ARM: dts: imx7d: move ARM platform peripherals inside soc node

Since we have a SoC level node we should make use of it and have
all nodes which are within the SoC, inside that node. This also
saves an extra interrupt-parent properties. While at it, also
order the Coresight nodes according to register addresses.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

2 files changed, 167 insertions, 166 deletions

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 51c13cbdffb7..3d77d95bbc9d 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -52,23 +52,25 @@
 		};
 	};
 
-	etm@3007d000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0x3007d000 0x1000>;
+	soc {
+		etm@3007d000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007d000 0x1000>;
 
-		/*
-		 * System will hang if added nosmp in kernel command line
-		 * without arm,primecell-periphid because amba bus try to
-		 * read id and core1 power off at this time.
-		 */
-		arm,primecell-periphid = <0xbb956>;
-		cpu = <&cpu1>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
+			/*
+			 * System will hang if added nosmp in kernel command line
+			 * without arm,primecell-periphid because amba bus try to
+			 * read id and core1 power off at this time.
+			 */
+			arm,primecell-periphid = <0xbb956>;
+			cpu = <&cpu1>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-		port {
-			etm1_out_port: endpoint {
-				remote-endpoint = <&ca_funnel_in_port1>;
+			port {
+				etm1_out_port: endpoint {
+					remote-endpoint = <&ca_funnel_in_port1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 1e90bdbe3a6e..d89587a97725 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -95,16 +95,6 @@
 		};
 	};
 
-	intc: interrupt-controller@31001000 {
-		compatible = "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x31001000 0x1000>,
-		      <0x31002000 0x1000>,
-		      <0x31004000 0x2000>,
-		      <0x31006000 0x2000>;
-	};
-
 	ckil: clock-cki {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -119,195 +109,204 @@
 		clock-output-names = "osc";
 	};
 
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
 		interrupt-parent = <&intc>;
-	};
+		ranges;
 
-	etr@30086000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0x30086000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
+		funnel@30041000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x30041000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
+
+			ca_funnel_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					ca_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+
+				/* funnel output port */
+				port@2 {
+					reg = <0>;
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
 
-		port {
-			etr_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
+				/* the other input ports are not connect to anything */
 			};
 		};
-	};
 
-	tpiu@30087000 {
-		compatible = "arm,coresight-tpiu", "arm,primecell";
-		reg = <0x30087000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
+		etm@3007c000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x3007c000 0x1000>;
+			cpu = <&cpu0>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-		port {
-			tpiu_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
+			port {
+				etm0_out_port: endpoint {
+					remote-endpoint = <&ca_funnel_in_port0>;
+				};
 			};
 		};
-	};
 
-	replicator {
-		/*
-		 * non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell"
-		 */
-		compatible = "arm,coresight-replicator";
+		funnel@30083000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x30083000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-			/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
+				/* funnel input ports */
+				port@0 {
+					reg = <0>;
+					hugo_funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
 				};
-			};
 
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&etr_in_port>;
+				port@1 {
+					reg = <1>;
+					hugo_funnel_in_port1: endpoint {
+						slave-mode; /* M4 input */
+					};
 				};
-			};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
-				replicator_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&etf_out_port>;
+				port@2 {
+					reg = <0>;
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
 				};
+
+				/* the other input ports are not connect to anything */
 			};
 		};
-	};
 
-	etf@30084000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0x30084000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
+		etf@30084000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30084000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-			port@0 {
-				reg = <0>;
-				etf_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&hugo_funnel_out_port0>;
+				port@0 {
+					reg = <0>;
+					etf_in_port: endpoint {
+						slave-mode;
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
 				};
-			};
 
-			port@1 {
-				reg = <0>;
-				etf_out_port: endpoint {
-					remote-endpoint = <&replicator_in_port0>;
+				port@1 {
+					reg = <0>;
+					etf_out_port: endpoint {
+						remote-endpoint = <&replicator_in_port0>;
+					};
 				};
 			};
 		};
-	};
 
-	funnel@30083000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0x30083000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
+		etr@30086000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x30086000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-			/* funnel input ports */
-			port@0 {
-				reg = <0>;
-				hugo_funnel_in_port0: endpoint {
+			port {
+				etr_in_port: endpoint {
 					slave-mode;
-					remote-endpoint = <&ca_funnel_out_port0>;
+					remote-endpoint = <&replicator_out_port1>;
 				};
 			};
+		};
 
-			port@1 {
-				reg = <1>;
-				hugo_funnel_in_port1: endpoint {
-					slave-mode; /* M4 input */
-				};
-			};
+		tpiu@30087000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x30087000 0x1000>;
+			clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+			clock-names = "apb_pclk";
 
-			port@2 {
-				reg = <0>;
-				hugo_funnel_out_port0: endpoint {
-					remote-endpoint = <&etf_in_port>;
+			port {
+				tpiu_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port1>;
 				};
 			};
-
-			/* the other input ports are not connect to anything */
 		};
-	};
 
-	funnel@30041000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0x30041000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
+		replicator {
+			/*
+			 * non-configurable replicators don't show up on the
+			 * AMBA bus.  As such no need to add "arm,primecell"
+			 */
+			compatible = "arm,coresight-replicator";
 
-		ca_funnel_ports: ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-			/* funnel input ports */
-			port@0 {
-				reg = <0>;
-				ca_funnel_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&etm0_out_port>;
+				/* replicator output ports */
+				port@0 {
+					reg = <0>;
+					replicator_out_port0: endpoint {
+						remote-endpoint = <&tpiu_in_port>;
+					};
 				};
-			};
 
-			/* funnel output port */
-			port@2 {
-				reg = <0>;
-				ca_funnel_out_port0: endpoint {
-					remote-endpoint = <&hugo_funnel_in_port0>;
+				port@1 {
+					reg = <1>;
+					replicator_out_port1: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
 				};
-			};
 
-			/* the other input ports are not connect to anything */
+				/* replicator input port */
+				port@2 {
+					reg = <0>;
+					replicator_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
 		};
-	};
 
-	etm@3007c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0x3007c000 0x1000>;
-		cpu = <&cpu0>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			etm0_out_port: endpoint {
-				remote-endpoint = <&ca_funnel_in_port0>;
-			};
+		intc: interrupt-controller@31001000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x31001000 0x1000>,
+			      <0x31002000 0x1000>,
+			      <0x31004000 0x2000>,
+			      <0x31006000 0x2000>;
 		};
-	};
 
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+				     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		};
 
 		aips1: aips-bus@30000000 {
 			compatible = "fsl,aips-bus", "simple-bus";