Remove the arm26 port

The arm26 port has been in a state where it was far from even compiling
for quite some time.

Ian Molton agreed with the removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 278 deletions

diff --git a/arch/arm26/lib/kbd.c b/arch/arm26/lib/kbd.c
deleted file mode 100644
index cb56e943e006..000000000000
--- a/arch/arm26/lib/kbd.c
+++ /dev/null
@@ -1,278 +0,0 @@
-#include <linux/kd.h>
-//#include <linux/kbd_ll.h>
-#include <linux/kbd_kern.h>
-
-/*
- * Translation of escaped scancodes to keycodes.
- * This is now user-settable.
- * The keycodes 1-88,96-111,119 are fairly standard, and
- * should probably not be changed - changing might confuse X.
- * X also interprets scancode 0x5d (KEY_Begin).
- *
- * For 1-88 keycode equals scancode.
- */
-
-#define E0_KPENTER 96
-#define E0_RCTRL   97
-#define E0_KPSLASH 98
-#define E0_PRSCR   99
-#define E0_RALT    100
-#define E0_BREAK   101		/* (control-pause) */
-#define E0_HOME    102
-#define E0_UP      103
-#define E0_PGUP    104
-#define E0_LEFT    105
-#define E0_RIGHT   106
-#define E0_END     107
-#define E0_DOWN    108
-#define E0_PGDN    109
-#define E0_INS     110
-#define E0_DEL     111
-
-/* for USB 106 keyboard */
-#define E0_YEN         124
-#define E0_BACKSLASH   89
-
-
-#define E1_PAUSE   119
-
-/*
- * The keycodes below are randomly located in 89-95,112-118,120-127.
- * They could be thrown away (and all occurrences below replaced by 0),
- * but that would force many users to use the `setkeycodes' utility, where
- * they needed not before. It does not matter that there are duplicates, as
- * long as no duplication occurs for any single keyboard.
- */
-#define SC_LIM 89
-
-#define FOCUS_PF1 85		/* actual code! */
-#define FOCUS_PF2 89
-#define FOCUS_PF3 90
-#define FOCUS_PF4 91
-#define FOCUS_PF5 92
-#define FOCUS_PF6 93
-#define FOCUS_PF7 94
-#define FOCUS_PF8 95
-#define FOCUS_PF9 120
-#define FOCUS_PF10 121
-#define FOCUS_PF11 122
-#define FOCUS_PF12 123
-
-#define JAP_86     124
-/* tfj@olivia.ping.dk:
- * The four keys are located over the numeric keypad, and are
- * labelled A1-A4. It's an rc930 keyboard, from
- * Regnecentralen/RC International, Now ICL.
- * Scancodes: 59, 5a, 5b, 5c.
- */
-#define RGN1 124
-#define RGN2 125
-#define RGN3 126
-#define RGN4 127
-
-static unsigned char high_keys[128 - SC_LIM] = {
-	RGN1, RGN2, RGN3, RGN4, 0, 0, 0,	/* 0x59-0x5f */
-	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x60-0x67 */
-	0, 0, 0, 0, 0, FOCUS_PF11, 0, FOCUS_PF12,	/* 0x68-0x6f */
-	0, 0, 0, FOCUS_PF2, FOCUS_PF9, 0, 0, FOCUS_PF3,	/* 0x70-0x77 */
-	FOCUS_PF4, FOCUS_PF5, FOCUS_PF6, FOCUS_PF7,	/* 0x78-0x7b */
-	FOCUS_PF8, JAP_86, FOCUS_PF10, 0	/* 0x7c-0x7f */
-};
-
-/* BTC */
-#define E0_MACRO   112
-/* LK450 */
-#define E0_F13     113
-#define E0_F14     114
-#define E0_HELP    115
-#define E0_DO      116
-#define E0_F17     117
-#define E0_KPMINPLUS 118
-/*
- * My OmniKey generates e0 4c for  the "OMNI" key and the
- * right alt key does nada. [kkoller@nyx10.cs.du.edu]
- */
-#define E0_OK  124
-/*
- * New microsoft keyboard is rumoured to have
- * e0 5b (left window button), e0 5c (right window button),
- * e0 5d (menu button). [or: LBANNER, RBANNER, RMENU]
- * [or: Windows_L, Windows_R, TaskMan]
- */
-#define E0_MSLW        125
-#define E0_MSRW        126
-#define E0_MSTM        127
-
-static unsigned char e0_keys[128] = {
-	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x00-0x07 */
-	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x08-0x0f */
-	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x10-0x17 */
-	0, 0, 0, 0, E0_KPENTER, E0_RCTRL, 0, 0,	/* 0x18-0x1f */
-	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x20-0x27 */
-	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x28-0x2f */
-	0, 0, 0, 0, 0, E0_KPSLASH, 0, E0_PRSCR,	/* 0x30-0x37 */
-	E0_RALT, 0, 0, 0, 0, E0_F13, E0_F14, E0_HELP,	/* 0x38-0x3f */
-	E0_DO, E0_F17, 0, 0, 0, 0, E0_BREAK, E0_HOME,	/* 0x40-0x47 */
-	E0_UP, E0_PGUP, 0, E0_LEFT, E0_OK, E0_RIGHT, E0_KPMINPLUS, E0_END,	/* 0x48-0x4f */
-	E0_DOWN, E0_PGDN, E0_INS, E0_DEL, 0, 0, 0, 0,	/* 0x50-0x57 */
-	0, 0, 0, E0_MSLW, E0_MSRW, E0_MSTM, 0, 0,	/* 0x58-0x5f */
-	0, 0, 0, 0, 0, 0, 0, 0,	/* 0x60-0x67 */
-	0, 0, 0, 0, 0, 0, 0, E0_MACRO,	/* 0x68-0x6f */
-	//0, 0, 0, 0, 0, 0, 0, 0,                          /* 0x70-0x77 */
-	0, 0, 0, 0, 0, E0_BACKSLASH, 0, 0,	/* 0x70-0x77 */
-	0, 0, 0, E0_YEN, 0, 0, 0, 0	/* 0x78-0x7f */
-};
-
-static int gen_setkeycode(unsigned int scancode, unsigned int keycode)
-{
-	if (scancode < SC_LIM || scancode > 255 || keycode > 127)
-		return -EINVAL;
-	if (scancode < 128)
-		high_keys[scancode - SC_LIM] = keycode;
-	else
-		e0_keys[scancode - 128] = keycode;
-	return 0;
-}
-
-static int gen_getkeycode(unsigned int scancode)
-{
-	return
-	    (scancode < SC_LIM || scancode > 255) ? -EINVAL :
-	    (scancode <
-	     128) ? high_keys[scancode - SC_LIM] : e0_keys[scancode - 128];
-}
-
-static int
-gen_translate(unsigned char scancode, unsigned char *keycode, char raw_mode)
-{
-	static int prev_scancode;
-
-	/* special prefix scancodes.. */
-	if (scancode == 0xe0 || scancode == 0xe1) {
-		prev_scancode = scancode;
-		return 0;
-	}
-
-	/* 0xFF is sent by a few keyboards, ignore it. 0x00 is error */
-	if (scancode == 0x00 || scancode == 0xff) {
-		prev_scancode = 0;
-		return 0;
-	}
-
-	scancode &= 0x7f;
-
-	if (prev_scancode) {
-		/*
-		 * usually it will be 0xe0, but a Pause key generates
-		 * e1 1d 45 e1 9d c5 when pressed, and nothing when released
-		 */
-		if (prev_scancode != 0xe0) {
-			if (prev_scancode == 0xe1 && scancode == 0x1d) {
-				prev_scancode = 0x100;
-				return 0;
-			}
-				else if (prev_scancode == 0x100
-					 && scancode == 0x45) {
-				*keycode = E1_PAUSE;
-				prev_scancode = 0;
-			} else {
-#ifdef KBD_REPORT_UNKN
-				if (!raw_mode)
-					printk(KERN_INFO
-					       "keyboard: unknown e1 escape sequence\n");
-#endif
-				prev_scancode = 0;
-				return 0;
-			}
-		} else {
-			prev_scancode = 0;
-			/*
-			 *  The keyboard maintains its own internal caps lock and
-			 *  num lock statuses. In caps lock mode E0 AA precedes make
-			 *  code and E0 2A follows break code. In num lock mode,
-			 *  E0 2A precedes make code and E0 AA follows break code.
-			 *  We do our own book-keeping, so we will just ignore these.
-			 */
-			/*
-			 *  For my keyboard there is no caps lock mode, but there are
-			 *  both Shift-L and Shift-R modes. The former mode generates
-			 *  E0 2A / E0 AA pairs, the latter E0 B6 / E0 36 pairs.
-			 *  So, we should also ignore the latter. - aeb@cwi.nl
-			 */
-			if (scancode == 0x2a || scancode == 0x36)
-				return 0;
-
-			if (e0_keys[scancode])
-				*keycode = e0_keys[scancode];
-			else {
-#ifdef KBD_REPORT_UNKN
-				if (!raw_mode)
-					printk(KERN_INFO
-					       "keyboard: unknown scancode e0 %02x\n",
-					       scancode);
-#endif
-				return 0;
-			}
-		}
-	} else if (scancode >= SC_LIM) {
-		/* This happens with the FOCUS 9000 keyboard
-		   Its keys PF1..PF12 are reported to generate
-		   55 73 77 78 79 7a 7b 7c 74 7e 6d 6f
-		   Moreover, unless repeated, they do not generate
-		   key-down events, so we have to zero up_flag below */
-		/* Also, Japanese 86/106 keyboards are reported to
-		   generate 0x73 and 0x7d for \ - and \ | respectively. */
-		/* Also, some Brazilian keyboard is reported to produce
-		   0x73 and 0x7e for \ ? and KP-dot, respectively. */
-
-		*keycode = high_keys[scancode - SC_LIM];
-
-		if (!*keycode) {
-			if (!raw_mode) {
-#ifdef KBD_REPORT_UNKN
-				printk(KERN_INFO
-				       "keyboard: unrecognized scancode (%02x)"
-				       " - ignored\n", scancode);
-#endif
-			}
-			return 0;
-		}
-	} else
-		*keycode = scancode;
-	return 1;
-}
-
-static char gen_unexpected_up(unsigned char keycode)
-{
-	/* unexpected, but this can happen: maybe this was a key release for a
-	   FOCUS 9000 PF key; if we want to see it, we have to clear up_flag */
-	if (keycode >= SC_LIM || keycode == 85)
-		return 0;
-	else
-		return 0200;
-}
-
-/*
- * These are the default mappings
- */
-int  (*k_setkeycode)(unsigned int, unsigned int) = gen_setkeycode;
-int  (*k_getkeycode)(unsigned int) = gen_getkeycode;
-int  (*k_translate)(unsigned char, unsigned char *, char) = gen_translate;
-char (*k_unexpected_up)(unsigned char) = gen_unexpected_up;
-void (*k_leds)(unsigned char);
-
-/* Simple translation table for the SysRq keys */
-
-#ifdef CONFIG_MAGIC_SYSRQ
-static unsigned char gen_sysrq_xlate[128] =
-	"\000\0331234567890-=\177\t"	/* 0x00 - 0x0f */
-	"qwertyuiop[]\r\000as"	/* 0x10 - 0x1f */
-	"dfghjkl;'`\000\\zxcv"	/* 0x20 - 0x2f */
-	"bnm,./\000*\000 \000\201\202\203\204\205"	/* 0x30 - 0x3f */
-	"\206\207\210\211\212\000\000789-456+1"	/* 0x40 - 0x4f */
-	"230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000"	/* 0x50 - 0x5f */
-	"\r\000/";			/* 0x60 - 0x6f */
-
-unsigned char *k_sysrq_xlate = gen_sysrq_xlate;
-int k_sysrq_key = 0x54;
-#endif