Merge tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux into next/dt

Pull "Broadcom devicetree changes for 4.12" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoCs Device Tree updates for
4.12, please pull the following:

- Rafal:

	* adds basic support for the Linksys EA9200, Linksys EA6300 V1, Linksys
	  EA9500, TP-Link Archer C5 V2 which are all based on BCM470x SoCs with
	  a bunch of BCM43602 radios.

	* updates the BCM5301X DTS and DTS include file and moves the serial
	  console parameters to the DTS include file since all BCM5301X that we have so
	  far are consistent in using the same UART. He also does the same for the
	  BCM53573 DTS.

	* makes some updates to the Tenda AC9 platform by describing its
	  PCIe controllers and endpoints in order to be able to represent GPIOs attached
	  to the on-chip Wi-Fi module. Once done, he adds the 2Ghz LED which is connected
	  to one of these GPIOs.

	* re-licenses the DTS files he created to the ISC license

	* removes the use of the non-existend "default-off" LED trigger in the
	  BCM53573 and BCM5301X DTS files

- Aditya adds missing Netgear R8000 LEDS and keys for WAN status LEDS and brightness

- Jon:
	* adds NAND controller Device Tree nodes to the BCM953012K reference board

  	* converts the BCM5301X SoC to use the recently introduced Broadcom QSPI controller
  	  Device Tree nodes.

	* fixes the GIC PPI interrupt flags that the kernel now
  	  reports about.

	* adds ARM TWD watchdog entries to the BCM5301X DTS include file
  	* adds I2C entries to the BCM5301X DTS include files.

	* disables i2c by default in the Northstar Plus DTS include file, and
	 ,enables it at the board level instead.

	* adds USB (OHCI & EHCI) Device Tree nodes to the Northstar Plus DTS
	  include files.

- Steven adds the mailbox (PDC) unit and the crytographic unit (SPU) to the
  Broadcom Northstar Plus SoC DTS include file. Steven also adds proper ethernet
  aliases to the BCM53012HR board since some bootloaders require that for MAC address
  patching.

- Eric adds the DSI and its corresponding clock nodes to the BCM283x DTS files
  but leaves them disabled by default (overlays should take care of enabling it)

- Boris adds support for HDMI audio and related DMA channels to the BCM283x SoCs

- Gerd adds support for the BCM2835 specific SDHCI controller to the BCM283x SoCs

- Rob fixes the iProc msi-controller name and unit address now that DTC can produce
  additional errors

* tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux: (27 commits)
  ARM: dts: bcm: fix msi-controller name and unit address
  ARM: dts: BCM53573: Specify serial console parameters
  ARM: dts: BCM5301X: Specify serial console params in dtsi files
  ARM: dts: NSP: Add crypto (SPU) to dtsi
  ARM: dts: NSP: Add mailbox (PDC) to NSP
  ARM: dts: BCM953012HR: Add ethernet aliases
  ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2
  ARM: dts: NSP: disable i2c DT entry by default
  ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree
  ARM: dts: BCM5301X: Add I2C support to the DT
  ARM: dts: BCM5301X: Add TWD WD Support to DT
  ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
  ARM: dts: bcm2835: add sdhost controller to devicetree
  ARM: dts: bcm283x: Add HDMI audio related properties
  ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger
  ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger
  ARM: dts: BCM5301X: Add missing Netgear R8000 LEDs and Keys
  ARM: dts: BCM5301X: Relicense DTS files I created to the ISC
  ARM: dts: bcm2835: Add the DSI module nodes and clocks.
  ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED
  ...

1 files changed, 5 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 47048c42d402..93a572936292 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
 	bcm4708-asus-rt-ac68u.dtb \
 	bcm4708-buffalo-wzr-1750dhp.dtb \
+	bcm4708-linksys-ea6300-v1.dtb \
 	bcm4708-luxul-xap-1510.dtb \
 	bcm4708-luxul-xwc-1000.dtb \
 	bcm4708-netgear-r6250.dtb \
@@ -87,17 +88,21 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47081-buffalo-wzr-900dhp.dtb \
 	bcm47081-luxul-xap-1410.dtb \
 	bcm47081-luxul-xwr-1200.dtb \
+	bcm47081-tplink-archer-c5-v2.dtb \
 	bcm4709-asus-rt-ac87u.dtb \
 	bcm4709-buffalo-wxr-1900dhp.dtb \
+	bcm4709-linksys-ea9200.dtb \
 	bcm4709-netgear-r7000.dtb \
 	bcm4709-netgear-r8000.dtb \
 	bcm4709-tplink-archer-c9-v1.dtb \
 	bcm47094-dlink-dir-885l.dtb \
+	bcm47094-linksys-panamera.dtb \
 	bcm47094-luxul-xwr-3100.dtb \
 	bcm47094-netgear-r8500.dtb \
 	bcm94708.dtb \
 	bcm94709.dtb \
 	bcm953012er.dtb \
+	bcm953012hr.dtb \
 	bcm953012k.dtb
 dtb-$(CONFIG_ARCH_BCM_53573) += \
 	bcm47189-tenda-ac9.dtb