end = initrd_start + INITRD_SIZE;
+		}
+		else {
+			printk(KERN_ERR
+			       "initrd extends beyond end of memory (0x%08lx > 0x%08lx)\n"
+			       "disabling initrd\n",
+			       INITRD_START + INITRD_SIZE,
+			       low_top_pfn << PAGE_SHIFT);
+			initrd_start = 0;
+		}
+	}
+#endif
+
+} /* end setup_linux_memory() */
+#endif
+
+/*****************************************************************************/
+/*
+ * set up the memory map for uClinux
+ */
+#ifndef CONFIG_MMU
+static void __init setup_uclinux_memory(void)
+{
+#ifdef CONFIG_PROTECT_KERNEL
+	unsigned long dampr;
+#endif
+	unsigned long kend;
+	int bootmap_size;
+
+	kend = (unsigned long) &__kernel_image_end;
+	kend = (kend + PAGE_SIZE - 1) & PAGE_MASK;
+
+	/* give all the memory to the bootmap allocator,  tell it to put the
+	 * boot mem_map immediately following the kernel image
+	 */
+	bootmap_size = init_bootmem_node(NODE_DATA(0),
+					 kend >> PAGE_SHIFT,		/* map addr */
+					 memory_start >> PAGE_SHIFT,	/* start of RAM */
+					 memory_end >> PAGE_SHIFT	/* end of RAM */
+					 );
+
+	/* free all the usable memory */
+	free_bootmem(memory_start, memory_end - memory_start);
+
+	high_memory = (void *) (memory_end & PAGE_MASK);
+	max_mapnr = num_physpages = ((unsigned long) high_memory - PAGE_OFFSET) >> PAGE_SHIFT;
+
+	min_low_pfn = memory_start >> PAGE_SHIFT;
+	max_low_pfn = memory_end >> PAGE_SHIFT;
+	max_pfn = max_low_pfn;
+
+	/* now take back the bits the core kernel is occupying */
+#ifndef CONFIG_PROTECT_KERNEL
+	reserve_bootmem(kend, bootmap_size);
+	reserve_bootmem((unsigned long) &__kernel_image_start,
+			kend - (unsigned long) &__kernel_image_start);
+
+#else
+	dampr = __get_DAMPR(0);
+	dampr &= xAMPRx_SS;
+	dampr = (dampr >> 4) + 17;
+	dampr = 1 << dampr;
+
+	reserve_bootmem(__get_DAMPR(0) & xAMPRx_PPFN, dampr);
+#endif
+
+	/* reserve some memory to do uncached DMA through if requested */
+#ifdef CONFIG_RESERVE_DMA_COHERENT
+	if (dma_coherent_mem_start)
+		reserve_bootmem(dma_coherent_mem_start,
+				dma_coherent_mem_end - dma_coherent_mem_start);
+#endif
+
+} /* end setup_uclinux_memory() */
+#endif
+
+/*****************************************************************************/
+/*
+ * get CPU information for use by procfs
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+	const char *gr, *fr, *fm, *fp, *cm, *nem, *ble;
+#ifdef CONFIG_PM
+	const char *sep;
+#endif
+
+	gr  = cpu_hsr0_all & HSR0_GRHE	? "gr0-63"	: "gr0-31";
+	fr  = cpu_hsr0_all & HSR0_FRHE	? "fr0-63"	: "fr0-31";
+	fm  = cpu_psr_all  & PSR_EM	? ", Media"	: "";
+	fp  = cpu_psr_all  & PSR_EF	? ", FPU"	: "";
+	cm  = cpu_psr_all  & PSR_CM	? ", CCCR"	: "";
+	nem = cpu_psr_all  & PSR_NEM	? ", NE"	: "";
+	ble = cpu_psr_all  & PSR_BE	? "BE"		: "LE";
+
+	seq_printf(m,
+		   "CPU-Series:\t%s\n"
+		   "CPU-Core:\t%s, %s, %s%s%s\n"
+		   "CPU:\t\t%s\n"
+		   "MMU:\t\t%s\n"
+		   "FP-Media:\t%s%s%s\n"
+		   "System:\t\t%s",
+		   cpu_series,
+		   cpu_core, gr, ble, cm, nem,
+		   cpu_silicon,
+		   cpu_mmu,
+		   fr, fm, fp,
+		   cpu_system);
+
+	if (cpu_board1)
+		seq_printf(m, ", %s", cpu_board1);
+
+	if (cpu_board2)
+		seq_printf(m, ", %s", cpu_board2);
+
+	seq_printf(m, "\n");
+
+#ifdef CONFIG_PM
+	seq_printf(m, "PM-Controls:");
+	sep = "\t";
+
+	if (clock_bits_settable & CLOCK_BIT_CMODE) {
+		seq_printf(m, "%scmode=0x%04hx", sep, clock_cmodes_permitted);
+		sep = ", ";
+	}
+
+	if (clock_bits_settable & CLOCK_BIT_CM) {
+		seq_printf(m, "%scm=0x%lx", sep, clock_bits_settable & CLOCK_BIT_CM);
+		sep = ", ";
+	}
+
+	if (clock_bits_settable & CLOCK_BIT_P0) {
+		seq_printf(m, "%sp0=0x3", sep);
+		sep = ", ";
+	}
+
+	seq_printf(m, "%ssuspend=0x22\n", sep);
+#endif
+
+	seq_printf(m,
+		   "PM-Status:\tcmode=%d, cm=%d, p0=%d\n",
+		   clock_cmode_current, clock_cm_current, clock_p0_current);
+
+#define print_clk(TAG, VAR) \
+	seq_printf(m, "Clock-" TAG ":\t%lu.%2.2lu MHz\n", VAR / 1000000, (VAR / 10000) % 100)
+
+	print_clk("In",    __clkin_clock_speed_HZ);
+	print_clk("Core",  __core_clock_speed_HZ);
+	print_clk("SDRAM", __sdram_clock_speed_HZ);
+	print_clk("CBus",  __core_bus_clock_speed_HZ);
+	print_clk("Res",   __res_bus_clock_speed_HZ);
+	print_clk("Ext",   __ext_bus_clock_speed_HZ);
+	print_clk("DSU",   __dsu_clock_speed_HZ);
+
+	seq_printf(m,
+		   "BogoMips:\t%lu.%02lu\n",
+		   (loops_per_jiffy * HZ) / 500000, ((loops_per_jiffy * HZ) / 5000) % 100);
+
+	return 0;
+} /* end show_cpuinfo() */
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+	return *pos < NR_CPUS ? (void *) 0x12345678 : NULL;
+}
+
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return c_start(m, pos);
+}
+
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+
+struct seq_operations cpuinfo_op = {
+	.start	= c_start,
+	.next	= c_next,
+	.stop	= c_stop,
+	.show	= show_cpuinfo,
+};
+
+void arch_gettod(int *year, int *mon, int *day, int *hour,
+		 int *min, int *sec)
+{
+	*year = *mon = *day = *hour = *min = *sec = 0;
+}
+
+/*****************************************************************************/
+/*
+ *
+ */
+#ifdef CONFIG_MB93090_MB00
+static void __init mb93090_sendlcdcmd(uint32_t cmd)
+{
+	unsigned long base = __addr_LCD();
+	int loop;
+
+	/* request reading of the busy flag */
+	__set_LCD(base, LCD_CMD_READ_BUSY);
+	__set_LCD(base, LCD_CMD_READ_BUSY & ~LCD_E);
+
+	/* wait for the busy flag to become clear */
+	for (loop = 10000; loop > 0; loop--)
+		if (!(__get_LCD(base) & 0x80))
+			break;
+
+	/* send the command */
+	__set_LCD(base, cmd);
+	__set_LCD(base, cmd & ~LCD_E);
+
+} /* end mb93090_sendlcdcmd() */
+
+/*****************************************************************************/
+/*
+ * write to the MB93090 LEDs and LCD
+ */
+static void __init mb93090_display(void)
+{
+	const char *p;
+
+	__set_LEDS(0);
+
+	/* set up the LCD */
+	mb93090_sendlcdcmd(LCD_CMD_CLEAR);
+	mb93090_sendlcdcmd(LCD_CMD_FUNCSET(1,1,0));
+	mb93090_sendlcdcmd(LCD_CMD_ON(0,0));
+	mb93090_sendlcdcmd(LCD_CMD_HOME);
+
+	mb93090_sendlcdcmd(LCD_CMD_SET_DD_ADDR(0));
+	for (p = mb93090_banner; *p; p++)
+		mb93090_sendlcdcmd(LCD_DATA_WRITE(*p));
+
+	mb93090_sendlcdcmd(LCD_CMD_SET_DD_ADDR(64));
+	for (p = mb93090_version; *p; p++)
+		mb93090_sendlcdcmd(LCD_DATA_WRITE(*p));
+
+} /* end mb93090_display() */
+
+#endif // CONFIG_MB93090_MB00