diff options
Diffstat (limited to 'src/usr/hwpf/hwp/bus_training')
| -rw-r--r-- | src/usr/hwpf/hwp/bus_training/io_cleanup.C | 327 | ||||
| -rw-r--r-- | src/usr/hwpf/hwp/bus_training/io_cleanup.H | 55 | ||||
| -rw-r--r-- | src/usr/hwpf/hwp/bus_training/makefile | 3 |
3 files changed, 384 insertions, 1 deletions
diff --git a/src/usr/hwpf/hwp/bus_training/io_cleanup.C b/src/usr/hwpf/hwp/bus_training/io_cleanup.C new file mode 100644 index 000000000..14e5f0d76 --- /dev/null +++ b/src/usr/hwpf/hwp/bus_training/io_cleanup.C @@ -0,0 +1,327 @@ +/* IBM_PROLOG_BEGIN_TAG */ +/* This is an automatically generated prolog. */ +/* */ +/* $Source: src/usr/hwpf/hwp/bus_training/io_cleanup.C $ */ +/* */ +/* IBM CONFIDENTIAL */ +/* */ +/* COPYRIGHT International Business Machines Corp. 2013 */ +/* */ +/* p1 */ +/* */ +/* Object Code Only (OCO) source materials */ +/* Licensed Internal Code Source Materials */ +/* IBM HostBoot Licensed Internal Code */ +/* */ +/* The source code for this program is not published or otherwise */ +/* divested of its trade secrets, irrespective of what has been */ +/* deposited with the U.S. Copyright Office. */ +/* */ +/* Origin: 30 */ +/* */ +/* IBM_PROLOG_END_TAG */ +// $Id: io_cleanup.C,v 1.3 2013/12/12 08:41:30 varkeykv Exp $
+// *!***************************************************************************
+// *! (C) Copyright International Business Machines Corp. 1997, 1998
+// *! All Rights Reserved -- Property of IBM
+// *! *** IBM Confidential ***
+// *!***************************************************************************
+// *! FILENAME : io_cleanup.C
+// *! TITLE :
+// *! DESCRIPTION : Cleanup procedure for re-init loop
+// *! CONTEXT :
+// *!
+// *! OWNER NAME : Varghese, Varkey Email: varkey.kv@in.ibm.com
+// *! BACKUP NAME : Janani Swaminathan Email: jaswamin@in.ibm.com
+// *!
+// *!***************************************************************************
+// CHANGE HISTORY:
+//------------------------------------------------------------------------------
+// Version:|Author: | Date: | Comment:
+// --------|--------|--------|--------------------------------------------------
+// 1.0 |varkeykv|07/30/11|Initial check in .
+//------------------------------------------------------------------------------
+#include <fapi.H>
+#include "io_cleanup.H"
+#include "gcr_funcs.H"
+
+
+
+extern "C" {
+ using namespace fapi;
+// For clearing the FIR mask , used by io run training
+// As per Irving , it should be ok to clear all FIRs here since we will scom init , also we dont touch mask values
+ReturnCode clear_fir_reg(const Target &i_target,fir_io_interface_t i_chip_interface){
+ ReturnCode rc;
+ ecmdDataBufferBase data(64);
+ FAPI_INF("io_cleanup:In the Clear FIR RW register function ");
+
+ // use FIR AND mask register to un-mask selected bits
+ rc = fapiPutScom(i_target, fir_rw_reg_addr[i_chip_interface], data);
+ if (!rc.ok())
+ {
+ FAPI_ERR("Error writing FIR mask register (=%08X)!",
+ fir_rw_reg_addr[i_chip_interface]);
+ }
+ return(rc);
+}
+
+/*
+ from Megan's ipl1.sh
+
+ istep -s0..11
+## forcing channel fail
+getscom pu 02011C4A -pall -call -vs1
+ getscom cen 0201080A -pall -call -vs1
+ putscom pu 02011C4A 8000000480400000 -pall -call
+ putscom cen 0201080A 8000000000000000 -pall -call
+ getscom pu 02011C4A -pall -call -vs1
+ getscom cen 0201080A -pall -call -vs1
+## masking fir bit
+putscom pu.mcs 2011843 FFFFFFFFFFFFFFFF -all
+### IO reset
+iotk put rx_fence=1 -t=p8:bmcs
+iotk put rx_fence=1 -t=cn
+iotk put ioreset_hard_bus0=111111 -t=p8:bmcs
+iotk put ioreset_hard_bus0=111111 -t=cn
+
+#exit
+##clear_fir
+./clear_fir.pl
+### Reload
+istep proc_dmi_scominit
+istep dmi_scominit
+##checking Zcal
+iotk get tx_zcal_p_4x -t=p8:bmcs
+iotk get tx_zcal_p_4x -t=cn
+iotk get tx_zcal_sm_min_val -t=p8:bmcs
+iotk get tx_zcal_sm_min_val -t=cn
+iotk get tx_zcal_sm_max_val -t=p8:bmcs
+iotk get tx_zcal_sm_max_val -t=cn
+### Loading Zcal
+iotk put tx_zcal_p_4x=00100
+iotk put tx_zcal_sm_min_val=0010101
+iotk put tx_zcal_sm_max_val=1000110
+## Runing Zcal
+istep dmi_io_dccal
+## forcing channel fail
+ getscom pu 02011C4A -pall -call -vs1
+ getscom cen 0201080A -pall -call -vs1
+ putscom pu 02011C4A 8000000480400000 -pall -call
+ putscom cen 0201080A 8000000000000000 -pall -call
+ getscom pu 02011C4A -pall -call -vs1
+ getscom cen 0201080A -pall -call -vs1
+
+
+
+
+
+*/
+
+ReturnCode do_cleanup(const Target &master_target,io_interface_t master_interface,uint32_t master_group,const Target &slave_target,io_interface_t slave_interface,uint32_t slave_group)
+{
+ ReturnCode rc;
+ uint32_t rc_ecmd = 0;
+ uint8_t chip_unit = 0;
+ // uint8_t link_fir_unmask_data = 0x8F;
+ ecmdDataBufferBase data(64);
+ ecmdDataBufferBase reg_data(16),set_bits(16),clear_bits(16),temp_bits(16);
+
+ //iotk put rx_fence=1 -t=p8:bmcs
+ // No other field in this reg , so no need for RMW
+ rc_ecmd = temp_bits.setBit(0);
+ if(rc_ecmd)
+ {
+ rc.setEcmdError(rc_ecmd);
+ return(rc);
+ }
+ rc=GCR_write(master_target, master_interface, rx_fence_pg, master_group,0, temp_bits, temp_bits,1,1);
+ if(rc) return rc;
+
+ //iotk put rx_fence=1 -t=cn
+ rc=GCR_write(slave_target, slave_interface, rx_fence_pg, slave_group,0, temp_bits, temp_bits,1,1);
+ if(rc) return rc;
+
+ rc = FAPI_ATTR_GET(ATTR_CHIP_UNIT_POS,
+ &master_target,
+ chip_unit);
+ if (!rc.ok())
+ {
+ FAPI_ERR("Error retreiving MCS chiplet number!");
+ return rc;
+ }
+
+ // swizzle to DMI number
+ if (master_interface == CP_IOMC0_P0)
+ {
+ chip_unit = 3-(chip_unit % 4);
+ // swap 0 and 1 due to Clock group swap in layout
+ if(chip_unit==1){
+ chip_unit=0;
+ }
+ else if(chip_unit==0){
+ chip_unit=1;
+ }
+
+
+ FAPI_DBG("CHIP UNIT IS %d",chip_unit);
+
+ }
+ rc = fapiGetScom(master_target, scom_mode_pb_reg_addr[FIR_CP_IOMC0_P0], data);
+ if (!rc.ok())
+ {
+ FAPI_ERR("Error Reading SCOM mode PB register for ioreset_hard_bus0 on master side(=%08X)!",
+ scom_mode_pb_reg_addr[FIR_CP_IOMC0_P0]);
+ return rc;
+ }
+
+ rc_ecmd = data.setBit(2+chip_unit,1); // Scom_mode_pb ,ioreset starts at bit 2
+ if(rc_ecmd)
+ {
+ rc.setEcmdError(rc_ecmd);
+ return(rc);
+ }
+ FAPI_DBG("Writing the Hard reset on PU ");
+ // use FIR AND mask register to un-mask selected bits
+ rc = fapiPutScom(master_target, scom_mode_pb_reg_addr[FIR_CP_IOMC0_P0], data);
+ if (!rc.ok())
+ {
+ FAPI_ERR("Error writing SCOM mode PB register for ioreset_hard_bus0 on master side(=%08X)!",
+ scom_mode_pb_reg_addr[FIR_CP_IOMC0_P0]);
+ return rc;
+ }
+
+ rc_ecmd = data.flushTo0();
+ if(rc_ecmd)
+ {
+ rc.setEcmdError(rc_ecmd);
+ return(rc);
+ }
+ // Centaur is always bus0 in reset register
+ if(slave_interface == CEN_DMI){
+ chip_unit=0;
+ }
+ rc = fapiGetScom(slave_target, scom_mode_pb_reg_addr[FIR_CEN_DMI], data);
+ if (!rc.ok())
+ {
+ FAPI_ERR("Error Reading SCOM mode PB register for ioreset_hard_bus0 on Slave side(=%08X)!",
+ scom_mode_pb_reg_addr[FIR_CEN_DMI]);
+ return rc;
+ }
+ rc_ecmd = data.setBit(2+chip_unit,1); // Scom_mode_pb ,ioreset starts at bit 2
+ if(rc_ecmd)
+ {
+ rc.setEcmdError(rc_ecmd);
+ return(rc);
+ }
+ // use FIR AND mask register to un-mask selected bits
+ rc = fapiPutScom(slave_target, scom_mode_pb_reg_addr[FIR_CEN_DMI], data);
+ if (!rc.ok())
+ {
+ FAPI_ERR("Error writing SCOM mode PB register for ioreset_hard_bus0 on Slave side(=%08X)!",
+ scom_mode_pb_reg_addr[FIR_CEN_DMI]);
+ return rc;
+ }
+
+
+ // NOW We clear FIRS.. need to see if we need to do this or some other procedure will do this . Bellows/Irving to respond
+
+ rc = clear_fir_reg(slave_target,FIR_CEN_DMI);
+ if(rc)
+ {
+ return(rc);
+ }
+ rc = clear_fir_reg(master_target,FIR_CP_IOMC0_P0);
+ if(rc)
+ {
+ return(rc);
+ }
+ return rc;
+}
+
+// Determines if target is a master...
+static ReturnCode isChipMaster(const Target& chip_target, io_interface_t chip_interface,uint32_t current_group, bool & masterchip_found ) {
+ ReturnCode rc;
+ ecmdDataBufferBase mode_data(16);
+ masterchip_found=false;
+
+ // Check if rx_master_mode bit is set for chip
+ // Read rx_master_mode for chip
+ if(chip_interface==CP_FABRIC_X0)
+ {
+ rc=GCR_read(chip_target , chip_interface, ei4_rx_mode_pg, current_group,0, mode_data);
+ }
+ else
+ {
+ rc=GCR_read(chip_target , chip_interface, rx_mode_pg, current_group,0, mode_data);
+ }
+ if (rc) {
+ FAPI_ERR("io_cleanup: Error reading master mode bit\n");
+ }
+ else
+ {
+ // Check if chip is master
+ if (mode_data.isBitSet(0)) {
+ FAPI_DBG("This chip is a master\n");
+ masterchip_found =true;
+ }
+ }
+ return(rc);
+}
+
+
+// Cleans up for Centaur Reconfig or Abus hot plug case
+ReturnCode io_cleanup(const Target &master_target,const Target &slave_target){
+ ReturnCode rc;
+ io_interface_t master_interface,slave_interface;
+ uint32_t master_group=0;
+ uint32_t slave_group=0;
+ // const uint32_t max_group=4; // Num of X bus groups in one bus
+
+ bool is_master=false;
+
+
+ // This is a DMI/MC bus
+ if( (master_target.getType() == fapi::TARGET_TYPE_MCS_CHIPLET )&& (slave_target.getType() == fapi::TARGET_TYPE_MEMBUF_CHIP)){
+ FAPI_DBG("This is a DMI bus using base DMI scom address");
+ master_interface=CP_IOMC0_P0; // base scom for MC bus
+ slave_interface=CEN_DMI; // Centaur scom base
+ master_group=3; // Design requires us to do this as per scom map and layout
+ slave_group=0;
+ rc=isChipMaster(master_target,master_interface,master_group,is_master);
+ if(rc.ok()){
+ if(!is_master)
+ {
+ FAPI_DBG("DMI Bus ..target swap performed");
+ rc=do_cleanup(slave_target,slave_interface,slave_group,master_target,master_interface,master_group);
+ if(rc) return rc;
+ }
+ else
+ {
+ rc=do_cleanup(master_target,master_interface,master_group,slave_target,slave_interface,slave_group);
+ if(rc) return rc;
+ }
+ }
+ }
+ //This is an A Bus
+ else if( (master_target.getType() == fapi::TARGET_TYPE_ABUS_ENDPOINT )&& (slave_target.getType() == fapi::TARGET_TYPE_ABUS_ENDPOINT)){
+ FAPI_DBG("This is an A Bus training invocation");
+ master_interface=CP_FABRIC_A0; // base scom for A bus , assume translation to A1 by PLAT
+ slave_interface=CP_FABRIC_A0; //base scom for A bus
+ master_group=0; // Design requires us to do this as per scom map and layout
+ slave_group=0;
+ rc=isChipMaster(master_target,master_interface,master_group,is_master);
+ if(rc.ok()){
+ // Now only for DMI
+ }
+ }
+ else{
+ FAPI_ERR("Invalid io_cleanup HWP invocation . Pair of targets dont belong to DMI or A bus instances");
+ FAPI_SET_HWP_ERROR(rc, IO_RUN_TRAINING_INVALID_INVOCATION_RC);
+ }
+ return rc;
+}
+
+
+
+} // extern
diff --git a/src/usr/hwpf/hwp/bus_training/io_cleanup.H b/src/usr/hwpf/hwp/bus_training/io_cleanup.H new file mode 100644 index 000000000..3368d20a2 --- /dev/null +++ b/src/usr/hwpf/hwp/bus_training/io_cleanup.H @@ -0,0 +1,55 @@ +/* IBM_PROLOG_BEGIN_TAG */ +/* This is an automatically generated prolog. */ +/* */ +/* $Source: src/usr/hwpf/hwp/bus_training/io_cleanup.H $ */ +/* */ +/* IBM CONFIDENTIAL */ +/* */ +/* COPYRIGHT International Business Machines Corp. 2013 */ +/* */ +/* p1 */ +/* */ +/* Object Code Only (OCO) source materials */ +/* Licensed Internal Code Source Materials */ +/* IBM HostBoot Licensed Internal Code */ +/* */ +/* The source code for this program is not published or otherwise */ +/* divested of its trade secrets, irrespective of what has been */ +/* deposited with the U.S. Copyright Office. */ +/* */ +/* Origin: 30 */ +/* */ +/* IBM_PROLOG_END_TAG */ +//$Id: io_cleanup.H,v 1.1 2013/07/30 12:00:50 varkeykv Exp $
+#ifndef IO_CLEANUP_H_
+#define IO_CLEANUP_H_
+
+#include <fapi.H>
+#include "io_clear_firs.H"
+
+using namespace fapi;
+
+/**
+ * io_cleanup func pointer Typedef for hostboot
+ *
+ */
+typedef fapi::ReturnCode (*io_cleanup_FP_t)(const fapi::Target &,const fapi::Target &);
+
+extern "C"
+{
+
+/**
+ * io_cleanup
+ *
+ * master_target is the master side of a bus ..p8.mcs in a DMI .. or a p8.abus/p8.xbus in fabric
+ * slave_target - slave side of the bus .. Centaur in DMI , p8.xbus or p8.abus for fabric
+ * while these are called master or slave... I actually do a check in the code to see
+ * whether these are actually master chips by reading a GCR master_mode bit
+ * and accordingly will perform a target swap if required
+ * @return ReturnCode
+ */
+fapi::ReturnCode io_cleanup(const fapi::Target &master_target,const fapi::Target & slave_target);
+
+} // extern "C"
+
+#endif // IO_cleanup_H
diff --git a/src/usr/hwpf/hwp/bus_training/makefile b/src/usr/hwpf/hwp/bus_training/makefile index bbda4eb5a..03a29a6ef 100644 --- a/src/usr/hwpf/hwp/bus_training/makefile +++ b/src/usr/hwpf/hwp/bus_training/makefile @@ -46,7 +46,8 @@ OBJS = gcr_funcs.o io_funcs.o io_run_training.o pbusLinkSvc.o proc_fab_smp.o \ erepairGetFailedLanesHwp.o \ erepairSetFailedLanesHwp.o \ io_post_trainadv.o \ - io_pre_trainadv.o + io_pre_trainadv.o \ + io_cleanup.o ## NOTE: add a new directory onto the vpaths when you add a new HWP |
