gpio/mxs: Move Freescale mxs gpio driver to drivers/gpio

GPIO drivers are getting moved to drivers/gpio for cleanup and
consolidation.  This patch moves the mxs driver.  Follow up patches
will clean it up and make it a fine upstanding example of a gpio
driver.

v2: Removed header file entirely and put struct definition directly
    into driver.  The struct isn't used anywhere else in the kernel.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

4 files changed, 1 insertions, 367 deletions

diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 58e892376bf2..6c38262a3aaa 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,5 +1,5 @@
 # Common support
-obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o
+obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o
 
 obj-$(CONFIG_MXS_OCOTP) += ocotp.o
 obj-$(CONFIG_PM) += pm.o
diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c
deleted file mode 100644
index 2c950fef71a8..000000000000
--- a/arch/arm/mach-mxs/gpio.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/*
- * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * Based on code from Freescale,
- * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-#include <mach/mx23.h>
-#include <mach/mx28.h>
-#include <asm-generic/bug.h>
-
-#include "gpio.h"
-
-static struct mxs_gpio_port *mxs_gpio_ports;
-static int gpio_table_size;
-
-#define PINCTRL_DOUT(n)		((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10)
-#define PINCTRL_DIN(n)		((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10)
-#define PINCTRL_DOE(n)		((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10)
-#define PINCTRL_PIN2IRQ(n)	((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10)
-#define PINCTRL_IRQEN(n)	((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10)
-#define PINCTRL_IRQLEV(n)	((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10)
-#define PINCTRL_IRQPOL(n)	((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10)
-#define PINCTRL_IRQSTAT(n)	((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10)
-
-#define GPIO_INT_FALL_EDGE	0x0
-#define GPIO_INT_LOW_LEV	0x1
-#define GPIO_INT_RISE_EDGE	0x2
-#define GPIO_INT_HIGH_LEV	0x3
-#define GPIO_INT_LEV_MASK	(1 << 0)
-#define GPIO_INT_POL_MASK	(1 << 1)
-
-/* Note: This driver assumes 32 GPIOs are handled in one register */
-
-static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index)
-{
-	__mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id));
-}
-
-static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index,
-				int enable)
-{
-	if (enable) {
-		__mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id));
-		__mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id));
-	} else {
-		__mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id));
-	}
-}
-
-static void mxs_gpio_ack_irq(struct irq_data *d)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f);
-}
-
-static void mxs_gpio_mask_irq(struct irq_data *d)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0);
-}
-
-static void mxs_gpio_unmask_irq(struct irq_data *d)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1);
-}
-
-static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset);
-
-static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	u32 pin_mask = 1 << (gpio & 31);
-	struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
-	void __iomem *pin_addr;
-	int edge;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		edge = GPIO_INT_RISE_EDGE;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		edge = GPIO_INT_FALL_EDGE;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		edge = GPIO_INT_LOW_LEV;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		edge = GPIO_INT_HIGH_LEV;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	/* set level or edge */
-	pin_addr = port->base + PINCTRL_IRQLEV(port->id);
-	if (edge & GPIO_INT_LEV_MASK)
-		__mxs_setl(pin_mask, pin_addr);
-	else
-		__mxs_clrl(pin_mask, pin_addr);
-
-	/* set polarity */
-	pin_addr = port->base + PINCTRL_IRQPOL(port->id);
-	if (edge & GPIO_INT_POL_MASK)
-		__mxs_setl(pin_mask, pin_addr);
-	else
-		__mxs_clrl(pin_mask, pin_addr);
-
-	clear_gpio_irqstatus(port, gpio & 0x1f);
-
-	return 0;
-}
-
-/* MXS has one interrupt *per* gpio port */
-static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc)
-{
-	u32 irq_stat;
-	struct mxs_gpio_port *port = (struct mxs_gpio_port *)irq_get_handler_data(irq);
-	u32 gpio_irq_no_base = port->virtual_irq_start;
-
-	desc->irq_data.chip->irq_ack(&desc->irq_data);
-
-	irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) &
-			__raw_readl(port->base + PINCTRL_IRQEN(port->id));
-
-	while (irq_stat != 0) {
-		int irqoffset = fls(irq_stat) - 1;
-		generic_handle_irq(gpio_irq_no_base + irqoffset);
-		irq_stat &= ~(1 << irqoffset);
-	}
-}
-
-/*
- * Set interrupt number "irq" in the GPIO as a wake-up source.
- * While system is running, all registered GPIO interrupts need to have
- * wake-up enabled. When system is suspended, only selected GPIO interrupts
- * need to have wake-up enabled.
- * @param  irq          interrupt source number
- * @param  enable       enable as wake-up if equal to non-zero
- * @return       This function returns 0 on success.
- */
-static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
-{
-	u32 gpio = irq_to_gpio(d->irq);
-	u32 gpio_idx = gpio & 0x1f;
-	struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
-
-	if (enable) {
-		if (port->irq_high && (gpio_idx >= 16))
-			enable_irq_wake(port->irq_high);
-		else
-			enable_irq_wake(port->irq);
-	} else {
-		if (port->irq_high && (gpio_idx >= 16))
-			disable_irq_wake(port->irq_high);
-		else
-			disable_irq_wake(port->irq);
-	}
-
-	return 0;
-}
-
-static struct irq_chip gpio_irq_chip = {
-	.name = "mxs gpio",
-	.irq_ack = mxs_gpio_ack_irq,
-	.irq_mask = mxs_gpio_mask_irq,
-	.irq_unmask = mxs_gpio_unmask_irq,
-	.irq_set_type = mxs_gpio_set_irq_type,
-	.irq_set_wake = mxs_gpio_set_wake_irq,
-};
-
-static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset,
-				int dir)
-{
-	struct mxs_gpio_port *port =
-		container_of(chip, struct mxs_gpio_port, chip);
-	void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id);
-
-	if (dir)
-		__mxs_setl(1 << offset, pin_addr);
-	else
-		__mxs_clrl(1 << offset, pin_addr);
-}
-
-static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct mxs_gpio_port *port =
-		container_of(chip, struct mxs_gpio_port, chip);
-
-	return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1;
-}
-
-static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	struct mxs_gpio_port *port =
-		container_of(chip, struct mxs_gpio_port, chip);
-	void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id);
-
-	if (value)
-		__mxs_setl(1 << offset, pin_addr);
-	else
-		__mxs_clrl(1 << offset, pin_addr);
-}
-
-static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	struct mxs_gpio_port *port =
-		container_of(chip, struct mxs_gpio_port, chip);
-
-	return port->virtual_irq_start + offset;
-}
-
-static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	mxs_set_gpio_direction(chip, offset, 0);
-	return 0;
-}
-
-static int mxs_gpio_direction_output(struct gpio_chip *chip,
-				     unsigned offset, int value)
-{
-	mxs_gpio_set(chip, offset, value);
-	mxs_set_gpio_direction(chip, offset, 1);
-	return 0;
-}
-
-int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt)
-{
-	int i, j;
-
-	/* save for local usage */
-	mxs_gpio_ports = port;
-	gpio_table_size = cnt;
-
-	pr_info("MXS GPIO hardware\n");
-
-	for (i = 0; i < cnt; i++) {
-		/* disable the interrupt and clear the status */
-		__raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i));
-		__raw_writel(0, port[i].base + PINCTRL_IRQEN(i));
-
-		/* clear address has to be used to clear IRQSTAT bits */
-		__mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i));
-
-		for (j = port[i].virtual_irq_start;
-			j < port[i].virtual_irq_start + 32; j++) {
-			irq_set_chip_and_handler(j, &gpio_irq_chip,
-						 handle_level_irq);
-			set_irq_flags(j, IRQF_VALID);
-		}
-
-		/* setup one handler for each entry */
-		irq_set_chained_handler(port[i].irq, mxs_gpio_irq_handler);
-		irq_set_handler_data(port[i].irq, &port[i]);
-
-		/* register gpio chip */
-		port[i].chip.direction_input = mxs_gpio_direction_input;
-		port[i].chip.direction_output = mxs_gpio_direction_output;
-		port[i].chip.get = mxs_gpio_get;
-		port[i].chip.set = mxs_gpio_set;
-		port[i].chip.to_irq = mxs_gpio_to_irq;
-		port[i].chip.base = i * 32;
-		port[i].chip.ngpio = 32;
-
-		/* its a serious configuration bug when it fails */
-		BUG_ON(gpiochip_add(&port[i].chip) < 0);
-	}
-
-	return 0;
-}
-
-#define MX23_GPIO_BASE	MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR)
-#define MX28_GPIO_BASE	MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR)
-
-#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id)				\
-	{								\
-		.chip.label = "gpio-" #_id,				\
-		.id = _id,						\
-		.irq = _irq,						\
-		.base = _base,						\
-		.virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32,	\
-	}
-
-#ifdef CONFIG_SOC_IMX23
-static struct mxs_gpio_port mx23_gpio_ports[] = {
-	DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0),
-	DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1),
-	DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2),
-};
-
-int __init mx23_register_gpios(void)
-{
-	return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports));
-}
-#endif
-
-#ifdef CONFIG_SOC_IMX28
-static struct mxs_gpio_port mx28_gpio_ports[] = {
-	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0),
-	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1),
-	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2),
-	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3),
-	DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4),
-};
-
-int __init mx28_register_gpios(void)
-{
-	return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports));
-}
-#endif
diff --git a/arch/arm/mach-mxs/gpio.h b/arch/arm/mach-mxs/gpio.h
deleted file mode 100644
index 005bb06630b1..000000000000
--- a/arch/arm/mach-mxs/gpio.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA  02110-1301, USA.
- */
-
-#ifndef __MXS_GPIO_H__
-#define __MXS_GPIO_H__
-
-struct mxs_gpio_port {
-	void __iomem *base;
-	int id;
-	int irq;
-	int irq_high;
-	int virtual_irq_start;
-	struct gpio_chip chip;
-};
-
-int mxs_gpio_init(struct mxs_gpio_port*, int);
-
-#endif /* __MXS_GPIO_H__ */
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index eacdc6b0e70a..56767a5cce0e 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -26,7 +26,6 @@
 #include <mach/iomux-mx28.h>
 
 #include "devices-mx28.h"
-#include "gpio.h"
 
 #define MX28EVK_FLEXCAN_SWITCH	MXS_GPIO_NR(2, 13)
 #define MX28EVK_FEC_PHY_POWER	MXS_GPIO_NR(2, 15)