mach-ux500: config Ux500 PL011 PL022 PL180 for DMA

This will configure the platform data for the PL011, PL022
and PL180 (derivate) PrimeCells found in the Ux500 to use DMA
with the generic DMA engine for DMA40.

Signed-off-by: Per Forlin <per.forlin@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 77 insertions, 0 deletions

diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 4ba3d930a06e..d1ae6a09979d 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -13,12 +13,14 @@
 #include <linux/platform_device.h>
 
 #include <plat/pincfg.h>
+#include <plat/ste_dma40.h>
 #include <mach/devices.h>
 #include <mach/hardware.h>
 
 #include "devices-db8500.h"
 #include "pins-db8500.h"
 #include "board-mop500.h"
+#include "ste-dma40-db8500.h"
 
 static pin_cfg_t mop500_sdi_pins[] = {
 	/* SDI0 (MicroSD slot) */
@@ -86,6 +88,26 @@ static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd,
 	       MCI_DATA2DIREN | MCI_DATA31DIREN;
 }
 
+#ifdef CONFIG_STE_DMA40
+struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+	.src_dev_type = DB8500_DMA_DEV29_SD_MM0_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+
+static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+	.dst_dev_type = DB8500_DMA_DEV29_SD_MM0_TX,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+#endif
+
 static struct mmci_platform_data mop500_sdi0_data = {
 	.vdd_handler	= mop500_sdi0_vdd_handler,
 	.ocr_mask	= MMC_VDD_29_30,
@@ -93,6 +115,11 @@ static struct mmci_platform_data mop500_sdi0_data = {
 	.capabilities	= MMC_CAP_4_BIT_DATA,
 	.gpio_cd	= GPIO_SDMMC_CD,
 	.gpio_wp	= -1,
+#ifdef CONFIG_STE_DMA40
+	.dma_filter	= stedma40_filter,
+	.dma_rx_param	= &mop500_sdi0_dma_cfg_rx,
+	.dma_tx_param	= &mop500_sdi0_dma_cfg_tx,
+#endif
 };
 
 void mop500_sdi_tc35892_init(void)
@@ -116,18 +143,63 @@ void mop500_sdi_tc35892_init(void)
  * SDI 2 (POP eMMC, not on DB8500ed)
  */
 
+#ifdef CONFIG_STE_DMA40
+struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+	.src_dev_type =  DB8500_DMA_DEV28_SD_MM2_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+
+static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+	.dst_dev_type = DB8500_DMA_DEV28_SD_MM2_TX,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+#endif
+
 static struct mmci_platform_data mop500_sdi2_data = {
 	.ocr_mask	= MMC_VDD_165_195,
 	.f_max		= 100000000,
 	.capabilities	= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 	.gpio_cd	= -1,
 	.gpio_wp	= -1,
+#ifdef CONFIG_STE_DMA40
+	.dma_filter	= stedma40_filter,
+	.dma_rx_param	= &mop500_sdi2_dma_cfg_rx,
+	.dma_tx_param	= &mop500_sdi2_dma_cfg_tx,
+#endif
 };
 
 /*
  * SDI 4 (on-board eMMC)
  */
 
+#ifdef CONFIG_STE_DMA40
+struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_PERIPH_TO_MEM,
+	.src_dev_type =  DB8500_DMA_DEV42_SD_MM4_RX,
+	.dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+
+static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
+	.mode = STEDMA40_MODE_LOGICAL,
+	.dir = STEDMA40_MEM_TO_PERIPH,
+	.src_dev_type = STEDMA40_DEV_SRC_MEMORY,
+	.dst_dev_type = DB8500_DMA_DEV42_SD_MM4_TX,
+	.src_info.data_width = STEDMA40_WORD_WIDTH,
+	.dst_info.data_width = STEDMA40_WORD_WIDTH,
+};
+#endif
+
 static struct mmci_platform_data mop500_sdi4_data = {
 	.ocr_mask	= MMC_VDD_29_30,
 	.f_max		= 100000000,
@@ -135,6 +207,11 @@ static struct mmci_platform_data mop500_sdi4_data = {
 			  MMC_CAP_MMC_HIGHSPEED,
 	.gpio_cd	= -1,
 	.gpio_wp	= -1,
+#ifdef CONFIG_STE_DMA40
+	.dma_filter	= stedma40_filter,
+	.dma_rx_param	= &mop500_sdi4_dma_cfg_rx,
+	.dma_tx_param	= &mop500_sdi4_dma_cfg_tx,
+#endif
 };
 
 void __init mop500_sdi_init(void)