Merge branch 'pxa-plat' into devel

* pxa-plat: (53 commits)
  [ARM] 4762/1: Basic support for Toradex Colibri module
  [ARM] pxa: fix mci_init functions returning -1
  [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
  [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270
  [ARM] 4746/1: pcm027: network support for phyCORE-PXA270
  [ARM] 4745/1: pcm027: default configuration
  [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module
  [NET] smc91x: Make smc91x use IRQ resource trigger flags
  [ARM] pxa: add default config for littleton
  [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)
  [ARM] 4664/1: Add basic support for HTC Magician PDA phones
  [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.
  [ARM] pxa: skip registers saving/restoring if entering standby mode
  [ARM] pxa: fix PXA27x resume
  [ARM] pxa: Avoid fiddling with CKEN register on suspend
  [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme
  [ARM] pxa: Add zylonite MFP wakeup configurations
  [ARM] pxa: program MFPs for low power mode when suspending
  [ARM] pxa: make MFP configuration processor independent
  [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions
  ...

Conflicts:

	arch/arm/mach-pxa/ssp.c

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 134 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
new file mode 100644
index 000000000000..6db54e31c397
--- /dev/null
+++ b/arch/arm/mach-pxa/colibri.c
@@ -0,0 +1,134 @@
+/*
+ *  linux/arch/arm/mach-pxa/colibri.c
+ *
+ *  Support for Toradex PXA27x based Colibri module
+ *  Daniel Mack <daniel@caiaq.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/colibri.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/*
+ * Flash
+ */
+static struct mtd_partition colibri_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.offset =	0x00000000,
+		.size =		0x00040000,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	}, {
+		.name =		"Kernel",
+		.offset =	0x00040000,
+		.size =		0x00400000,
+		.mask_flags =	0
+	}, {
+		.name =		"Rootfs",
+		.offset =	0x00440000,
+		.size =		MTDPART_SIZ_FULL,
+		.mask_flags =	0
+	}
+};
+
+static struct physmap_flash_data colibri_flash_data[] = {
+	{
+		.width		= 4,			/* bankwidth in bytes */
+		.parts		= colibri_partitions,
+		.nr_parts	= ARRAY_SIZE(colibri_partitions)
+	}
+};
+
+static struct resource flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev 	= {
+		.platform_data = colibri_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * DM9000 Ethernet
+ */
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= COLIBRI_ETH_PHYS,
+		.end	= COLIBRI_ETH_PHYS + 3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= COLIBRI_ETH_PHYS + 4,
+		.end	= COLIBRI_ETH_PHYS + 4 + 500,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= COLIBRI_ETH_IRQ,
+		.end	= COLIBRI_ETH_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+};
+
+static struct platform_device *colibri_devices[] __initdata = {
+	&flash_device,
+	&dm9000_device,
+};
+
+static void __init colibri_init(void)
+{
+	/* DM9000 LAN */
+	pxa_gpio_mode(GPIO78_nCS_2_MD);
+	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+	set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
+
+	platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
+}
+
+MACHINE_START(COLIBRI, "Toradex Colibri PXA27x")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= COLIBRI_SDRAM_BASE + 0x100,
+	.init_machine	= colibri_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END