ARM: remove support for mxc91231

Since support for mxc91231 was introduced 2009 it only saw patches that
were part of (mxc or arm) global cleanups. The only supported machine
only had 4 devices (2x UART, sdhc, watchdog).

Cc: Dmitriy Taychenachev <dimichxp@gmail.com>
LAKML-Reference: 1302211482-17926-1-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

1 files changed, 0 insertions, 51 deletions

diff --git a/arch/arm/mach-mxc91231/system.c b/arch/arm/mach-mxc91231/system.c
deleted file mode 100644
index 736f7efd874a..000000000000
--- a/arch/arm/mach-mxc91231/system.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This file is released under the GPLv2 or later.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/proc-fns.h>
-#include <mach/hardware.h>
-
-#include "crm_regs.h"
-
-#define WDOG_WCR		MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR)
-#define WDOG_WCR_OUT_ENABLE	(1 << 6)
-#define WDOG_WCR_ASSERT		(1 << 5)
-
-void mxc91231_power_off(void)
-{
-	u16 wcr;
-
-	wcr = __raw_readw(WDOG_WCR);
-	wcr |= WDOG_WCR_OUT_ENABLE;
-	wcr &= ~WDOG_WCR_ASSERT;
-	__raw_writew(wcr, WDOG_WCR);
-}
-
-void mxc91231_arch_reset(char mode, const char *cmd)
-{
-	u32 amcr;
-
-	/* Reset the AP using CRM */
-	amcr = __raw_readl(MXC_CRMAP_AMCR);
-	amcr &= ~MXC_CRMAP_AMCR_SW_AP;
-	__raw_writel(amcr, MXC_CRMAP_AMCR);
-
-	mdelay(10);
-	cpu_reset(0);
-}
-
-void mxc91231_prepare_idle(void)
-{
-	u32 crm_ctl;
-
-	/* Go to WAIT mode after WFI */
-	crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL);
-	crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1);
-	crm_ctl |=  MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE;
-	__raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL);
-}