Merge tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.15:

  Core:
   - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior
   - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V
   - Add GPIO descriptor based slot-gpio card detect API

  Drivers:
   - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c
   - mmci: Support HW busy detection on ux500
   - omap: Support MMC_ERASE
   - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23
   - rtsx: Support pre-req/post-req async
   - sdhci: Add support for Realtek RTS5250 controllers
   - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect
   - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support
   - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs"

* tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits)
  mmc: sdhci-acpi: Intel SDIO has broken card detect
  mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller
  mmc: sdhci-msm: Add platform_execute_tuning implementation
  mmc: sdhci-msm: Initial support for Qualcomm chipsets
  mmc: sdhci-msm: Qualcomm SDHCI binding documentation
  sdhci: only reprogram retuning timer when flag is set
  mmc: rename ARCH_BCM to ARCH_BCM_MOBILE
  mmc: sdhci: Allow for irq being shared
  mmc: sdhci-acpi: Add device id 80860F16
  mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14
  mmc: slot-gpio: Add GPIO descriptor based CD GPIO API
  mmc: slot-gpio: Split out CD IRQ request into a separate function
  mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers
  Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform"
  mmc: sdhci-spear: use generic card detection gpio support
  mmc: sdhci-spear: remove support for power gpio
  mmc: sdhci-spear: simplify resource handling
  mmc: sdhci-spear: fix platform_data usage
  mmc: sdhci-spear: fix error handling paths for DT
  mmc: sdhci-bcm-kona: fix build errors when built-in
  ...

63 files changed, 2577 insertions, 1166 deletions

diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 458b57f199af..9dce540771fb 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -26,9 +26,18 @@ Optional properties:
   this system, even if the controller claims it is.
 - cap-sd-highspeed: SD high-speed timing is supported
 - cap-mmc-highspeed: MMC high-speed timing is supported
+- sd-uhs-sdr12: SD UHS SDR12 speed is supported
+- sd-uhs-sdr25: SD UHS SDR25 speed is supported
+- sd-uhs-sdr50: SD UHS SDR50 speed is supported
+- sd-uhs-sdr104: SD UHS SDR104 speed is supported
+- sd-uhs-ddr50: SD UHS DDR50 speed is supported
 - cap-power-off-card: powering off the card is safe
 - cap-sdio-irq: enable SDIO IRQ signalling on this interface
 - full-pwr-cycle: full power cycle of the card is supported
+- mmc-highspeed-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported
+- mmc-highspeed-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported
+- mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported
+- mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported
 
 *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
 polarity properties, we have to fix the meaning of the "normal" and "inverted"
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
new file mode 100644
index 000000000000..81b33b5b20fc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -0,0 +1,55 @@
+* Qualcomm SDHCI controller (sdhci-msm)
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-msm driver.
+
+Required properties:
+- compatible: Should contain "qcom,sdhci-msm-v4".
+- reg: Base address and length of the register in the following order:
+	- Host controller register map (required)
+	- SD Core register map (required)
+- interrupts: Should contain an interrupt-specifiers for the interrupts:
+	- Host controller interrupt (required)
+- pinctrl-names: Should contain only one value - "default".
+- pinctrl-0: Should specify pin control groups used for this controller.
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
+- clock-names: Should contain the following:
+	"iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
+	"core"	- SDC MMC clock (MCLK) (required)
+	"bus"	- SDCC bus voter clock (optional)
+
+Example:
+
+	sdhc_1: sdhci@f9824900 {
+		compatible = "qcom,sdhci-msm-v4";
+		reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
+		interrupts = <0 123 0>;
+		bus-width = <8>;
+		non-removable;
+
+		vmmc = <&pm8941_l20>;
+		vqmmc = <&pm8941_s3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
+
+		clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
+		clock-names = "core", "iface";
+	};
+
+	sdhc_2: sdhci@f98a4900 {
+		compatible = "qcom,sdhci-msm-v4";
+		reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+		interrupts = <0 125 0>;
+		bus-width = <4>;
+		cd-gpios = <&msmgpio 62 0x1>;
+
+		vmmc = <&pm8941_l21>;
+		vqmmc = <&pm8941_l13>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
+
+		clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+		clock-names = "core", "iface";
+	};
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
index dbe98a3c183a..86223c3eda90 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt
@@ -4,7 +4,14 @@ This file documents differences between the core properties in mmc.txt
 and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers.
 
 Required properties:
-- compatible: Should be "mrvl,pxav2-mmc" or "mrvl,pxav3-mmc".
+- compatible: Should be "mrvl,pxav2-mmc", "mrvl,pxav3-mmc" or
+  "marvell,armada-380-sdhci".
+- reg:
+  * for "mrvl,pxav2-mmc" and "mrvl,pxav3-mmc", one register area for
+    the SDHCI registers.
+  * for "marvell,armada-380-sdhci", two register areas. The first one
+    for the SDHCI registers themselves, and the second one for the
+    AXI/Mbus bridge registers of the SDHCI unit.
 
 Optional properties:
 - mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
@@ -19,3 +26,11 @@ sdhci@d4280800 {
 	non-removable;
 	mrvl,clk-delay-cycles = <31>;
 };
+
+sdhci@d8000 {
+	compatible = "marvell,armada-380-sdhci";
+	reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+	interrupts = <0 25 0x4>;
+	clocks = <&gateclk 17>;
+	mrvl,clk-delay-cycles = <0x1F>;
+};
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index 8c8908ab84ba..ce8056116fb0 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -10,6 +10,7 @@ Required properties:
 - compatible:
  Should be "ti,omap2-hsmmc", for OMAP2 controllers
  Should be "ti,omap3-hsmmc", for OMAP3 controllers
+ Should be "ti,omap3-pre-es3-hsmmc" for OMAP3 controllers pre ES3.0
  Should be "ti,omap4-hsmmc", for OMAP4 controllers
 - ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
 
diff --git a/Documentation/devicetree/bindings/regulator/pbias-regulator.txt b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
new file mode 100644
index 000000000000..32aa26f1e434
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/pbias-regulator.txt
@@ -0,0 +1,27 @@
+PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs.
+
+Required properties:
+- compatible:
+  - "ti,pbias-omap" for OMAP2, OMAP3, OMAP4, OMAP5, DRA7.
+- reg: pbias register offset from syscon base and size of pbias register.
+- syscon : phandle of the system control module
+- regulator-name : should be
+			pbias_mmc_omap2430 for OMAP2430, OMAP3 SoCs
+			pbias_sim_omap3 for OMAP3 SoCs
+			pbias_mmc_omap4 for OMAP4 SoCs
+			pbias_mmc_omap5 for OMAP5 and DRA7 SoC
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0 0x4>;
+			syscon = <&omap5_padconf_global>;
+			pbias_mmc_reg: pbias_mmc_omap5 {
+				regulator-name = "pbias_mmc_omap5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
diff --git a/MAINTAINERS b/MAINTAINERS
index 7faf31001437..a769432bddbe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5930,6 +5930,7 @@ F:	include/linux/mfd/
 
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
 M:	Chris Ball <chris@printf.net>
+M:	Ulf Hansson <ulf.hansson@linaro.org>
 L:	linux-mmc@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc.git
 S:	Maintained
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 9e3caf3d19fb..1c0f8e1893ae 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -154,6 +154,22 @@
 			ti,hwmods = "counter_32k";
 		};
 
+		dra7_ctrl_general: tisyscon@4a002e00 {
+			compatible = "syscon";
+			reg = <0x4a002e00 0x7c>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0 0x4>;
+			syscon = <&dra7_ctrl_general>;
+			pbias_mmc_reg: pbias_mmc_omap5 {
+				regulator-name = "pbias_mmc_omap5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		dra7_pmx_core: pinmux@4a003400 {
 			compatible = "pinctrl-single";
 			reg = <0x4a003400 0x0464>;
@@ -543,6 +559,7 @@
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
 			status = "disabled";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 9d2f028fd687..d09697dab55e 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -29,6 +29,22 @@
 			pinctrl-single,function-mask = <0x3f>;
 		};
 
+		omap2_scm_general: tisyscon@49002270 {
+			compatible = "syscon";
+			reg = <0x49002270 0x240>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x230 0x4>;
+			syscon = <&omap2_scm_general>;
+			pbias_mmc_reg: pbias_mmc_omap2430 {
+				regulator-name = "pbias_mmc_omap2430";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		gpio1: gpio@4900c000 {
 			compatible = "ti,omap2-gpio";
 			reg = <0x4900c000 0x200>;
@@ -188,6 +204,7 @@
 			ti,dual-volt;
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index ddce0d807f70..0abe986a4ecc 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -174,8 +174,20 @@
 };
 
 &mmc1 {
+	/* See 35xx errata 2.1.1.128 in SPRZ278F */
+	compatible = "ti,omap3-pre-es3-hsmmc";
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+	status="disabled";
+};
+
+&mmc3 {
+	status="disabled";
 };
 
 &omap3_pmx_core {
@@ -209,6 +221,17 @@
 			0x174 (PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
 		>;
 	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
+		>;
+	};
 };
 
 &usb_otg_hs {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 3d05eff67e25..5e5790f631eb 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -181,6 +181,22 @@
 			pinctrl-single,function-mask = <0xff1f>;
 		};
 
+		omap3_scm_general: tisyscon@48002270 {
+			compatible = "syscon";
+			reg = <0x48002270 0x2f0>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x2b0 0x4>;
+			syscon = <&omap3_scm_general>;
+			pbias_mmc_reg: pbias_mmc_omap2430 {
+				regulator-name = "pbias_mmc_omap2430";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		gpio1: gpio@48310000 {
 			compatible = "ti,omap3-gpio";
 			reg = <0x48310000 0x200>;
@@ -395,6 +411,7 @@
 			ti,dual-volt;
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 2b4c1cbbce33..27fcac874742 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -191,6 +191,22 @@
 			pinctrl-single,function-mask = <0x7fff>;
 		};
 
+		omap4_padconf_global: tisyscon@4a1005a0 {
+			compatible = "syscon";
+			reg = <0x4a1005a0 0x170>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x60 0x4>;
+			syscon = <&omap4_padconf_global>;
+			pbias_mmc_reg: pbias_mmc_omap4 {
+				regulator-name = "pbias_mmc_omap4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -427,6 +443,7 @@
 			ti,needs-special-reset;
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 19155bb84835..6f3de22fb266 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -198,6 +198,22 @@
 			pinctrl-single,function-mask = <0x7fff>;
 		};
 
+		omap5_padconf_global: tisyscon@4a002da0 {
+			compatible = "syscon";
+			reg = <0x4A002da0 0xec>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x60 0x4>;
+			syscon = <&omap5_padconf_global>;
+			pbias_mmc_reg: pbias_mmc_omap5 {
+				regulator-name = "pbias_mmc_omap5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -480,6 +496,7 @@
 			ti,needs-special-reset;
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 364ba38e40f3..a9667957b757 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -170,6 +170,7 @@ CONFIG_DRA752_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_SYSCON=y
 CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TPS65910=y
@@ -181,6 +182,7 @@ CONFIG_REGULATOR_TPS6507X=y
 CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TPS65910=y
 CONFIG_REGULATOR_TWL4030=y
+CONFIG_REGULATOR_PBIAS=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index 1d15735f9ef9..c9de3d598ea5 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -338,58 +338,28 @@ int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist,
 		int num_sg, bool read, int timeout)
 {
 	struct completion trans_done;
-	u8 dir;
-	int err = 0, i, count;
+	int err = 0, count;
 	long timeleft;
 	unsigned long flags;
-	struct scatterlist *sg;
-	enum dma_data_direction dma_dir;
-	u32 val;
-	dma_addr_t addr;
-	unsigned int len;
-
-	dev_dbg(&(pcr->pci->dev), "--> %s: num_sg = %d\n", __func__, num_sg);
-
-	/* don't transfer data during abort processing */
-	if (pcr->remove_pci)
-		return -EINVAL;
-
-	if ((sglist == NULL) || (num_sg <= 0))
-		return -EINVAL;
 
-	if (read) {
-		dir = DEVICE_TO_HOST;
-		dma_dir = DMA_FROM_DEVICE;
-	} else {
-		dir = HOST_TO_DEVICE;
-		dma_dir = DMA_TO_DEVICE;
-	}
-
-	count = dma_map_sg(&(pcr->pci->dev), sglist, num_sg, dma_dir);
+	count = rtsx_pci_dma_map_sg(pcr, sglist, num_sg, read);
 	if (count < 1) {
 		dev_err(&(pcr->pci->dev), "scatterlist map failed\n");
 		return -EINVAL;
 	}
 	dev_dbg(&(pcr->pci->dev), "DMA mapping count: %d\n", count);
 
-	val = ((u32)(dir & 0x01) << 29) | TRIG_DMA | ADMA_MODE;
-	pcr->sgi = 0;
-	for_each_sg(sglist, sg, count, i) {
-		addr = sg_dma_address(sg);
-		len = sg_dma_len(sg);
-		rtsx_pci_add_sg_tbl(pcr, addr, len, i == count - 1);
-	}
 
 	spin_lock_irqsave(&pcr->lock, flags);
 
 	pcr->done = &trans_done;
 	pcr->trans_result = TRANS_NOT_READY;
 	init_completion(&trans_done);
-	rtsx_pci_writel(pcr, RTSX_HDBAR, pcr->host_sg_tbl_addr);
-	rtsx_pci_writel(pcr, RTSX_HDBCTLR, val);
 
 	spin_unlock_irqrestore(&pcr->lock, flags);
 
+	rtsx_pci_dma_transfer(pcr, sglist, count, read);
+
 	timeleft = wait_for_completion_interruptible_timeout(
 			&trans_done, msecs_to_jiffies(timeout));
 	if (timeleft <= 0) {
@@ -413,7 +383,7 @@ out:
 	pcr->done = NULL;
 	spin_unlock_irqrestore(&pcr->lock, flags);
 
-	dma_unmap_sg(&(pcr->pci->dev), sglist, num_sg, dma_dir);
+	rtsx_pci_dma_unmap_sg(pcr, sglist, num_sg, read);
 
 	if ((err < 0) && (err != -ENODEV))
 		rtsx_pci_stop_cmd(pcr);
@@ -425,6 +395,73 @@ out:
 }
 EXPORT_SYMBOL_GPL(rtsx_pci_transfer_data);
 
+int rtsx_pci_dma_map_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+		int num_sg, bool read)
+{
+	enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+	if (pcr->remove_pci)
+		return -EINVAL;
+
+	if ((sglist == NULL) || num_sg < 1)
+		return -EINVAL;
+
+	return dma_map_sg(&(pcr->pci->dev), sglist, num_sg, dir);
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_dma_map_sg);
+
+int rtsx_pci_dma_unmap_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+		int num_sg, bool read)
+{
+	enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+	if (pcr->remove_pci)
+		return -EINVAL;
+
+	if (sglist == NULL || num_sg < 1)
+		return -EINVAL;
+
+	dma_unmap_sg(&(pcr->pci->dev), sglist, num_sg, dir);
+	return num_sg;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_dma_unmap_sg);
+
+int rtsx_pci_dma_transfer(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+		int sg_count, bool read)
+{
+	struct scatterlist *sg;
+	dma_addr_t addr;
+	unsigned int len;
+	int i;
+	u32 val;
+	u8 dir = read ? DEVICE_TO_HOST : HOST_TO_DEVICE;
+	unsigned long flags;
+
+	if (pcr->remove_pci)
+		return -EINVAL;
+
+	if ((sglist == NULL) || (sg_count < 1))
+		return -EINVAL;
+
+	val = ((u32)(dir & 0x01) << 29) | TRIG_DMA | ADMA_MODE;
+	pcr->sgi = 0;
+	for_each_sg(sglist, sg, sg_count, i) {
+		addr = sg_dma_address(sg);
+		len = sg_dma_len(sg);
+		rtsx_pci_add_sg_tbl(pcr, addr, len, i == sg_count - 1);
+	}
+
+	spin_lock_irqsave(&pcr->lock, flags);
+
+	rtsx_pci_writel(pcr, RTSX_HDBAR, pcr->host_sg_tbl_addr);
+	rtsx_pci_writel(pcr, RTSX_HDBCTLR, val);
+
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rtsx_pci_dma_transfer);
+
 int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len)
 {
 	int err;
@@ -836,6 +873,8 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
 	int_reg = rtsx_pci_readl(pcr, RTSX_BIPR);
 	/* Clear interrupt flag */
 	rtsx_pci_writel(pcr, RTSX_BIPR, int_reg);
+	dev_dbg(&pcr->pci->dev, "=========== BIPR 0x%8x ==========\n", int_reg);
+
 	if ((int_reg & pcr->bier) == 0) {
 		spin_unlock(&pcr->lock);
 		return IRQ_NONE;
@@ -866,17 +905,28 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
 	}
 
 	if (int_reg & (NEED_COMPLETE_INT | DELINK_INT)) {
-		if (int_reg & (TRANS_FAIL_INT | DELINK_INT)) {
+		if (int_reg & (TRANS_FAIL_INT | DELINK_INT))
 			pcr->trans_result = TRANS_RESULT_FAIL;
-			if (pcr->done)
-				complete(pcr->done);
-		} else if (int_reg & TRANS_OK_INT) {
+		else if (int_reg & TRANS_OK_INT)
 			pcr->trans_result = TRANS_RESULT_OK;
-			if (pcr->done)
-				complete(pcr->done);
+
+		if (pcr->done)
+			complete(pcr->done);
+
+		if (int_reg & SD_EXIST) {
+			struct rtsx_slot *slot = &pcr->slots[RTSX_SD_CARD];
+			if (slot && slot->done_transfer)
+				slot->done_transfer(slot->p_dev);
+		}
+
+		if (int_reg & MS_EXIST) {
+			struct rtsx_slot *slot = &pcr->slots[RTSX_SD_CARD];
+			if (slot && slot->done_transfer)
+				slot->done_transfer(slot->p_dev);
 		}
 	}
 
+
 	if (pcr->card_inserted || pcr->card_removed)
 		schedule_delayed_work(&pcr->carddet_work,
 				msecs_to_jiffies(200));
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 7b5424f398ac..452782bffebc 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -415,8 +415,7 @@ static int ioctl_do_sanitize(struct mmc_card *card)
 {
 	int err;
 
-	if (!(mmc_can_sanitize(card) &&
-	      (card->host->caps2 & MMC_CAP2_SANITIZE))) {
+	if (!mmc_can_sanitize(card)) {
 			pr_warn("%s: %s - SANITIZE is not supported\n",
 				mmc_hostname(card->host), __func__);
 			err = -EOPNOTSUPP;
@@ -722,19 +721,6 @@ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
 	return result;
 }
 
-static int send_stop(struct mmc_card *card, u32 *status)
-{
-	struct mmc_command cmd = {0};
-	int err;
-
-	cmd.opcode = MMC_STOP_TRANSMISSION;
-	cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
-	err = mmc_wait_for_cmd(card->host, &cmd, 5);
-	if (err == 0)
-		*status = cmd.resp[0];
-	return err;
-}
-
 static int get_card_status(struct mmc_card *card, u32 *status, int retries)
 {
 	struct mmc_command cmd = {0};
@@ -750,6 +736,99 @@ static int get_card_status(struct mmc_card *card, u32 *status, int retries)
 	return err;
 }
 
+static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms,
+		bool hw_busy_detect, struct request *req, int *gen_err)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+	int err = 0;
+	u32 status;
+
+	do {
+		err = get_card_status(card, &status, 5);
+		if (err) {
+			pr_err("%s: error %d requesting status\n",
+			       req->rq_disk->disk_name, err);
+			return err;
+		}
+
+		if (status & R1_ERROR) {
+			pr_err("%s: %s: error sending status cmd, status %#x\n",
+				req->rq_disk->disk_name, __func__, status);
+			*gen_err = 1;
+		}
+
+		/* We may rely on the host hw to handle busy detection.*/
+		if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) &&
+			hw_busy_detect)
+			break;
+
+		/*
+		 * Timeout if the device never becomes ready for data and never
+		 * leaves the program state.
+		 */
+		if (time_after(jiffies, timeout)) {
+			pr_err("%s: Card stuck in programming state! %s %s\n",
+				mmc_hostname(card->host),
+				req->rq_disk->disk_name, __func__);
+			return -ETIMEDOUT;
+		}
+
+		/*
+		 * Some cards mishandle the status bits,
+		 * so make sure to check both the busy
+		 * indication and the card state.
+		 */
+	} while (!(status & R1_READY_FOR_DATA) ||
+		 (R1_CURRENT_STATE(status) == R1_STATE_PRG));
+
+	return err;
+}
+
+static int send_stop(struct mmc_card *card, unsigned int timeout_ms,
+		struct request *req, int *gen_err, u32 *stop_status)
+{
+	struct mmc_host *host = card->host;
+	struct mmc_command cmd = {0};
+	int err;
+	bool use_r1b_resp = rq_data_dir(req) == WRITE;
+
+	/*
+	 * Normally we use R1B responses for WRITE, but in cases where the host
+	 * has specified a max_busy_timeout we need to validate it. A failure
+	 * means we need to prevent the host from doing hw busy detection, which
+	 * is done by converting to a R1 response instead.
+	 */
+	if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout))
+		use_r1b_resp = false;
+
+	cmd.opcode = MMC_STOP_TRANSMISSION;
+	if (use_r1b_resp) {
+		cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+		cmd.busy_timeout = timeout_ms;
+	} else {
+		cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+	}
+
+	err = mmc_wait_for_cmd(host, &cmd, 5);
+	if (err)
+		return err;
+
+	*stop_status = cmd.resp[0];
+
+	/* No need to check card status in case of READ. */
+	if (rq_data_dir(req) == READ)
+		return 0;
+
+	if (!mmc_host_is_spi(host) &&
+		(*stop_status & R1_ERROR)) {
+		pr_err("%s: %s: general error sending stop command, resp %#x\n",
+			req->rq_disk->disk_name, __func__, *stop_status);
+		*gen_err = 1;
+	}
+
+	return card_busy_detect(card, timeout_ms, use_r1b_resp, req, gen_err);
+}
+
 #define ERR_NOMEDIUM	3
 #define ERR_RETRY	2
 #define ERR_ABORT	1
@@ -866,26 +945,21 @@ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
 	 */
 	if (R1_CURRENT_STATE(status) == R1_STATE_DATA ||
 	    R1_CURRENT_STATE(status) == R1_STATE_RCV) {
-		err = send_stop(card, &stop_status);
-		if (err)
+		err = send_stop(card,
+			DIV_ROUND_UP(brq->data.timeout_ns, 1000000),
+			req, gen_err, &stop_status);
+		if (err) {
 			pr_err("%s: error %d sending stop command\n",
 			       req->rq_disk->disk_name, err);
-
-		/*
-		 * If the stop cmd also timed out, the card is probably
-		 * not present, so abort.  Other errors are bad news too.
-		 */
-		if (err)
+			/*
+			 * If the stop cmd also timed out, the card is probably
+			 * not present, so abort. Other errors are bad news too.
+			 */
 			return ERR_ABORT;
+		}
+
 		if (stop_status & R1_CARD_ECC_FAILED)
 			*ecc_err = 1;
-		if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ)
-			if (stop_status & R1_ERROR) {
-				pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n",
-				       req->rq_disk->disk_name, __func__,
-				       stop_status);
-				*gen_err = 1;
-			}
 	}
 
 	/* Check for set block count errors */
@@ -1157,8 +1231,7 @@ static int mmc_blk_err_check(struct mmc_card *card,
 	 * program mode, which we have to wait for it to complete.
 	 */
 	if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
-		u32 status;
-		unsigned long timeout;
+		int err;
 
 		/* Check stop command response */
 		if (brq->stop.resp[0] & R1_ERROR) {
@@ -1168,39 +1241,10 @@ static int mmc_blk_err_check(struct mmc_card *card,
 			gen_err = 1;
 		}
 
-		timeout = jiffies + msecs_to_jiffies(MMC_BLK_TIMEOUT_MS);
-		do {
-			int err = get_card_status(card, &status, 5);
-			if (err) {
-				pr_err("%s: error %d requesting status\n",
-				       req->rq_disk->disk_name, err);
-				return MMC_BLK_CMD_ERR;
-			}
-
-			if (status & R1_ERROR) {
-				pr_err("%s: %s: general error sending status command, card status %#x\n",
-				       req->rq_disk->disk_name, __func__,
-				       status);
-				gen_err = 1;
-			}
-
-			/* Timeout if the device never becomes ready for data
-			 * and never leaves the program state.
-			 */
-			if (time_after(jiffies, timeout)) {
-				pr_err("%s: Card stuck in programming state!"\
-					" %s %s\n", mmc_hostname(card->host),
-					req->rq_disk->disk_name, __func__);
-
-				return MMC_BLK_CMD_ERR;
-			}
-			/*
-			 * Some cards mishandle the status bits,
-			 * so make sure to check both the busy
-			 * indication and the card state.
-			 */
-		} while (!(status & R1_READY_FOR_DATA) ||
-			 (R1_CURRENT_STATE(status) == R1_STATE_PRG));
+		err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, false, req,
+					&gen_err);
+		if (err)
+			return MMC_BLK_CMD_ERR;
 	}
 
 	/* if general error occurs, retry the write operation. */
@@ -1335,7 +1379,6 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 	brq->data.blksz = 512;
 	brq->stop.opcode = MMC_STOP_TRANSMISSION;
 	brq->stop.arg = 0;
-	brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
 	brq->data.blocks = blk_rq_sectors(req);
 
 	/*
@@ -1378,9 +1421,15 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 	if (rq_data_dir(req) == READ) {
 		brq->cmd.opcode = readcmd;
 		brq->data.flags |= MMC_DATA_READ;
+		if (brq->mrq.stop)
+			brq->stop.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |
+					MMC_CMD_AC;
 	} else {
 		brq->cmd.opcode = writecmd;
 		brq->data.flags |= MMC_DATA_WRITE;
+		if (brq->mrq.stop)
+			brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |
+					MMC_CMD_AC;
 	}
 
 	if (do_rel_wr)
diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig
index 269d072ef55e..9ebee72d9c3f 100644
--- a/drivers/mmc/core/Kconfig
+++ b/drivers/mmc/core/Kconfig
@@ -2,21 +2,6 @@
 # MMC core configuration
 #
 
-config MMC_UNSAFE_RESUME
-	bool "Assume MMC/SD cards are non-removable (DANGEROUS)"
-	help
-	  If you say Y here, the MMC layer will assume that all cards
-	  stayed in their respective slots during the suspend. The
-	  normal behaviour is to remove them at suspend and
-	  redetecting them at resume. Breaking this assumption will
-	  in most cases result in data corruption.
-
-	  This option is usually just for embedded systems which use
-	  a MMC/SD card for rootfs. Most people should say N here.
-
-	  This option sets a default which can be overridden by the
-	  module parameter "removable=0" or "removable=1".
-
 config MMC_CLKGATE
 	bool "MMC host clock gating"
 	help
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 64145a32b917..824644875d41 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -185,24 +185,16 @@ static int mmc_runtime_suspend(struct device *dev)
 {
 	struct mmc_card *card = mmc_dev_to_card(dev);
 	struct mmc_host *host = card->host;
-	int ret = 0;
 
-	if (host->bus_ops->runtime_suspend)
-		ret = host->bus_ops->runtime_suspend(host);
-
-	return ret;
+	return host->bus_ops->runtime_suspend(host);
 }
 
 static int mmc_runtime_resume(struct device *dev)
 {
 	struct mmc_card *card = mmc_dev_to_card(dev);
 	struct mmc_host *host = card->host;
-	int ret = 0;
 
-	if (host->bus_ops->runtime_resume)
-		ret = host->bus_ops->runtime_resume(host);
-
-	return ret;
+	return host->bus_ops->runtime_resume(host);
 }
 
 static int mmc_runtime_idle(struct device *dev)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 098374b1ab2b..acbc3f2aaaf9 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -34,6 +34,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/mmc.h>
 #include <linux/mmc/sd.h>
+#include <linux/mmc/slot-gpio.h>
 
 #include "core.h"
 #include "bus.h"
@@ -65,23 +66,6 @@ bool use_spi_crc = 1;
 module_param(use_spi_crc, bool, 0);
 
 /*
- * We normally treat cards as removed during suspend if they are not
- * known to be on a non-removable bus, to avoid the risk of writing
- * back data to a different card after resume.  Allow this to be
- * overridden if necessary.
- */
-#ifdef CONFIG_MMC_UNSAFE_RESUME
-bool mmc_assume_removable;
-#else
-bool mmc_assume_removable = 1;
-#endif
-EXPORT_SYMBOL(mmc_assume_removable);
-module_param_named(removable, mmc_assume_removable, bool, 0644);
-MODULE_PARM_DESC(
-	removable,
-	"MMC/SD cards are removable and may be removed during suspend");
-
-/*
  * Internal function. Schedule delayed work in the MMC work queue.
  */
 static int mmc_schedule_delayed_work(struct delayed_work *work,
@@ -302,7 +286,8 @@ void mmc_start_bkops(struct mmc_card *card, bool from_exception)
 	}
 
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-			EXT_CSD_BKOPS_START, 1, timeout, use_busy_signal, true);
+			EXT_CSD_BKOPS_START, 1, timeout,
+			use_busy_signal, true, false);
 	if (err) {
 		pr_warn("%s: Error %d starting bkops\n",
 			mmc_hostname(card->host), err);
@@ -1950,7 +1935,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
 	cmd.opcode = MMC_ERASE;
 	cmd.arg = arg;
 	cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
-	cmd.cmd_timeout_ms = mmc_erase_timeout(card, arg, qty);
+	cmd.busy_timeout = mmc_erase_timeout(card, arg, qty);
 	err = mmc_wait_for_cmd(card->host, &cmd, 0);
 	if (err) {
 		pr_err("mmc_erase: erase error %d, status %#x\n",
@@ -2137,7 +2122,7 @@ static unsigned int mmc_do_calc_max_discard(struct mmc_card *card,
 		y = 0;
 		for (x = 1; x && x <= max_qty && max_qty - x >= qty; x <<= 1) {
 			timeout = mmc_erase_timeout(card, arg, qty + x);
-			if (timeout > host->max_discard_to)
+			if (timeout > host->max_busy_timeout)
 				break;
 			if (timeout < last_timeout)
 				break;
@@ -2169,7 +2154,7 @@ unsigned int mmc_calc_max_discard(struct mmc_card *card)
 	struct mmc_host *host = card->host;
 	unsigned int max_discard, max_trim;
 
-	if (!host->max_discard_to)
+	if (!host->max_busy_timeout)
 		return UINT_MAX;
 
 	/*
@@ -2189,7 +2174,7 @@ unsigned int mmc_calc_max_discard(struct mmc_card *card)
 		max_discard = 0;
 	}
 	pr_debug("%s: calculated max. discard sectors %u for timeout %u ms\n",
-		 mmc_hostname(host), max_discard, host->max_discard_to);
+		 mmc_hostname(host), max_discard, host->max_busy_timeout);
 	return max_discard;
 }
 EXPORT_SYMBOL(mmc_calc_max_discard);
@@ -2248,9 +2233,6 @@ static int mmc_do_hw_reset(struct mmc_host *host, int check)
 {
 	struct mmc_card *card = host->card;
 
-	if (!host->bus_ops->power_restore)
-		return -EOPNOTSUPP;
-
 	if (!(host->caps & MMC_CAP_HW_RESET) || !host->ops->hw_reset)
 		return -EOPNOTSUPP;
 
@@ -2352,7 +2334,7 @@ int _mmc_detect_card_removed(struct mmc_host *host)
 {
 	int ret;
 
-	if ((host->caps & MMC_CAP_NONREMOVABLE) || !host->bus_ops->alive)
+	if (host->caps & MMC_CAP_NONREMOVABLE)
 		return 0;
 
 	if (!host->card || mmc_card_removed(host->card))
@@ -2435,7 +2417,7 @@ void mmc_rescan(struct work_struct *work)
 	 * if there is a _removable_ card registered, check whether it is
 	 * still present
 	 */
-	if (host->bus_ops && host->bus_ops->detect && !host->bus_dead
+	if (host->bus_ops && !host->bus_dead
 	    && !(host->caps & MMC_CAP_NONREMOVABLE))
 		host->bus_ops->detect(host);
 
@@ -2490,6 +2472,7 @@ void mmc_start_host(struct mmc_host *host)
 		mmc_power_off(host);
 	else
 		mmc_power_up(host, host->ocr_avail);
+	mmc_gpiod_request_cd_irq(host);
 	_mmc_detect_change(host, 0, false);
 }
 
@@ -2501,6 +2484,8 @@ void mmc_stop_host(struct mmc_host *host)
 	host->removed = 1;
 	spin_unlock_irqrestore(&host->lock, flags);
 #endif
+	if (host->slot.cd_irq >= 0)
+		disable_irq(host->slot.cd_irq);
 
 	host->rescan_disable = 1;
 	cancel_delayed_work_sync(&host->detect);
@@ -2537,7 +2522,7 @@ int mmc_power_save_host(struct mmc_host *host)
 
 	mmc_bus_get(host);
 
-	if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) {
+	if (!host->bus_ops || host->bus_dead) {
 		mmc_bus_put(host);
 		return -EINVAL;
 	}
@@ -2563,7 +2548,7 @@ int mmc_power_restore_host(struct mmc_host *host)
 
 	mmc_bus_get(host);
 
-	if (!host->bus_ops || host->bus_dead || !host->bus_ops->power_restore) {
+	if (!host->bus_ops || host->bus_dead) {
 		mmc_bus_put(host);
 		return -EINVAL;
 	}
@@ -2582,12 +2567,8 @@ EXPORT_SYMBOL(mmc_power_restore_host);
  */
 int mmc_flush_cache(struct mmc_card *card)
 {
-	struct mmc_host *host = card->host;
 	int err = 0;
 
-	if (!(host->caps2 & MMC_CAP2_CACHE_CTRL))
-		return err;
-
 	if (mmc_card_mmc(card) &&
 			(card->ext_csd.cache_size > 0) &&
 			(card->ext_csd.cache_ctrl & 1)) {
@@ -2602,44 +2583,6 @@ int mmc_flush_cache(struct mmc_card *card)
 }
 EXPORT_SYMBOL(mmc_flush_cache);
 
-/*
- * Turn the cache ON/OFF.
- * Turning the cache OFF shall trigger flushing of the data
- * to the non-volatile storage.
- * This function should be called with host claimed
- */
-int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
-{
-	struct mmc_card *card = host->card;
-	unsigned int timeout;
-	int err = 0;
-
-	if (!(host->caps2 & MMC_CAP2_CACHE_CTRL) ||
-			mmc_card_is_removable(host))
-		return err;
-
-	if (card && mmc_card_mmc(card) &&
-			(card->ext_csd.cache_size > 0)) {
-		enable = !!enable;
-
-		if (card->ext_csd.cache_ctrl ^ enable) {
-			timeout = enable ? card->ext_csd.generic_cmd6_time : 0;
-			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-					EXT_CSD_CACHE_CTRL, enable, timeout);
-			if (err)
-				pr_err("%s: cache %s error %d\n",
-						mmc_hostname(card->host),
-						enable ? "on" : "off",
-						err);
-			else
-				card->ext_csd.cache_ctrl = enable;
-		}
-	}
-
-	return err;
-}
-EXPORT_SYMBOL(mmc_cache_ctrl);
-
 #ifdef CONFIG_PM
 
 /* Do the card removal on suspend if card is assumed removeable
@@ -2668,7 +2611,7 @@ int mmc_pm_notify(struct notifier_block *notify_block,
 		/* Validate prerequisites for suspend */
 		if (host->bus_ops->pre_suspend)
 			err = host->bus_ops->pre_suspend(host);
-		if (!err && host->bus_ops->suspend)
+		if (!err)
 			break;
 
 		/* Calling bus_ops->remove() with a claimed host can deadlock */
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 114f6bdfbef3..fdea825dbb24 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -419,6 +419,16 @@ int mmc_of_parse(struct mmc_host *host)
 		host->caps |= MMC_CAP_SD_HIGHSPEED;
 	if (of_find_property(np, "cap-mmc-highspeed", &len))
 		host->caps |= MMC_CAP_MMC_HIGHSPEED;
+	if (of_find_property(np, "sd-uhs-sdr12", &len))
+		host->caps |= MMC_CAP_UHS_SDR12;
+	if (of_find_property(np, "sd-uhs-sdr25", &len))
+		host->caps |= MMC_CAP_UHS_SDR25;
+	if (of_find_property(np, "sd-uhs-sdr50", &len))
+		host->caps |= MMC_CAP_UHS_SDR50;
+	if (of_find_property(np, "sd-uhs-sdr104", &len))
+		host->caps |= MMC_CAP_UHS_SDR104;
+	if (of_find_property(np, "sd-uhs-ddr50", &len))
+		host->caps |= MMC_CAP_UHS_DDR50;
 	if (of_find_property(np, "cap-power-off-card", &len))
 		host->caps |= MMC_CAP_POWER_OFF_CARD;
 	if (of_find_property(np, "cap-sdio-irq", &len))
@@ -429,6 +439,14 @@ int mmc_of_parse(struct mmc_host *host)
 		host->pm_caps |= MMC_PM_KEEP_POWER;
 	if (of_find_property(np, "enable-sdio-wakeup", &len))
 		host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+	if (of_find_property(np, "mmc-ddr-1_8v", &len))
+		host->caps |= MMC_CAP_1_8V_DDR;
+	if (of_find_property(np, "mmc-ddr-1_2v", &len))
+		host->caps |= MMC_CAP_1_2V_DDR;
+	if (of_find_property(np, "mmc-hs200-1_8v", &len))
+		host->caps2 |= MMC_CAP2_HS200_1_8V_SDR;
+	if (of_find_property(np, "mmc-hs200-1_2v", &len))
+		host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
 
 	return 0;
 
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 98e9eb0f6643..1ab5f3a0af5b 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -856,8 +856,10 @@ static int mmc_select_hs200(struct mmc_card *card)
 
 	/* switch to HS200 mode if bus width set successfully */
 	if (!err)
-		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-				 EXT_CSD_HS_TIMING, 2, 0);
+		err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+				EXT_CSD_HS_TIMING, 2,
+				card->ext_csd.generic_cmd6_time,
+				true, true, true);
 err:
 	return err;
 }
@@ -1074,9 +1076,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 		    host->caps2 & MMC_CAP2_HS200)
 			err = mmc_select_hs200(card);
 		else if	(host->caps & MMC_CAP_MMC_HIGHSPEED)
-			err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-					 EXT_CSD_HS_TIMING, 1,
-					 card->ext_csd.generic_cmd6_time);
+			err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+					EXT_CSD_HS_TIMING, 1,
+					card->ext_csd.generic_cmd6_time,
+					true, true, true);
 
 		if (err && err != -EBADMSG)
 			goto free_card;
@@ -1287,8 +1290,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	 * If cache size is higher than 0, this indicates
 	 * the existence of cache and it can be turned on.
 	 */
-	if ((host->caps2 & MMC_CAP2_CACHE_CTRL) &&
-			card->ext_csd.cache_size > 0) {
+	if (card->ext_csd.cache_size > 0) {
 		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 				EXT_CSD_CACHE_CTRL, 1,
 				card->ext_csd.generic_cmd6_time);
@@ -1356,11 +1358,9 @@ static int mmc_sleep(struct mmc_host *host)
 {
 	struct mmc_command cmd = {0};
 	struct mmc_card *card = host->card;
+	unsigned int timeout_ms = DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000);
 	int err;
 
-	if (host->caps2 & MMC_CAP2_NO_SLEEP_CMD)
-		return 0;
-
 	err = mmc_deselect_cards(host);
 	if (err)
 		return err;
@@ -1369,7 +1369,19 @@ static int mmc_sleep(struct mmc_host *host)
 	cmd.arg = card->rca << 16;
 	cmd.arg |= 1 << 15;
 
-	cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+	/*
+	 * If the max_busy_timeout of the host is specified, validate it against
+	 * the sleep cmd timeout. A failure means we need to prevent the host
+	 * from doing hw busy detection, which is done by converting to a R1
+	 * response instead of a R1B.
+	 */
+	if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) {
+		cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+	} else {
+		cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+		cmd.busy_timeout = timeout_ms;
+	}
+
 	err = mmc_wait_for_cmd(host, &cmd, 0);
 	if (err)
 		return err;
@@ -1380,8 +1392,8 @@ static int mmc_sleep(struct mmc_host *host)
 	 * SEND_STATUS command to poll the status because that command (and most
 	 * others) is invalid while the card sleeps.
 	 */
-	if (!(host->caps & MMC_CAP_WAIT_WHILE_BUSY))
-		mmc_delay(DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000));
+	if (!cmd.busy_timeout || !(host->caps & MMC_CAP_WAIT_WHILE_BUSY))
+		mmc_delay(timeout_ms);
 
 	return err;
 }
@@ -1404,7 +1416,7 @@ static int mmc_poweroff_notify(struct mmc_card *card, unsigned int notify_type)
 
 	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
 			EXT_CSD_POWER_OFF_NOTIFICATION,
-			notify_type, timeout, true, false);
+			notify_type, timeout, true, false, false);
 	if (err)
 		pr_err("%s: Power Off Notification timed out, %u\n",
 		       mmc_hostname(card->host), timeout);
@@ -1484,7 +1496,7 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
 			goto out;
 	}
 
-	err = mmc_cache_ctrl(host, 0);
+	err = mmc_flush_cache(host->card);
 	if (err)
 		goto out;
 
@@ -1636,16 +1648,6 @@ static int mmc_power_restore(struct mmc_host *host)
 static const struct mmc_bus_ops mmc_ops = {
 	.remove = mmc_remove,
 	.detect = mmc_detect,
-	.suspend = NULL,
-	.resume = NULL,
-	.power_restore = mmc_power_restore,
-	.alive = mmc_alive,
-	.shutdown = mmc_shutdown,
-};
-
-static const struct mmc_bus_ops mmc_ops_unsafe = {
-	.remove = mmc_remove,
-	.detect = mmc_detect,
 	.suspend = mmc_suspend,
 	.resume = mmc_resume,
 	.runtime_suspend = mmc_runtime_suspend,
@@ -1655,17 +1657,6 @@ static const struct mmc_bus_ops mmc_ops_unsafe = {
 	.shutdown = mmc_shutdown,
 };
 
-static void mmc_attach_bus_ops(struct mmc_host *host)
-{
-	const struct mmc_bus_ops *bus_ops;
-
-	if (!mmc_card_is_removable(host))
-		bus_ops = &mmc_ops_unsafe;
-	else
-		bus_ops = &mmc_ops;
-	mmc_attach_bus(host, bus_ops);
-}
-
 /*
  * Starting point for MMC card init.
  */
@@ -1685,7 +1676,7 @@ int mmc_attach_mmc(struct mmc_host *host)
 	if (err)
 		return err;
 
-	mmc_attach_bus_ops(host);
+	mmc_attach_bus(host, &mmc_ops);
 	if (host->ocr_avail_mmc)
 		host->ocr_avail = host->ocr_avail_mmc;
 
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index e5b5eeb548d1..f51b5ba3bbea 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -405,20 +405,30 @@ int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
  *                   timeout of zero implies maximum possible timeout
  *	@use_busy_signal: use the busy signal as response type
  *	@send_status: send status cmd to poll for busy
+ *	@ignore_crc: ignore CRC errors when sending status cmd to poll for busy
  *
  *	Modifies the EXT_CSD register for selected card.
  */
 int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
-		unsigned int timeout_ms, bool use_busy_signal, bool send_status)
+		unsigned int timeout_ms, bool use_busy_signal, bool send_status,
+		bool ignore_crc)
 {
+	struct mmc_host *host = card->host;
 	int err;
 	struct mmc_command cmd = {0};
 	unsigned long timeout;
 	u32 status = 0;
-	bool ignore_crc = false;
+	bool use_r1b_resp = use_busy_signal;
 
-	BUG_ON(!card);
-	BUG_ON(!card->host);
+	/*
+	 * If the cmd timeout and the max_busy_timeout of the host are both
+	 * specified, let's validate them. A failure means we need to prevent
+	 * the host from doing hw busy detection, which is done by converting
+	 * to a R1 response instead of a R1B.
+	 */
+	if (timeout_ms && host->max_busy_timeout &&
+		(timeout_ms > host->max_busy_timeout))
+		use_r1b_resp = false;
 
 	cmd.opcode = MMC_SWITCH;
 	cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
@@ -426,17 +436,21 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		  (value << 8) |
 		  set;
 	cmd.flags = MMC_CMD_AC;
-	if (use_busy_signal)
+	if (use_r1b_resp) {
 		cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B;
-	else
+		/*
+		 * A busy_timeout of zero means the host can decide to use
+		 * whatever value it finds suitable.
+		 */
+		cmd.busy_timeout = timeout_ms;
+	} else {
 		cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1;
+	}
 
-
-	cmd.cmd_timeout_ms = timeout_ms;
 	if (index == EXT_CSD_SANITIZE_START)
 		cmd.sanitize_busy = true;
 
-	err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+	err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
 	if (err)
 		return err;
 
@@ -445,24 +459,27 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		return 0;
 
 	/*
-	 * Must check status to be sure of no errors
-	 * If CMD13 is to check the busy completion of the timing change,
-	 * disable the check of CRC error.
+	 * CRC errors shall only be ignored in cases were CMD13 is used to poll
+	 * to detect busy completion.
 	 */
-	if (index == EXT_CSD_HS_TIMING &&
-	    !(card->host->caps & MMC_CAP_WAIT_WHILE_BUSY))
-		ignore_crc = true;
+	if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
+		ignore_crc = false;
+
+	/* We have an unspecified cmd timeout, use the fallback value. */
+	if (!timeout_ms)
+		timeout_ms = MMC_OPS_TIMEOUT_MS;
 
-	timeout = jiffies + msecs_to_jiffies(MMC_OPS_TIMEOUT_MS);
+	/* Must check status to be sure of no errors. */
+	timeout = jiffies + msecs_to_jiffies(timeout_ms);
 	do {
 		if (send_status) {
 			err = __mmc_send_status(card, &status, ignore_crc);
 			if (err)
 				return err;
 		}
-		if (card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
+		if ((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp)
 			break;
-		if (mmc_host_is_spi(card->host))
+		if (mmc_host_is_spi(host))
 			break;
 
 		/*
@@ -478,18 +495,18 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		/* Timeout if the device never leaves the program state. */
 		if (time_after(jiffies, timeout)) {
 			pr_err("%s: Card stuck in programming state! %s\n",
-				mmc_hostname(card->host), __func__);
+				mmc_hostname(host), __func__);
 			return -ETIMEDOUT;
 		}
 	} while (R1_CURRENT_STATE(status) == R1_STATE_PRG);
 
-	if (mmc_host_is_spi(card->host)) {
+	if (mmc_host_is_spi(host)) {
 		if (status & R1_SPI_ILLEGAL_COMMAND)
 			return -EBADMSG;
 	} else {
 		if (status & 0xFDFFA000)
-			pr_warning("%s: unexpected status %#x after "
-			       "switch", mmc_hostname(card->host), status);
+			pr_warn("%s: unexpected status %#x after switch\n",
+				mmc_hostname(host), status);
 		if (status & R1_SWITCH_ERROR)
 			return -EBADMSG;
 	}
@@ -501,7 +518,8 @@ EXPORT_SYMBOL_GPL(__mmc_switch);
 int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
 		unsigned int timeout_ms)
 {
-	return __mmc_switch(card, set, index, value, timeout_ms, true, true);
+	return __mmc_switch(card, set, index, value, timeout_ms, true, true,
+				false);
 }
 EXPORT_SYMBOL_GPL(mmc_switch);
 
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 692fdb177294..2dd359d2242f 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -1209,16 +1209,6 @@ static int mmc_sd_power_restore(struct mmc_host *host)
 static const struct mmc_bus_ops mmc_sd_ops = {
 	.remove = mmc_sd_remove,
 	.detect = mmc_sd_detect,
-	.suspend = NULL,
-	.resume = NULL,
-	.power_restore = mmc_sd_power_restore,
-	.alive = mmc_sd_alive,
-	.shutdown = mmc_sd_suspend,
-};
-
-static const struct mmc_bus_ops mmc_sd_ops_unsafe = {
-	.remove = mmc_sd_remove,
-	.detect = mmc_sd_detect,
 	.runtime_suspend = mmc_sd_runtime_suspend,
 	.runtime_resume = mmc_sd_runtime_resume,
 	.suspend = mmc_sd_suspend,
@@ -1228,17 +1218,6 @@ static const struct mmc_bus_ops mmc_sd_ops_unsafe = {
 	.shutdown = mmc_sd_suspend,
 };
 
-static void mmc_sd_attach_bus_ops(struct mmc_host *host)
-{
-	const struct mmc_bus_ops *bus_ops;
-
-	if (!mmc_card_is_removable(host))
-		bus_ops = &mmc_sd_ops_unsafe;
-	else
-		bus_ops = &mmc_sd_ops;
-	mmc_attach_bus(host, bus_ops);
-}
-
 /*
  * Starting point for SD card init.
  */
@@ -1254,7 +1233,7 @@ int mmc_attach_sd(struct mmc_host *host)
 	if (err)
 		return err;
 
-	mmc_sd_attach_bus_ops(host);
+	mmc_attach_bus(host, &mmc_sd_ops);
 	if (host->ocr_avail_sd)
 		host->ocr_avail = host->ocr_avail_sd;
 
diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c
index 46596b71a32f..f7650b899e3d 100644
--- a/drivers/mmc/core/slot-gpio.c
+++ b/drivers/mmc/core/slot-gpio.c
@@ -10,6 +10,7 @@
 
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/mmc/host.h>
@@ -18,8 +19,10 @@
 #include <linux/slab.h>
 
 struct mmc_gpio {
-	int ro_gpio;
-	int cd_gpio;
+	struct gpio_desc *ro_gpio;
+	struct gpio_desc *cd_gpio;
+	bool override_ro_active_level;
+	bool override_cd_active_level;
 	char *ro_label;
 	char cd_label[0];
 };
@@ -57,8 +60,6 @@ static int mmc_gpio_alloc(struct mmc_host *host)
 			ctx->ro_label = ctx->cd_label + len;
 			snprintf(ctx->cd_label, len, "%s cd", dev_name(host->parent));
 			snprintf(ctx->ro_label, len, "%s ro", dev_name(host->parent));
-			ctx->cd_gpio = -EINVAL;
-			ctx->ro_gpio = -EINVAL;
 			host->slot.handler_priv = ctx;
 		}
 	}
@@ -72,11 +73,14 @@ int mmc_gpio_get_ro(struct mmc_host *host)
 {
 	struct mmc_gpio *ctx = host->slot.handler_priv;
 
-	if (!ctx || !gpio_is_valid(ctx->ro_gpio))
+	if (!ctx || !ctx->ro_gpio)
 		return -ENOSYS;
 
-	return !gpio_get_value_cansleep(ctx->ro_gpio) ^
-		!!(host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH);
+	if (ctx->override_ro_active_level)
+		return !gpiod_get_raw_value_cansleep(ctx->ro_gpio) ^
+			!!(host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH);
+
+	return gpiod_get_value_cansleep(ctx->ro_gpio);
 }
 EXPORT_SYMBOL(mmc_gpio_get_ro);
 
@@ -84,11 +88,14 @@ int mmc_gpio_get_cd(struct mmc_host *host)
 {
 	struct mmc_gpio *ctx = host->slot.handler_priv;
 
-	if (!ctx || !gpio_is_valid(ctx->cd_gpio))
+	if (!ctx || !ctx->cd_gpio)
 		return -ENOSYS;
 
-	return !gpio_get_value_cansleep(ctx->cd_gpio) ^
-		!!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
+	if (ctx->override_cd_active_level)
+		return !gpiod_get_raw_value_cansleep(ctx->cd_gpio) ^
+			!!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH);
+
+	return gpiod_get_value_cansleep(ctx->cd_gpio);
 }
 EXPORT_SYMBOL(mmc_gpio_get_cd);
 
@@ -125,12 +132,47 @@ int mmc_gpio_request_ro(struct mmc_host *host, unsigned int gpio)
 	if (ret < 0)
 		return ret;
 
-	ctx->ro_gpio = gpio;
+	ctx->override_ro_active_level = true;
+	ctx->ro_gpio = gpio_to_desc(gpio);
 
 	return 0;
 }
 EXPORT_SYMBOL(mmc_gpio_request_ro);
 
+void mmc_gpiod_request_cd_irq(struct mmc_host *host)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+	int ret, irq;
+
+	if (host->slot.cd_irq >= 0 || !ctx || !ctx->cd_gpio)
+		return;
+
+	irq = gpiod_to_irq(ctx->cd_gpio);
+
+	/*
+	 * Even if gpiod_to_irq() returns a valid IRQ number, the platform might
+	 * still prefer to poll, e.g., because that IRQ number is already used
+	 * by another unit and cannot be shared.
+	 */
+	if (irq >= 0 && host->caps & MMC_CAP_NEEDS_POLL)
+		irq = -EINVAL;
+
+	if (irq >= 0) {
+		ret = devm_request_threaded_irq(&host->class_dev, irq,
+			NULL, mmc_gpio_cd_irqt,
+			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			ctx->cd_label, host);
+		if (ret < 0)
+			irq = ret;
+	}
+
+	host->slot.cd_irq = irq;
+
+	if (irq < 0)
+		host->caps |= MMC_CAP_NEEDS_POLL;
+}
+EXPORT_SYMBOL(mmc_gpiod_request_cd_irq);
+
 /**
  * mmc_gpio_request_cd - request a gpio for card-detection
  * @host: mmc host
@@ -154,7 +196,6 @@ int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
 			unsigned int debounce)
 {
 	struct mmc_gpio *ctx;
-	int irq = gpio_to_irq(gpio);
 	int ret;
 
 	ret = mmc_gpio_alloc(host);
@@ -179,29 +220,10 @@ int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
 			return ret;
 	}
 
-	/*
-	 * Even if gpio_to_irq() returns a valid IRQ number, the platform might
-	 * still prefer to poll, e.g., because that IRQ number is already used
-	 * by another unit and cannot be shared.
-	 */
-	if (irq >= 0 && host->caps & MMC_CAP_NEEDS_POLL)
-		irq = -EINVAL;
-
-	if (irq >= 0) {
-		ret = devm_request_threaded_irq(&host->class_dev, irq,
-			NULL, mmc_gpio_cd_irqt,
-			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
-			ctx->cd_label, host);
-		if (ret < 0)
-			irq = ret;
-	}
-
-	host->slot.cd_irq = irq;
-
-	if (irq < 0)
-		host->caps |= MMC_CAP_NEEDS_POLL;
+	ctx->override_cd_active_level = true;
+	ctx->cd_gpio = gpio_to_desc(gpio);
 
-	ctx->cd_gpio = gpio;
+	mmc_gpiod_request_cd_irq(host);
 
 	return 0;
 }
@@ -219,11 +241,11 @@ void mmc_gpio_free_ro(struct mmc_host *host)
 	struct mmc_gpio *ctx = host->slot.handler_priv;
 	int gpio;
 
-	if (!ctx || !gpio_is_valid(ctx->ro_gpio))
+	if (!ctx || !ctx->ro_gpio)
 		return;
 
-	gpio = ctx->ro_gpio;
-	ctx->ro_gpio = -EINVAL;
+	gpio = desc_to_gpio(ctx->ro_gpio);
+	ctx->ro_gpio = NULL;
 
 	devm_gpio_free(&host->class_dev, gpio);
 }
@@ -241,7 +263,7 @@ void mmc_gpio_free_cd(struct mmc_host *host)
 	struct mmc_gpio *ctx = host->slot.handler_priv;
 	int gpio;
 
-	if (!ctx || !gpio_is_valid(ctx->cd_gpio))
+	if (!ctx || !ctx->cd_gpio)
 		return;
 
 	if (host->slot.cd_irq >= 0) {
@@ -249,9 +271,87 @@ void mmc_gpio_free_cd(struct mmc_host *host)
 		host->slot.cd_irq = -EINVAL;
 	}
 
-	gpio = ctx->cd_gpio;
-	ctx->cd_gpio = -EINVAL;
+	gpio = desc_to_gpio(ctx->cd_gpio);
+	ctx->cd_gpio = NULL;
 
 	devm_gpio_free(&host->class_dev, gpio);
 }
 EXPORT_SYMBOL(mmc_gpio_free_cd);
+
+/**
+ * mmc_gpiod_request_cd - request a gpio descriptor for card-detection
+ * @host: mmc host
+ * @con_id: function within the GPIO consumer
+ * @idx: index of the GPIO to obtain in the consumer
+ * @override_active_level: ignore %GPIO_ACTIVE_LOW flag
+ * @debounce: debounce time in microseconds
+ *
+ * Use this function in place of mmc_gpio_request_cd() to use the GPIO
+ * descriptor API.  Note that it is paired with mmc_gpiod_free_cd() not
+ * mmc_gpio_free_cd().  Note also that it must be called prior to mmc_add_host()
+ * otherwise the caller must also call mmc_gpiod_request_cd_irq().
+ *
+ * Returns zero on success, else an error.
+ */
+int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
+			 unsigned int idx, bool override_active_level,
+			 unsigned int debounce)
+{
+	struct mmc_gpio *ctx;
+	struct gpio_desc *desc;
+	int ret;
+
+	ret = mmc_gpio_alloc(host);
+	if (ret < 0)
+		return ret;
+
+	ctx = host->slot.handler_priv;
+
+	if (!con_id)
+		con_id = ctx->cd_label;
+
+	desc = devm_gpiod_get_index(host->parent, con_id, idx);
+	if (IS_ERR(desc))
+		return PTR_ERR(desc);
+
+	ret = gpiod_direction_input(desc);
+	if (ret < 0)
+		return ret;
+
+	if (debounce) {
+		ret = gpiod_set_debounce(desc, debounce);
+		if (ret < 0)
+			return ret;
+	}
+
+	ctx->override_cd_active_level = override_active_level;
+	ctx->cd_gpio = desc;
+
+	return 0;
+}
+EXPORT_SYMBOL(mmc_gpiod_request_cd);
+
+/**
+ * mmc_gpiod_free_cd - free the card-detection gpio descriptor
+ * @host: mmc host
+ *
+ * It's provided only for cases that client drivers need to manually free
+ * up the card-detection gpio requested by mmc_gpiod_request_cd().
+ */
+void mmc_gpiod_free_cd(struct mmc_host *host)
+{
+	struct mmc_gpio *ctx = host->slot.handler_priv;
+
+	if (!ctx || !ctx->cd_gpio)
+		return;
+
+	if (host->slot.cd_irq >= 0) {
+		devm_free_irq(&host->class_dev, host->slot.cd_irq, host);
+		host->slot.cd_irq = -EINVAL;
+	}
+
+	devm_gpiod_put(&host->class_dev, ctx->cd_gpio);
+
+	ctx->cd_gpio = NULL;
+}
+EXPORT_SYMBOL(mmc_gpiod_free_cd);
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1384f67abe21..8aaf8c1f3f63 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -263,7 +263,7 @@ config MMC_SDHCI_S3C_DMA
 
 config MMC_SDHCI_BCM_KONA
 	tristate "SDHCI support on Broadcom KONA platform"
-	depends on ARCH_BCM
+	depends on ARCH_BCM_MOBILE
 	select MMC_SDHCI_PLTFM
 	help
 	  This selects the Broadcom Kona Secure Digital Host Controller
@@ -334,6 +334,19 @@ config MMC_ATMELMCI
 
 	  If unsure, say N.
 
+config MMC_SDHCI_MSM
+	tristate "Qualcomm SDHCI Controller Support"
+	depends on ARCH_QCOM
+	depends on MMC_SDHCI_PLTFM
+	help
+	  This selects the Secure Digital Host Controller Interface (SDHCI)
+	  support present in Qualcomm SOCs. The controller supports
+	  SD/MMC/SDIO devices.
+
+	  If you have a controller with this interface, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_MSM
 	tristate "Qualcomm SDCC Controller Support"
 	depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
@@ -580,14 +593,6 @@ config MMC_DW_EXYNOS
 	  Synopsys DesignWare Memory Card Interface driver. Select this option
 	  for platforms based on Exynos4 and Exynos5 SoC's.
 
-config MMC_DW_SOCFPGA
-	tristate "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
-	depends on MMC_DW && MFD_SYSCON
-	select MMC_DW_PLTFM
-	help
-	  This selects support for Altera SoCFPGA specific extensions to the
-	  Synopsys DesignWare Memory Card Interface driver.
-
 config MMC_DW_K3
 	tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
 	depends on MMC_DW
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 3483b6b6b880..0c8aa5e1e304 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -43,7 +43,6 @@ obj-$(CONFIG_SDH_BFIN)		+= bfin_sdh.o
 obj-$(CONFIG_MMC_DW)		+= dw_mmc.o
 obj-$(CONFIG_MMC_DW_PLTFM)	+= dw_mmc-pltfm.o
 obj-$(CONFIG_MMC_DW_EXYNOS)	+= dw_mmc-exynos.o
-obj-$(CONFIG_MMC_DW_SOCFPGA)	+= dw_mmc-socfpga.o
 obj-$(CONFIG_MMC_DW_K3)		+= dw_mmc-k3.o
 obj-$(CONFIG_MMC_DW_PCI)	+= dw_mmc-pci.o
 obj-$(CONFIG_MMC_SH_MMCIF)	+= sh_mmcif.o
@@ -64,6 +63,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)	+= sdhci-of-esdhc.o
 obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
 obj-$(CONFIG_MMC_SDHCI_BCM_KONA)	+= sdhci-bcm-kona.o
 obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= sdhci-bcm2835.o
+obj-$(CONFIG_MMC_SDHCI_MSM)		+= sdhci-msm.o
 
 ifeq ($(CONFIG_CB710_DEBUG),y)
 	CFLAGS-cb710-mmc	+= -DDEBUG
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
index d6153740b77f..5d4c5e0fba2f 100644
--- a/drivers/mmc/host/davinci_mmc.c
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -1192,7 +1192,7 @@ static struct davinci_mmc_config
 	struct device_node *np;
 	struct davinci_mmc_config *pdata = pdev->dev.platform_data;
 	const struct of_device_id *match =
-		of_match_device(of_match_ptr(davinci_mmc_dt_ids), &pdev->dev);
+		of_match_device(davinci_mmc_dt_ids, &pdev->dev);
 	u32 data;
 
 	np = pdev->dev.of_node;
@@ -1468,7 +1468,7 @@ static struct platform_driver davinci_mmcsd_driver = {
 		.name	= "davinci_mmc",
 		.owner	= THIS_MODULE,
 		.pm	= davinci_mmcsd_pm_ops,
-		.of_match_table = of_match_ptr(davinci_mmc_dt_ids),
+		.of_match_table = davinci_mmc_dt_ids,
 	},
 	.remove		= __exit_p(davinci_mmcsd_remove),
 	.id_table	= davinci_mmc_devtype,
diff --git a/drivers/mmc/host/dw_mmc-k3.c b/drivers/mmc/host/dw_mmc-k3.c
index f567c219cff4..650f9cc3f7a6 100644
--- a/drivers/mmc/host/dw_mmc-k3.c
+++ b/drivers/mmc/host/dw_mmc-k3.c
@@ -50,6 +50,7 @@ static int dw_mci_k3_probe(struct platform_device *pdev)
 	return dw_mci_pltfm_register(pdev, drv_data);
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int dw_mci_k3_suspend(struct device *dev)
 {
 	struct dw_mci *host = dev_get_drvdata(dev);
@@ -75,6 +76,7 @@ static int dw_mci_k3_resume(struct device *dev)
 
 	return dw_mci_resume(host);
 }
+#endif /* CONFIG_PM_SLEEP */
 
 static SIMPLE_DEV_PM_OPS(dw_mci_k3_pmops, dw_mci_k3_suspend, dw_mci_k3_resume);
 
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index 5c4965655297..d4a47a9f5584 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -25,13 +25,17 @@
 #include "dw_mmc.h"
 #include "dw_mmc-pltfm.h"
 
-static void dw_mci_rockchip_prepare_command(struct dw_mci *host, u32 *cmdr)
+static void dw_mci_pltfm_prepare_command(struct dw_mci *host, u32 *cmdr)
 {
 	*cmdr |= SDMMC_CMD_USE_HOLD_REG;
 }
 
 static const struct dw_mci_drv_data rockchip_drv_data = {
-	.prepare_command	= dw_mci_rockchip_prepare_command,
+	.prepare_command	= dw_mci_pltfm_prepare_command,
+};
+
+static const struct dw_mci_drv_data socfpga_drv_data = {
+	.prepare_command	= dw_mci_pltfm_prepare_command,
 };
 
 int dw_mci_pltfm_register(struct platform_device *pdev,
@@ -92,6 +96,8 @@ static const struct of_device_id dw_mci_pltfm_match[] = {
 	{ .compatible = "snps,dw-mshc", },
 	{ .compatible = "rockchip,rk2928-dw-mshc",
 		.data = &rockchip_drv_data },
+	{ .compatible = "altr,socfpga-dw-mshc",
+		.data = &socfpga_drv_data },
 	{},
 };
 MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
@@ -123,7 +129,7 @@ static struct platform_driver dw_mci_pltfm_driver = {
 	.remove		= dw_mci_pltfm_remove,
 	.driver		= {
 		.name		= "dw_mmc",
-		.of_match_table	= of_match_ptr(dw_mci_pltfm_match),
+		.of_match_table	= dw_mci_pltfm_match,
 		.pm		= &dw_mci_pltfm_pmops,
 	},
 };
diff --git a/drivers/mmc/host/dw_mmc-socfpga.c b/drivers/mmc/host/dw_mmc-socfpga.c
deleted file mode 100644
index 3e8e53ae3302..000000000000
--- a/drivers/mmc/host/dw_mmc-socfpga.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * Altera SoCFPGA Specific Extensions for Synopsys DW Multimedia Card Interface
- * driver
- *
- *  Copyright (C) 2012, Samsung Electronics Co., Ltd.
- *  Copyright (C) 2013 Altera Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Taken from dw_mmc-exynos.c
- */
-#include <linux/clk.h>
-#include <linux/mfd/syscon.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/dw_mmc.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-
-#include "dw_mmc.h"
-#include "dw_mmc-pltfm.h"
-
-#define SYSMGR_SDMMCGRP_CTRL_OFFSET		0x108
-#define DRV_CLK_PHASE_SHIFT_SEL_MASK	0x7
-#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel)          \
-	((((smplsel) & 0x7) << 3) | (((drvsel) & 0x7) << 0))
-
-/* SOCFPGA implementation specific driver private data */
-struct dw_mci_socfpga_priv_data {
-	u8	ciu_div; /* card interface unit divisor */
-	u32	hs_timing; /* bitmask for CIU clock phase shift */
-	struct regmap   *sysreg; /* regmap for system manager register */
-};
-
-static int dw_mci_socfpga_priv_init(struct dw_mci *host)
-{
-	return 0;
-}
-
-static int dw_mci_socfpga_setup_clock(struct dw_mci *host)
-{
-	struct dw_mci_socfpga_priv_data *priv = host->priv;
-
-	clk_disable_unprepare(host->ciu_clk);
-	regmap_write(priv->sysreg, SYSMGR_SDMMCGRP_CTRL_OFFSET,
-		priv->hs_timing);
-	clk_prepare_enable(host->ciu_clk);
-
-	host->bus_hz /= (priv->ciu_div + 1);
-	return 0;
-}
-
-static void dw_mci_socfpga_prepare_command(struct dw_mci *host, u32 *cmdr)
-{
-	struct dw_mci_socfpga_priv_data *priv = host->priv;
-
-	if (priv->hs_timing & DRV_CLK_PHASE_SHIFT_SEL_MASK)
-		*cmdr |= SDMMC_CMD_USE_HOLD_REG;
-}
-
-static int dw_mci_socfpga_parse_dt(struct dw_mci *host)
-{
-	struct dw_mci_socfpga_priv_data *priv;
-	struct device_node *np = host->dev->of_node;
-	u32 timing[2];
-	u32 div = 0;
-	int ret;
-
-	priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		dev_err(host->dev, "mem alloc failed for private data\n");
-		return -ENOMEM;
-	}
-
-	priv->sysreg = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
-	if (IS_ERR(priv->sysreg)) {
-		dev_err(host->dev, "regmap for altr,sys-mgr lookup failed.\n");
-		return PTR_ERR(priv->sysreg);
-	}
-
-	ret = of_property_read_u32(np, "altr,dw-mshc-ciu-div", &div);
-	if (ret)
-		dev_info(host->dev, "No dw-mshc-ciu-div specified, assuming 1");
-	priv->ciu_div = div;
-
-	ret = of_property_read_u32_array(np,
-			"altr,dw-mshc-sdr-timing", timing, 2);
-	if (ret)
-		return ret;
-
-	priv->hs_timing = SYSMGR_SDMMC_CTRL_SET(timing[0], timing[1]);
-	host->priv = priv;
-	return 0;
-}
-
-static const struct dw_mci_drv_data socfpga_drv_data = {
-	.init			= dw_mci_socfpga_priv_init,
-	.setup_clock		= dw_mci_socfpga_setup_clock,
-	.prepare_command	= dw_mci_socfpga_prepare_command,
-	.parse_dt		= dw_mci_socfpga_parse_dt,
-};
-
-static const struct of_device_id dw_mci_socfpga_match[] = {
-	{ .compatible = "altr,socfpga-dw-mshc",
-			.data = &socfpga_drv_data, },
-	{},
-};
-MODULE_DEVICE_TABLE(of, dw_mci_socfpga_match);
-
-static int dw_mci_socfpga_probe(struct platform_device *pdev)
-{
-	const struct dw_mci_drv_data *drv_data;
-	const struct of_device_id *match;
-
-	match = of_match_node(dw_mci_socfpga_match, pdev->dev.of_node);
-	drv_data = match->data;
-	return dw_mci_pltfm_register(pdev, drv_data);
-}
-
-static struct platform_driver dw_mci_socfpga_pltfm_driver = {
-	.probe		= dw_mci_socfpga_probe,
-	.remove		= __exit_p(dw_mci_pltfm_remove),
-	.driver		= {
-		.name		= "dwmmc_socfpga",
-		.of_match_table	= dw_mci_socfpga_match,
-		.pm		= &dw_mci_pltfm_pmops,
-	},
-};
-
-module_platform_driver(dw_mci_socfpga_pltfm_driver);
-
-MODULE_DESCRIPTION("Altera SOCFPGA Specific DW-MSHC Driver Extension");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:dwmmc-socfpga");
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index c204b7d1532c..cced599d5aeb 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1345,7 +1345,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
 
 			if (!err) {
 				if (!data->stop || mrq->sbc) {
-					if (mrq->sbc)
+					if (mrq->sbc && data->stop)
 						data->stop->error = 0;
 					dw_mci_request_end(host, mrq);
 					goto unlock;
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 6bf24ab917e6..68349779c396 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -185,7 +185,7 @@
 
 extern int dw_mci_probe(struct dw_mci *host);
 extern void dw_mci_remove(struct dw_mci *host);
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 extern int dw_mci_suspend(struct dw_mci *host);
 extern int dw_mci_resume(struct dw_mci *host);
 #endif
@@ -244,6 +244,7 @@ struct dw_mci_tuning_data {
  * @prepare_command: handle CMD register extensions.
  * @set_ios: handle bus specific extensions.
  * @parse_dt: parse implementation specific device tree properties.
+ * @execute_tuning: implementation specific tuning procedure.
  *
  * Provide controller implementation specific extensions. The usage of this
  * data structure is fully optional and usage of each member in this structure
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index b93122636531..771c60ab4a32 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -921,6 +921,29 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
 {
 	void __iomem *base = host->base;
 	bool sbc = (cmd == host->mrq->sbc);
+	bool busy_resp = host->variant->busy_detect &&
+			(cmd->flags & MMC_RSP_BUSY);
+
+	/* Check if we need to wait for busy completion. */
+	if (host->busy_status && (status & MCI_ST_CARDBUSY))
+		return;
+
+	/* Enable busy completion if needed and supported. */
+	if (!host->busy_status && busy_resp &&
+		!(status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT)) &&
+		(readl(base + MMCISTATUS) & MCI_ST_CARDBUSY)) {
+		writel(readl(base + MMCIMASK0) | MCI_ST_BUSYEND,
+			base + MMCIMASK0);
+		host->busy_status = status & (MCI_CMDSENT|MCI_CMDRESPEND);
+		return;
+	}
+
+	/* At busy completion, mask the IRQ and complete the request. */
+	if (host->busy_status) {
+		writel(readl(base + MMCIMASK0) & ~MCI_ST_BUSYEND,
+			base + MMCIMASK0);
+		host->busy_status = 0;
+	}
 
 	host->cmd = NULL;
 
@@ -1139,20 +1162,30 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
 			status &= ~MCI_IRQ1MASK;
 		}
 
+		/*
+		 * We intentionally clear the MCI_ST_CARDBUSY IRQ here (if it's
+		 * enabled) since the HW seems to be triggering the IRQ on both
+		 * edges while monitoring DAT0 for busy completion.
+		 */
 		status &= readl(host->base + MMCIMASK0);
 		writel(status, host->base + MMCICLEAR);
 
 		dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status);
 
+		cmd = host->cmd;
+		if ((status|host->busy_status) & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|
+			MCI_CMDSENT|MCI_CMDRESPEND) && cmd)
+			mmci_cmd_irq(host, cmd, status);
+
 		data = host->data;
 		if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR|
 			      MCI_TXUNDERRUN|MCI_RXOVERRUN|MCI_DATAEND|
 			      MCI_DATABLOCKEND) && data)
 			mmci_data_irq(host, data, status);
 
-		cmd = host->cmd;
-		if (status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND) && cmd)
-			mmci_cmd_irq(host, cmd, status);
+		/* Don't poll for busy completion in irq context. */
+		if (host->busy_status)
+			status &= ~MCI_ST_CARDBUSY;
 
 		ret = 1;
 	} while (status);
@@ -1503,12 +1536,6 @@ static int mmci_probe(struct amba_device *dev,
 		goto clk_disable;
 	}
 
-	if (variant->busy_detect) {
-		mmci_ops.card_busy = mmci_card_busy;
-		mmci_write_datactrlreg(host, MCI_ST_DPSM_BUSYMODE);
-	}
-
-	mmc->ops = &mmci_ops;
 	/*
 	 * The ARM and ST versions of the block have slightly different
 	 * clock divider equations which means that the minimum divider
@@ -1542,6 +1569,15 @@ static int mmci_probe(struct amba_device *dev,
 	mmc->caps = plat->capabilities;
 	mmc->caps2 = plat->capabilities2;
 
+	if (variant->busy_detect) {
+		mmci_ops.card_busy = mmci_card_busy;
+		mmci_write_datactrlreg(host, MCI_ST_DPSM_BUSYMODE);
+		mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
+		mmc->max_busy_timeout = 0;
+	}
+
+	mmc->ops = &mmci_ops;
+
 	/* We support these PM capabilities. */
 	mmc->pm_caps = MMC_PM_KEEP_POWER;
 
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 84c0e59b792a..58b1b8896bf2 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -140,6 +140,7 @@
 /* Extended status bits for the ST Micro variants */
 #define MCI_ST_SDIOITMASK	(1 << 22)
 #define MCI_ST_CEATAENDMASK	(1 << 23)
+#define MCI_ST_BUSYEND		(1 << 24)
 
 #define MMCIMASK1		0x040
 #define MMCIFIFOCNT		0x048
@@ -187,6 +188,7 @@ struct mmci_host {
 	u32			pwr_reg;
 	u32			clk_reg;
 	u32			datactrl_reg;
+	u32			busy_status;
 	bool			vqmmc_enabled;
 	struct mmci_platform_data *plat;
 	struct variant_data	*variant;
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 98b6b6ef7e5c..5c2e58b29305 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -26,6 +26,7 @@
 #include <linux/omap-dma.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
+#include <linux/mmc/mmc.h>
 #include <linux/clk.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
@@ -130,7 +131,6 @@ struct mmc_omap_host {
 	u32			dma_rx_burst;
 	struct dma_chan		*dma_tx;
 	u32			dma_tx_burst;
-	struct resource		*mem_res;
 	void __iomem		*virt_base;
 	unsigned int		phys_base;
 	int			irq;
@@ -153,7 +153,6 @@ struct mmc_omap_host {
 	u32			total_bytes_left;
 
 	unsigned		features;
-	unsigned		use_dma:1;
 	unsigned		brs_received:1, dma_done:1;
 	unsigned		dma_in_use:1;
 	spinlock_t		dma_lock;
@@ -338,6 +337,7 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
 	u32 cmdreg;
 	u32 resptype;
 	u32 cmdtype;
+	u16 irq_mask;
 
 	host->cmd = cmd;
 
@@ -390,12 +390,14 @@ mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
 	OMAP_MMC_WRITE(host, CTO, 200);
 	OMAP_MMC_WRITE(host, ARGL, cmd->arg & 0xffff);
 	OMAP_MMC_WRITE(host, ARGH, cmd->arg >> 16);
-	OMAP_MMC_WRITE(host, IE,
-		       OMAP_MMC_STAT_A_EMPTY    | OMAP_MMC_STAT_A_FULL    |
-		       OMAP_MMC_STAT_CMD_CRC    | OMAP_MMC_STAT_CMD_TOUT  |
-		       OMAP_MMC_STAT_DATA_CRC   | OMAP_MMC_STAT_DATA_TOUT |
-		       OMAP_MMC_STAT_END_OF_CMD | OMAP_MMC_STAT_CARD_ERR  |
-		       OMAP_MMC_STAT_END_OF_DATA);
+	irq_mask = OMAP_MMC_STAT_A_EMPTY    | OMAP_MMC_STAT_A_FULL    |
+		   OMAP_MMC_STAT_CMD_CRC    | OMAP_MMC_STAT_CMD_TOUT  |
+		   OMAP_MMC_STAT_DATA_CRC   | OMAP_MMC_STAT_DATA_TOUT |
+		   OMAP_MMC_STAT_END_OF_CMD | OMAP_MMC_STAT_CARD_ERR  |
+		   OMAP_MMC_STAT_END_OF_DATA;
+	if (cmd->opcode == MMC_ERASE)
+		irq_mask &= ~OMAP_MMC_STAT_DATA_TOUT;
+	OMAP_MMC_WRITE(host, IE, irq_mask);
 	OMAP_MMC_WRITE(host, CMD, cmdreg);
 }
 
@@ -945,7 +947,7 @@ static void
 mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
 {
 	struct mmc_data *data = req->data;
-	int i, use_dma, block_size;
+	int i, use_dma = 1, block_size;
 	unsigned sg_len;
 
 	host->data = data;
@@ -970,13 +972,10 @@ mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
 	sg_len = (data->blocks == 1) ? 1 : data->sg_len;
 
 	/* Only do DMA for entire blocks */
-	use_dma = host->use_dma;
-	if (use_dma) {
-		for (i = 0; i < sg_len; i++) {
-			if ((data->sg[i].length % block_size) != 0) {
-				use_dma = 0;
-				break;
-			}
+	for (i = 0; i < sg_len; i++) {
+		if ((data->sg[i].length % block_size) != 0) {
+			use_dma = 0;
+			break;
 		}
 	}
 
@@ -1239,7 +1238,7 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
 
 	mmc->caps = 0;
 	if (host->pdata->slots[id].wires >= 4)
-		mmc->caps |= MMC_CAP_4_BIT_DATA;
+		mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_ERASE;
 
 	mmc->ops = &mmc_omap_ops;
 	mmc->f_min = 400000;
@@ -1262,6 +1261,13 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
 	mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
 	mmc->max_seg_size = mmc->max_req_size;
 
+	if (slot->pdata->get_cover_state != NULL) {
+		setup_timer(&slot->cover_timer, mmc_omap_cover_timer,
+			    (unsigned long)slot);
+		tasklet_init(&slot->cover_tasklet, mmc_omap_cover_handler,
+			     (unsigned long)slot);
+	}
+
 	r = mmc_add_host(mmc);
 	if (r < 0)
 		goto err_remove_host;
@@ -1278,11 +1284,6 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id)
 					&dev_attr_cover_switch);
 		if (r < 0)
 			goto err_remove_slot_name;
-
-		setup_timer(&slot->cover_timer, mmc_omap_cover_timer,
-			    (unsigned long)slot);
-		tasklet_init(&slot->cover_tasklet, mmc_omap_cover_handler,
-			     (unsigned long)slot);
 		tasklet_schedule(&slot->cover_tasklet);
 	}
 
@@ -1333,21 +1334,19 @@ static int mmc_omap_probe(struct platform_device *pdev)
 		return -EPROBE_DEFER;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host = devm_kzalloc(&pdev->dev, sizeof(struct mmc_omap_host),
+			    GFP_KERNEL);
+	if (host == NULL)
+		return -ENOMEM;
+
 	irq = platform_get_irq(pdev, 0);
-	if (res == NULL || irq < 0)
+	if (irq < 0)
 		return -ENXIO;
 
-	res = request_mem_region(res->start, resource_size(res),
-				 pdev->name);
-	if (res == NULL)
-		return -EBUSY;
-
-	host = kzalloc(sizeof(struct mmc_omap_host), GFP_KERNEL);
-	if (host == NULL) {
-		ret = -ENOMEM;
-		goto err_free_mem_region;
-	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->virt_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(host->virt_base))
+		return PTR_ERR(host->virt_base);
 
 	INIT_WORK(&host->slot_release_work, mmc_omap_slot_release_work);
 	INIT_WORK(&host->send_stop_work, mmc_omap_send_stop_work);
@@ -1369,20 +1368,11 @@ static int mmc_omap_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, host);
 
 	host->id = pdev->id;
-	host->mem_res = res;
-	host->irq = irq;
-	host->use_dma = 1;
 	host->irq = irq;
-	host->phys_base = host->mem_res->start;
-	host->virt_base = ioremap(res->start, resource_size(res));
-	if (!host->virt_base)
-		goto err_ioremap;
-
+	host->phys_base = res->start;
 	host->iclk = clk_get(&pdev->dev, "ick");
-	if (IS_ERR(host->iclk)) {
-		ret = PTR_ERR(host->iclk);
-		goto err_free_mmc_host;
-	}
+	if (IS_ERR(host->iclk))
+		return PTR_ERR(host->iclk);
 	clk_enable(host->iclk);
 
 	host->fclk = clk_get(&pdev->dev, "fck");
@@ -1460,12 +1450,6 @@ err_free_dma:
 err_free_iclk:
 	clk_disable(host->iclk);
 	clk_put(host->iclk);
-err_free_mmc_host:
-	iounmap(host->virt_base);
-err_ioremap:
-	kfree(host);
-err_free_mem_region:
-	release_mem_region(res->start, resource_size(res));
 	return ret;
 }
 
@@ -1493,13 +1477,8 @@ static int mmc_omap_remove(struct platform_device *pdev)
 	if (host->dma_rx)
 		dma_release_channel(host->dma_rx);
 
-	iounmap(host->virt_base);
-	release_mem_region(pdev->resource[0].start,
-			   pdev->resource[0].end - pdev->resource[0].start + 1);
 	destroy_workqueue(host->mmc_omap_wq);
 
-	kfree(host);
-
 	return 0;
 }
 
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index dbd32ad3b749..e91ee21549d0 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -45,6 +45,7 @@
 /* OMAP HSMMC Host Controller Registers */
 #define OMAP_HSMMC_SYSSTATUS	0x0014
 #define OMAP_HSMMC_CON		0x002C
+#define OMAP_HSMMC_SDMASA	0x0100
 #define OMAP_HSMMC_BLK		0x0104
 #define OMAP_HSMMC_ARG		0x0108
 #define OMAP_HSMMC_CMD		0x010C
@@ -58,6 +59,7 @@
 #define OMAP_HSMMC_STAT		0x0130
 #define OMAP_HSMMC_IE		0x0134
 #define OMAP_HSMMC_ISE		0x0138
+#define OMAP_HSMMC_AC12		0x013C
 #define OMAP_HSMMC_CAPA		0x0140
 
 #define VS18			(1 << 26)
@@ -81,6 +83,7 @@
 #define DTO_MASK		0x000F0000
 #define DTO_SHIFT		16
 #define INIT_STREAM		(1 << 1)
+#define ACEN_ACMD23		(2 << 2)
 #define DP_SELECT		(1 << 21)
 #define DDIR			(1 << 4)
 #define DMAE			0x1
@@ -97,7 +100,6 @@
 #define SRC			(1 << 25)
 #define SRD			(1 << 26)
 #define SOFTRESET		(1 << 1)
-#define RESETDONE		(1 << 0)
 
 /* Interrupt masks for IE and ISE register */
 #define CC_EN			(1 << 0)
@@ -112,13 +114,21 @@
 #define DTO_EN			(1 << 20)
 #define DCRC_EN			(1 << 21)
 #define DEB_EN			(1 << 22)
+#define ACE_EN			(1 << 24)
 #define CERR_EN			(1 << 28)
 #define BADA_EN			(1 << 29)
 
-#define INT_EN_MASK		(BADA_EN | CERR_EN | DEB_EN | DCRC_EN |\
+#define INT_EN_MASK (BADA_EN | CERR_EN | ACE_EN | DEB_EN | DCRC_EN |\
 		DTO_EN | CIE_EN | CEB_EN | CCRC_EN | CTO_EN | \
 		BRR_EN | BWR_EN | TC_EN | CC_EN)
 
+#define CNI	(1 << 7)
+#define ACIE	(1 << 4)
+#define ACEB	(1 << 3)
+#define ACCE	(1 << 2)
+#define ACTO	(1 << 1)
+#define ACNE	(1 << 0)
+
 #define MMC_AUTOSUSPEND_DELAY	100
 #define MMC_TIMEOUT_MS		20		/* 20 mSec */
 #define MMC_TIMEOUT_US		20000		/* 20000 micro Sec */
@@ -126,6 +136,11 @@
 #define OMAP_MMC_MAX_CLOCK	52000000
 #define DRIVER_NAME		"omap_hsmmc"
 
+#define VDD_1V8			1800000		/* 180000 uV */
+#define VDD_3V0			3000000		/* 300000 uV */
+#define VDD_165_195		(ffs(MMC_VDD_165_195) - 1)
+
+#define AUTO_CMD23		(1 << 1)	/* Auto CMD23 support */
 /*
  * One controller can have multiple slots, like on some omap boards using
  * omap.c controller driver. Luckily this is not currently done on any known
@@ -164,7 +179,8 @@ struct omap_hsmmc_host {
 	 */
 	struct	regulator	*vcc;
 	struct	regulator	*vcc_aux;
-	int			pbias_disable;
+	struct	regulator	*pbias;
+	bool			pbias_enabled;
 	void	__iomem		*base;
 	resource_size_t		mapbase;
 	spinlock_t		irq_lock; /* Prevent races with irq handler */
@@ -188,10 +204,19 @@ struct omap_hsmmc_host {
 	int			reqs_blocked;
 	int			use_reg;
 	int			req_in_progress;
+	unsigned long		clk_rate;
+	unsigned int		flags;
 	struct omap_hsmmc_next	next_data;
 	struct	omap_mmc_platform_data	*pdata;
 };
 
+struct omap_mmc_of_data {
+	u32 reg_offset;
+	u8 controller_flags;
+};
+
+static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host);
+
 static int omap_hsmmc_card_detect(struct device *dev, int slot)
 {
 	struct omap_hsmmc_host *host = dev_get_drvdata(dev);
@@ -261,17 +286,19 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
 	 */
 	if (!host->vcc)
 		return 0;
-	/*
-	 * With DT, never turn OFF the regulator for MMC1. This is because
-	 * the pbias cell programming support is still missing when
-	 * booting with Device tree
-	 */
-	if (host->pbias_disable && !vdd)
-		return 0;
 
 	if (mmc_slot(host).before_set_reg)
 		mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
 
+	if (host->pbias) {
+		if (host->pbias_enabled == 1) {
+			ret = regulator_disable(host->pbias);
+			if (!ret)
+				host->pbias_enabled = 0;
+		}
+		regulator_set_voltage(host->pbias, VDD_3V0, VDD_3V0);
+	}
+
 	/*
 	 * Assume Vcc regulator is used only to power the card ... OMAP
 	 * VDDS is used to power the pins, optionally with a transceiver to
@@ -286,11 +313,12 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
 	 * chips/cards need an interface voltage rail too.
 	 */
 	if (power_on) {
-		ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
+		if (host->vcc)
+			ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
 		/* Enable interface voltage rail, if needed */
 		if (ret == 0 && host->vcc_aux) {
 			ret = regulator_enable(host->vcc_aux);
-			if (ret < 0)
+			if (ret < 0 && host->vcc)
 				ret = mmc_regulator_set_ocr(host->mmc,
 							host->vcc, 0);
 		}
@@ -298,16 +326,34 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
 		/* Shut down the rail */
 		if (host->vcc_aux)
 			ret = regulator_disable(host->vcc_aux);
-		if (!ret) {
+		if (host->vcc) {
 			/* Then proceed to shut down the local regulator */
 			ret = mmc_regulator_set_ocr(host->mmc,
 						host->vcc, 0);
 		}
 	}
 
+	if (host->pbias) {
+		if (vdd <= VDD_165_195)
+			ret = regulator_set_voltage(host->pbias, VDD_1V8,
+								VDD_1V8);
+		else
+			ret = regulator_set_voltage(host->pbias, VDD_3V0,
+								VDD_3V0);
+		if (ret < 0)
+			goto error_set_power;
+
+		if (host->pbias_enabled == 0) {
+			ret = regulator_enable(host->pbias);
+			if (!ret)
+				host->pbias_enabled = 1;
+		}
+	}
+
 	if (mmc_slot(host).after_set_reg)
 		mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
 
+error_set_power:
 	return ret;
 }
 
@@ -316,12 +362,12 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 	struct regulator *reg;
 	int ocr_value = 0;
 
-	reg = regulator_get(host->dev, "vmmc");
+	reg = devm_regulator_get(host->dev, "vmmc");
 	if (IS_ERR(reg)) {
-		dev_err(host->dev, "vmmc regulator missing\n");
+		dev_err(host->dev, "unable to get vmmc regulator %ld\n",
+			PTR_ERR(reg));
 		return PTR_ERR(reg);
 	} else {
-		mmc_slot(host).set_power = omap_hsmmc_set_power;
 		host->vcc = reg;
 		ocr_value = mmc_regulator_get_ocrmask(reg);
 		if (!mmc_slot(host).ocr_mask) {
@@ -334,31 +380,29 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 				return -EINVAL;
 			}
 		}
+	}
+	mmc_slot(host).set_power = omap_hsmmc_set_power;
 
-		/* Allow an aux regulator */
-		reg = regulator_get(host->dev, "vmmc_aux");
-		host->vcc_aux = IS_ERR(reg) ? NULL : reg;
+	/* Allow an aux regulator */
+	reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
+	host->vcc_aux = IS_ERR(reg) ? NULL : reg;
 
-		/* For eMMC do not power off when not in sleep state */
-		if (mmc_slot(host).no_regulator_off_init)
-			return 0;
-		/*
-		* UGLY HACK:  workaround regulator framework bugs.
-		* When the bootloader leaves a supply active, it's
-		* initialized with zero usecount ... and we can't
-		* disable it without first enabling it.  Until the
-		* framework is fixed, we need a workaround like this
-		* (which is safe for MMC, but not in general).
-		*/
-		if (regulator_is_enabled(host->vcc) > 0 ||
-		    (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
-			int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
+	reg = devm_regulator_get_optional(host->dev, "pbias");
+	host->pbias = IS_ERR(reg) ? NULL : reg;
 
-			mmc_slot(host).set_power(host->dev, host->slot_id,
-						 1, vdd);
-			mmc_slot(host).set_power(host->dev, host->slot_id,
-						 0, 0);
-		}
+	/* For eMMC do not power off when not in sleep state */
+	if (mmc_slot(host).no_regulator_off_init)
+		return 0;
+	/*
+	 * To disable boot_on regulator, enable regulator
+	 * to increase usecount and then disable it.
+	 */
+	if ((host->vcc && regulator_is_enabled(host->vcc) > 0) ||
+	    (host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
+		int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
+
+		mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
+		mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
 	}
 
 	return 0;
@@ -366,8 +410,6 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 
 static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host)
 {
-	regulator_put(host->vcc);
-	regulator_put(host->vcc_aux);
 	mmc_slot(host).set_power = NULL;
 }
 
@@ -605,9 +647,6 @@ static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host)
 	u32 hctl, capa;
 	unsigned long timeout;
 
-	if (!OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE)
-		return 1;
-
 	if (host->con == OMAP_HSMMC_READ(host->base, CON) &&
 	    host->hctl == OMAP_HSMMC_READ(host->base, HCTL) &&
 	    host->sysctl == OMAP_HSMMC_READ(host->base, SYSCTL) &&
@@ -787,6 +826,11 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd,
 
 	cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22);
 
+	if ((host->flags & AUTO_CMD23) && mmc_op_multi(cmd->opcode) &&
+	    host->mrq->sbc) {
+		cmdreg |= ACEN_ACMD23;
+		OMAP_HSMMC_WRITE(host->base, SDMASA, host->mrq->sbc->arg);
+	}
 	if (data) {
 		cmdreg |= DP_SELECT | MSBS | BCE;
 		if (data->flags & MMC_DATA_READ)
@@ -864,11 +908,10 @@ omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data)
 	else
 		data->bytes_xfered = 0;
 
-	if (!data->stop) {
+	if (data->stop && (data->error || !host->mrq->sbc))
+		omap_hsmmc_start_command(host, data->stop, NULL);
+	else
 		omap_hsmmc_request_done(host, data->mrq);
-		return;
-	}
-	omap_hsmmc_start_command(host, data->stop, NULL);
 }
 
 /*
@@ -879,6 +922,14 @@ omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd)
 {
 	host->cmd = NULL;
 
+	if (host->mrq->sbc && (host->cmd == host->mrq->sbc) &&
+	    !host->mrq->sbc->error && !(host->flags & AUTO_CMD23)) {
+		omap_hsmmc_start_dma_transfer(host);
+		omap_hsmmc_start_command(host, host->mrq->cmd,
+						host->mrq->data);
+		return;
+	}
+
 	if (cmd->flags & MMC_RSP_PRESENT) {
 		if (cmd->flags & MMC_RSP_136) {
 			/* response type 2 */
@@ -892,7 +943,7 @@ omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd)
 		}
 	}
 	if ((host->data == NULL && !host->response_busy) || cmd->error)
-		omap_hsmmc_request_done(host, cmd->mrq);
+		omap_hsmmc_request_done(host, host->mrq);
 }
 
 /*
@@ -1015,6 +1066,7 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
 {
 	struct mmc_data *data;
 	int end_cmd = 0, end_trans = 0;
+	int error = 0;
 
 	data = host->data;
 	dev_vdbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
@@ -1029,6 +1081,20 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status)
 		else if (status & (CCRC_EN | DCRC_EN))
 			hsmmc_command_incomplete(host, -EILSEQ, end_cmd);
 
+		if (status & ACE_EN) {
+			u32 ac12;
+			ac12 = OMAP_HSMMC_READ(host->base, AC12);
+			if (!(ac12 & ACNE) && host->mrq->sbc) {
+				end_cmd = 1;
+				if (ac12 & ACTO)
+					error =  -ETIMEDOUT;
+				else if (ac12 & (ACCE | ACEB | ACIE))
+					error = -EILSEQ;
+				host->mrq->sbc->error = error;
+				hsmmc_command_incomplete(host, error, end_cmd);
+			}
+			dev_dbg(mmc_dev(host->mmc), "AC12 err: 0x%x\n", ac12);
+		}
 		if (host->data || host->response_busy) {
 			end_trans = !end_cmd;
 			host->response_busy = 0;
@@ -1236,8 +1302,7 @@ static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host,
 	}
 
 	/* Check if next job is already prepared */
-	if (next ||
-	    (!next && data->host_cookie != host->next_data.cookie)) {
+	if (next || data->host_cookie != host->next_data.cookie) {
 		dma_len = dma_map_sg(chan->device->dev, data->sg, data->sg_len,
 				     omap_hsmmc_get_dma_dir(host, data));
 
@@ -1262,7 +1327,7 @@ static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host,
 /*
  * Routine to configure and start DMA for the MMC card
  */
-static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host,
+static int omap_hsmmc_setup_dma_transfer(struct omap_hsmmc_host *host,
 					struct mmc_request *req)
 {
 	struct dma_slave_config cfg;
@@ -1321,8 +1386,6 @@ static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host,
 
 	host->dma_ch = 1;
 
-	dma_async_issue_pending(chan);
-
 	return 0;
 }
 
@@ -1338,7 +1401,7 @@ static void set_data_timeout(struct omap_hsmmc_host *host,
 	if (clkd == 0)
 		clkd = 1;
 
-	cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd);
+	cycle_ns = 1000000000 / (host->clk_rate / clkd);
 	timeout = timeout_ns / cycle_ns;
 	timeout += timeout_clks;
 	if (timeout) {
@@ -1363,6 +1426,21 @@ static void set_data_timeout(struct omap_hsmmc_host *host,
 	OMAP_HSMMC_WRITE(host->base, SYSCTL, reg);
 }
 
+static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host)
+{
+	struct mmc_request *req = host->mrq;
+	struct dma_chan *chan;
+
+	if (!req->data)
+		return;
+	OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
+				| (req->data->blocks << 16));
+	set_data_timeout(host, req->data->timeout_ns,
+				req->data->timeout_clks);
+	chan = omap_hsmmc_get_dma_chan(host, req->data);
+	dma_async_issue_pending(chan);
+}
+
 /*
  * Configure block length for MMC/SD cards and initiate the transfer.
  */
@@ -1383,12 +1461,8 @@ omap_hsmmc_prepare_data(struct omap_hsmmc_host *host, struct mmc_request *req)
 		return 0;
 	}
 
-	OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz)
-					| (req->data->blocks << 16));
-	set_data_timeout(host, req->data->timeout_ns, req->data->timeout_clks);
-
 	if (host->use_dma) {
-		ret = omap_hsmmc_start_dma_transfer(host, req);
+		ret = omap_hsmmc_setup_dma_transfer(host, req);
 		if (ret != 0) {
 			dev_err(mmc_dev(host->mmc), "MMC start dma failure\n");
 			return ret;
@@ -1462,6 +1536,7 @@ static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req)
 		host->reqs_blocked = 0;
 	WARN_ON(host->mrq != NULL);
 	host->mrq = req;
+	host->clk_rate = clk_get_rate(host->fclk);
 	err = omap_hsmmc_prepare_data(host, req);
 	if (err) {
 		req->cmd->error = err;
@@ -1471,7 +1546,12 @@ static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req)
 		mmc_request_done(mmc, req);
 		return;
 	}
+	if (req->sbc && !(host->flags & AUTO_CMD23)) {
+		omap_hsmmc_start_command(host, req->sbc, NULL);
+		return;
+	}
 
+	omap_hsmmc_start_dma_transfer(host);
 	omap_hsmmc_start_command(host, req->cmd, req->data);
 }
 
@@ -1509,13 +1589,7 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		 * of external transceiver; but they all handle 1.8V.
 		 */
 		if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) &&
-			(ios->vdd == DUAL_VOLT_OCR_BIT) &&
-			/*
-			 * With pbias cell programming missing, this
-			 * can't be allowed on MMC1 when booting with device
-			 * tree.
-			 */
-			!host->pbias_disable) {
+			(ios->vdd == DUAL_VOLT_OCR_BIT)) {
 				/*
 				 * The mmc_select_voltage fn of the core does
 				 * not seem to set the power_mode to
@@ -1678,18 +1752,29 @@ static void omap_hsmmc_debugfs(struct mmc_host *mmc)
 #endif
 
 #ifdef CONFIG_OF
-static u16 omap4_reg_offset = 0x100;
+static const struct omap_mmc_of_data omap3_pre_es3_mmc_of_data = {
+	/* See 35xx errata 2.1.1.128 in SPRZ278F */
+	.controller_flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
+};
+
+static const struct omap_mmc_of_data omap4_mmc_of_data = {
+	.reg_offset = 0x100,
+};
 
 static const struct of_device_id omap_mmc_of_match[] = {
 	{
 		.compatible = "ti,omap2-hsmmc",
 	},
 	{
+		.compatible = "ti,omap3-pre-es3-hsmmc",
+		.data = &omap3_pre_es3_mmc_of_data,
+	},
+	{
 		.compatible = "ti,omap3-hsmmc",
 	},
 	{
 		.compatible = "ti,omap4-hsmmc",
-		.data = &omap4_reg_offset,
+		.data = &omap4_mmc_of_data,
 	},
 	{},
 };
@@ -1709,7 +1794,7 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
-		return NULL; /* out of memory */
+		return ERR_PTR(-ENOMEM); /* out of memory */
 
 	if (of_find_property(np, "ti,dual-volt", NULL))
 		pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
@@ -1738,13 +1823,19 @@ static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
 	if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
 		pdata->slots[0].features |= HSMMC_HAS_HSPE_SUPPORT;
 
+	if (of_find_property(np, "keep-power-in-suspend", NULL))
+		pdata->slots[0].pm_caps |= MMC_PM_KEEP_POWER;
+
+	if (of_find_property(np, "enable-sdio-wakeup", NULL))
+		pdata->slots[0].pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+
 	return pdata;
 }
 #else
 static inline struct omap_mmc_platform_data
 			*of_get_hsmmc_pdata(struct device *dev)
 {
-	return NULL;
+	return ERR_PTR(-EINVAL);
 }
 #endif
 
@@ -1759,6 +1850,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	dma_cap_mask_t mask;
 	unsigned tx_req, rx_req;
 	struct pinctrl *pinctrl;
+	const struct omap_mmc_of_data *data;
 
 	match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev);
 	if (match) {
@@ -1768,8 +1860,9 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 			return PTR_ERR(pdata);
 
 		if (match->data) {
-			const u16 *offsetp = match->data;
-			pdata->reg_offset = *offsetp;
+			data = match->data;
+			pdata->reg_offset = data->reg_offset;
+			pdata->controller_flags |= data->controller_flags;
 		}
 	}
 
@@ -1814,6 +1907,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 	host->base	= ioremap(host->mapbase, SZ_4K);
 	host->power_mode = MMC_POWER_OFF;
 	host->next_data.cookie = 1;
+	host->pbias_enabled = 0;
 
 	platform_set_drvdata(pdev, host);
 
@@ -1847,10 +1941,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 
 	omap_hsmmc_context_save(host);
 
-	/* This can be removed once we support PBIAS with DT */
-	if (host->dev->of_node && res->start == 0x4809c000)
-		host->pbias_disable = 1;
-
 	host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck");
 	/*
 	 * MMC can still work without debounce clock.
diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index c46feda07d56..5fb994f9a653 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -31,14 +31,9 @@
 #include <linux/mfd/rtsx_pci.h>
 #include <asm/unaligned.h>
 
-/* SD Tuning Data Structure
- * Record continuous timing phase path
- */
-struct timing_phase_path {
-	int start;
-	int end;
-	int mid;
-	int len;
+struct realtek_next {
+	unsigned int	sg_count;
+	s32		cookie;
 };
 
 struct realtek_pci_sdmmc {
@@ -46,9 +41,18 @@ struct realtek_pci_sdmmc {
 	struct rtsx_pcr		*pcr;
 	struct mmc_host		*mmc;
 	struct mmc_request	*mrq;
-
-	struct mutex		host_mutex;
-
+	struct mmc_command	*cmd;
+	struct mmc_data		*data;
+
+	spinlock_t		lock;
+	struct timer_list	timer;
+	struct tasklet_struct	cmd_tasklet;
+	struct tasklet_struct	data_tasklet;
+	struct tasklet_struct	finish_tasklet;
+
+	u8			rsp_type;
+	u8			rsp_len;
+	int			sg_count;
 	u8			ssc_depth;
 	unsigned int		clock;
 	bool			vpclk;
@@ -58,8 +62,13 @@ struct realtek_pci_sdmmc {
 	int			power_state;
 #define SDMMC_POWER_ON		1
 #define SDMMC_POWER_OFF		0
+
+	struct realtek_next	next_data;
 };
 
+static int sd_start_multi_rw(struct realtek_pci_sdmmc *host,
+		struct mmc_request *mrq);
+
 static inline struct device *sdmmc_dev(struct realtek_pci_sdmmc *host)
 {
 	return &(host->pdev->dev);
@@ -96,6 +105,95 @@ static void sd_print_debug_regs(struct realtek_pci_sdmmc *host)
 #define sd_print_debug_regs(host)
 #endif /* DEBUG */
 
+static void sd_isr_done_transfer(struct platform_device *pdev)
+{
+	struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev);
+
+	spin_lock(&host->lock);
+	if (host->cmd)
+		tasklet_schedule(&host->cmd_tasklet);
+	if (host->data)
+		tasklet_schedule(&host->data_tasklet);
+	spin_unlock(&host->lock);
+}
+
+static void sd_request_timeout(unsigned long host_addr)
+{
+	struct realtek_pci_sdmmc *host = (struct realtek_pci_sdmmc *)host_addr;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (!host->mrq) {
+		dev_err(sdmmc_dev(host), "error: no request exist\n");
+		goto out;
+	}
+
+	if (host->cmd)
+		host->cmd->error = -ETIMEDOUT;
+	if (host->data)
+		host->data->error = -ETIMEDOUT;
+
+	dev_dbg(sdmmc_dev(host), "timeout for request\n");
+
+out:
+	tasklet_schedule(&host->finish_tasklet);
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void sd_finish_request(unsigned long host_addr)
+{
+	struct realtek_pci_sdmmc *host = (struct realtek_pci_sdmmc *)host_addr;
+	struct rtsx_pcr *pcr = host->pcr;
+	struct mmc_request *mrq;
+	struct mmc_command *cmd;
+	struct mmc_data *data;
+	unsigned long flags;
+	bool any_error;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	del_timer(&host->timer);
+	mrq = host->mrq;
+	if (!mrq) {
+		dev_err(sdmmc_dev(host), "error: no request need finish\n");
+		goto out;
+	}
+
+	cmd = mrq->cmd;
+	data = mrq->data;
+
+	any_error = (mrq->sbc && mrq->sbc->error) ||
+		(mrq->stop && mrq->stop->error) ||
+		(cmd && cmd->error) || (data && data->error);
+
+	if (any_error) {
+		rtsx_pci_stop_cmd(pcr);
+		sd_clear_error(host);
+	}
+
+	if (data) {
+		if (any_error)
+			data->bytes_xfered = 0;
+		else
+			data->bytes_xfered = data->blocks * data->blksz;
+
+		if (!data->host_cookie)
+			rtsx_pci_dma_unmap_sg(pcr, data->sg, data->sg_len,
+					data->flags & MMC_DATA_READ);
+
+	}
+
+	host->mrq = NULL;
+	host->cmd = NULL;
+	host->data = NULL;
+
+out:
+	spin_unlock_irqrestore(&host->lock, flags);
+	mutex_unlock(&pcr->pcr_mutex);
+	mmc_request_done(host->mmc, mrq);
+}
+
 static int sd_read_data(struct realtek_pci_sdmmc *host, u8 *cmd, u16 byte_cnt,
 		u8 *buf, int buf_len, int timeout)
 {
@@ -213,8 +311,7 @@ static int sd_write_data(struct realtek_pci_sdmmc *host, u8 *cmd, u16 byte_cnt,
 	return 0;
 }
 
-static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
-		struct mmc_command *cmd)
+static void sd_send_cmd(struct realtek_pci_sdmmc *host, struct mmc_command *cmd)
 {
 	struct rtsx_pcr *pcr = host->pcr;
 	u8 cmd_idx = (u8)cmd->opcode;
@@ -222,11 +319,14 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
 	int err = 0;
 	int timeout = 100;
 	int i;
-	u8 *ptr;
-	int stat_idx = 0;
 	u8 rsp_type;
 	int rsp_len = 5;
-	bool clock_toggled = false;
+	unsigned long flags;
+
+	if (host->cmd)
+		dev_err(sdmmc_dev(host), "error: cmd already exist\n");
+
+	host->cmd = cmd;
 
 	dev_dbg(sdmmc_dev(host), "%s: SD/MMC CMD %d, arg = 0x%08x\n",
 			__func__, cmd_idx, arg);
@@ -261,6 +361,8 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
 		err = -EINVAL;
 		goto out;
 	}
+	host->rsp_type = rsp_type;
+	host->rsp_len = rsp_len;
 
 	if (rsp_type == SD_RSP_TYPE_R1b)
 		timeout = 3000;
@@ -270,8 +372,6 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
 				0xFF, SD_CLK_TOGGLE_EN);
 		if (err < 0)
 			goto out;
-
-		clock_toggled = true;
 	}
 
 	rtsx_pci_init_cmd(pcr);
@@ -295,25 +395,60 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
 		/* Read data from ping-pong buffer */
 		for (i = PPBUF_BASE2; i < PPBUF_BASE2 + 16; i++)
 			rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0);
-		stat_idx = 16;
 	} else if (rsp_type != SD_RSP_TYPE_R0) {
 		/* Read data from SD_CMDx registers */
 		for (i = SD_CMD0; i <= SD_CMD4; i++)
 			rtsx_pci_add_cmd(pcr, READ_REG_CMD, (u16)i, 0, 0);
-		stat_idx = 5;
 	}
 
 	rtsx_pci_add_cmd(pcr, READ_REG_CMD, SD_STAT1, 0, 0);
 
-	err = rtsx_pci_send_cmd(pcr, timeout);
-	if (err < 0) {
-		sd_print_debug_regs(host);
-		sd_clear_error(host);
-		dev_dbg(sdmmc_dev(host),
-			"rtsx_pci_send_cmd error (err = %d)\n", err);
+	mod_timer(&host->timer, jiffies + msecs_to_jiffies(timeout));
+
+	spin_lock_irqsave(&pcr->lock, flags);
+	pcr->trans_result = TRANS_NOT_READY;
+	rtsx_pci_send_cmd_no_wait(pcr);
+	spin_unlock_irqrestore(&pcr->lock, flags);
+
+	return;
+
+out:
+	cmd->error = err;
+	tasklet_schedule(&host->finish_tasklet);
+}
+
+static void sd_get_rsp(unsigned long host_addr)
+{
+	struct realtek_pci_sdmmc *host = (struct realtek_pci_sdmmc *)host_addr;
+	struct rtsx_pcr *pcr = host->pcr;
+	struct mmc_command *cmd;
+	int i, err = 0, stat_idx;
+	u8 *ptr, rsp_type;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	cmd = host->cmd;
+	host->cmd = NULL;
+
+	if (!cmd) {
+		dev_err(sdmmc_dev(host), "error: cmd not exist\n");
 		goto out;
 	}
 
+	spin_lock(&pcr->lock);
+	if (pcr->trans_result == TRANS_NO_DEVICE)
+		err = -ENODEV;
+	else if (pcr->trans_result != TRANS_RESULT_OK)
+		err = -EINVAL;
+	spin_unlock(&pcr->lock);
+
+	if (err < 0)
+		goto out;
+
+	rsp_type = host->rsp_type;
+	stat_idx = host->rsp_len;
+
 	if (rsp_type == SD_RSP_TYPE_R0) {
 		err = 0;
 		goto out;
@@ -350,26 +485,106 @@ static void sd_send_cmd_get_rsp(struct realtek_pci_sdmmc *host,
 				cmd->resp[0]);
 	}
 
+	if (cmd == host->mrq->sbc) {
+		sd_send_cmd(host, host->mrq->cmd);
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
+	}
+
+	if (cmd == host->mrq->stop)
+		goto out;
+
+	if (cmd->data) {
+		sd_start_multi_rw(host, host->mrq);
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
+	}
+
 out:
 	cmd->error = err;
 
-	if (err && clock_toggled)
-		rtsx_pci_write_register(pcr, SD_BUS_STAT,
-				SD_CLK_TOGGLE_EN | SD_CLK_FORCE_STOP, 0);
+	tasklet_schedule(&host->finish_tasklet);
+	spin_unlock_irqrestore(&host->lock, flags);
 }
 
-static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq)
+static int sd_pre_dma_transfer(struct realtek_pci_sdmmc *host,
+			struct mmc_data *data, struct realtek_next *next)
+{
+	struct rtsx_pcr *pcr = host->pcr;
+	int read = data->flags & MMC_DATA_READ;
+	int sg_count = 0;
+
+	if (!next && data->host_cookie &&
+		data->host_cookie != host->next_data.cookie) {
+		dev_err(sdmmc_dev(host),
+			"error: invalid cookie data[%d] host[%d]\n",
+			data->host_cookie, host->next_data.cookie);
+		data->host_cookie = 0;
+	}
+
+	if (next || (!next && data->host_cookie != host->next_data.cookie))
+		sg_count = rtsx_pci_dma_map_sg(pcr,
+				data->sg, data->sg_len, read);
+	else
+		sg_count = host->next_data.sg_count;
+
+	if (next) {
+		next->sg_count = sg_count;
+		if (++next->cookie < 0)
+			next->cookie = 1;
+		data->host_cookie = next->cookie;
+	}
+
+	return sg_count;
+}
+
+static void sdmmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq,
+		bool is_first_req)
+{
+	struct realtek_pci_sdmmc *host = mmc_priv(mmc);
+	struct mmc_data *data = mrq->data;
+
+	if (data->host_cookie) {
+		dev_err(sdmmc_dev(host),
+			"error: descard already cookie data[%d]\n",
+			data->host_cookie);
+		data->host_cookie = 0;
+	}
+
+	dev_dbg(sdmmc_dev(host), "dma sg prepared: %d\n",
+		sd_pre_dma_transfer(host, data, &host->next_data));
+}
+
+static void sdmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
+		int err)
+{
+	struct realtek_pci_sdmmc *host = mmc_priv(mmc);
+	struct rtsx_pcr *pcr = host->pcr;
+	struct mmc_data *data = mrq->data;
+	int read = data->flags & MMC_DATA_READ;
+
+	rtsx_pci_dma_unmap_sg(pcr, data->sg, data->sg_len, read);
+	data->host_cookie = 0;
+}
+
+static int sd_start_multi_rw(struct realtek_pci_sdmmc *host,
+		struct mmc_request *mrq)
 {
 	struct rtsx_pcr *pcr = host->pcr;
 	struct mmc_host *mmc = host->mmc;
 	struct mmc_card *card = mmc->card;
 	struct mmc_data *data = mrq->data;
 	int uhs = mmc_card_uhs(card);
-	int read = (data->flags & MMC_DATA_READ) ? 1 : 0;
+	int read = data->flags & MMC_DATA_READ;
 	u8 cfg2, trans_mode;
 	int err;
 	size_t data_len = data->blksz * data->blocks;
 
+	if (host->data)
+		dev_err(sdmmc_dev(host), "error: data already exist\n");
+
+	host->data = data;
+
 	if (read) {
 		cfg2 = SD_CALCULATE_CRC7 | SD_CHECK_CRC16 |
 			SD_NO_WAIT_BUSY_END | SD_CHECK_CRC7 | SD_RSP_LEN_0;
@@ -420,17 +635,56 @@ static int sd_rw_multi(struct realtek_pci_sdmmc *host, struct mmc_request *mrq)
 	rtsx_pci_add_cmd(pcr, CHECK_REG_CMD, SD_TRANSFER,
 			SD_TRANSFER_END, SD_TRANSFER_END);
 
+	mod_timer(&host->timer, jiffies + 10 * HZ);
 	rtsx_pci_send_cmd_no_wait(pcr);
 
-	err = rtsx_pci_transfer_data(pcr, data->sg, data->sg_len, read, 10000);
+	err = rtsx_pci_dma_transfer(pcr, data->sg, host->sg_count, read);
 	if (err < 0) {
-		sd_clear_error(host);
-		return err;
+		data->error = err;
+		tasklet_schedule(&host->finish_tasklet);
 	}
-
 	return 0;
 }
 
+static void sd_finish_multi_rw(unsigned long host_addr)
+{
+	struct realtek_pci_sdmmc *host = (struct realtek_pci_sdmmc *)host_addr;
+	struct rtsx_pcr *pcr = host->pcr;
+	struct mmc_data *data;
+	int err = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (!host->data) {
+		dev_err(sdmmc_dev(host), "error: no data exist\n");
+		goto out;
+	}
+
+	data = host->data;
+	host->data = NULL;
+
+	if (pcr->trans_result == TRANS_NO_DEVICE)
+		err = -ENODEV;
+	else if (pcr->trans_result != TRANS_RESULT_OK)
+		err = -EINVAL;
+
+	if (err < 0) {
+		data->error = err;
+		goto out;
+	}
+
+	if (!host->mrq->sbc && data->stop) {
+		sd_send_cmd(host, data->stop);
+		spin_unlock_irqrestore(&host->lock, flags);
+		return;
+	}
+
+out:
+	tasklet_schedule(&host->finish_tasklet);
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
 static inline void sd_enable_initial_mode(struct realtek_pci_sdmmc *host)
 {
 	rtsx_pci_write_register(host->pcr, SD_CFG1,
@@ -511,85 +765,47 @@ static int sd_change_phase(struct realtek_pci_sdmmc *host,
 	return 0;
 }
 
-static u8 sd_search_final_phase(struct realtek_pci_sdmmc *host, u32 phase_map)
+static inline u32 test_phase_bit(u32 phase_map, unsigned int bit)
 {
-	struct timing_phase_path path[MAX_PHASE + 1];
-	int i, j, cont_path_cnt;
-	int new_block, max_len, final_path_idx;
-	u8 final_phase = 0xFF;
+	bit %= RTSX_PHASE_MAX;
+	return phase_map & (1 << bit);
+}
 
-	/* Parse phase_map, take it as a bit-ring */
-	cont_path_cnt = 0;
-	new_block = 1;
-	j = 0;
-	for (i = 0; i < MAX_PHASE + 1; i++) {
-		if (phase_map & (1 << i)) {
-			if (new_block) {
-				new_block = 0;
-				j = cont_path_cnt++;
-				path[j].start = i;
-				path[j].end = i;
-			} else {
-				path[j].end = i;
-			}
-		} else {
-			new_block = 1;
-			if (cont_path_cnt) {
-				/* Calculate path length and middle point */
-				int idx = cont_path_cnt - 1;
-				path[idx].len =
-					path[idx].end - path[idx].start + 1;
-				path[idx].mid =
-					path[idx].start + path[idx].len / 2;
-			}
-		}
-	}
+static int sd_get_phase_len(u32 phase_map, unsigned int start_bit)
+{
+	int i;
 
-	if (cont_path_cnt == 0) {
-		dev_dbg(sdmmc_dev(host), "No continuous phase path\n");
-		goto finish;
-	} else {
-		/* Calculate last continuous path length and middle point */
-		int idx = cont_path_cnt - 1;
-		path[idx].len = path[idx].end - path[idx].start + 1;
-		path[idx].mid = path[idx].start + path[idx].len / 2;
+	for (i = 0; i < RTSX_PHASE_MAX; i++) {
+		if (test_phase_bit(phase_map, start_bit + i) == 0)
+			return i;
 	}
+	return RTSX_PHASE_MAX;
+}
+
+static u8 sd_search_final_phase(struct realtek_pci_sdmmc *host, u32 phase_map)
+{
+	int start = 0, len = 0;
+	int start_final = 0, len_final = 0;
+	u8 final_phase = 0xFF;
 
-	/* Connect the first and last continuous paths if they are adjacent */
-	if (!path[0].start && (path[cont_path_cnt - 1].end == MAX_PHASE)) {
-		/* Using negative index */
-		path[0].start = path[cont_path_cnt - 1].start - MAX_PHASE - 1;
-		path[0].len += path[cont_path_cnt - 1].len;
-		path[0].mid = path[0].start + path[0].len / 2;
-		/* Convert negative middle point index to positive one */
-		if (path[0].mid < 0)
-			path[0].mid += MAX_PHASE + 1;
-		cont_path_cnt--;
+	if (phase_map == 0) {
+		dev_err(sdmmc_dev(host), "phase error: [map:%x]\n", phase_map);
+		return final_phase;
 	}
 
-	/* Choose the longest continuous phase path */
-	max_len = 0;
-	final_phase = 0;
-	final_path_idx = 0;
-	for (i = 0; i < cont_path_cnt; i++) {
-		if (path[i].len > max_len) {
-			max_len = path[i].len;
-			final_phase = (u8)path[i].mid;
-			final_path_idx = i;
+	while (start < RTSX_PHASE_MAX) {
+		len = sd_get_phase_len(phase_map, start);
+		if (len_final < len) {
+			start_final = start;
+			len_final = len;
 		}
-
-		dev_dbg(sdmmc_dev(host), "path[%d].start = %d\n",
-				i, path[i].start);
-		dev_dbg(sdmmc_dev(host), "path[%d].end = %d\n",
-				i, path[i].end);
-		dev_dbg(sdmmc_dev(host), "path[%d].len = %d\n",
-				i, path[i].len);
-		dev_dbg(sdmmc_dev(host), "path[%d].mid = %d\n",
-				i, path[i].mid);
+		start += len ? len : 1;
 	}
 
-finish:
-	dev_dbg(sdmmc_dev(host), "Final chosen phase: %d\n", final_phase);
+	final_phase = (start_final + len_final / 2) % RTSX_PHASE_MAX;
+	dev_dbg(sdmmc_dev(host), "phase: [map:%x] [maxlen:%d] [final:%d]\n",
+		phase_map, len_final, final_phase);
+
 	return final_phase;
 }
 
@@ -635,7 +851,7 @@ static int sd_tuning_phase(struct realtek_pci_sdmmc *host,
 	int err, i;
 	u32 raw_phase_map = 0;
 
-	for (i = MAX_PHASE; i >= 0; i--) {
+	for (i = 0; i < RTSX_PHASE_MAX; i++) {
 		err = sd_tuning_rx_cmd(host, opcode, (u8)i);
 		if (err == 0)
 			raw_phase_map |= 1 << i;
@@ -685,6 +901,13 @@ static int sd_tuning_rx(struct realtek_pci_sdmmc *host, u8 opcode)
 	return 0;
 }
 
+static inline bool sd_use_muti_rw(struct mmc_command *cmd)
+{
+	return mmc_op_multi(cmd->opcode) ||
+		(cmd->opcode == MMC_READ_SINGLE_BLOCK) ||
+		(cmd->opcode == MMC_WRITE_BLOCK);
+}
+
 static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 {
 	struct realtek_pci_sdmmc *host = mmc_priv(mmc);
@@ -693,6 +916,14 @@ static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	struct mmc_data *data = mrq->data;
 	unsigned int data_size = 0;
 	int err;
+	unsigned long flags;
+
+	mutex_lock(&pcr->pcr_mutex);
+	spin_lock_irqsave(&host->lock, flags);
+
+	if (host->mrq)
+		dev_err(sdmmc_dev(host), "error: request already exist\n");
+	host->mrq = mrq;
 
 	if (host->eject) {
 		cmd->error = -ENOMEDIUM;
@@ -705,8 +936,6 @@ static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 		goto finish;
 	}
 
-	mutex_lock(&pcr->pcr_mutex);
-
 	rtsx_pci_start_run(pcr);
 
 	rtsx_pci_switch_clock(pcr, host->clock, host->ssc_depth,
@@ -715,46 +944,28 @@ static void sdmmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
 	rtsx_pci_write_register(pcr, CARD_SHARE_MODE,
 			CARD_SHARE_MASK, CARD_SHARE_48_SD);
 
-	mutex_lock(&host->host_mutex);
-	host->mrq = mrq;
-	mutex_unlock(&host->host_mutex);
-
 	if (mrq->data)
 		data_size = data->blocks * data->blksz;
 
-	if (!data_size || mmc_op_multi(cmd->opcode) ||
-			(cmd->opcode == MMC_READ_SINGLE_BLOCK) ||
-			(cmd->opcode == MMC_WRITE_BLOCK)) {
-		sd_send_cmd_get_rsp(host, cmd);
-
-		if (!cmd->error && data_size) {
-			sd_rw_multi(host, mrq);
+	if (sd_use_muti_rw(cmd))
+		host->sg_count = sd_pre_dma_transfer(host, data, NULL);
 
-			if (mmc_op_multi(cmd->opcode) && mrq->stop)
-				sd_send_cmd_get_rsp(host, mrq->stop);
-		}
+	if (!data_size || sd_use_muti_rw(cmd)) {
+		if (mrq->sbc)
+			sd_send_cmd(host, mrq->sbc);
+		else
+			sd_send_cmd(host, cmd);
+		spin_unlock_irqrestore(&host->lock, flags);
 	} else {
+		spin_unlock_irqrestore(&host->lock, flags);
 		sd_normal_rw(host, mrq);
+		tasklet_schedule(&host->finish_tasklet);
 	}
-
-	if (mrq->data) {
-		if (cmd->error || data->error)
-			data->bytes_xfered = 0;
-		else
-			data->bytes_xfered = data->blocks * data->blksz;
-	}
-
-	mutex_unlock(&pcr->pcr_mutex);
+	return;
 
 finish:
-	if (cmd->error)
-		dev_dbg(sdmmc_dev(host), "cmd->error = %d\n", cmd->error);
-
-	mutex_lock(&host->host_mutex);
-	host->mrq = NULL;
-	mutex_unlock(&host->host_mutex);
-
-	mmc_request_done(mmc, mrq);
+	tasklet_schedule(&host->finish_tasklet);
+	spin_unlock_irqrestore(&host->lock, flags);
 }
 
 static int sd_set_bus_width(struct realtek_pci_sdmmc *host,
@@ -1189,6 +1400,8 @@ out:
 }
 
 static const struct mmc_host_ops realtek_pci_sdmmc_ops = {
+	.pre_req = sdmmc_pre_req,
+	.post_req = sdmmc_post_req,
 	.request = sdmmc_request,
 	.set_ios = sdmmc_set_ios,
 	.get_ro = sdmmc_get_ro,
@@ -1252,6 +1465,7 @@ static int rtsx_pci_sdmmc_drv_probe(struct platform_device *pdev)
 	struct realtek_pci_sdmmc *host;
 	struct rtsx_pcr *pcr;
 	struct pcr_handle *handle = pdev->dev.platform_data;
+	unsigned long host_addr;
 
 	if (!handle)
 		return -ENXIO;
@@ -1275,8 +1489,15 @@ static int rtsx_pci_sdmmc_drv_probe(struct platform_device *pdev)
 	pcr->slots[RTSX_SD_CARD].p_dev = pdev;
 	pcr->slots[RTSX_SD_CARD].card_event = rtsx_pci_sdmmc_card_event;
 
-	mutex_init(&host->host_mutex);
+	host_addr = (unsigned long)host;
+	host->next_data.cookie = 1;
+	setup_timer(&host->timer, sd_request_timeout, host_addr);
+	tasklet_init(&host->cmd_tasklet, sd_get_rsp, host_addr);
+	tasklet_init(&host->data_tasklet, sd_finish_multi_rw, host_addr);
+	tasklet_init(&host->finish_tasklet, sd_finish_request, host_addr);
+	spin_lock_init(&host->lock);
 
+	pcr->slots[RTSX_SD_CARD].done_transfer = sd_isr_done_transfer;
 	realtek_init_host(host);
 
 	mmc_add_host(mmc);
@@ -1289,6 +1510,8 @@ static int rtsx_pci_sdmmc_drv_remove(struct platform_device *pdev)
 	struct realtek_pci_sdmmc *host = platform_get_drvdata(pdev);
 	struct rtsx_pcr *pcr;
 	struct mmc_host *mmc;
+	struct mmc_request *mrq;
+	unsigned long flags;
 
 	if (!host)
 		return 0;
@@ -1296,25 +1519,37 @@ static int rtsx_pci_sdmmc_drv_remove(struct platform_device *pdev)
 	pcr = host->pcr;
 	pcr->slots[RTSX_SD_CARD].p_dev = NULL;
 	pcr->slots[RTSX_SD_CARD].card_event = NULL;
+	pcr->slots[RTSX_SD_CARD].done_transfer = NULL;
 	mmc = host->mmc;
-	host->eject = true;
+	mrq = host->mrq;
 
-	mutex_lock(&host->host_mutex);
+	spin_lock_irqsave(&host->lock, flags);
 	if (host->mrq) {
 		dev_dbg(&(pdev->dev),
 			"%s: Controller removed during transfer\n",
 			mmc_hostname(mmc));
 
-		rtsx_pci_complete_unfinished_transfer(pcr);
+		if (mrq->sbc)
+			mrq->sbc->error = -ENOMEDIUM;
+		if (mrq->cmd)
+			mrq->cmd->error = -ENOMEDIUM;
+		if (mrq->stop)
+			mrq->stop->error = -ENOMEDIUM;
+		if (mrq->data)
+			mrq->data->error = -ENOMEDIUM;
 
-		host->mrq->cmd->error = -ENOMEDIUM;
-		if (host->mrq->stop)
-			host->mrq->stop->error = -ENOMEDIUM;
-		mmc_request_done(mmc, host->mrq);
+		tasklet_schedule(&host->finish_tasklet);
 	}
-	mutex_unlock(&host->host_mutex);
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	del_timer_sync(&host->timer);
+	tasklet_kill(&host->cmd_tasklet);
+	tasklet_kill(&host->data_tasklet);
+	tasklet_kill(&host->finish_tasklet);
 
 	mmc_remove_host(mmc);
+	host->eject = true;
+
 	mmc_free_host(mmc);
 
 	dev_dbg(&(pdev->dev),
diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
index 9ce17f6e4014..ebb3f392b589 100644
--- a/drivers/mmc/host/sdhci-acpi.c
+++ b/drivers/mmc/host/sdhci-acpi.c
@@ -31,7 +31,6 @@
 #include <linux/bitops.h>
 #include <linux/types.h>
 #include <linux/err.h>
-#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/acpi.h>
 #include <linux/pm.h>
@@ -40,13 +39,15 @@
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/pm.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/mmc/sdhci.h>
 
 #include "sdhci.h"
 
 enum {
-	SDHCI_ACPI_SD_CD	= BIT(0),
-	SDHCI_ACPI_RUNTIME_PM	= BIT(1),
+	SDHCI_ACPI_SD_CD		= BIT(0),
+	SDHCI_ACPI_RUNTIME_PM		= BIT(1),
+	SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL	= BIT(2),
 };
 
 struct sdhci_acpi_chip {
@@ -121,6 +122,7 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
 };
 
 static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
+	.quirks  = SDHCI_QUIRK_BROKEN_CARD_DETECTION,
 	.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
 	.caps    = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD,
 	.flags   = SDHCI_ACPI_RUNTIME_PM,
@@ -128,7 +130,8 @@ static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
 };
 
 static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
-	.flags   = SDHCI_ACPI_SD_CD | SDHCI_ACPI_RUNTIME_PM,
+	.flags   = SDHCI_ACPI_SD_CD | SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL |
+		   SDHCI_ACPI_RUNTIME_PM,
 	.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON,
 };
 
@@ -141,6 +144,7 @@ struct sdhci_acpi_uid_slot {
 static const struct sdhci_acpi_uid_slot sdhci_acpi_uids[] = {
 	{ "80860F14" , "1" , &sdhci_acpi_slot_int_emmc },
 	{ "80860F14" , "3" , &sdhci_acpi_slot_int_sd   },
+	{ "80860F16" , NULL, &sdhci_acpi_slot_int_sd   },
 	{ "INT33BB"  , "2" , &sdhci_acpi_slot_int_sdio },
 	{ "INT33C6"  , NULL, &sdhci_acpi_slot_int_sdio },
 	{ "INT3436"  , NULL, &sdhci_acpi_slot_int_sdio },
@@ -150,6 +154,7 @@ static const struct sdhci_acpi_uid_slot sdhci_acpi_uids[] = {
 
 static const struct acpi_device_id sdhci_acpi_ids[] = {
 	{ "80860F14" },
+	{ "80860F16" },
 	{ "INT33BB"  },
 	{ "INT33C6"  },
 	{ "INT3436"  },
@@ -192,59 +197,6 @@ static const struct sdhci_acpi_slot *sdhci_acpi_get_slot(acpi_handle handle,
 	return slot;
 }
 
-#ifdef CONFIG_PM_RUNTIME
-
-static irqreturn_t sdhci_acpi_sd_cd(int irq, void *dev_id)
-{
-	mmc_detect_change(dev_id, msecs_to_jiffies(200));
-	return IRQ_HANDLED;
-}
-
-static int sdhci_acpi_add_own_cd(struct device *dev, struct mmc_host *mmc)
-{
-	struct gpio_desc *desc;
-	unsigned long flags;
-	int err, irq;
-
-	desc = devm_gpiod_get_index(dev, "sd_cd", 0);
-	if (IS_ERR(desc)) {
-		err = PTR_ERR(desc);
-		goto out;
-	}
-
-	err = gpiod_direction_input(desc);
-	if (err)
-		goto out_free;
-
-	irq = gpiod_to_irq(desc);
-	if (irq < 0) {
-		err = irq;
-		goto out_free;
-	}
-
-	flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
-	err = devm_request_irq(dev, irq, sdhci_acpi_sd_cd, flags, "sd_cd", mmc);
-	if (err)
-		goto out_free;
-
-	return 0;
-
-out_free:
-	devm_gpiod_put(dev, desc);
-out:
-	dev_warn(dev, "failed to setup card detect wake up\n");
-	return err;
-}
-
-#else
-
-static int sdhci_acpi_add_own_cd(struct device *dev, struct mmc_host *mmc)
-{
-	return 0;
-}
-
-#endif
-
 static int sdhci_acpi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -332,15 +284,19 @@ static int sdhci_acpi_probe(struct platform_device *pdev)
 
 	host->mmc->caps2 |= MMC_CAP2_NO_PRESCAN_POWERUP;
 
-	err = sdhci_add_host(host);
-	if (err)
-		goto err_free;
-
 	if (sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD)) {
-		if (sdhci_acpi_add_own_cd(dev, host->mmc))
+		bool v = sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL);
+
+		if (mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0)) {
+			dev_warn(dev, "failed to setup card detect gpio\n");
 			c->use_runtime_pm = false;
+		}
 	}
 
+	err = sdhci_add_host(host);
+	if (err)
+		goto err_free;
+
 	if (c->use_runtime_pm) {
 		pm_runtime_set_active(dev);
 		pm_suspend_ignore_children(dev, 1);
diff --git a/drivers/mmc/host/sdhci-bcm-kona.c b/drivers/mmc/host/sdhci-bcm-kona.c
index 7a190fe4dff1..6f166e63b817 100644
--- a/drivers/mmc/host/sdhci-bcm-kona.c
+++ b/drivers/mmc/host/sdhci-bcm-kona.c
@@ -54,6 +54,7 @@
 
 struct sdhci_bcm_kona_dev {
 	struct mutex	write_lock; /* protect back to back writes */
+	struct clk	*external_clk;
 };
 
 
@@ -257,6 +258,24 @@ static int sdhci_bcm_kona_probe(struct platform_device *pdev)
 		goto err_pltfm_free;
 	}
 
+	/* Get and enable the external clock */
+	kona_dev->external_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(kona_dev->external_clk)) {
+		dev_err(dev, "Failed to get external clock\n");
+		ret = PTR_ERR(kona_dev->external_clk);
+		goto err_pltfm_free;
+	}
+
+	if (clk_set_rate(kona_dev->external_clk, host->mmc->f_max) != 0) {
+		dev_err(dev, "Failed to set rate external clock\n");
+		goto err_pltfm_free;
+	}
+
+	if (clk_prepare_enable(kona_dev->external_clk) != 0) {
+		dev_err(dev, "Failed to enable external clock\n");
+		goto err_pltfm_free;
+	}
+
 	dev_dbg(dev, "non-removable=%c\n",
 		(host->mmc->caps & MMC_CAP_NONREMOVABLE) ? 'Y' : 'N');
 	dev_dbg(dev, "cd_gpio %c, wp_gpio %c\n",
@@ -271,7 +290,7 @@ static int sdhci_bcm_kona_probe(struct platform_device *pdev)
 
 	ret = sdhci_bcm_kona_sd_reset(host);
 	if (ret)
-		goto err_pltfm_free;
+		goto err_clk_disable;
 
 	sdhci_bcm_kona_sd_init(host);
 
@@ -307,6 +326,9 @@ err_remove_host:
 err_reset:
 	sdhci_bcm_kona_sd_reset(host);
 
+err_clk_disable:
+	clk_disable_unprepare(kona_dev->external_clk);
+
 err_pltfm_free:
 	sdhci_pltfm_free(pdev);
 
@@ -314,9 +336,20 @@ err_pltfm_free:
 	return ret;
 }
 
-static int __exit sdhci_bcm_kona_remove(struct platform_device *pdev)
+static int sdhci_bcm_kona_remove(struct platform_device *pdev)
 {
-	return sdhci_pltfm_unregister(pdev);
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host);
+	struct sdhci_bcm_kona_dev *kona_dev = sdhci_pltfm_priv(pltfm_priv);
+	int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff);
+
+	sdhci_remove_host(host, dead);
+
+	clk_disable_unprepare(kona_dev->external_clk);
+
+	sdhci_pltfm_free(pdev);
+
+	return 0;
 }
 
 static struct platform_driver sdhci_bcm_kona_driver = {
diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c
index 8424839660f8..736d7a2eb7ec 100644
--- a/drivers/mmc/host/sdhci-dove.c
+++ b/drivers/mmc/host/sdhci-dove.c
@@ -208,7 +208,7 @@ static struct platform_driver sdhci_dove_driver = {
 		.name	= "sdhci-dove",
 		.owner	= THIS_MODULE,
 		.pm	= SDHCI_PLTFM_PMOPS,
-		.of_match_table = of_match_ptr(sdhci_dove_of_match_table),
+		.of_match_table = sdhci_dove_of_match_table,
 	},
 	.probe		= sdhci_dove_probe,
 	.remove		= sdhci_dove_remove,
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
new file mode 100644
index 000000000000..acb0e9eb55f1
--- /dev/null
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -0,0 +1,618 @@
+/*
+ * drivers/mmc/host/sdhci-msm.c - Qualcomm SDHCI Platform driver
+ *
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/delay.h>
+#include <linux/mmc/mmc.h>
+#include <linux/slab.h>
+
+#include "sdhci-pltfm.h"
+
+#define CORE_HC_MODE		0x78
+#define HC_MODE_EN		0x1
+#define CORE_POWER		0x0
+#define CORE_SW_RST		BIT(7)
+
+#define MAX_PHASES		16
+#define CORE_DLL_LOCK		BIT(7)
+#define CORE_DLL_EN		BIT(16)
+#define CORE_CDR_EN		BIT(17)
+#define CORE_CK_OUT_EN		BIT(18)
+#define CORE_CDR_EXT_EN		BIT(19)
+#define CORE_DLL_PDN		BIT(29)
+#define CORE_DLL_RST		BIT(30)
+#define CORE_DLL_CONFIG		0x100
+#define CORE_DLL_STATUS		0x108
+
+#define CORE_VENDOR_SPEC	0x10c
+#define CORE_CLK_PWRSAVE	BIT(1)
+
+#define CDR_SELEXT_SHIFT	20
+#define CDR_SELEXT_MASK		(0xf << CDR_SELEXT_SHIFT)
+#define CMUX_SHIFT_PHASE_SHIFT	24
+#define CMUX_SHIFT_PHASE_MASK	(7 << CMUX_SHIFT_PHASE_SHIFT)
+
+static const u32 tuning_block_64[] = {
+	0x00ff0fff, 0xccc3ccff, 0xffcc3cc3, 0xeffefffe,
+	0xddffdfff, 0xfbfffbff, 0xff7fffbf, 0xefbdf777,
+	0xf0fff0ff, 0x3cccfc0f, 0xcfcc33cc, 0xeeffefff,
+	0xfdfffdff, 0xffbfffdf, 0xfff7ffbb, 0xde7b7ff7
+};
+
+static const u32 tuning_block_128[] = {
+	0xff00ffff, 0x0000ffff, 0xccccffff, 0xcccc33cc,
+	0xcc3333cc, 0xffffcccc, 0xffffeeff, 0xffeeeeff,
+	0xffddffff, 0xddddffff, 0xbbffffff, 0xbbffffff,
+	0xffffffbb, 0xffffff77, 0x77ff7777, 0xffeeddbb,
+	0x00ffffff, 0x00ffffff, 0xccffff00, 0xcc33cccc,
+	0x3333cccc, 0xffcccccc, 0xffeeffff, 0xeeeeffff,
+	0xddffffff, 0xddffffff, 0xffffffdd, 0xffffffbb,
+	0xffffbbbb, 0xffff77ff, 0xff7777ff, 0xeeddbb77
+};
+
+struct sdhci_msm_host {
+	struct platform_device *pdev;
+	void __iomem *core_mem;	/* MSM SDCC mapped address */
+	struct clk *clk;	/* main SD/MMC bus clock */
+	struct clk *pclk;	/* SDHC peripheral bus clock */
+	struct clk *bus_clk;	/* SDHC bus voter clock */
+	struct mmc_host *mmc;
+	struct sdhci_pltfm_data sdhci_msm_pdata;
+};
+
+/* Platform specific tuning */
+static inline int msm_dll_poll_ck_out_en(struct sdhci_host *host, u8 poll)
+{
+	u32 wait_cnt = 50;
+	u8 ck_out_en;
+	struct mmc_host *mmc = host->mmc;
+
+	/* Poll for CK_OUT_EN bit.  max. poll time = 50us */
+	ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) &
+			CORE_CK_OUT_EN);
+
+	while (ck_out_en != poll) {
+		if (--wait_cnt == 0) {
+			dev_err(mmc_dev(mmc), "%s: CK_OUT_EN bit is not %d\n",
+			       mmc_hostname(mmc), poll);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+
+		ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) &
+				CORE_CK_OUT_EN);
+	}
+
+	return 0;
+}
+
+static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase)
+{
+	int rc;
+	static const u8 grey_coded_phase_table[] = {
+		0x0, 0x1, 0x3, 0x2, 0x6, 0x7, 0x5, 0x4,
+		0xc, 0xd, 0xf, 0xe, 0xa, 0xb, 0x9, 0x8
+	};
+	unsigned long flags;
+	u32 config;
+	struct mmc_host *mmc = host->mmc;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config &= ~(CORE_CDR_EN | CORE_CK_OUT_EN);
+	config |= (CORE_CDR_EXT_EN | CORE_DLL_EN);
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '0' */
+	rc = msm_dll_poll_ck_out_en(host, 0);
+	if (rc)
+		goto err_out;
+
+	/*
+	 * Write the selected DLL clock output phase (0 ... 15)
+	 * to CDR_SELEXT bit field of DLL_CONFIG register.
+	 */
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config &= ~CDR_SELEXT_MASK;
+	config |= grey_coded_phase_table[phase] << CDR_SELEXT_SHIFT;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Set CK_OUT_EN bit of DLL_CONFIG register to 1. */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			| CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '1' */
+	rc = msm_dll_poll_ck_out_en(host, 1);
+	if (rc)
+		goto err_out;
+
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config |= CORE_CDR_EN;
+	config &= ~CORE_CDR_EXT_EN;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+	goto out;
+
+err_out:
+	dev_err(mmc_dev(mmc), "%s: Failed to set DLL phase: %d\n",
+	       mmc_hostname(mmc), phase);
+out:
+	spin_unlock_irqrestore(&host->lock, flags);
+	return rc;
+}
+
+/*
+ * Find out the greatest range of consecuitive selected
+ * DLL clock output phases that can be used as sampling
+ * setting for SD3.0 UHS-I card read operation (in SDR104
+ * timing mode) or for eMMC4.5 card read operation (in HS200
+ * timing mode).
+ * Select the 3/4 of the range and configure the DLL with the
+ * selected DLL clock output phase.
+ */
+
+static int msm_find_most_appropriate_phase(struct sdhci_host *host,
+					   u8 *phase_table, u8 total_phases)
+{
+	int ret;
+	u8 ranges[MAX_PHASES][MAX_PHASES] = { {0}, {0} };
+	u8 phases_per_row[MAX_PHASES] = { 0 };
+	int row_index = 0, col_index = 0, selected_row_index = 0, curr_max = 0;
+	int i, cnt, phase_0_raw_index = 0, phase_15_raw_index = 0;
+	bool phase_0_found = false, phase_15_found = false;
+	struct mmc_host *mmc = host->mmc;
+
+	if (!total_phases || (total_phases > MAX_PHASES)) {
+		dev_err(mmc_dev(mmc), "%s: Invalid argument: total_phases=%d\n",
+		       mmc_hostname(mmc), total_phases);
+		return -EINVAL;
+	}
+
+	for (cnt = 0; cnt < total_phases; cnt++) {
+		ranges[row_index][col_index] = phase_table[cnt];
+		phases_per_row[row_index] += 1;
+		col_index++;
+
+		if ((cnt + 1) == total_phases) {
+			continue;
+		/* check if next phase in phase_table is consecutive or not */
+		} else if ((phase_table[cnt] + 1) != phase_table[cnt + 1]) {
+			row_index++;
+			col_index = 0;
+		}
+	}
+
+	if (row_index >= MAX_PHASES)
+		return -EINVAL;
+
+	/* Check if phase-0 is present in first valid window? */
+	if (!ranges[0][0]) {
+		phase_0_found = true;
+		phase_0_raw_index = 0;
+		/* Check if cycle exist between 2 valid windows */
+		for (cnt = 1; cnt <= row_index; cnt++) {
+			if (phases_per_row[cnt]) {
+				for (i = 0; i < phases_per_row[cnt]; i++) {
+					if (ranges[cnt][i] == 15) {
+						phase_15_found = true;
+						phase_15_raw_index = cnt;
+						break;
+					}
+				}
+			}
+		}
+	}
+
+	/* If 2 valid windows form cycle then merge them as single window */
+	if (phase_0_found && phase_15_found) {
+		/* number of phases in raw where phase 0 is present */
+		u8 phases_0 = phases_per_row[phase_0_raw_index];
+		/* number of phases in raw where phase 15 is present */
+		u8 phases_15 = phases_per_row[phase_15_raw_index];
+
+		if (phases_0 + phases_15 >= MAX_PHASES)
+			/*
+			 * If there are more than 1 phase windows then total
+			 * number of phases in both the windows should not be
+			 * more than or equal to MAX_PHASES.
+			 */
+			return -EINVAL;
+
+		/* Merge 2 cyclic windows */
+		i = phases_15;
+		for (cnt = 0; cnt < phases_0; cnt++) {
+			ranges[phase_15_raw_index][i] =
+			    ranges[phase_0_raw_index][cnt];
+			if (++i >= MAX_PHASES)
+				break;
+		}
+
+		phases_per_row[phase_0_raw_index] = 0;
+		phases_per_row[phase_15_raw_index] = phases_15 + phases_0;
+	}
+
+	for (cnt = 0; cnt <= row_index; cnt++) {
+		if (phases_per_row[cnt] > curr_max) {
+			curr_max = phases_per_row[cnt];
+			selected_row_index = cnt;
+		}
+	}
+
+	i = (curr_max * 3) / 4;
+	if (i)
+		i--;
+
+	ret = ranges[selected_row_index][i];
+
+	if (ret >= MAX_PHASES) {
+		ret = -EINVAL;
+		dev_err(mmc_dev(mmc), "%s: Invalid phase selected=%d\n",
+		       mmc_hostname(mmc), ret);
+	}
+
+	return ret;
+}
+
+static inline void msm_cm_dll_set_freq(struct sdhci_host *host)
+{
+	u32 mclk_freq = 0, config;
+
+	/* Program the MCLK value to MCLK_FREQ bit field */
+	if (host->clock <= 112000000)
+		mclk_freq = 0;
+	else if (host->clock <= 125000000)
+		mclk_freq = 1;
+	else if (host->clock <= 137000000)
+		mclk_freq = 2;
+	else if (host->clock <= 150000000)
+		mclk_freq = 3;
+	else if (host->clock <= 162000000)
+		mclk_freq = 4;
+	else if (host->clock <= 175000000)
+		mclk_freq = 5;
+	else if (host->clock <= 187000000)
+		mclk_freq = 6;
+	else if (host->clock <= 200000000)
+		mclk_freq = 7;
+
+	config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG);
+	config &= ~CMUX_SHIFT_PHASE_MASK;
+	config |= mclk_freq << CMUX_SHIFT_PHASE_SHIFT;
+	writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG);
+}
+
+/* Initialize the DLL (Programmable Delay Line) */
+static int msm_init_cm_dll(struct sdhci_host *host)
+{
+	struct mmc_host *mmc = host->mmc;
+	int wait_cnt = 50;
+	unsigned long flags;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	/*
+	 * Make sure that clock is always enabled when DLL
+	 * tuning is in progress. Keeping PWRSAVE ON may
+	 * turn off the clock.
+	 */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC)
+			& ~CORE_CLK_PWRSAVE), host->ioaddr + CORE_VENDOR_SPEC);
+
+	/* Write 1 to DLL_RST bit of DLL_CONFIG register */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			| CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Write 1 to DLL_PDN bit of DLL_CONFIG register */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			| CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+	msm_cm_dll_set_freq(host);
+
+	/* Write 0 to DLL_RST bit of DLL_CONFIG register */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			& ~CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Write 0 to DLL_PDN bit of DLL_CONFIG register */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			& ~CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Set DLL_EN bit to 1. */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			| CORE_DLL_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Set CK_OUT_EN bit to 1. */
+	writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG)
+			| CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG);
+
+	/* Wait until DLL_LOCK bit of DLL_STATUS register becomes '1' */
+	while (!(readl_relaxed(host->ioaddr + CORE_DLL_STATUS) &
+		 CORE_DLL_LOCK)) {
+		/* max. wait for 50us sec for LOCK bit to be set */
+		if (--wait_cnt == 0) {
+			dev_err(mmc_dev(mmc), "%s: DLL failed to LOCK\n",
+			       mmc_hostname(mmc));
+			spin_unlock_irqrestore(&host->lock, flags);
+			return -ETIMEDOUT;
+		}
+		udelay(1);
+	}
+
+	spin_unlock_irqrestore(&host->lock, flags);
+	return 0;
+}
+
+static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
+{
+	int tuning_seq_cnt = 3;
+	u8 phase, *data_buf, tuned_phases[16], tuned_phase_cnt = 0;
+	const u32 *tuning_block_pattern = tuning_block_64;
+	int size = sizeof(tuning_block_64);	/* Pattern size in bytes */
+	int rc;
+	struct mmc_host *mmc = host->mmc;
+	struct mmc_ios ios = host->mmc->ios;
+
+	/*
+	 * Tuning is required for SDR104, HS200 and HS400 cards and
+	 * if clock frequency is greater than 100MHz in these modes.
+	 */
+	if (host->clock <= 100 * 1000 * 1000 ||
+	    !((ios.timing == MMC_TIMING_MMC_HS200) ||
+	      (ios.timing == MMC_TIMING_UHS_SDR104)))
+		return 0;
+
+	if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) &&
+	    (mmc->ios.bus_width == MMC_BUS_WIDTH_8)) {
+		tuning_block_pattern = tuning_block_128;
+		size = sizeof(tuning_block_128);
+	}
+
+	data_buf = kmalloc(size, GFP_KERNEL);
+	if (!data_buf)
+		return -ENOMEM;
+
+retry:
+	/* First of all reset the tuning block */
+	rc = msm_init_cm_dll(host);
+	if (rc)
+		goto out;
+
+	phase = 0;
+	do {
+		struct mmc_command cmd = { 0 };
+		struct mmc_data data = { 0 };
+		struct mmc_request mrq = {
+			.cmd = &cmd,
+			.data = &data
+		};
+		struct scatterlist sg;
+
+		/* Set the phase in delay line hw block */
+		rc = msm_config_cm_dll_phase(host, phase);
+		if (rc)
+			goto out;
+
+		cmd.opcode = opcode;
+		cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+		data.blksz = size;
+		data.blocks = 1;
+		data.flags = MMC_DATA_READ;
+		data.timeout_ns = NSEC_PER_SEC;	/* 1 second */
+
+		data.sg = &sg;
+		data.sg_len = 1;
+		sg_init_one(&sg, data_buf, size);
+		memset(data_buf, 0, size);
+		mmc_wait_for_req(mmc, &mrq);
+
+		if (!cmd.error && !data.error &&
+		    !memcmp(data_buf, tuning_block_pattern, size)) {
+			/* Tuning is successful at this tuning point */
+			tuned_phases[tuned_phase_cnt++] = phase;
+			dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
+				 mmc_hostname(mmc), phase);
+		}
+	} while (++phase < ARRAY_SIZE(tuned_phases));
+
+	if (tuned_phase_cnt) {
+		rc = msm_find_most_appropriate_phase(host, tuned_phases,
+						     tuned_phase_cnt);
+		if (rc < 0)
+			goto out;
+		else
+			phase = rc;
+
+		/*
+		 * Finally set the selected phase in delay
+		 * line hw block.
+		 */
+		rc = msm_config_cm_dll_phase(host, phase);
+		if (rc)
+			goto out;
+		dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
+			 mmc_hostname(mmc), phase);
+	} else {
+		if (--tuning_seq_cnt)
+			goto retry;
+		/* Tuning failed */
+		dev_dbg(mmc_dev(mmc), "%s: No tuning point found\n",
+		       mmc_hostname(mmc));
+		rc = -EIO;
+	}
+
+out:
+	kfree(data_buf);
+	return rc;
+}
+
+static const struct of_device_id sdhci_msm_dt_match[] = {
+	{ .compatible = "qcom,sdhci-msm-v4" },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match);
+
+static struct sdhci_ops sdhci_msm_ops = {
+	.platform_execute_tuning = sdhci_msm_execute_tuning,
+};
+
+static int sdhci_msm_probe(struct platform_device *pdev)
+{
+	struct sdhci_host *host;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_msm_host *msm_host;
+	struct resource *core_memres;
+	int ret;
+	u16 host_version;
+
+	msm_host = devm_kzalloc(&pdev->dev, sizeof(*msm_host), GFP_KERNEL);
+	if (!msm_host)
+		return -ENOMEM;
+
+	msm_host->sdhci_msm_pdata.ops = &sdhci_msm_ops;
+	host = sdhci_pltfm_init(pdev, &msm_host->sdhci_msm_pdata, 0);
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	pltfm_host = sdhci_priv(host);
+	pltfm_host->priv = msm_host;
+	msm_host->mmc = host->mmc;
+	msm_host->pdev = pdev;
+
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		goto pltfm_free;
+
+	sdhci_get_of_property(pdev);
+
+	/* Setup SDCC bus voter clock. */
+	msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus");
+	if (!IS_ERR(msm_host->bus_clk)) {
+		/* Vote for max. clk rate for max. performance */
+		ret = clk_set_rate(msm_host->bus_clk, INT_MAX);
+		if (ret)
+			goto pltfm_free;
+		ret = clk_prepare_enable(msm_host->bus_clk);
+		if (ret)
+			goto pltfm_free;
+	}
+
+	/* Setup main peripheral bus clock */
+	msm_host->pclk = devm_clk_get(&pdev->dev, "iface");
+	if (IS_ERR(msm_host->pclk)) {
+		ret = PTR_ERR(msm_host->pclk);
+		dev_err(&pdev->dev, "Perpheral clk setup failed (%d)\n", ret);
+		goto bus_clk_disable;
+	}
+
+	ret = clk_prepare_enable(msm_host->pclk);
+	if (ret)
+		goto bus_clk_disable;
+
+	/* Setup SDC MMC clock */
+	msm_host->clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(msm_host->clk)) {
+		ret = PTR_ERR(msm_host->clk);
+		dev_err(&pdev->dev, "SDC MMC clk setup failed (%d)\n", ret);
+		goto pclk_disable;
+	}
+
+	ret = clk_prepare_enable(msm_host->clk);
+	if (ret)
+		goto pclk_disable;
+
+	core_memres = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	msm_host->core_mem = devm_ioremap_resource(&pdev->dev, core_memres);
+
+	if (IS_ERR(msm_host->core_mem)) {
+		dev_err(&pdev->dev, "Failed to remap registers\n");
+		ret = PTR_ERR(msm_host->core_mem);
+		goto clk_disable;
+	}
+
+	/* Reset the core and Enable SDHC mode */
+	writel_relaxed(readl_relaxed(msm_host->core_mem + CORE_POWER) |
+		       CORE_SW_RST, msm_host->core_mem + CORE_POWER);
+
+	/* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */
+	usleep_range(1000, 5000);
+	if (readl(msm_host->core_mem + CORE_POWER) & CORE_SW_RST) {
+		dev_err(&pdev->dev, "Stuck in reset\n");
+		ret = -ETIMEDOUT;
+		goto clk_disable;
+	}
+
+	/* Set HC_MODE_EN bit in HC_MODE register */
+	writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE));
+
+	host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+	host->quirks |= SDHCI_QUIRK_SINGLE_POWER_WRITE;
+
+	host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION));
+	dev_dbg(&pdev->dev, "Host Version: 0x%x Vendor Version 0x%x\n",
+		host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >>
+			       SDHCI_VENDOR_VER_SHIFT));
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto clk_disable;
+
+	return 0;
+
+clk_disable:
+	clk_disable_unprepare(msm_host->clk);
+pclk_disable:
+	clk_disable_unprepare(msm_host->pclk);
+bus_clk_disable:
+	if (!IS_ERR(msm_host->bus_clk))
+		clk_disable_unprepare(msm_host->bus_clk);
+pltfm_free:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static int sdhci_msm_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host = platform_get_drvdata(pdev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = pltfm_host->priv;
+	int dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) ==
+		    0xffffffff);
+
+	sdhci_remove_host(host, dead);
+	sdhci_pltfm_free(pdev);
+	clk_disable_unprepare(msm_host->clk);
+	clk_disable_unprepare(msm_host->pclk);
+	if (!IS_ERR(msm_host->bus_clk))
+		clk_disable_unprepare(msm_host->bus_clk);
+	return 0;
+}
+
+static struct platform_driver sdhci_msm_driver = {
+	.probe = sdhci_msm_probe,
+	.remove = sdhci_msm_remove,
+	.driver = {
+		   .name = "sdhci_msm",
+		   .owner = THIS_MODULE,
+		   .of_match_table = sdhci_msm_dt_match,
+	},
+};
+
+module_platform_driver(sdhci_msm_driver);
+
+MODULE_DESCRIPTION("Qualcomm Secure Digital Host Controller Interface driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 0955777b6c7e..fdc612120362 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -610,6 +610,18 @@ static const struct sdhci_pci_fixes sdhci_via = {
 	.probe		= via_probe,
 };
 
+static int rtsx_probe_slot(struct sdhci_pci_slot *slot)
+{
+	slot->host->mmc->caps2 |= MMC_CAP2_HS200;
+	return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_rtsx = {
+	.quirks2	= SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+			SDHCI_QUIRK2_BROKEN_DDR50,
+	.probe_slot	= rtsx_probe_slot,
+};
+
 static const struct pci_device_id pci_ids[] = {
 	{
 		.vendor		= PCI_VENDOR_ID_RICOH,
@@ -732,6 +744,14 @@ static const struct pci_device_id pci_ids[] = {
 	},
 
 	{
+		.vendor		= PCI_VENDOR_ID_REALTEK,
+		.device		= 0x5250,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.driver_data	= (kernel_ulong_t)&sdhci_rtsx,
+	},
+
+	{
 		.vendor		= PCI_VENDOR_ID_INTEL,
 		.device		= PCI_DEVICE_ID_INTEL_MRST_SD0,
 		.subvendor	= PCI_ANY_ID,
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 793dacd3b841..2fd73b38c303 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -34,6 +34,7 @@
 #include <linux/of_gpio.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
+#include <linux/mbus.h>
 
 #include "sdhci.h"
 #include "sdhci-pltfm.h"
@@ -57,6 +58,60 @@
 #define SDCE_MISC_INT		(1<<2)
 #define SDCE_MISC_INT_EN	(1<<1)
 
+/*
+ * These registers are relative to the second register region, for the
+ * MBus bridge.
+ */
+#define SDHCI_WINDOW_CTRL(i)	(0x80 + ((i) << 3))
+#define SDHCI_WINDOW_BASE(i)	(0x84 + ((i) << 3))
+#define SDHCI_MAX_WIN_NUM	8
+
+static int mv_conf_mbus_windows(struct platform_device *pdev,
+				const struct mbus_dram_target_info *dram)
+{
+	int i;
+	void __iomem *regs;
+	struct resource *res;
+
+	if (!dram) {
+		dev_err(&pdev->dev, "no mbus dram info\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot get mbus registers\n");
+		return -EINVAL;
+	}
+
+	regs = ioremap(res->start, resource_size(res));
+	if (!regs) {
+		dev_err(&pdev->dev, "cannot map mbus registers\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < SDHCI_MAX_WIN_NUM; i++) {
+		writel(0, regs + SDHCI_WINDOW_CTRL(i));
+		writel(0, regs + SDHCI_WINDOW_BASE(i));
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+
+		/* Write size, attributes and target id to control register */
+		writel(((cs->size - 1) & 0xffff0000) |
+			(cs->mbus_attr << 8) |
+			(dram->mbus_dram_target_id << 4) | 1,
+			regs + SDHCI_WINDOW_CTRL(i));
+		/* Write base address to base register */
+		writel(cs->base, regs + SDHCI_WINDOW_BASE(i));
+	}
+
+	iounmap(regs);
+
+	return 0;
+}
+
 static void pxav3_set_private_registers(struct sdhci_host *host, u8 mask)
 {
 	struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc));
@@ -187,6 +242,9 @@ static const struct of_device_id sdhci_pxav3_of_match[] = {
 	{
 		.compatible = "mrvl,pxav3-mmc",
 	},
+	{
+		.compatible = "marvell,armada-380-sdhci",
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match);
@@ -219,6 +277,7 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 	struct sdhci_pltfm_host *pltfm_host;
 	struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
 	struct device *dev = &pdev->dev;
+	struct device_node *np = pdev->dev.of_node;
 	struct sdhci_host *host = NULL;
 	struct sdhci_pxa *pxa = NULL;
 	const struct of_device_id *match;
@@ -235,6 +294,14 @@ static int sdhci_pxav3_probe(struct platform_device *pdev)
 		kfree(pxa);
 		return PTR_ERR(host);
 	}
+
+	if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) {
+		ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info());
+		if (ret < 0)
+			goto err_mbus_win;
+	}
+
+
 	pltfm_host = sdhci_priv(host);
 	pltfm_host->priv = pxa;
 
@@ -321,6 +388,7 @@ err_add_host:
 	clk_disable_unprepare(clk);
 	clk_put(clk);
 err_clk_get:
+err_mbus_win:
 	sdhci_pltfm_free(pdev);
 	kfree(pxa);
 	return ret;
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 6debda952155..d61eb5a70833 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -51,12 +51,13 @@ struct sdhci_s3c {
 	struct platform_device	*pdev;
 	struct resource		*ioarea;
 	struct s3c_sdhci_platdata *pdata;
-	unsigned int		cur_clk;
+	int			cur_clk;
 	int			ext_cd_irq;
 	int			ext_cd_gpio;
 
 	struct clk		*clk_io;
 	struct clk		*clk_bus[MAX_BUS_CLK];
+	unsigned long		clk_rates[MAX_BUS_CLK];
 };
 
 /**
@@ -77,32 +78,6 @@ static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
 }
 
 /**
- * get_curclk - convert ctrl2 register to clock source number
- * @ctrl2: Control2 register value.
- */
-static u32 get_curclk(u32 ctrl2)
-{
-	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-	ctrl2 >>= S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
-
-	return ctrl2;
-}
-
-static void sdhci_s3c_check_sclk(struct sdhci_host *host)
-{
-	struct sdhci_s3c *ourhost = to_s3c(host);
-	u32 tmp = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
-
-	if (get_curclk(tmp) != ourhost->cur_clk) {
-		dev_dbg(&ourhost->pdev->dev, "restored ctrl2 clock setting\n");
-
-		tmp &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-		tmp |= ourhost->cur_clk << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
-		writel(tmp, host->ioaddr + S3C_SDHCI_CONTROL2);
-	}
-}
-
-/**
  * sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
  * @host: The SDHCI host instance.
  *
@@ -111,20 +86,11 @@ static void sdhci_s3c_check_sclk(struct sdhci_host *host)
 static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
 {
 	struct sdhci_s3c *ourhost = to_s3c(host);
-	struct clk *busclk;
-	unsigned int rate, max;
-	int clk;
-
-	/* note, a reset will reset the clock source */
-
-	sdhci_s3c_check_sclk(host);
-
-	for (max = 0, clk = 0; clk < MAX_BUS_CLK; clk++) {
-		busclk = ourhost->clk_bus[clk];
-		if (!busclk)
-			continue;
+	unsigned long rate, max = 0;
+	int src;
 
-		rate = clk_get_rate(busclk);
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		rate = ourhost->clk_rates[src];
 		if (rate > max)
 			max = rate;
 	}
@@ -144,9 +110,9 @@ static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
 {
 	unsigned long rate;
 	struct clk *clksrc = ourhost->clk_bus[src];
-	int div;
+	int shift;
 
-	if (!clksrc)
+	if (IS_ERR(clksrc))
 		return UINT_MAX;
 
 	/*
@@ -158,17 +124,24 @@ static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
 		return wanted - rate;
 	}
 
-	rate = clk_get_rate(clksrc);
+	rate = ourhost->clk_rates[src];
 
-	for (div = 1; div < 256; div *= 2) {
-		if ((rate / div) <= wanted)
+	for (shift = 0; shift <= 8; ++shift) {
+		if ((rate >> shift) <= wanted)
 			break;
 	}
 
+	if (shift > 8) {
+		dev_dbg(&ourhost->pdev->dev,
+			"clk %d: rate %ld, min rate %lu > wanted %u\n",
+			src, rate, rate / 256, wanted);
+		return UINT_MAX;
+	}
+
 	dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
-		src, rate, wanted, rate / div);
+		src, rate, wanted, rate >> shift);
 
-	return wanted - (rate / div);
+	return wanted - (rate >> shift);
 }
 
 /**
@@ -209,20 +182,22 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
 		struct clk *clk = ourhost->clk_bus[best_src];
 
 		clk_prepare_enable(clk);
-		clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
-
-		/* turn clock off to card before changing clock source */
-		writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+		if (ourhost->cur_clk >= 0)
+			clk_disable_unprepare(
+					ourhost->clk_bus[ourhost->cur_clk]);
 
 		ourhost->cur_clk = best_src;
-		host->max_clk = clk_get_rate(clk);
-
-		ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
-		ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-		ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
-		writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+		host->max_clk = ourhost->clk_rates[best_src];
 	}
 
+	/* turn clock off to card before changing clock source */
+	writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+
+	ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+	ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+
 	/* reprogram default hardware configuration */
 	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
 		host->ioaddr + S3C64XX_SDHCI_CONTROL4);
@@ -254,17 +229,17 @@ static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
 static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
 {
 	struct sdhci_s3c *ourhost = to_s3c(host);
-	unsigned int delta, min = UINT_MAX;
+	unsigned long rate, min = ULONG_MAX;
 	int src;
 
 	for (src = 0; src < MAX_BUS_CLK; src++) {
-		delta = sdhci_s3c_consider_clock(ourhost, src, 0);
-		if (delta == UINT_MAX)
+		rate = ourhost->clk_rates[src] / 256;
+		if (!rate)
 			continue;
-		/* delta is a negative value in this case */
-		if (-delta < min)
-			min = -delta;
+		if (rate < min)
+			min = rate;
 	}
+
 	return min;
 }
 
@@ -272,20 +247,44 @@ static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
 static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
 {
 	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned long rate, max = 0;
+	int src;
 
-	return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], UINT_MAX);
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		struct clk *clk;
+
+		clk = ourhost->clk_bus[src];
+		if (IS_ERR(clk))
+			continue;
+
+		rate = clk_round_rate(clk, ULONG_MAX);
+		if (rate > max)
+			max = rate;
+	}
+
+	return max;
 }
 
 /* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
 static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
 {
 	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned long rate, min = ULONG_MAX;
+	int src;
 
-	/*
-	 * initial clock can be in the frequency range of
-	 * 100KHz-400KHz, so we set it as max value.
-	 */
-	return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], 400000);
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		struct clk *clk;
+
+		clk = ourhost->clk_bus[src];
+		if (IS_ERR(clk))
+			continue;
+
+		rate = clk_round_rate(clk, 0);
+		if (rate < min)
+			min = rate;
+	}
+
+	return min;
 }
 
 /* sdhci_cmu_set_clock - callback on clock change.*/
@@ -552,6 +551,7 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
 	sc->host = host;
 	sc->pdev = pdev;
 	sc->pdata = pdata;
+	sc->cur_clk = -1;
 
 	platform_set_drvdata(pdev, host);
 
@@ -566,25 +566,18 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
 	clk_prepare_enable(sc->clk_io);
 
 	for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
-		struct clk *clk;
 		char name[14];
 
 		snprintf(name, 14, "mmc_busclk.%d", ptr);
-		clk = devm_clk_get(dev, name);
-		if (IS_ERR(clk))
+		sc->clk_bus[ptr] = devm_clk_get(dev, name);
+		if (IS_ERR(sc->clk_bus[ptr]))
 			continue;
 
 		clks++;
-		sc->clk_bus[ptr] = clk;
-
-		/*
-		 * save current clock index to know which clock bus
-		 * is used later in overriding functions.
-		 */
-		sc->cur_clk = ptr;
+		sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]);
 
 		dev_info(dev, "clock source %d: %s (%ld Hz)\n",
-			 ptr, name, clk_get_rate(clk));
+				ptr, name, sc->clk_rates[ptr]);
 	}
 
 	if (clks == 0) {
@@ -593,10 +586,6 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
 		goto err_no_busclks;
 	}
 
-#ifndef CONFIG_PM_RUNTIME
-	clk_prepare_enable(sc->clk_bus[sc->cur_clk]);
-#endif
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(host->ioaddr)) {
@@ -709,10 +698,6 @@ static int sdhci_s3c_probe(struct platform_device *pdev)
 	return 0;
 
  err_req_regs:
-#ifndef CONFIG_PM_RUNTIME
-	clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
-#endif
-
  err_no_busclks:
 	clk_disable_unprepare(sc->clk_io);
 
@@ -743,9 +728,6 @@ static int sdhci_s3c_remove(struct platform_device *pdev)
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
-#ifndef CONFIG_PM_RUNTIME
-	clk_disable_unprepare(sc->clk_bus[sc->cur_clk]);
-#endif
 	clk_disable_unprepare(sc->clk_io);
 
 	sdhci_free_host(host);
@@ -779,7 +761,8 @@ static int sdhci_s3c_runtime_suspend(struct device *dev)
 
 	ret = sdhci_runtime_suspend_host(host);
 
-	clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
+	if (ourhost->cur_clk >= 0)
+		clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
 	clk_disable_unprepare(busclk);
 	return ret;
 }
@@ -792,7 +775,8 @@ static int sdhci_s3c_runtime_resume(struct device *dev)
 	int ret;
 
 	clk_prepare_enable(busclk);
-	clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
+	if (ourhost->cur_clk >= 0)
+		clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
 	ret = sdhci_runtime_resume_host(host);
 	return ret;
 }
diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c
index 2dba9f8d1760..0316dec3f006 100644
--- a/drivers/mmc/host/sdhci-spear.c
+++ b/drivers/mmc/host/sdhci-spear.c
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sdhci-spear.h>
+#include <linux/mmc/slot-gpio.h>
 #include <linux/io.h>
 #include "sdhci.h"
 
@@ -40,36 +41,6 @@ static const struct sdhci_ops sdhci_pltfm_ops = {
 	/* Nothing to do for now. */
 };
 
-/* gpio card detection interrupt handler */
-static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id)
-{
-	struct platform_device *pdev = dev_id;
-	struct sdhci_host *host = platform_get_drvdata(pdev);
-	struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
-	unsigned long gpio_irq_type;
-	int val;
-
-	val = gpio_get_value(sdhci->data->card_int_gpio);
-
-	/* val == 1 -> card removed, val == 0 -> card inserted */
-	/* if card removed - set irq for low level, else vice versa */
-	gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
-	irq_set_irq_type(irq, gpio_irq_type);
-
-	if (sdhci->data->card_power_gpio >= 0) {
-		if (!sdhci->data->power_always_enb) {
-			/* if card inserted, give power, otherwise remove it */
-			val = sdhci->data->power_active_high ? !val : val ;
-			gpio_set_value(sdhci->data->card_power_gpio, val);
-		}
-	}
-
-	/* inform sdhci driver about card insertion/removal */
-	tasklet_schedule(&host->card_tasklet);
-
-	return IRQ_HANDLED;
-}
-
 #ifdef CONFIG_OF
 static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device *pdev)
 {
@@ -84,14 +55,12 @@ static struct sdhci_plat_data *sdhci_probe_config_dt(struct platform_device *pde
 	/* If pdata is required */
 	if (cd_gpio != -1) {
 		pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
-		if (!pdata) {
+		if (!pdata)
 			dev_err(&pdev->dev, "DT: kzalloc failed\n");
-			return ERR_PTR(-ENOMEM);
-		}
+		else
+			pdata->card_int_gpio = cd_gpio;
 	}
 
-	pdata->card_int_gpio = cd_gpio;
-
 	return pdata;
 }
 #else
@@ -107,41 +76,44 @@ static int sdhci_probe(struct platform_device *pdev)
 	struct sdhci_host *host;
 	struct resource *iomem;
 	struct spear_sdhci *sdhci;
+	struct device *dev;
 	int ret;
 
-	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!iomem) {
-		ret = -ENOMEM;
-		dev_dbg(&pdev->dev, "memory resource not defined\n");
+	dev = pdev->dev.parent ? pdev->dev.parent : &pdev->dev;
+	host = sdhci_alloc_host(dev, sizeof(*sdhci));
+	if (IS_ERR(host)) {
+		ret = PTR_ERR(host);
+		dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
 		goto err;
 	}
 
-	if (!devm_request_mem_region(&pdev->dev, iomem->start,
-				resource_size(iomem), "spear-sdhci")) {
-		ret = -EBUSY;
-		dev_dbg(&pdev->dev, "cannot request region\n");
-		goto err;
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem);
+	if (IS_ERR(host->ioaddr)) {
+		ret = PTR_ERR(host->ioaddr);
+		dev_dbg(&pdev->dev, "unable to map iomem: %d\n", ret);
+		goto err_host;
 	}
 
-	sdhci = devm_kzalloc(&pdev->dev, sizeof(*sdhci), GFP_KERNEL);
-	if (!sdhci) {
-		ret = -ENOMEM;
-		dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
-		goto err;
-	}
+	host->hw_name = "sdhci";
+	host->ops = &sdhci_pltfm_ops;
+	host->irq = platform_get_irq(pdev, 0);
+	host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
+
+	sdhci = sdhci_priv(host);
 
 	/* clk enable */
-	sdhci->clk = clk_get(&pdev->dev, NULL);
+	sdhci->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(sdhci->clk)) {
 		ret = PTR_ERR(sdhci->clk);
 		dev_dbg(&pdev->dev, "Error getting clock\n");
-		goto err;
+		goto err_host;
 	}
 
 	ret = clk_prepare_enable(sdhci->clk);
 	if (ret) {
 		dev_dbg(&pdev->dev, "Error enabling clock\n");
-		goto put_clk;
+		goto err_host;
 	}
 
 	ret = clk_set_rate(sdhci->clk, 50000000);
@@ -153,118 +125,42 @@ static int sdhci_probe(struct platform_device *pdev)
 		sdhci->data = sdhci_probe_config_dt(pdev);
 		if (IS_ERR(sdhci->data)) {
 			dev_err(&pdev->dev, "DT: Failed to get pdata\n");
-			return -ENODEV;
+			goto disable_clk;
 		}
 	} else {
 		sdhci->data = dev_get_platdata(&pdev->dev);
 	}
 
-	pdev->dev.platform_data = sdhci;
-
-	if (pdev->dev.parent)
-		host = sdhci_alloc_host(pdev->dev.parent, 0);
-	else
-		host = sdhci_alloc_host(&pdev->dev, 0);
-
-	if (IS_ERR(host)) {
-		ret = PTR_ERR(host);
-		dev_dbg(&pdev->dev, "error allocating host\n");
-		goto disable_clk;
-	}
-
-	host->hw_name = "sdhci";
-	host->ops = &sdhci_pltfm_ops;
-	host->irq = platform_get_irq(pdev, 0);
-	host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
-
-	host->ioaddr = devm_ioremap(&pdev->dev, iomem->start,
-			resource_size(iomem));
-	if (!host->ioaddr) {
-		ret = -ENOMEM;
-		dev_dbg(&pdev->dev, "failed to remap registers\n");
-		goto free_host;
+	/*
+	 * It is optional to use GPIOs for sdhci card detection. If
+	 * sdhci->data is NULL, then use original sdhci lines otherwise
+	 * GPIO lines. We use the built-in GPIO support for this.
+	 */
+	if (sdhci->data && sdhci->data->card_int_gpio >= 0) {
+		ret = mmc_gpio_request_cd(host->mmc,
+					  sdhci->data->card_int_gpio, 0);
+		if (ret < 0) {
+			dev_dbg(&pdev->dev,
+				"failed to request card-detect gpio%d\n",
+				sdhci->data->card_int_gpio);
+			goto disable_clk;
+		}
 	}
 
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_dbg(&pdev->dev, "error adding host\n");
-		goto free_host;
+		goto disable_clk;
 	}
 
 	platform_set_drvdata(pdev, host);
 
-	/*
-	 * It is optional to use GPIOs for sdhci Power control & sdhci card
-	 * interrupt detection. If sdhci->data is NULL, then use original sdhci
-	 * lines otherwise GPIO lines.
-	 * If GPIO is selected for power control, then power should be disabled
-	 * after card removal and should be enabled when card insertion
-	 * interrupt occurs
-	 */
-	if (!sdhci->data)
-		return 0;
-
-	if (sdhci->data->card_power_gpio >= 0) {
-		int val = 0;
-
-		ret = devm_gpio_request(&pdev->dev,
-				sdhci->data->card_power_gpio, "sdhci");
-		if (ret < 0) {
-			dev_dbg(&pdev->dev, "gpio request fail: %d\n",
-					sdhci->data->card_power_gpio);
-			goto set_drvdata;
-		}
-
-		if (sdhci->data->power_always_enb)
-			val = sdhci->data->power_active_high;
-		else
-			val = !sdhci->data->power_active_high;
-
-		ret = gpio_direction_output(sdhci->data->card_power_gpio, val);
-		if (ret) {
-			dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
-					sdhci->data->card_power_gpio);
-			goto set_drvdata;
-		}
-	}
-
-	if (sdhci->data->card_int_gpio >= 0) {
-		ret = devm_gpio_request(&pdev->dev, sdhci->data->card_int_gpio,
-				"sdhci");
-		if (ret < 0) {
-			dev_dbg(&pdev->dev, "gpio request fail: %d\n",
-					sdhci->data->card_int_gpio);
-			goto set_drvdata;
-		}
-
-		ret = gpio_direction_input(sdhci->data->card_int_gpio);
-		if (ret) {
-			dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
-					sdhci->data->card_int_gpio);
-			goto set_drvdata;
-		}
-		ret = devm_request_irq(&pdev->dev,
-				gpio_to_irq(sdhci->data->card_int_gpio),
-				sdhci_gpio_irq, IRQF_TRIGGER_LOW,
-				mmc_hostname(host->mmc), pdev);
-		if (ret) {
-			dev_dbg(&pdev->dev, "gpio request irq fail: %d\n",
-					sdhci->data->card_int_gpio);
-			goto set_drvdata;
-		}
-
-	}
-
 	return 0;
 
-set_drvdata:
-	sdhci_remove_host(host, 1);
-free_host:
-	sdhci_free_host(host);
 disable_clk:
 	clk_disable_unprepare(sdhci->clk);
-put_clk:
-	clk_put(sdhci->clk);
+err_host:
+	sdhci_free_host(host);
 err:
 	dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret);
 	return ret;
@@ -273,7 +169,7 @@ err:
 static int sdhci_remove(struct platform_device *pdev)
 {
 	struct sdhci_host *host = platform_get_drvdata(pdev);
-	struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
+	struct spear_sdhci *sdhci = sdhci_priv(host);
 	int dead = 0;
 	u32 scratch;
 
@@ -282,9 +178,8 @@ static int sdhci_remove(struct platform_device *pdev)
 		dead = 1;
 
 	sdhci_remove_host(host, dead);
-	sdhci_free_host(host);
 	clk_disable_unprepare(sdhci->clk);
-	clk_put(sdhci->clk);
+	sdhci_free_host(host);
 
 	return 0;
 }
@@ -293,7 +188,7 @@ static int sdhci_remove(struct platform_device *pdev)
 static int sdhci_suspend(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
-	struct spear_sdhci *sdhci = dev_get_platdata(dev);
+	struct spear_sdhci *sdhci = sdhci_priv(host);
 	int ret;
 
 	ret = sdhci_suspend_host(host);
@@ -306,7 +201,7 @@ static int sdhci_suspend(struct device *dev)
 static int sdhci_resume(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
-	struct spear_sdhci *sdhci = dev_get_platdata(dev);
+	struct spear_sdhci *sdhci = sdhci_priv(host);
 	int ret;
 
 	ret = clk_enable(sdhci->clk);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 9ddef4763541..9a79fc4b60ca 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -675,12 +675,12 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
 		return 0xE;
 
 	/* Unspecified timeout, assume max */
-	if (!data && !cmd->cmd_timeout_ms)
+	if (!data && !cmd->busy_timeout)
 		return 0xE;
 
 	/* timeout in us */
 	if (!data)
-		target_timeout = cmd->cmd_timeout_ms * 1000;
+		target_timeout = cmd->busy_timeout * 1000;
 	else {
 		target_timeout = data->timeout_ns / 1000;
 		if (host->clock)
@@ -1019,8 +1019,8 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
 	}
 
 	timeout = jiffies;
-	if (!cmd->data && cmd->cmd_timeout_ms > 9000)
-		timeout += DIV_ROUND_UP(cmd->cmd_timeout_ms, 1000) * HZ + HZ;
+	if (!cmd->data && cmd->busy_timeout > 9000)
+		timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
 	else
 		timeout += 10 * HZ;
 	mod_timer(&host->timer, timeout);
@@ -2026,12 +2026,11 @@ out:
 			host->tuning_count * HZ);
 		/* Tuning mode 1 limits the maximum data length to 4MB */
 		mmc->max_blk_count = (4 * 1024 * 1024) / mmc->max_blk_size;
-	} else {
+	} else if (host->flags & SDHCI_USING_RETUNING_TIMER) {
 		host->flags &= ~SDHCI_NEEDS_RETUNING;
 		/* Reload the new initial value for timer */
-		if (host->tuning_mode == SDHCI_TUNING_MODE_1)
-			mod_timer(&host->tuning_timer, jiffies +
-				host->tuning_count * HZ);
+		mod_timer(&host->tuning_timer, jiffies +
+			  host->tuning_count * HZ);
 	}
 
 	/*
@@ -2434,9 +2433,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
 
 	if (host->runtime_suspended) {
 		spin_unlock(&host->lock);
-		pr_warning("%s: got irq while runtime suspended\n",
-		       mmc_hostname(host->mmc));
-		return IRQ_HANDLED;
+		return IRQ_NONE;
 	}
 
 	intmask = sdhci_readl(host, SDHCI_INT_STATUS);
@@ -2941,7 +2938,7 @@ int sdhci_add_host(struct sdhci_host *host)
 	if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
 		host->timeout_clk = mmc->f_max / 1000;
 
-	mmc->max_discard_to = (1 << 27) / host->timeout_clk;
+	mmc->max_busy_timeout = (1 << 27) / host->timeout_clk;
 
 	mmc->caps |= MMC_CAP_SDIO_IRQ | MMC_CAP_ERASE | MMC_CAP_CMD23;
 
@@ -3020,7 +3017,8 @@ int sdhci_add_host(struct sdhci_host *host)
 	} else if (caps[1] & SDHCI_SUPPORT_SDR50)
 		mmc->caps |= MMC_CAP_UHS_SDR50;
 
-	if (caps[1] & SDHCI_SUPPORT_DDR50)
+	if ((caps[1] & SDHCI_SUPPORT_DDR50) &&
+		!(host->quirks2 & SDHCI_QUIRK2_BROKEN_DDR50))
 		mmc->caps |= MMC_CAP_UHS_DDR50;
 
 	/* Does the host need tuning for SDR50? */
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
index 2d6ce257a273..91058dabd11a 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
@@ -37,6 +37,8 @@
 
 struct sh_mobile_sdhi_of_data {
 	unsigned long tmio_flags;
+	unsigned long capabilities;
+	unsigned long capabilities2;
 };
 
 static const struct sh_mobile_sdhi_of_data sh_mobile_sdhi_of_cfg[] = {
@@ -45,6 +47,31 @@ static const struct sh_mobile_sdhi_of_data sh_mobile_sdhi_of_cfg[] = {
 	},
 };
 
+static const struct sh_mobile_sdhi_of_data of_rcar_gen1_compatible = {
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
+	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+};
+
+static const struct sh_mobile_sdhi_of_data of_rcar_gen2_compatible = {
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
+	.capabilities	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+	.capabilities2	= MMC_CAP2_NO_MULTI_READ,
+};
+
+static const struct of_device_id sh_mobile_sdhi_of_match[] = {
+	{ .compatible = "renesas,sdhi-shmobile" },
+	{ .compatible = "renesas,sdhi-sh7372" },
+	{ .compatible = "renesas,sdhi-sh73a0", .data = &sh_mobile_sdhi_of_cfg[0], },
+	{ .compatible = "renesas,sdhi-r8a73a4", .data = &sh_mobile_sdhi_of_cfg[0], },
+	{ .compatible = "renesas,sdhi-r8a7740", .data = &sh_mobile_sdhi_of_cfg[0], },
+	{ .compatible = "renesas,sdhi-r8a7778", .data = &of_rcar_gen1_compatible, },
+	{ .compatible = "renesas,sdhi-r8a7779", .data = &of_rcar_gen1_compatible, },
+	{ .compatible = "renesas,sdhi-r8a7790", .data = &of_rcar_gen2_compatible, },
+	{ .compatible = "renesas,sdhi-r8a7791", .data = &of_rcar_gen2_compatible, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
+
 struct sh_mobile_sdhi {
 	struct clk *clk;
 	struct tmio_mmc_data mmc_data;
@@ -114,19 +141,6 @@ static const struct sh_mobile_sdhi_ops sdhi_ops = {
 	.cd_wakeup = sh_mobile_sdhi_cd_wakeup,
 };
 
-static const struct of_device_id sh_mobile_sdhi_of_match[] = {
-	{ .compatible = "renesas,sdhi-shmobile" },
-	{ .compatible = "renesas,sdhi-sh7372" },
-	{ .compatible = "renesas,sdhi-sh73a0", .data = &sh_mobile_sdhi_of_cfg[0], },
-	{ .compatible = "renesas,sdhi-r8a73a4", .data = &sh_mobile_sdhi_of_cfg[0], },
-	{ .compatible = "renesas,sdhi-r8a7740", .data = &sh_mobile_sdhi_of_cfg[0], },
-	{ .compatible = "renesas,sdhi-r8a7778", .data = &sh_mobile_sdhi_of_cfg[0], },
-	{ .compatible = "renesas,sdhi-r8a7779", .data = &sh_mobile_sdhi_of_cfg[0], },
-	{ .compatible = "renesas,sdhi-r8a7790", .data = &sh_mobile_sdhi_of_cfg[0], },
-	{},
-};
-MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
-
 static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id =
@@ -212,6 +226,8 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
 	if (of_id && of_id->data) {
 		const struct sh_mobile_sdhi_of_data *of_data = of_id->data;
 		mmc_data->flags |= of_data->tmio_flags;
+		mmc_data->capabilities |= of_data->capabilities;
+		mmc_data->capabilities2 |= of_data->capabilities2;
 	}
 
 	/* SD control register space size is 0x100, 0x200 for bus_shift=1 */
@@ -316,10 +332,10 @@ static int sh_mobile_sdhi_remove(struct platform_device *pdev)
 }
 
 static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
-	.suspend = tmio_mmc_host_suspend,
-	.resume = tmio_mmc_host_resume,
-	.runtime_suspend = tmio_mmc_host_runtime_suspend,
-	.runtime_resume = tmio_mmc_host_runtime_resume,
+	SET_SYSTEM_SLEEP_PM_OPS(tmio_mmc_host_suspend, tmio_mmc_host_resume)
+	SET_RUNTIME_PM_OPS(tmio_mmc_host_runtime_suspend,
+			tmio_mmc_host_runtime_resume,
+			NULL)
 };
 
 static struct platform_driver sh_mobile_sdhi_driver = {
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index 1900abb04236..cfad844730d8 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -23,38 +23,37 @@
 
 #include "tmio_mmc.h"
 
-#ifdef CONFIG_PM
-static int tmio_mmc_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM_SLEEP
+static int tmio_mmc_suspend(struct device *dev)
 {
-	const struct mfd_cell *cell = mfd_get_cell(dev);
+	struct platform_device *pdev = to_platform_device(dev);
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
 	int ret;
 
-	ret = tmio_mmc_host_suspend(&dev->dev);
+	ret = tmio_mmc_host_suspend(dev);
 
 	/* Tell MFD core it can disable us now.*/
 	if (!ret && cell->disable)
-		cell->disable(dev);
+		cell->disable(pdev);
 
 	return ret;
 }
 
-static int tmio_mmc_resume(struct platform_device *dev)
+static int tmio_mmc_resume(struct device *dev)
 {
-	const struct mfd_cell *cell = mfd_get_cell(dev);
+	struct platform_device *pdev = to_platform_device(dev);
+	const struct mfd_cell *cell = mfd_get_cell(pdev);
 	int ret = 0;
 
 	/* Tell the MFD core we are ready to be enabled */
 	if (cell->resume)
-		ret = cell->resume(dev);
+		ret = cell->resume(pdev);
 
 	if (!ret)
-		ret = tmio_mmc_host_resume(&dev->dev);
+		ret = tmio_mmc_host_resume(dev);
 
 	return ret;
 }
-#else
-#define tmio_mmc_suspend NULL
-#define tmio_mmc_resume NULL
 #endif
 
 static int tmio_mmc_probe(struct platform_device *pdev)
@@ -134,15 +133,18 @@ static int tmio_mmc_remove(struct platform_device *pdev)
 
 /* ------------------- device registration ----------------------- */
 
+static const struct dev_pm_ops tmio_mmc_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(tmio_mmc_suspend, tmio_mmc_resume)
+};
+
 static struct platform_driver tmio_mmc_driver = {
 	.driver = {
 		.name = "tmio-mmc",
 		.owner = THIS_MODULE,
+		.pm = &tmio_mmc_dev_pm_ops,
 	},
 	.probe = tmio_mmc_probe,
 	.remove = tmio_mmc_remove,
-	.suspend = tmio_mmc_suspend,
-	.resume = tmio_mmc_resume,
 };
 
 module_platform_driver(tmio_mmc_driver);
diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h
index aaa9c7e9e730..100ffe0b2faf 100644
--- a/drivers/mmc/host/tmio_mmc.h
+++ b/drivers/mmc/host/tmio_mmc.h
@@ -162,16 +162,15 @@ static inline void tmio_mmc_abort_dma(struct tmio_mmc_host *host)
 }
 #endif
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 int tmio_mmc_host_suspend(struct device *dev);
 int tmio_mmc_host_resume(struct device *dev);
-#else
-#define tmio_mmc_host_suspend NULL
-#define tmio_mmc_host_resume NULL
 #endif
 
+#ifdef CONFIG_PM_RUNTIME
 int tmio_mmc_host_runtime_suspend(struct device *dev);
 int tmio_mmc_host_runtime_resume(struct device *dev);
+#endif
 
 static inline u16 sd_ctrl_read16(struct tmio_mmc_host *host, int addr)
 {
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 8d8abf23a611..faf0924e71cb 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -1142,7 +1142,7 @@ void tmio_mmc_host_remove(struct tmio_mmc_host *host)
 }
 EXPORT_SYMBOL(tmio_mmc_host_remove);
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 int tmio_mmc_host_suspend(struct device *dev)
 {
 	struct mmc_host *mmc = dev_get_drvdata(dev);
@@ -1165,9 +1165,9 @@ int tmio_mmc_host_resume(struct device *dev)
 	return 0;
 }
 EXPORT_SYMBOL(tmio_mmc_host_resume);
+#endif
 
-#endif	/* CONFIG_PM */
-
+#ifdef CONFIG_PM_RUNTIME
 int tmio_mmc_host_runtime_suspend(struct device *dev)
 {
 	return 0;
@@ -1184,5 +1184,6 @@ int tmio_mmc_host_runtime_resume(struct device *dev)
 	return 0;
 }
 EXPORT_SYMBOL(tmio_mmc_host_runtime_resume);
+#endif
 
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/mmc/host/ushc.c b/drivers/mmc/host/ushc.c
index c0105a2e269a..d2c386f09d69 100644
--- a/drivers/mmc/host/ushc.c
+++ b/drivers/mmc/host/ushc.c
@@ -504,7 +504,7 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 		ret = -ENOMEM;
 		goto err;
 	}
-	ushc->csw = kzalloc(sizeof(struct ushc_cbw), GFP_KERNEL);
+	ushc->csw = kzalloc(sizeof(struct ushc_csw), GFP_KERNEL);
 	if (ushc->csw == NULL) {
 		ret = -ENOMEM;
 		goto err;
diff --git a/drivers/mmc/host/wmt-sdmmc.c b/drivers/mmc/host/wmt-sdmmc.c
index e902ed7846b0..498d1f799085 100644
--- a/drivers/mmc/host/wmt-sdmmc.c
+++ b/drivers/mmc/host/wmt-sdmmc.c
@@ -757,7 +757,7 @@ static int wmt_mci_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	const struct of_device_id *of_id =
 		of_match_device(wmt_mci_dt_ids, &pdev->dev);
-	const struct wmt_mci_caps *wmt_caps = of_id->data;
+	const struct wmt_mci_caps *wmt_caps;
 	int ret;
 	int regular_irq, dma_irq;
 
@@ -766,6 +766,8 @@ static int wmt_mci_probe(struct platform_device *pdev)
 		return -EFAULT;
 	}
 
+	wmt_caps = of_id->data;
+
 	if (!np) {
 		dev_err(&pdev->dev, "Missing SDMMC description in devicetree\n");
 		return -EFAULT;
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 1cd8584a7b88..903eb37f047a 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -392,6 +392,15 @@ config REGULATOR_PALMAS
 	  on the muxing. This is handled automatically in the driver by
 	  reading the mux info from OTP.
 
+config REGULATOR_PBIAS
+	tristate "PBIAS OMAP regulator driver"
+	depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
+	help
+	 Say y here to support pbias regulator for mmc1:SD card i/o
+	 on OMAP SoCs.
+	 This driver provides support for OMAP pbias modelled
+	 regulators.
+
 config REGULATOR_PCAP
 	tristate "Motorola PCAP2 regulator driver"
 	depends on EZX_PCAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index f0fe0c50b59c..12ef277a48b4 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
 obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
 obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
+obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
diff --git a/drivers/regulator/pbias-regulator.c b/drivers/regulator/pbias-regulator.c
new file mode 100644
index 000000000000..ded3b3574209
--- /dev/null
+++ b/drivers/regulator/pbias-regulator.c
@@ -0,0 +1,255 @@
+/*
+ * pbias-regulator.c
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Balaji T K <balajitk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+struct pbias_reg_info {
+	u32 enable;
+	u32 enable_mask;
+	u32 vmode;
+	unsigned int enable_time;
+	char *name;
+};
+
+struct pbias_regulator_data {
+	struct regulator_desc desc;
+	void __iomem *pbias_addr;
+	unsigned int pbias_reg;
+	struct regulator_dev *dev;
+	struct regmap *syscon;
+	const struct pbias_reg_info *info;
+	int voltage;
+};
+
+static int pbias_regulator_set_voltage(struct regulator_dev *dev,
+			int min_uV, int max_uV, unsigned *selector)
+{
+	struct pbias_regulator_data *data = rdev_get_drvdata(dev);
+	const struct pbias_reg_info *info = data->info;
+	int ret, vmode;
+
+	if (min_uV <= 1800000)
+		vmode = 0;
+	else if (min_uV > 1800000)
+		vmode = info->vmode;
+
+	ret = regmap_update_bits(data->syscon, data->pbias_reg,
+						info->vmode, vmode);
+
+	return ret;
+}
+
+static int pbias_regulator_get_voltage(struct regulator_dev *rdev)
+{
+	struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+	const struct pbias_reg_info *info = data->info;
+	int value, voltage;
+
+	regmap_read(data->syscon, data->pbias_reg, &value);
+	value &= info->vmode;
+
+	voltage = value ? 3000000 : 1800000;
+
+	return voltage;
+}
+
+static int pbias_regulator_enable(struct regulator_dev *rdev)
+{
+	struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+	const struct pbias_reg_info *info = data->info;
+	int ret;
+
+	ret = regmap_update_bits(data->syscon, data->pbias_reg,
+					info->enable_mask, info->enable);
+
+	return ret;
+}
+
+static int pbias_regulator_disable(struct regulator_dev *rdev)
+{
+	struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+	const struct pbias_reg_info *info = data->info;
+	int ret;
+
+	ret = regmap_update_bits(data->syscon, data->pbias_reg,
+						info->enable_mask, 0);
+	return ret;
+}
+
+static int pbias_regulator_is_enable(struct regulator_dev *rdev)
+{
+	struct pbias_regulator_data *data = rdev_get_drvdata(rdev);
+	const struct pbias_reg_info *info = data->info;
+	int value;
+
+	regmap_read(data->syscon, data->pbias_reg, &value);
+
+	return (value & info->enable_mask) == info->enable_mask;
+}
+
+static struct regulator_ops pbias_regulator_voltage_ops = {
+	.set_voltage	= pbias_regulator_set_voltage,
+	.get_voltage	= pbias_regulator_get_voltage,
+	.enable		= pbias_regulator_enable,
+	.disable	= pbias_regulator_disable,
+	.is_enabled	= pbias_regulator_is_enable,
+};
+
+static const struct pbias_reg_info pbias_mmc_omap2430 = {
+	.enable = BIT(1),
+	.enable_mask = BIT(1),
+	.vmode = BIT(0),
+	.enable_time = 100,
+	.name = "pbias_mmc_omap2430"
+};
+
+static const struct pbias_reg_info pbias_sim_omap3 = {
+	.enable = BIT(9),
+	.enable_mask = BIT(9),
+	.vmode = BIT(8),
+	.enable_time = 100,
+	.name = "pbias_sim_omap3"
+};
+
+static const struct pbias_reg_info pbias_mmc_omap4 = {
+	.enable = BIT(26) | BIT(22),
+	.enable_mask = BIT(26) | BIT(25) | BIT(22),
+	.vmode = BIT(21),
+	.enable_time = 100,
+	.name = "pbias_mmc_omap4"
+};
+
+static const struct pbias_reg_info pbias_mmc_omap5 = {
+	.enable = BIT(27) | BIT(26),
+	.enable_mask = BIT(27) | BIT(25) | BIT(26),
+	.vmode = BIT(21),
+	.enable_time = 100,
+	.name = "pbias_mmc_omap5"
+};
+
+static struct of_regulator_match pbias_matches[] = {
+	{ .name = "pbias_mmc_omap2430", .driver_data = (void *)&pbias_mmc_omap2430},
+	{ .name = "pbias_sim_omap3", .driver_data = (void *)&pbias_sim_omap3},
+	{ .name = "pbias_mmc_omap4", .driver_data = (void *)&pbias_mmc_omap4},
+	{ .name = "pbias_mmc_omap5", .driver_data = (void *)&pbias_mmc_omap5},
+};
+#define PBIAS_NUM_REGS	ARRAY_SIZE(pbias_matches)
+
+static const struct of_device_id pbias_of_match[] = {
+	{ .compatible = "ti,pbias-omap", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pbias_of_match);
+
+static int pbias_regulator_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct pbias_regulator_data *drvdata;
+	struct resource *res;
+	struct regulator_config cfg = { };
+	struct regmap *syscon;
+	const struct pbias_reg_info *info;
+	int ret = 0;
+	int count, idx, data_idx = 0;
+
+	count = of_regulator_match(&pdev->dev, np, pbias_matches,
+						PBIAS_NUM_REGS);
+	if (count < 0)
+		return count;
+
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct pbias_regulator_data)
+			       * count, GFP_KERNEL);
+	if (drvdata == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate device data\n");
+		return -ENOMEM;
+	}
+
+	syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
+	if (IS_ERR(syscon))
+		return PTR_ERR(syscon);
+
+	cfg.dev = &pdev->dev;
+
+	for (idx = 0; idx < PBIAS_NUM_REGS && data_idx < count; idx++) {
+		if (!pbias_matches[idx].init_data ||
+			!pbias_matches[idx].of_node)
+			continue;
+
+		info = pbias_matches[idx].driver_data;
+		if (!info)
+			return -ENODEV;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		if (!res)
+			return -EINVAL;
+
+		drvdata[data_idx].pbias_reg = res->start;
+		drvdata[data_idx].syscon = syscon;
+		drvdata[data_idx].info = info;
+		drvdata[data_idx].desc.name = info->name;
+		drvdata[data_idx].desc.owner = THIS_MODULE;
+		drvdata[data_idx].desc.type = REGULATOR_VOLTAGE;
+		drvdata[data_idx].desc.ops = &pbias_regulator_voltage_ops;
+		drvdata[data_idx].desc.n_voltages = 2;
+		drvdata[data_idx].desc.enable_time = info->enable_time;
+
+		cfg.init_data = pbias_matches[idx].init_data;
+		cfg.driver_data = &drvdata[data_idx];
+		cfg.of_node = pbias_matches[idx].of_node;
+
+		drvdata[data_idx].dev = devm_regulator_register(&pdev->dev,
+					&drvdata[data_idx].desc, &cfg);
+		if (IS_ERR(drvdata[data_idx].dev)) {
+			ret = PTR_ERR(drvdata[data_idx].dev);
+			dev_err(&pdev->dev,
+				"Failed to register regulator: %d\n", ret);
+			goto err_regulator;
+		}
+		data_idx++;
+	}
+
+	platform_set_drvdata(pdev, drvdata);
+
+err_regulator:
+	return ret;
+}
+
+static struct platform_driver pbias_regulator_driver = {
+	.probe		= pbias_regulator_probe,
+	.driver		= {
+		.name		= "pbias-regulator",
+		.owner		= THIS_MODULE,
+		.of_match_table = of_match_ptr(pbias_of_match),
+	},
+};
+
+module_platform_driver(pbias_regulator_driver);
+
+MODULE_AUTHOR("Balaji T K <balajitk@ti.com>");
+MODULE_DESCRIPTION("pbias voltage regulator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pbias-regulator");
diff --git a/include/linux/mfd/rtsx_common.h b/include/linux/mfd/rtsx_common.h
index 443176ee1ab0..7c36cc55d2c7 100644
--- a/include/linux/mfd/rtsx_common.h
+++ b/include/linux/mfd/rtsx_common.h
@@ -45,6 +45,7 @@ struct platform_device;
 struct rtsx_slot {
 	struct platform_device	*p_dev;
 	void			(*card_event)(struct platform_device *p_dev);
+	void			(*done_transfer)(struct platform_device *p_dev);
 };
 
 #endif
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index 0ce772105508..8d6bbd609ad9 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -144,7 +144,7 @@
 #define HOST_TO_DEVICE		0
 #define DEVICE_TO_HOST		1
 
-#define MAX_PHASE		31
+#define RTSX_PHASE_MAX		32
 #define RX_TUNING_CNT		3
 
 /* SG descriptor */
@@ -943,6 +943,12 @@ void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr);
 int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout);
 int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist,
 		int num_sg, bool read, int timeout);
+int rtsx_pci_dma_map_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+		int num_sg, bool read);
+int rtsx_pci_dma_unmap_sg(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+		int num_sg, bool read);
+int rtsx_pci_dma_transfer(struct rtsx_pcr *pcr, struct scatterlist *sglist,
+		int sg_count, bool read);
 int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len);
 int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len);
 int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card);
diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h
index 87079fc38011..f206e29f94d7 100644
--- a/include/linux/mmc/core.h
+++ b/include/linux/mmc/core.h
@@ -95,7 +95,7 @@ struct mmc_command {
  *              actively failing requests
  */
 
-	unsigned int		cmd_timeout_ms;	/* in milliseconds */
+	unsigned int		busy_timeout;	/* busy detect timeout in ms */
 	/* Set this flag only for blocking sanitize request */
 	bool			sanitize_busy;
 
@@ -152,7 +152,7 @@ extern int mmc_wait_for_app_cmd(struct mmc_host *, struct mmc_card *,
 	struct mmc_command *, int);
 extern void mmc_start_bkops(struct mmc_card *card, bool from_exception);
 extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool,
-			bool);
+			bool, bool);
 extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
 extern int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
 
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 99f5709ac343..cb61ea4d6945 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -264,15 +264,12 @@ struct mmc_host {
 	u32			caps2;		/* More host capabilities */
 
 #define MMC_CAP2_BOOTPART_NOACC	(1 << 0)	/* Boot partition no access */
-#define MMC_CAP2_CACHE_CTRL	(1 << 1)	/* Allow cache control */
 #define MMC_CAP2_FULL_PWR_CYCLE	(1 << 2)	/* Can do full power cycle */
 #define MMC_CAP2_NO_MULTI_READ	(1 << 3)	/* Multiblock reads don't work */
-#define MMC_CAP2_NO_SLEEP_CMD	(1 << 4)	/* Don't allow sleep command */
 #define MMC_CAP2_HS200_1_8V_SDR	(1 << 5)        /* can support */
 #define MMC_CAP2_HS200_1_2V_SDR	(1 << 6)        /* can support */
 #define MMC_CAP2_HS200		(MMC_CAP2_HS200_1_8V_SDR | \
 				 MMC_CAP2_HS200_1_2V_SDR)
-#define MMC_CAP2_BROKEN_VOLTAGE	(1 << 7)	/* Use the broken voltage */
 #define MMC_CAP2_HC_ERASE_SZ	(1 << 9)	/* High-capacity erase size */
 #define MMC_CAP2_CD_ACTIVE_HIGH	(1 << 10)	/* Card-detect signal active high */
 #define MMC_CAP2_RO_ACTIVE_HIGH	(1 << 11)	/* Write-protect signal active high */
@@ -281,7 +278,6 @@ struct mmc_host {
 #define MMC_CAP2_PACKED_CMD	(MMC_CAP2_PACKED_RD | \
 				 MMC_CAP2_PACKED_WR)
 #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14)	/* Don't power up before scan */
-#define MMC_CAP2_SANITIZE	(1 << 15)		/* Support Sanitize */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
@@ -304,7 +300,7 @@ struct mmc_host {
 	unsigned int		max_req_size;	/* maximum number of bytes in one req */
 	unsigned int		max_blk_size;	/* maximum size of one mmc block */
 	unsigned int		max_blk_count;	/* maximum number of blocks in one req */
-	unsigned int		max_discard_to;	/* max. discard timeout in ms */
+	unsigned int		max_busy_timeout; /* max busy timeout in ms */
 
 	/* private data */
 	spinlock_t		lock;		/* lock for claim and bus ops */
@@ -388,8 +384,6 @@ int mmc_power_restore_host(struct mmc_host *host);
 void mmc_detect_change(struct mmc_host *, unsigned long delay);
 void mmc_request_done(struct mmc_host *, struct mmc_request *);
 
-int mmc_cache_ctrl(struct mmc_host *, u8);
-
 static inline void mmc_signal_sdio_irq(struct mmc_host *host)
 {
 	host->ops->enable_sdio_irq(host, 0);
@@ -424,12 +418,9 @@ static inline int mmc_regulator_get_supply(struct mmc_host *mmc)
 
 int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *);
 
-/* Module parameter */
-extern bool mmc_assume_removable;
-
 static inline int mmc_card_is_removable(struct mmc_host *host)
 {
-	return !(host->caps & MMC_CAP_NONREMOVABLE) && mmc_assume_removable;
+	return !(host->caps & MMC_CAP_NONREMOVABLE);
 }
 
 static inline int mmc_card_keep_power(struct mmc_host *host)
diff --git a/include/linux/mmc/sdhci-spear.h b/include/linux/mmc/sdhci-spear.h
index e78c0e236e9d..8cc095a76cf8 100644
--- a/include/linux/mmc/sdhci-spear.h
+++ b/include/linux/mmc/sdhci-spear.h
@@ -18,17 +18,9 @@
 /*
  * struct sdhci_plat_data: spear sdhci platform data structure
  *
- * @card_power_gpio: gpio pin for enabling/disabling power to sdhci socket
- * @power_active_high: if set, enable power to sdhci socket by setting
- *			card_power_gpio
- * @power_always_enb: If set, then enable power on probe, otherwise enable only
- *			on card insertion and disable on card removal.
  * card_int_gpio: gpio pin used for card detection
  */
 struct sdhci_plat_data {
-	int card_power_gpio;
-	int power_active_high;
-	int power_always_enb;
 	int card_int_gpio;
 };
 
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 362927c48f97..7be12b883485 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -100,6 +100,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK2_BROKEN_HOST_CONTROL		(1<<5)
 /* Controller does not support HS200 */
 #define SDHCI_QUIRK2_BROKEN_HS200			(1<<6)
+/* Controller does not support DDR50 */
+#define SDHCI_QUIRK2_BROKEN_DDR50			(1<<7)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h
index b0c73e4cacea..d2433381e828 100644
--- a/include/linux/mmc/slot-gpio.h
+++ b/include/linux/mmc/slot-gpio.h
@@ -22,4 +22,10 @@ int mmc_gpio_request_cd(struct mmc_host *host, unsigned int gpio,
 			unsigned int debounce);
 void mmc_gpio_free_cd(struct mmc_host *host);
 
+int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
+			 unsigned int idx, bool override_active_level,
+			 unsigned int debounce);
+void mmc_gpiod_free_cd(struct mmc_host *host);
+void mmc_gpiod_request_cd_irq(struct mmc_host *host);
+
 #endif
diff --git a/include/linux/platform_data/mmc-msm_sdcc.h b/include/linux/platform_data/mmc-msm_sdcc.h
index ffcd9e3a6a7e..55aa873c9396 100644
--- a/include/linux/platform_data/mmc-msm_sdcc.h
+++ b/include/linux/platform_data/mmc-msm_sdcc.h
@@ -1,8 +1,5 @@
-/*
- *  arch/arm/include/asm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
+#ifndef __MMC_MSM_SDCC_H
+#define __MMC_MSM_SDCC_H
 
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
diff --git a/include/linux/platform_data/mmc-mvsdio.h b/include/linux/platform_data/mmc-mvsdio.h
index 1190efedcb94..d02704cd3695 100644
--- a/include/linux/platform_data/mmc-mvsdio.h
+++ b/include/linux/platform_data/mmc-mvsdio.h
@@ -1,13 +1,11 @@
 /*
- * arch/arm/plat-orion/include/plat/mvsdio.h
- *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#ifndef __MACH_MVSDIO_H
-#define __MACH_MVSDIO_H
+#ifndef __MMC_MVSDIO_H
+#define __MMC_MVSDIO_H
 
 #include <linux/mbus.h>