Remove the arm26 port

The arm26 port has been in a state where it was far from even compiling
for quite some time.

Ian Molton agreed with the removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 112 deletions

diff --git a/arch/arm/nwfpe/entry26.S b/arch/arm/nwfpe/entry26.S
deleted file mode 100644
index 3e6fb5d21d64..000000000000
--- a/arch/arm/nwfpe/entry26.S
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
-    NetWinder Floating Point Emulator
-    (c) Rebel.COM, 1998
-    (c) Philip Blundell 1998-1999
-
-    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#include <asm/asm-offsets.h>
-
-/* This is the kernel's entry point into the floating point emulator.
-It is called from the kernel with code similar to this:
-
-	mov	fp, #0
-	teqp	pc, #PSR_I_BIT | SVC_MODE
-	ldr	r4, .LC2
-	ldr	pc, [r4]		@ Call FP module USR entry point
-
-The kernel expects the emulator to return via one of two possible
-points of return it passes to the emulator.  The emulator, if
-successful in its emulation, jumps to ret_from_exception and the
-kernel takes care of returning control from the trap to the user code.
-If the emulator is unable to emulate the instruction, it returns to
-fpundefinstr and the kernel halts the user program with a core dump.
-
-This routine does four things:
-
-1) It saves SP into a variable called userRegisters.  The kernel has
-created a struct pt_regs on the stack and saved the user registers
-into it.  See /usr/include/asm/proc/ptrace.h for details.  The
-emulator code uses userRegisters as the base of an array of words from
-which the contents of the registers can be extracted.
-
-2) It locates the FP emulator work area within the TSS structure and
-points `fpa11' to it.
-
-3) It calls EmulateAll to emulate a floating point instruction.
-EmulateAll returns 1 if the emulation was successful, or 0 if not.
-
-4) If an instruction has been emulated successfully, it looks ahead at
-the next instruction.  If it is a floating point instruction, it
-executes the instruction, without returning to user space.  In this
-way it repeatedly looks ahead and executes floating point instructions
-until it encounters a non floating point instruction, at which time it
-returns via _fpreturn.
-
-This is done to reduce the effect of the trap overhead on each
-floating point instructions.  GCC attempts to group floating point
-instructions to allow the emulator to spread the cost of the trap over
-several floating point instructions.  */
-
-	.globl	nwfpe_enter
-nwfpe_enter:
-	mov	sl, sp
-	ldr	r5, [sp, #60]		@ get contents of PC
-	bic	r5, r5, #0xfc000003
-	ldr	r0, [r5, #-4]		@ get actual instruction into r0
-	bl	EmulateAll		@ emulate the instruction
-1:	cmp	r0, #0			@ was emulation successful
-	beq	fpundefinstr		@ no, return failure
-
-next:
-.Lx1:	ldrt	r6, [r5], #4		@ get the next instruction and
-					@ increment PC
-
-	and	r2, r6, #0x0F000000	@ test for FP insns
-	teq	r2, #0x0C000000
-	teqne	r2, #0x0D000000
-	teqne	r2, #0x0E000000
-	bne	ret_from_exception	@ return ok if not a fp insn
-
-	ldr	r9, [sp, #60]		@ get new condition codes
-	and	r9, r9, #0xfc000003
-	orr	r7, r5, r9
-	str	r7, [sp, #60]		@ update PC copy in regs
-
-	mov	r0, r6			@ save a copy
-	mov	r1, r9			@ fetch the condition codes
-	bl	checkCondition		@ check the condition
-	cmp	r0, #0			@ r0 = 0 ==> condition failed
-
-	@ if condition code failed to match, next insn
-	beq	next			@ get the next instruction;
-
-	mov	r0, r6			@ prepare for EmulateAll()
-	adr	lr, 1b
-	orr	lr, lr, #3
-	b	EmulateAll		@ if r0 != 0, goto EmulateAll
-
-.Lret:	b	ret_from_exception	@ let the user eat segfaults
-	
-	@ We need to be prepared for the instruction at .Lx1 to fault.
-	@ Emit the appropriate exception gunk to fix things up.
-	.section __ex_table,"a"
-	.align	3
-	.long	.Lx1
-	ldr	lr, [lr, $(.Lret - .Lx1)/4]
-	.previous