Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/phy/marvell.c

Simple overlapping changes in drivers/net/phy/marvell.c

Signed-off-by: David S. Miller <davem@davemloft.net>

13 files changed, 142 insertions, 5 deletions

diff --git a/Documentation/devicetree/bindings/mailbox/mailbox.txt b/Documentation/devicetree/bindings/mailbox/mailbox.txt
new file mode 100644
index 000000000000..1a2cd3d266db
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/mailbox.txt
@@ -0,0 +1,38 @@
+* Generic Mailbox Controller and client driver bindings
+
+Generic binding to provide a way for Mailbox controller drivers to
+assign appropriate mailbox channel to client drivers.
+
+* Mailbox Controller
+
+Required property:
+- #mbox-cells: Must be at least 1. Number of cells in a mailbox
+		specifier.
+
+Example:
+	mailbox: mailbox {
+		...
+		#mbox-cells = <1>;
+	};
+
+
+* Mailbox Client
+
+Required property:
+- mboxes: List of phandle and mailbox channel specifiers.
+
+Optional property:
+- mbox-names: List of identifier strings for each mailbox channel
+		required by the client. The use of this property
+		is discouraged in favor of using index in list of
+		'mboxes' while requesting a mailbox. Instead the
+		platforms may define channel indices, in DT headers,
+		to something legible.
+
+Example:
+	pwr_cntrl: power {
+		...
+		mbox-names = "pwr-ctrl", "rpc";
+		mboxes = <&mailbox 0
+			&mailbox 1>;
+	};
diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
index 0f8487b88822..e77e167593db 100644
--- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
+++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt
@@ -11,3 +11,5 @@ Optional properties:
   are supported on the device.  Valid value for SMSC LAN91c111 are
   1, 2 or 4.  If it's omitted or invalid, the size would be 2 meaning
   16-bit access only.
+- power-gpios: GPIO to control the PWRDWN pin
+- reset-gpios: GPIO to control the RESET pin
diff --git a/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt
index 0bda229a6171..3899d6a557c1 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt
@@ -1,5 +1,20 @@
 Freescale FlexTimer Module (FTM) PWM controller
 
+The same FTM PWM device can have a different endianness on different SoCs. The
+device tree provides a property to describing this so that an operating system
+device driver can handle all variants of the device. Refer to the table below
+for the endianness of the FTM PWM block as integrated into the existing SoCs:
+
+	SoC     | FTM-PWM endianness
+	--------+-------------------
+	Vybrid  | LE
+	LS1     | BE
+	LS2     | LE
+
+Please see ../regmap/regmap.txt for more detail about how to specify endian
+modes in device tree.
+
+
 Required properties:
 - compatible: Should be "fsl,vf610-ftm-pwm".
 - reg: Physical base address and length of the controller's registers
@@ -16,7 +31,8 @@ Required properties:
 - pinctrl-names: Must contain a "default" entry.
 - pinctrl-NNN: One property must exist for each entry in pinctrl-names.
   See pinctrl/pinctrl-bindings.txt for details of the property values.
-
+- big-endian: Boolean property, required if the FTM PWM registers use a big-
+  endian rather than little-endian layout.
 
 Example:
 
@@ -32,4 +48,5 @@ pwm0: pwm@40038000 {
 			<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pwm0_1>;
+		big-endian;
 };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt
index d47d15a6a298..b8be3d09ee26 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt
@@ -7,8 +7,8 @@ Required properties:
    "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC
  - reg: physical base address and length of the controller's registers
  - clocks: phandle and clock specifier of the PWM reference clock
- - #pwm-cells: should be 2. See pwm.txt in this directory for a
-   description of the cell format.
+ - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.txt in this directory
+   for a description of the cell format.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt
index 955df60a118c..d556dcb8816b 100644
--- a/Documentation/devicetree/bindings/sound/sgtl5000.txt
+++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt
@@ -7,10 +7,20 @@ Required properties:
 
 - clocks : the clock provider of SYS_MCLK
 
+- VDDA-supply : the regulator provider of VDDA
+
+- VDDIO-supply: the regulator provider of VDDIO
+
+Optional properties:
+
+- VDDD-supply : the regulator provider of VDDD
+
 Example:
 
 codec: sgtl5000@0a {
 	compatible = "fsl,sgtl5000";
 	reg = <0x0a>;
 	clocks = <&clks 150>;
+	VDDA-supply = <&reg_3p3v>;
+	VDDIO-supply = <&reg_3p3v>;
 };
diff --git a/Documentation/devicetree/bindings/submitting-patches.txt b/Documentation/devicetree/bindings/submitting-patches.txt
index 042a0273b8ba..b7ba01ad1426 100644
--- a/Documentation/devicetree/bindings/submitting-patches.txt
+++ b/Documentation/devicetree/bindings/submitting-patches.txt
@@ -12,6 +12,9 @@ I. For patch submitters
 
        devicetree@vger.kernel.org
 
+  3) The Documentation/ portion of the patch should come in the series before
+     the code implementing the binding.
+
 II. For kernel maintainers
 
   1) If you aren't comfortable reviewing a given binding, reply to it and ask
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
index 1f0f67234a91..3c67bd50aa10 100644
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
@@ -1,7 +1,10 @@
 * Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
 
 Required properties:
-- compatible : "fsl,imx6q-thermal"
+- compatible : "fsl,imx6q-tempmon" for i.MX6Q, "fsl,imx6sx-tempmon" for i.MX6SX.
+  i.MX6SX has two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC,
+  when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature
+  is higher than panic threshold, system will auto reboot by SRC module.
 - fsl,tempmon : phandle pointer to system controller that contains TEMPMON
   control registers, e.g. ANATOP on imx6q.
 - fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index c7bb11be15a3..723999d73744 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -140,6 +140,7 @@ sitronix	Sitronix Technology Corporation
 smsc	Standard Microsystems Corporation
 snps 	Synopsys, Inc.
 solidrun	SolidRun
+sony	Sony Corporation
 spansion	Spansion Inc.
 st	STMicroelectronics
 ste	ST-Ericsson
diff --git a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
new file mode 100644
index 000000000000..c3a36ee45552
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt
@@ -0,0 +1,24 @@
+Zynq Watchdog Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible		: Should be "cdns,wdt-r1p2".
+- clocks		: This is pclk (APB clock).
+- interrupts		: This is wd_irq - watchdog timeout interrupt.
+- interrupt-parent	: Must be core interrupt controller.
+
+Optional properties
+- reset-on-timeout	: If this property exists, then a reset is done
+			  when watchdog times out.
+- timeout-sec		: Watchdog timeout value (in seconds).
+
+Example:
+	watchdog@f8005000 {
+		compatible = "cdns,wdt-r1p2";
+		clocks = <&clkc 45>;
+		interrupt-parent = <&intc>;
+		interrupts = <0 9 1>;
+		reg = <0xf8005000 0x1000>;
+		reset-on-timeout;
+		timeout-sec = <10>;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
index e52ba2da868c..8dab6fd024aa 100644
--- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt
@@ -7,7 +7,8 @@ Required properties:
 
 Optional property:
 - big-endian: If present the watchdog device's registers are implemented
-  in big endian mode, otherwise in little mode.
+  in big endian mode, otherwise in native mode(same with CPU), for more
+  detail please see: Documentation/devicetree/bindings/regmap/regmap.txt.
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/watchdog/meson6-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson6-wdt.txt
new file mode 100644
index 000000000000..9200fc2d508c
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/meson6-wdt.txt
@@ -0,0 +1,13 @@
+Meson SoCs Watchdog timer
+
+Required properties:
+
+- compatible : should be "amlogic,meson6-wdt"
+- reg : Specifies base physical address and size of the registers.
+
+Example:
+
+wdt: watchdog@c1109900 {
+	compatible = "amlogic,meson6-wdt";
+	reg = <0xc1109900 0x8>;
+};
diff --git a/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt b/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt
new file mode 100644
index 000000000000..4726924d034e
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/qcom-wdt.txt
@@ -0,0 +1,24 @@
+Qualcomm Krait Processor Sub-system (KPSS) Watchdog
+---------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+
+			"qcom,kpss-wdt-msm8960"
+			"qcom,kpss-wdt-apq8064"
+			"qcom,kpss-wdt-ipq8064"
+
+- reg : shall contain base register location and length
+- clocks : shall contain the input clock
+
+Optional properties :
+- timeout-sec : shall contain the default watchdog timeout in seconds,
+                if unset, the default timeout is 30 seconds
+
+Example:
+	watchdog@208a038 {
+		compatible = "qcom,kpss-wdt-ipq8064";
+		reg = <0x0208a038 0x40>;
+		clocks = <&sleep_clk>;
+		timeout-sec = <10>;
+	};
diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
index cfff37511aac..8f3d96af81d7 100644
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
@@ -9,6 +9,7 @@ Required properties:
 	(a) "samsung,s3c2410-wdt" for Exynos4 and previous SoCs
 	(b) "samsung,exynos5250-wdt" for Exynos5250
 	(c) "samsung,exynos5420-wdt" for Exynos5420
+	(c) "samsung,exynos7-wdt" for Exynos7
 
 - reg : base physical address of the controller and length of memory mapped
 	region.