ARM: integrator: core module registers from compatible strings

This augments the core machine code for the Integrator platforms
to get their references to the core module device nodes by
using compatible strings instead of predefined node names
and rename the CP syscon node to be simply "syscon".

Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 17 insertions, 13 deletions

diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index 0ebf3d94e8bf..5fac246a9530 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -19,18 +19,22 @@ Required nodes:
   - regs: the location and size of the core module registers, one
     range of 0x200 bytes.
 
-- cpcon/syscon: the root node the Integrator/CP must have a /cpcon
-  node pointing to the CP control registers, and the Integrator/AP
-  must have a /syscon node pointing to the Integrator/AP system
-  controller. The AP syscon node must include the logical module
-  interrupts.
-
-In the root node the Integrator/CP must have a /cpcon node pointing
-to the CP control registers, and the Integrator/AP must have a
-/syscon node pointing to the Integrator/AP system controller.
-The AP syscon node must include the logic module interrupts, stated
-in order of module instance <module 0, module 1, module 2 ...>
-example:
+- syscon: the root node of the Integrator platforms must have a
+  system controller node pointong to the control registers,
+  with the compatible string
+  "arm,integrator-ap-syscon"
+  "arm,integrator-cp-syscon"
+  respectively.
+
+  Required properties for the system controller:
+  - regs: the location and size of the system controller registers,
+    one range of 0x100 bytes.
+
+  Required properties for the AP system controller:
+  - interrupts: the AP syscon node must include the logical module
+    interrupts, stated in order of module instance <module 0>,
+    <module 1>, <module 2> ... for the CP system controller this
+    is not required not of any use.
 
 /dts-v1/;
 /include/ "integrator.dtsi"
@@ -45,7 +49,7 @@ example:
 	};
 
 	syscon {
-		/* AP system controller registers */
+		compatible = "arm,integrator-ap-syscon";
 		reg = <0x11000000 0x100>;
 		interrupt-parent = <&pic>;
 		/* These are the logic module IRQs */