ARM: shmobile: INTC External IRQ pin driver on sh73a0

Adjust the sh73a0 IRQ code to make use of the
INTC External IRQ pin driver for external
interrupt pins IRQ0 -> IRQ31.

This removes quite a bit of special-case code
in intc-sh73a0.c but the number of lines get
replaced with platform device information in
setup-sh73a0.c. The PFC code is also adjusted
to make gpio_to_irq() return the correct
interrupt number.

At this point the DT reference implementations
are not covered. In the future such code shall
tie in the INTC External IRQ pin driver via
DT, so this kind of verbose code is not needed
for the long term DT case.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

1 files changed, 0 insertions, 117 deletions

diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index a81a1d804e2e..19a26f4579b3 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -260,108 +260,6 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
 	return 0; /* always allow wakeup */
 }
 
-#define RELOC_BASE 0x1200
-
-/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */
-#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
-
-INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
-		 INTCS_VECT_RELOC, "sh73a0-intca-irq-pins");
-
-static int to_gic_irq(struct irq_data *data)
-{
-	unsigned int vect = irq2evt(data->irq) - INTCS_VECT_BASE;
-
-	if (vect >= 0x3200)
-		vect -= 0x3000;
-	else
-		vect -= 0x0200;
-
-	return gic_spi((vect >> 5) + 1);
-}
-
-static int to_intca_reloc_irq(struct irq_data *data)
-{
-	return data->irq + (RELOC_BASE >> 5);
-}
-
-#define irq_cb(cb, irq) irq_get_chip(irq)->cb(irq_get_irq_data(irq))
-#define irq_cbp(cb, irq, p...) irq_get_chip(irq)->cb(irq_get_irq_data(irq), p)
-
-static void intca_gic_enable(struct irq_data *data)
-{
-	irq_cb(irq_unmask, to_intca_reloc_irq(data));
-	irq_cb(irq_unmask, to_gic_irq(data));
-}
-
-static void intca_gic_disable(struct irq_data *data)
-{
-	irq_cb(irq_mask, to_gic_irq(data));
-	irq_cb(irq_mask, to_intca_reloc_irq(data));
-}
-
-static void intca_gic_mask_ack(struct irq_data *data)
-{
-	irq_cb(irq_mask, to_gic_irq(data));
-	irq_cb(irq_mask_ack, to_intca_reloc_irq(data));
-}
-
-static void intca_gic_eoi(struct irq_data *data)
-{
-	irq_cb(irq_eoi, to_gic_irq(data));
-}
-
-static int intca_gic_set_type(struct irq_data *data, unsigned int type)
-{
-	return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type);
-}
-
-#ifdef CONFIG_SMP
-static int intca_gic_set_affinity(struct irq_data *data,
-				  const struct cpumask *cpumask,
-				  bool force)
-{
-	return irq_cbp(irq_set_affinity, to_gic_irq(data), cpumask, force);
-}
-#endif
-
-struct irq_chip intca_gic_irq_chip = {
-	.name			= "INTCA-GIC",
-	.irq_mask		= intca_gic_disable,
-	.irq_unmask		= intca_gic_enable,
-	.irq_mask_ack		= intca_gic_mask_ack,
-	.irq_eoi		= intca_gic_eoi,
-	.irq_enable		= intca_gic_enable,
-	.irq_disable		= intca_gic_disable,
-	.irq_shutdown		= intca_gic_disable,
-	.irq_set_type		= intca_gic_set_type,
-	.irq_set_wake		= sh73a0_set_wake,
-#ifdef CONFIG_SMP
-	.irq_set_affinity	= intca_gic_set_affinity,
-#endif
-};
-
-static int to_intc_vect(int irq)
-{
-	unsigned int irq_pin = irq - gic_spi(1);
-	unsigned int offs;
-
-	if (irq_pin < 16)
-		offs = 0x0200;
-	else
-		offs = 0x3000;
-
-	return offs + (irq_pin << 5);
-}
-
-static irqreturn_t sh73a0_irq_pin_demux(int irq, void *dev_id)
-{
-	generic_handle_irq(intcs_evt2irq(to_intc_vect(irq)));
-	return IRQ_HANDLED;
-}
-
-static struct irqaction sh73a0_irq_pin_cascade[32];
-
 #define PINTER0_PHYS 0xe69000a0
 #define PINTER1_PHYS 0xe69000a4
 #define PINTER0_VIRT IOMEM(0xe69000a0)
@@ -422,13 +320,11 @@ void __init sh73a0_init_irq(void)
 	void __iomem *gic_dist_base = IOMEM(0xf0001000);
 	void __iomem *gic_cpu_base = IOMEM(0xf0000100);
 	void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
-	int k, n;
 
 	gic_init(0, 29, gic_dist_base, gic_cpu_base);
 	gic_arch_extn.irq_set_wake = sh73a0_set_wake;
 
 	register_intc_controller(&intcs_desc);
-	register_intc_controller(&intca_irq_pins_desc);
 	register_intc_controller(&intc_pint0_desc);
 	register_intc_controller(&intc_pint1_desc);
 
@@ -438,19 +334,6 @@ void __init sh73a0_init_irq(void)
 	sh73a0_intcs_cascade.dev_id = intevtsa;
 	setup_irq(gic_spi(50), &sh73a0_intcs_cascade);
 
-	/* IRQ pins require special handling through INTCA and GIC */
-	for (k = 0; k < 32; k++) {
-		sh73a0_irq_pin_cascade[k].name = "INTCA-GIC cascade";
-		sh73a0_irq_pin_cascade[k].handler = sh73a0_irq_pin_demux;
-		setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
-
-		n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
-		WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
-		irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
-					      handle_level_irq, "level");
-		set_irq_flags(n, IRQF_VALID); /* yuck */
-	}
-
 	/* PINT pins are sanely tied to the GIC as SPI */
 	sh73a0_pint0_cascade.name = "PINT0 cascade";
 	sh73a0_pint0_cascade.handler = sh73a0_pint0_demux;