Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input subsystem updates from Dmitry Torokhov:

 - a big update from Mauro converting input documentation to ReST format

 - Synaptics PS/2 is now aware of SMBus companion devices, which means
   that we can now use native RMI4 protocol to handle touchpads, instead
   of relying on legacy PS/2 mode.

 - we removed support from BMA180 accelerometer from input devices as it
   is now handled properly by IIO

 - update to TSC2007 to corretcly report pressure

 - other miscellaneous driver fixes.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits)
  Input: ar1021_i2c - use BIT to check for a bit
  Input: twl4030-pwrbutton - use input_set_capability() helper
  Input: twl4030-pwrbutton - use correct device for irq request
  Input: ar1021_i2c - enable touch mode during open
  Input: add uinput documentation
  dt-bindings: input: add bindings document for ar1021_i2c driver
  dt-bindings: input: rotary-encoder: fix typo
  Input: xen-kbdfront - add module parameter for setting resolution
  ARM: pxa/raumfeld: fix compile error in rotary controller resources
  Input: xpad - do not suggest writing to Dominic
  Input: xpad - don't use literal blocks inside footnotes
  Input: xpad - note that usb/devices is now at /sys/kernel/debug/
  Input: docs - freshen up introduction
  Input: docs - split input docs into kernel- and user-facing
  Input: docs - note that MT-A protocol is obsolete
  Input: docs - update joystick documentation a bit
  Input: docs - remove disclaimer/GPL notice
  Input: fix "Game console" heading level in joystick documentation
  Input: rotary-encoder - remove references to platform data from docs
  Input: move documentation for Amiga CD32
  ...

1 files changed, 409 insertions, 0 deletions

diff --git a/Documentation/input/event-codes.rst b/Documentation/input/event-codes.rst
new file mode 100644
index 000000000000..a8c0873beb95
--- /dev/null
+++ b/Documentation/input/event-codes.rst
@@ -0,0 +1,409 @@
+.. _input-event-codes:
+
+=================
+Input event codes
+=================
+
+
+The input protocol uses a map of types and codes to express input device values
+to userspace. This document describes the types and codes and how and when they
+may be used.
+
+A single hardware event generates multiple input events. Each input event
+contains the new value of a single data item. A special event type, EV_SYN, is
+used to separate input events into packets of input data changes occurring at
+the same moment in time. In the following, the term "event" refers to a single
+input event encompassing a type, code, and value.
+
+The input protocol is a stateful protocol. Events are emitted only when values
+of event codes have changed. However, the state is maintained within the Linux
+input subsystem; drivers do not need to maintain the state and may attempt to
+emit unchanged values without harm. Userspace may obtain the current state of
+event code values using the EVIOCG* ioctls defined in linux/input.h. The event
+reports supported by a device are also provided by sysfs in
+class/input/event*/device/capabilities/, and the properties of a device are
+provided in class/input/event*/device/properties.
+
+Event types
+===========
+
+Event types are groupings of codes under a logical input construct. Each
+type has a set of applicable codes to be used in generating events. See the
+Codes section for details on valid codes for each type.
+
+* EV_SYN:
+
+  - Used as markers to separate events. Events may be separated in time or in
+    space, such as with the multitouch protocol.
+
+* EV_KEY:
+
+  - Used to describe state changes of keyboards, buttons, or other key-like
+    devices.
+
+* EV_REL:
+
+  - Used to describe relative axis value changes, e.g. moving the mouse 5 units
+    to the left.
+
+* EV_ABS:
+
+  - Used to describe absolute axis value changes, e.g. describing the
+    coordinates of a touch on a touchscreen.
+
+* EV_MSC:
+
+  - Used to describe miscellaneous input data that do not fit into other types.
+
+* EV_SW:
+
+  - Used to describe binary state input switches.
+
+* EV_LED:
+
+  - Used to turn LEDs on devices on and off.
+
+* EV_SND:
+
+  - Used to output sound to devices.
+
+* EV_REP:
+
+  - Used for autorepeating devices.
+
+* EV_FF:
+
+  - Used to send force feedback commands to an input device.
+
+* EV_PWR:
+
+  - A special type for power button and switch input.
+
+* EV_FF_STATUS:
+
+  - Used to receive force feedback device status.
+
+Event codes
+===========
+
+Event codes define the precise type of event.
+
+EV_SYN
+------
+
+EV_SYN event values are undefined. Their usage is defined only by when they are
+sent in the evdev event stream.
+
+* SYN_REPORT:
+
+  - Used to synchronize and separate events into packets of input data changes
+    occurring at the same moment in time. For example, motion of a mouse may set
+    the REL_X and REL_Y values for one motion, then emit a SYN_REPORT. The next
+    motion will emit more REL_X and REL_Y values and send another SYN_REPORT.
+
+* SYN_CONFIG:
+
+  - TBD
+
+* SYN_MT_REPORT:
+
+  - Used to synchronize and separate touch events. See the
+    multi-touch-protocol.txt document for more information.
+
+* SYN_DROPPED:
+
+  - Used to indicate buffer overrun in the evdev client's event queue.
+    Client should ignore all events up to and including next SYN_REPORT
+    event and query the device (using EVIOCG* ioctls) to obtain its
+    current state.
+
+EV_KEY
+------
+
+EV_KEY events take the form KEY_<name> or BTN_<name>. For example, KEY_A is used
+to represent the 'A' key on a keyboard. When a key is depressed, an event with
+the key's code is emitted with value 1. When the key is released, an event is
+emitted with value 0. Some hardware send events when a key is repeated. These
+events have a value of 2. In general, KEY_<name> is used for keyboard keys, and
+BTN_<name> is used for other types of momentary switch events.
+
+A few EV_KEY codes have special meanings:
+
+* BTN_TOOL_<name>:
+
+  - These codes are used in conjunction with input trackpads, tablets, and
+    touchscreens. These devices may be used with fingers, pens, or other tools.
+    When an event occurs and a tool is used, the corresponding BTN_TOOL_<name>
+    code should be set to a value of 1. When the tool is no longer interacting
+    with the input device, the BTN_TOOL_<name> code should be reset to 0. All
+    trackpads, tablets, and touchscreens should use at least one BTN_TOOL_<name>
+    code when events are generated.
+
+* BTN_TOUCH:
+
+    BTN_TOUCH is used for touch contact. While an input tool is determined to be
+    within meaningful physical contact, the value of this property must be set
+    to 1. Meaningful physical contact may mean any contact, or it may mean
+    contact conditioned by an implementation defined property. For example, a
+    touchpad may set the value to 1 only when the touch pressure rises above a
+    certain value. BTN_TOUCH may be combined with BTN_TOOL_<name> codes. For
+    example, a pen tablet may set BTN_TOOL_PEN to 1 and BTN_TOUCH to 0 while the
+    pen is hovering over but not touching the tablet surface.
+
+Note: For appropriate function of the legacy mousedev emulation driver,
+BTN_TOUCH must be the first evdev code emitted in a synchronization frame.
+
+Note: Historically a touch device with BTN_TOOL_FINGER and BTN_TOUCH was
+interpreted as a touchpad by userspace, while a similar device without
+BTN_TOOL_FINGER was interpreted as a touchscreen. For backwards compatibility
+with current userspace it is recommended to follow this distinction. In the
+future, this distinction will be deprecated and the device properties ioctl
+EVIOCGPROP, defined in linux/input.h, will be used to convey the device type.
+
+* BTN_TOOL_FINGER, BTN_TOOL_DOUBLETAP, BTN_TOOL_TRIPLETAP, BTN_TOOL_QUADTAP:
+
+  - These codes denote one, two, three, and four finger interaction on a
+    trackpad or touchscreen. For example, if the user uses two fingers and moves
+    them on the touchpad in an effort to scroll content on screen,
+    BTN_TOOL_DOUBLETAP should be set to value 1 for the duration of the motion.
+    Note that all BTN_TOOL_<name> codes and the BTN_TOUCH code are orthogonal in
+    purpose. A trackpad event generated by finger touches should generate events
+    for one code from each group. At most only one of these BTN_TOOL_<name>
+    codes should have a value of 1 during any synchronization frame.
+
+Note: Historically some drivers emitted multiple of the finger count codes with
+a value of 1 in the same synchronization frame. This usage is deprecated.
+
+Note: In multitouch drivers, the input_mt_report_finger_count() function should
+be used to emit these codes. Please see multi-touch-protocol.txt for details.
+
+EV_REL
+------
+
+EV_REL events describe relative changes in a property. For example, a mouse may
+move to the left by a certain number of units, but its absolute position in
+space is unknown. If the absolute position is known, EV_ABS codes should be used
+instead of EV_REL codes.
+
+A few EV_REL codes have special meanings:
+
+* REL_WHEEL, REL_HWHEEL:
+
+  - These codes are used for vertical and horizontal scroll wheels,
+    respectively.
+
+EV_ABS
+------
+
+EV_ABS events describe absolute changes in a property. For example, a touchpad
+may emit coordinates for a touch location.
+
+A few EV_ABS codes have special meanings:
+
+* ABS_DISTANCE:
+
+  - Used to describe the distance of a tool from an interaction surface. This
+    event should only be emitted while the tool is hovering, meaning in close
+    proximity of the device and while the value of the BTN_TOUCH code is 0. If
+    the input device may be used freely in three dimensions, consider ABS_Z
+    instead.
+  - BTN_TOOL_<name> should be set to 1 when the tool comes into detectable
+    proximity and set to 0 when the tool leaves detectable proximity.
+    BTN_TOOL_<name> signals the type of tool that is currently detected by the
+    hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH.
+
+* ABS_MT_<name>:
+
+  - Used to describe multitouch input events. Please see
+    multi-touch-protocol.txt for details.
+
+EV_SW
+-----
+
+EV_SW events describe stateful binary switches. For example, the SW_LID code is
+used to denote when a laptop lid is closed.
+
+Upon binding to a device or resuming from suspend, a driver must report
+the current switch state. This ensures that the device, kernel, and userspace
+state is in sync.
+
+Upon resume, if the switch state is the same as before suspend, then the input
+subsystem will filter out the duplicate switch state reports. The driver does
+not need to keep the state of the switch at any time.
+
+EV_MSC
+------
+
+EV_MSC events are used for input and output events that do not fall under other
+categories.
+
+A few EV_MSC codes have special meaning:
+
+* MSC_TIMESTAMP:
+
+  - Used to report the number of microseconds since the last reset. This event
+    should be coded as an uint32 value, which is allowed to wrap around with
+    no special consequence. It is assumed that the time difference between two
+    consecutive events is reliable on a reasonable time scale (hours).
+    A reset to zero can happen, in which case the time since the last event is
+    unknown.  If the device does not provide this information, the driver must
+    not provide it to user space.
+
+EV_LED
+------
+
+EV_LED events are used for input and output to set and query the state of
+various LEDs on devices.
+
+EV_REP
+------
+
+EV_REP events are used for specifying autorepeating events.
+
+EV_SND
+------
+
+EV_SND events are used for sending sound commands to simple sound output
+devices.
+
+EV_FF
+-----
+
+EV_FF events are used to initialize a force feedback capable device and to cause
+such device to feedback.
+
+EV_PWR
+------
+
+EV_PWR events are a special type of event used specifically for power
+management. Its usage is not well defined. To be addressed later.
+
+Device properties
+=================
+
+Normally, userspace sets up an input device based on the data it emits,
+i.e., the event types. In the case of two devices emitting the same event
+types, additional information can be provided in the form of device
+properties.
+
+INPUT_PROP_DIRECT + INPUT_PROP_POINTER
+--------------------------------------
+
+The INPUT_PROP_DIRECT property indicates that device coordinates should be
+directly mapped to screen coordinates (not taking into account trivial
+transformations, such as scaling, flipping and rotating). Non-direct input
+devices require non-trivial transformation, such as absolute to relative
+transformation for touchpads. Typical direct input devices: touchscreens,
+drawing tablets; non-direct devices: touchpads, mice.
+
+The INPUT_PROP_POINTER property indicates that the device is not transposed
+on the screen and thus requires use of an on-screen pointer to trace user's
+movements.  Typical pointer devices: touchpads, tablets, mice; non-pointer
+device: touchscreen.
+
+If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is
+considered undefined and the device type should be deduced in the
+traditional way, using emitted event types.
+
+INPUT_PROP_BUTTONPAD
+--------------------
+
+For touchpads where the button is placed beneath the surface, such that
+pressing down on the pad causes a button click, this property should be
+set. Common in clickpad notebooks and macbooks from 2009 and onwards.
+
+Originally, the buttonpad property was coded into the bcm5974 driver
+version field under the name integrated button. For backwards
+compatibility, both methods need to be checked in userspace.
+
+INPUT_PROP_SEMI_MT
+------------------
+
+Some touchpads, most common between 2008 and 2011, can detect the presence
+of multiple contacts without resolving the individual positions; only the
+number of contacts and a rectangular shape is known. For such
+touchpads, the semi-mt property should be set.
+
+Depending on the device, the rectangle may enclose all touches, like a
+bounding box, or just some of them, for instance the two most recent
+touches. The diversity makes the rectangle of limited use, but some
+gestures can normally be extracted from it.
+
+If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT
+device.
+
+INPUT_PROP_TOPBUTTONPAD
+-----------------------
+
+Some laptops, most notably the Lenovo 40 series provide a trackstick
+device but do not have physical buttons associated with the trackstick
+device. Instead, the top area of the touchpad is marked to show
+visual/haptic areas for left, middle, right buttons intended to be used
+with the trackstick.
+
+If INPUT_PROP_TOPBUTTONPAD is set, userspace should emulate buttons
+accordingly. This property does not affect kernel behavior.
+The kernel does not provide button emulation for such devices but treats
+them as any other INPUT_PROP_BUTTONPAD device.
+
+INPUT_PROP_ACCELEROMETER
+------------------------
+
+Directional axes on this device (absolute and/or relative x, y, z) represent
+accelerometer data. Some devices also report gyroscope data, which devices
+can report through the rotational axes (absolute and/or relative rx, ry, rz).
+
+All other axes retain their meaning. A device must not mix
+regular directional axes and accelerometer axes on the same event node.
+
+Guidelines
+==========
+
+The guidelines below ensure proper single-touch and multi-finger functionality.
+For multi-touch functionality, see the multi-touch-protocol.txt document for
+more information.
+
+Mice
+----
+
+REL_{X,Y} must be reported when the mouse moves. BTN_LEFT must be used to report
+the primary button press. BTN_{MIDDLE,RIGHT,4,5,etc.} should be used to report
+further buttons of the device. REL_WHEEL and REL_HWHEEL should be used to report
+scroll wheel events where available.
+
+Touchscreens
+------------
+
+ABS_{X,Y} must be reported with the location of the touch. BTN_TOUCH must be
+used to report when a touch is active on the screen.
+BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch
+contact. BTN_TOOL_<name> events should be reported where possible.
+
+For new hardware, INPUT_PROP_DIRECT should be set.
+
+Trackpads
+---------
+
+Legacy trackpads that only provide relative position information must report
+events like mice described above.
+
+Trackpads that provide absolute touch position must report ABS_{X,Y} for the
+location of the touch. BTN_TOUCH should be used to report when a touch is active
+on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should
+be used to report the number of touches active on the trackpad.
+
+For new hardware, INPUT_PROP_POINTER should be set.
+
+Tablets
+-------
+
+BTN_TOOL_<name> events must be reported when a stylus or other tool is active on
+the tablet. ABS_{X,Y} must be reported with the location of the tool. BTN_TOUCH
+should be used to report when the tool is in contact with the tablet.
+BTN_{STYLUS,STYLUS2} should be used to report buttons on the tool itself. Any
+button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}.
+BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use
+meaningful buttons, like BTN_FORWARD, unless the button is labeled for that
+purpose on the device.
+
+For new hardware, both INPUT_PROP_DIRECT and INPUT_PROP_POINTER should be set.