diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2018-04-04 17:55:35 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2018-04-04 17:55:35 -0700 |
commit | ac9053d2dcb9e8c3fa35ce458dfca8fddc141680 (patch) | |
tree | 3ffa30d58dac22ee0a80e2dd32f41b71da91132b /Documentation/devicetree/bindings | |
parent | f9ca6a561d40115696a54f16085c4edb17effc74 (diff) | |
parent | 5267c5e09c25e2ee6242b37833a9bdf9d97f54a2 (diff) | |
download | blackbird-obmc-linux-ac9053d2dcb9e8c3fa35ce458dfca8fddc141680.tar.gz blackbird-obmc-linux-ac9053d2dcb9e8c3fa35ce458dfca8fddc141680.zip |
Merge tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big set of USB and PHY driver patches for 4.17-rc1.
Lots of USB typeC work happened this round, with code moving from the
staging directory into the "real" part of the kernel, as well as new
infrastructure being added to be able to handle the different types of
"roles" that typeC requires.
There is also the normal huge set of USB gadget controller and driver
updates, along with XHCI changes, and a raft of other tiny fixes all
over the USB tree. And the PHY driver updates are merged in here as
well as they interacted with the USB drivers in some places.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (250 commits)
Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870"
usb: musb: gadget: misplaced out of bounds check
usb: chipidea: imx: Fix ULPI on imx53
usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag
usb: chipidea: usbmisc: small clean up
usb: chipidea: usbmisc: evdo can be set e/o reset
usb: chipidea: usbmisc: evdo is only specific to OTG port
USB: serial: ftdi_sio: add Id for Physik Instrumente E-870
usb: dwc3: gadget: never call ->complete() from ->ep_queue()
usb: gadget: udc: core: update usb_ep_queue() documentation
usb: host: Remove the deprecated ATH79 USB host config options
usb: roles: Fix return value check in intel_xhci_usb_probe()
USB: gadget: f_midi: fixing a possible double-free in f_midi
usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks
usb: core: Copy parameter string correctly and remove superfluous null check
USB: announce bcdDevice as well as idVendor, idProduct.
USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
usb: hub: Reduce warning to notice on power loss
USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
USB: serial: cp210x: add ELDAT Easywave RX09 id
...
Diffstat (limited to 'Documentation/devicetree/bindings')
23 files changed, 408 insertions, 34 deletions
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index 7111fbc82a4e..199cd36fe1ba 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -75,6 +75,29 @@ Example: }; ----------------------------------------------------------------------- +Hisilicon Hi3798CV200 Peripheral Controller + +The Hi3798CV200 Peripheral Controller controls peripherals, queries +their status, and configures some functions of peripherals. + +Required properties: +- compatible: Should contain "hisilicon,hi3798cv200-perictrl", "syscon" + and "simple-mfd". +- reg: Register address and size of Peripheral Controller. +- #address-cells: Should be 1. +- #size-cells: Should be 1. + +Examples: + + perictrl: peripheral-controller@8a20000 { + compatible = "hisilicon,hi3798cv200-perictrl", "syscon", + "simple-mfd"; + reg = <0x8a20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; + +----------------------------------------------------------------------- Hisilicon Hi6220 system controller Required properties: diff --git a/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt index a105494a0fc9..b84a02ebffdf 100644 --- a/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt +++ b/Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt @@ -6,6 +6,10 @@ Required properties: - #phys-cells: must be 0 (see phy-bindings.txt in this directory) Optional properties: +- clocks: a phandle to the clock of this PHY +- clock-names: must be "phy" +- resets: a phandle to the reset line of this PHY +- reset-names: must be "phy" - phy-supply: see phy-bindings.txt in this directory diff --git a/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt b/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt new file mode 100644 index 000000000000..114947e1de3d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt @@ -0,0 +1,31 @@ +* Amlogic Meson GXL and GXM USB3 PHY and OTG detection binding + +Required properties: +- compatible: Should be "amlogic,meson-gxl-usb3-phy" +- #phys-cells: must be 0 (see phy-bindings.txt in this directory) +- reg: The base address and length of the registers +- interrupts: the interrupt specifier for the OTG detection +- clocks: phandles to the clocks for + - the USB3 PHY + - and peripheral mode/OTG detection +- clock-names: must contain "phy" and "peripheral" +- resets: phandle to the reset lines for: + - the USB3 PHY and + - peripheral mode/OTG detection +- reset-names: must contain "phy" and "peripheral" + +Optional properties: +- phy-supply: see phy-bindings.txt in this directory + + +Example: + usb3_phy0: phy@78080 { + compatible = "amlogic,meson-gxl-usb3-phy"; + #phy-cells = <0>; + reg = <0x0 0x78080 0x0 0x20>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB_OTG>, <&clkc_AO CLKID_AO_CEC_32K>; + clock-names = "phy", "peripheral"; + resets = <&reset RESET_USB_OTG>, <&reset RESET_USB_OTG>; + reset-names = "phy", "peripheral"; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt new file mode 100644 index 000000000000..17b0c761370a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-hi3798cv200-combphy.txt @@ -0,0 +1,59 @@ +HiSilicon STB PCIE/SATA/USB3 PHY + +Required properties: +- compatible: Should be "hisilicon,hi3798cv200-combphy" +- reg: Should be the address space for COMBPHY configuration and state + registers in peripheral controller, e.g. PERI_COMBPHY0_CFG and + PERI_COMBPHY0_STATE for COMBPHY0 Hi3798CV200 SoC. +- #phy-cells: Should be 1. The cell number is used to select the phy mode + as defined in <dt-bindings/phy/phy.h>. +- clocks: The phandle to clock provider and clock specifier pair. +- resets: The phandle to reset controller and reset specifier pair. + +Refer to phy/phy-bindings.txt for the generic PHY binding properties. + +Optional properties: +- hisilicon,fixed-mode: If the phy device doesn't support mode select + but a fixed mode setting, the property should be present to specify + the particular mode. +- hisilicon,mode-select-bits: If the phy device support mode select, + this property should be present to specify the register bits in + peripheral controller, as a 3 integers tuple: + <register_offset bit_shift bit_mask>. + +Notes: +- Between hisilicon,fixed-mode and hisilicon,mode-select-bits, one and only + one of them should be present. +- The device node should be a child of peripheral controller that contains + COMBPHY configuration/state and PERI_CTRL register used to select PHY mode. + Refer to arm/hisilicon/hisilicon.txt for the parent peripheral controller + bindings. + +Examples: + +perictrl: peripheral-controller@8a20000 { + compatible = "hisilicon,hi3798cv200-perictrl", "syscon", + "simple-mfd"; + reg = <0x8a20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8a20000 0x1000>; + + combphy0: phy@850 { + compatible = "hisilicon,hi3798cv200-combphy"; + reg = <0x850 0x8>; + #phy-cells = <1>; + clocks = <&crg HISTB_COMBPHY0_CLK>; + resets = <&crg 0x188 4>; + hisilicon,fixed-mode = <PHY_TYPE_USB3>; + }; + + combphy1: phy@858 { + compatible = "hisilicon,hi3798cv200-combphy"; + reg = <0x858 0x8>; + #phy-cells = <1>; + clocks = <&crg HISTB_COMBPHY1_CLK>; + resets = <&crg 0x188 12>; + hisilicon,mode-select-bits = <0x0008 11 (0x3 << 11)>; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt new file mode 100644 index 000000000000..0d70c8341095 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-hisi-inno-usb2.txt @@ -0,0 +1,71 @@ +Device tree bindings for HiSilicon INNO USB2 PHY + +Required properties: +- compatible: Should be one of the following strings: + "hisilicon,inno-usb2-phy", + "hisilicon,hi3798cv200-usb2-phy". +- reg: Should be the address space for PHY configuration register in peripheral + controller, e.g. PERI_USB0 for USB 2.0 PHY01 on Hi3798CV200 SoC. +- clocks: The phandle and clock specifier pair for INNO USB2 PHY device + reference clock. +- resets: The phandle and reset specifier pair for INNO USB2 PHY device reset + signal. +- #address-cells: Must be 1. +- #size-cells: Must be 0. + +The INNO USB2 PHY device should be a child node of peripheral controller that +contains the PHY configuration register, and each device suppports up to 2 PHY +ports which are represented as child nodes of INNO USB2 PHY device. + +Required properties for PHY port node: +- reg: The PHY port instance number. +- #phy-cells: Defined by generic PHY bindings. Must be 0. +- resets: The phandle and reset specifier pair for PHY port reset signal. + +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + +perictrl: peripheral-controller@8a20000 { + compatible = "hisilicon,hi3798cv200-perictrl", "simple-mfd"; + reg = <0x8a20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x8a20000 0x1000>; + + usb2_phy1: usb2-phy@120 { + compatible = "hisilicon,hi3798cv200-usb2-phy"; + reg = <0x120 0x4>; + clocks = <&crg HISTB_USB2_PHY1_REF_CLK>; + resets = <&crg 0xbc 4>; + #address-cells = <1>; + #size-cells = <0>; + + usb2_phy1_port0: phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&crg 0xbc 8>; + }; + + usb2_phy1_port1: phy@1 { + reg = <1>; + #phy-cells = <0>; + resets = <&crg 0xbc 9>; + }; + }; + + usb2_phy2: usb2-phy@124 { + compatible = "hisilicon,hi3798cv200-usb2-phy"; + reg = <0x124 0x4>; + clocks = <&crg HISTB_USB2_PHY2_REF_CLK>; + resets = <&crg 0xbc 6>; + #address-cells = <1>; + #size-cells = <0>; + + usb2_phy2_port0: phy@0 { + reg = <0>; + #phy-cells = <0>; + resets = <&crg 0xbc 10>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt b/Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt new file mode 100644 index 000000000000..29427d4f047a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-mapphone-mdm6600.txt @@ -0,0 +1,29 @@ +Device tree binding documentation for Motorola Mapphone MDM6600 USB PHY + +Required properties: +- compatible Must be "motorola,mapphone-mdm6600" +- enable-gpios GPIO to enable the USB PHY +- power-gpios GPIO to power on the device +- reset-gpios GPIO to reset the device +- motorola,mode-gpios Two GPIOs to configure MDM6600 USB start-up mode for + normal mode versus USB flashing mode +- motorola,cmd-gpios Three GPIOs to control the power state of the MDM6600 +- motorola,status-gpios Three GPIOs to read the power state of the MDM6600 + +Example: + +usb-phy { + compatible = "motorola,mapphone-mdm6600"; + enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; + power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>, + <&gpio5 21 GPIO_ACTIVE_HIGH>; + motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>, + <&gpio4 8 GPIO_ACTIVE_HIGH>, + <&gpio5 14 GPIO_ACTIVE_HIGH>; + motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>, + <&gpio2 21 GPIO_ACTIVE_HIGH>, + <&gpio2 23 GPIO_ACTIVE_HIGH>; + #phy-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt index 41e09ed2ca70..0d34b2b4a6b7 100644 --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt +++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt @@ -27,6 +27,10 @@ Optional properties (controller (parent) node): - reg : offset and length of register shared by multiple ports, exclude port's private register. It is needed on mt2701 and mt8173, but not on mt2712. + - mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate + calibrate + - mediatek,src-coef : coefficient for slew rate calibrate, depends on + SoC process Required properties (port (child) node): - reg : address and length of the register set for the port. diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt index 6ea867e3176f..960da7fcaa9e 100644 --- a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt @@ -14,25 +14,9 @@ Required properties: - resets : a list of phandle + reset specifier pairs - reset-names : string reset name, must be: "uphy", "uphy-pipe", "uphy-tcphy" - - extcon : extcon specifier for the Power Delivery -Note, there are 2 type-c phys for RK3399, and they are almost identical, except -these registers(description below), every register node contains 3 sections: -offset, enable bit, write mask bit. - - rockchip,typec-conn-dir : the register of type-c connector direction, - for type-c phy0, it must be <0xe580 0 16>; - for type-c phy1, it must be <0xe58c 0 16>; - - rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 enable - control. - for type-c phy0, it must be <0xe580 3 19>; - for type-c phy1, it must be <0xe58c 3 19>; - - rockchip,external-psm : the register of type-c phy external psm clock - selection. - for type-c phy0, it must be <0xe588 14 30>; - for type-c phy1, it must be <0xe594 14 30>; - - rockchip,pipe-status : the register of type-c phy pipe status. - for type-c phy0, it must be <0xe5c0 0 0>; - for type-c phy1, it must be <0xe5c0 16 16>; +Optional properties: + - extcon : extcon specifier for the Power Delivery Required nodes : a sub-node is required for each port the phy provides. The sub-node name is used to identify dp or usb3 port, @@ -43,6 +27,13 @@ Required nodes : a sub-node is required for each port the phy provides. Required properties (port (child) node): - #phy-cells : must be 0, See ./phy-bindings.txt for details. +Deprecated properties, do not use in new device tree sources, these +properties are determined by the compatible value: + - rockchip,typec-conn-dir + - rockchip,usb3tousb2-en + - rockchip,external-psm + - rockchip,pipe-status + Example: tcphy0: phy@ff7c0000 { compatible = "rockchip,rk3399-typec-phy"; @@ -58,10 +49,6 @@ Example: <&cru SRST_UPHY0_PIPE_L00>, <&cru SRST_P_UPHY0_TCPHY>; reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; - rockchip,typec-conn-dir = <0xe580 0 16>; - rockchip,usb3tousb2-en = <0xe580 3 19>; - rockchip,external-psm = <0xe588 14 30>; - rockchip,pipe-status = <0xe5c0 0 0>; tcphy0_dp: dp-port { #phy-cells = <0>; @@ -86,10 +73,6 @@ Example: <&cru SRST_UPHY1_PIPE_L00>, <&cru SRST_P_UPHY1_TCPHY>; reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; - rockchip,typec-conn-dir = <0xe58c 0 16>; - rockchip,usb3tousb2-en = <0xe58c 3 19>; - rockchip,external-psm = <0xe594 14 30>; - rockchip,pipe-status = <0xe5c0 16 16>; tcphy1_dp: dp-port { #phy-cells = <0>; diff --git a/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt new file mode 100644 index 000000000000..725ae71ae653 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt @@ -0,0 +1,73 @@ +STMicroelectronics STM32 USB HS PHY controller + +The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI +switch. It controls PHY configuration and status, and the UTMI+ switch that +selects either OTG or HOST controller for the second PHY port. It also sets +PLL configuration. + +USBPHYC + |_ PLL + | + |_ PHY port#1 _________________ HOST controller + | _ | + | / 1|________________| + |_ PHY port#2 ----| |________________ + | \_0| | + |_ UTMI switch_______| OTG controller + + +Phy provider node +================= + +Required properties: +- compatible: must be "st,stm32mp1-usbphyc" +- reg: address and length of the usb phy control register set +- clocks: phandle + clock specifier for the PLL phy clock +- #address-cells: number of address cells for phys sub-nodes, must be <1> +- #size-cells: number of size cells for phys sub-nodes, must be <0> + +Optional properties: +- assigned-clocks: phandle + clock specifier for the PLL phy clock +- assigned-clock-parents: the PLL phy clock parent +- resets: phandle + reset specifier + +Required nodes: one sub-node per port the controller provides. + +Phy sub-nodes +============== + +Required properties: +- reg: phy port index +- phy-supply: phandle to the regulator providing 3V3 power to the PHY, + see phy-bindings.txt in the same directory. +- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY +- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY +- #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY + port#1 and must be <1> for PHY port#2, to select USB controller + + +Example: + usbphyc: usb-phy@5a006000 { + compatible = "st,stm32mp1-usbphyc"; + reg = <0x5a006000 0x1000>; + clocks = <&rcc_clk USBPHY_K>; + resets = <&rcc_rst USBPHY_R>; + #address-cells = <1>; + #size-cells = <0>; + + usbphyc_port0: usb-phy@0 { + reg = <0>; + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18> + #phy-cells = <0>; + }; + + usbphyc_port1: usb-phy@1 { + reg = <1>; + phy-supply = <&vdd_usb>; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18> + #phy-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt index b6a9f2b92bab..dcf1b8f691d5 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt @@ -8,7 +8,8 @@ Required properties: - compatible: compatible list, contains: "qcom,ipq8074-qmp-pcie-phy" for PCIe phy on IPQ8074 "qcom,msm8996-qmp-pcie-phy" for 14nm PCIe phy on msm8996, - "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996. + "qcom,msm8996-qmp-usb3-phy" for 14nm USB3 phy on msm8996, + "qcom,qmp-v3-usb3-phy" for USB3 QMP V3 phy. - reg: offset and length of register set for PHY's common serdes block. @@ -25,10 +26,13 @@ Required properties: - clock-names: "cfg_ahb" for phy config clock, "aux" for phy aux clock, "ref" for 19.2 MHz ref clk, + "com_aux" for phy common block aux clock, For "qcom,msm8996-qmp-pcie-phy" must contain: "aux", "cfg_ahb", "ref". For "qcom,msm8996-qmp-usb3-phy" must contain: "aux", "cfg_ahb", "ref". + For "qcom,qmp-v3-usb3-phy" must contain: + "aux", "cfg_ahb", "ref", "com_aux". - resets: a list of phandles and reset controller specifier pairs, one for each entry in reset-names. diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt index aa0fcb05acb3..42c97426836e 100644 --- a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt @@ -4,7 +4,10 @@ Qualcomm QUSB2 phy controller QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. Required properties: - - compatible: compatible list, contains "qcom,msm8996-qusb2-phy". + - compatible: compatible list, contains + "qcom,msm8996-qusb2-phy" for 14nm PHY on msm8996, + "qcom,qusb2-v2-phy" for QUSB2 V2 PHY. + - reg: offset and length of the PHY register set. - #phy-cells: must be 0. diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index 99b651b33110..dbd137c079e2 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -8,6 +8,8 @@ Required properties: SoC. "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796 SoC. + "renesas,usb2-phy-r8a77965" if the device is a part of an + R8A77965 SoC. "renesas,usb2-phy-r8a77995" if the device is a part of an R8A77995 SoC. "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device. diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt index f94cea48f6b1..47dd296ecead 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb3.txt @@ -11,6 +11,8 @@ Required properties: SoC. "renesas,r8a7796-usb3-phy" if the device is a part of an R8A7796 SoC. + "renesas,r8a77965-usb3-phy" if the device is a part of an + R8A77965 SoC. "renesas,rcar-gen3-usb3-phy" for a generic R-Car Gen3 compatible device. diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index c1ce5a0a652e..07ca4ec4a745 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -11,6 +11,7 @@ Required properties: * allwinner,sun8i-a33-usb-phy * allwinner,sun8i-a83t-usb-phy * allwinner,sun8i-h3-usb-phy + * allwinner,sun8i-r40-usb-phy * allwinner,sun8i-v3s-usb-phy * allwinner,sun50i-a64-usb-phy - reg : a list of offset + length pairs diff --git a/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt new file mode 100644 index 000000000000..9a8b631904fd --- /dev/null +++ b/Documentation/devicetree/bindings/usb/amlogic,dwc3.txt @@ -0,0 +1,42 @@ +Amlogic Meson GX DWC3 USB SoC controller + +Required properties: +- compatible: depending on the SoC this should contain one of: + * amlogic,meson-axg-dwc3 + * amlogic,meson-gxl-dwc3 +- clocks: a handle for the "USB general" clock +- clock-names: must be "usb_general" +- resets: a handle for the shared "USB OTG" reset line +- reset-names: must be "usb_otg" + +Required child node: +A child node must exist to represent the core DWC3 IP block. The name of +the node is not important. The content of the node is defined in dwc3.txt. + +PHY documentation is provided in the following places: +- Documentation/devicetree/bindings/phy/meson-gxl-usb2-phy.txt +- Documentation/devicetree/bindings/phy/meson-gxl-usb3-phy.txt + +Example device nodes: + usb0: usb@ff500000 { + compatible = "amlogic,meson-axg-dwc3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc CLKID_USB>; + clock-names = "usb_general"; + resets = <&reset RESET_USB_OTG>; + reset-names = "usb_otg"; + + dwc3: dwc3@ff500000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff500000 0x0 0x100000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk; + phys = <&usb3_phy>, <&usb2_phy0>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 44e8bab159ad..0dbd3083e7dd 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -57,6 +57,22 @@ Optional properties: - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ register for post-silicon frame length adjustment when the fladj_30mhz_sdbnd signal is invalid or incorrect. + - snps,rx-thr-num-pkt-prd: periodic ESS RX packet threshold count - host mode + only. Set this and rx-max-burst-prd to a valid, + non-zero value 1-16 (DWC_usb31 programming guide + section 1.2.4) to enable periodic ESS RX threshold. + - snps,rx-max-burst-prd: max periodic ESS RX burst size - host mode only. Set + this and rx-thr-num-pkt-prd to a valid, non-zero value + 1-16 (DWC_usb31 programming guide section 1.2.4) to + enable periodic ESS RX threshold. + - snps,tx-thr-num-pkt-prd: periodic ESS TX packet threshold count - host mode + only. Set this and tx-max-burst-prd to a valid, + non-zero value 1-16 (DWC_usb31 programming guide + section 1.2.3) to enable periodic ESS TX threshold. + - snps,tx-max-burst-prd: max periodic ESS TX burst size - host mode only. Set + this and tx-thr-num-pkt-prd to a valid, non-zero value + 1-16 (DWC_usb31 programming guide section 1.2.3) to + enable periodic ESS TX threshold. - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated. diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt index 88d9f4a4b280..266c2d917a28 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt @@ -32,7 +32,7 @@ Required properties: "mcu_ck": mcu_bus clock for register access, "dma_ck": dma_bus clock for data transfer by DMA - - phys : a list of phandle + phy specifier pairs + - phys : see usb-hcd.txt in the current directory Optional properties: - wakeup-source : enable USB remote wakeup; @@ -52,6 +52,9 @@ Optional properties: See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - imod-interval-ns: default interrupt moderation interval is 5000ns +additionally the properties from usb-hcd.txt (in the current directory) are +supported. + Example: usb30: usb@11270000 { compatible = "mediatek,mt8173-xhci"; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index d589a1ef96a1..3382b5cb471d 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -17,7 +17,7 @@ Required properties: - clock-names : must contain "sys_ck" for clock of controller, the following clocks are optional: "ref_ck", "mcu_ck" and "dam_ck"; - - phys : a list of phandle + phy specifier pairs + - phys : see usb-hcd.txt in the current directory - dr_mode : should be one of "host", "peripheral" or "otg", refer to usb/generic.txt @@ -53,6 +53,9 @@ Optional properties: - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, bit1 for u3port1, ... etc; +additionally the properties from usb-hcd.txt (in the current directory) are +supported. + Sub-nodes: The xhci should be added as subnode to mtu3 as shown in the following example if host mode is enabled. The DT binding details of xhci can be found in: diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt index 3efde12b5d68..0f1b75386207 100644 --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt @@ -16,10 +16,12 @@ Optional properties: - has-transaction-translator : boolean, set this if EHCI have a Transaction Translator built into the root hub. - clocks : a list of phandle + clock specifier pairs - - phys : phandle + phy specifier pair - - phy-names : "usb" + - phys : see usb-hcd.txt in the current directory - resets : phandle + reset specifier pair +additionally the properties from usb-hcd.txt (in the current directory) are +supported. + Example (Sequoia 440EPx): ehci@e0000300 { compatible = "ibm,usb-ehci-440epx", "usb-ehci"; diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.txt b/Documentation/devicetree/bindings/usb/usb-hcd.txt new file mode 100644 index 000000000000..50529b838c9c --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-hcd.txt @@ -0,0 +1,9 @@ +Generic USB HCD (Host Controller Device) Properties + +Optional properties: +- phys: a list of all USB PHYs on this HCD + +Example: + &usb1 { + phys = <&usb2_phy1>, <&usb3_phy1>; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt index 09e70c875bc6..a8d2103d1f3d 100644 --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt @@ -13,10 +13,12 @@ Optional properties: - remote-wakeup-connected: remote wakeup is wired on the platform - num-ports : u32, to override the detected port count - clocks : a list of phandle + clock specifier pairs -- phys : phandle + phy specifier pair -- phy-names : "usb" +- phys : see usb-hcd.txt in the current directory - resets : a list of phandle + reset specifier pairs +additionally the properties from usb-hcd.txt (in the current directory) are +supported. + Example: ohci0: usb@1c14400 { diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.txt b/Documentation/devicetree/bindings/usb/usb-uhci.txt index 298133416c97..cc2e6f7d602e 100644 --- a/Documentation/devicetree/bindings/usb/usb-uhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-uhci.txt @@ -6,6 +6,9 @@ Required properties: - reg : Should contain 1 register ranges(address and length) - interrupts : UHCI controller interrupt +additionally the properties from usb-hcd.txt (in the current directory) are +supported. + Example: uhci@d8007b00 { diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 1651483a7048..c4c00dff4b56 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -33,6 +33,11 @@ Optional properties: - usb3-lpm-capable: determines if platform is USB3 LPM capable - quirk-broken-port-ped: set if the controller has broken port disable mechanism - imod-interval-ns: default interrupt moderation interval is 5000ns + - phys : see usb-hcd.txt in the current directory + +additionally the properties from usb-hcd.txt (in the current directory) are +supported. + Example: usb@f0931000 { |