backlight: lp855x: Add enable regulator

The LP8556 datasheet describes an EN/VDDIO input, which serves "both as
a chip enable and as a power supply reference for PWM, SDA, and SCL
inputs." The LP8556 that I'm testing doesn't respond properly if I try
to talk I2C to it too quickly after enabling VDDIO, and the LP8555
datasheet mentions a t_RESPONSE delay of up to 1 millisecond.

Support this EN/VDDIO by adding a regulator property to the binding;
enabling this regulator at probe time; and sleeping for 1 to 2ms, if the
EN/VDDIO regulator was provided.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Milo Kim <milo.kim@ti.com>
Reviewed-by: Stephen Barber <smbarber@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

1 files changed, 2 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
index 0a3ecbc3a1b9..88f56641fc28 100644
--- a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
+++ b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
@@ -13,6 +13,7 @@ Optional properties:
   - rom-addr: Register address of ROM area to be updated (u8)
   - rom-val: Register value to be updated (u8)
   - power-supply: Regulator which controls the 3V rail
+  - enable-supply: Regulator which controls the EN/VDDIO input
 
 Example:
 
@@ -57,6 +58,7 @@ Example:
 	backlight@2c {
 		compatible = "ti,lp8557";
 		reg = <0x2c>;
+		enable-supply = <&backlight_vddio>;
 		power-supply = <&backlight_vdd>;
 
 		dev-ctrl = /bits/ 8 <0x41>;