| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
| |
The reversion apparently deleted the test/Transforms directory.
Will be re-reverting again.
llvm-svn: 358552
|
| |
|
|
|
|
|
|
| |
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
|
| |
|
|
|
|
|
|
| |
bit for a recurrence with a NSW addition."
This is breaking an optimizaton remark test in clang. I've identified a couple fixes for that, but want to understand it better before I commit to anything.
llvm-svn: 274102
|
| |
|
|
|
|
|
|
|
|
|
|
| |
a recurrence with a NSW addition.
If a operation for a recurrence is an addition with no signed wrap and both input sign bits are 0, then the result sign bit must also be 0. Similar for the negative case.
I found this deficiency while playing around with a loop in the x86 backend that contained a signed division that could be optimized into an unsigned division if we could prove both inputs were positive. One of them being the loop induction variable. With this patch we can perform the conversion for this case. One of the test cases here is a contrived variation of the loop I was looking at.
Differential revision: http://reviews.llvm.org/D21493
llvm-svn: 274098
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Summary:
When a PHI is used only to be compared with zero, it is possible to replace an
incoming value with any non-zero constant if the incoming value can be proved as
a known nonzero value. For example, in below code, we can replace the incoming value %v with
any non-zero constant based on the fact that the PHI is only used to be compared with zero
and %v is a known non-zero value:
%v = select %cond, 1, 2
%p = phi [%v, BB] ...
%c = icmp eq, %p, 0
Reviewers: mcrosier, jmolloy, sanjoy
Subscribers: hfinkel, mcrosier, majnemer, llvm-commits, haicheng, bmakam, mssimpso, gberry
Differential Revision: http://reviews.llvm.org/D16240
llvm-svn: 260530
|
| |
|
|
|
|
| |
It is clear that a PHI is a non-zero if all incoming values are non-zero constants.
llvm-svn: 259370
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is one step towards solving PR24766:
https://llvm.org/bugs/show_bug.cgi?id=24766
We were not producing the same IR for these two C functions because the store
to the temp bool causes extra zexts:
#include <stdbool.h>
bool switchy(char x1, char x2, char condition) {
bool conditionMet = false;
switch (condition) {
case 0: conditionMet = (x1 == x2); break;
case 1: conditionMet = (x1 <= x2); break;
}
return conditionMet;
}
bool switchy2(char x1, char x2, char condition) {
switch (condition) {
case 0: return (x1 == x2);
case 1: return (x1 <= x2);
}
return false;
}
As noted in the code comments, this test case manages to avoid the more general existing
phi optimizations where there are only 2 phi inputs or where there are no constant phi
args mixed in with the casts ops. It seems like a corner case, but if we don't catch it,
then I don't think we can get SimplifyCFG to further optimize towards the canonical form
for this function shown in the bug report.
Differential Revision: http://reviews.llvm.org/D12866
llvm-svn: 248689
|
| |
|
|
|
|
| |
This reverts commit r244887, it caused PR24470.
llvm-svn: 245194
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Consider this code:
BB:
%i = phi i32 [ 0, %if.then ], [ %c, %if.else ]
%add = add nsw i32 %i, %b
...
In this common case the add can be moved to the %if.else basic block, because
adding zero is an identity operation. If we go though %if.then branch it's
always a win, because add is not executed; if not, the number of instructions
stays the same.
This pattern applies also to other instructions like sub, shl, shr, ashr | 0,
mul, sdiv, div | 1.
Patch by Jakub Kuderski!
llvm-svn: 244887
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
load instruction
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
functionality change.
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
llvm-svn: 186268
|
| |
|
|
|
|
| |
properly with how the code handles all-undef PHI nodes.
llvm-svn: 155721
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
patch brings numerous advantages to LLVM. One way to look at it
is through diffstat:
109 files changed, 3005 insertions(+), 5906 deletions(-)
Removing almost 3K lines of code is a good thing. Other advantages
include:
1. Value::getType() is a simple load that can be CSE'd, not a mutating
union-find operation.
2. Types a uniqued and never move once created, defining away PATypeHolder.
3. Structs can be "named" now, and their name is part of the identity that
uniques them. This means that the compiler doesn't merge them structurally
which makes the IR much less confusing.
4. Now that there is no way to get a cycle in a type graph without a named
struct type, "upreferences" go away.
5. Type refinement is completely gone, which should make LTO much MUCH faster
in some common cases with C++ code.
6. Types are now generally immutable, so we can use "Type *" instead
"const Type *" everywhere.
Downsides of this patch are that it removes some functions from the C API,
so people using those will have to upgrade to (not yet added) new API.
"LLVM 3.0" is the right time to do this.
There are still some cleanups pending after this, this patch is large enough
as-is.
llvm-svn: 134829
|
| |
|
|
|
|
| |
with a 64-bit datalayout.
llvm-svn: 129643
|
| |
|
|
|
|
| |
common operations through a phi.
llvm-svn: 125790
|
| |
|
|
|
|
| |
result inbounds if all of the inputs are inbounds.
llvm-svn: 125785
|
| |
|
|
|
|
|
|
| |
multiple uses. In some cases, all the uses are the same operation,
so instcombine can go ahead and promote the phi. In the testcase
this pushes an add out of the loop.
llvm-svn: 123568
|
| |
|
|
|
|
|
|
|
|
|
| |
over a phi node by applying it to each operand may be wrong if the
operation and the phi node are mutually interdependent (the testcase
has a simple example of this). So only do this transform if it would
be correct to perform the operation in each predecessor of the block
containing the phi, i.e. if the other operands all dominate the phi.
This should fix the FFMPEG snow.c regression reported by İsmail Dönmez.
llvm-svn: 119347
|
| |
|
|
|
|
| |
values that are equal to the phi itself.
llvm-svn: 119161
|
| |
|
|
| |
llvm-svn: 119153
|
| |
|
|
| |
llvm-svn: 112987
|
| |
|
|
|
|
| |
from different addr spaces.
llvm-svn: 97813
|
| |
|
|
|
|
| |
used by a chain of other PHIs.
llvm-svn: 86503
|
| |
|
|
|
|
|
|
|
| |
when both the source and dest are illegal types, since it would cause
the phi to grow (for example, we shouldn't transform test14b's phi to
a phi on i320). This fixes an infinite loop on i686 bootstrap with
phi slicing turned on, so turn it back on.
llvm-svn: 86483
|
| |
|
|
|
|
| |
(SliceUpIllegalIntegerPHI) disabled.
llvm-svn: 86480
|
| |
|
|
|
|
| |
llvm-gcc bootstrap.
llvm-svn: 86478
|
| |
|
|
| |
llvm-svn: 86445
|
| |
|
|
| |
llvm-svn: 86444
|
| |
|
|
|
|
|
|
| |
not turn a PHI in a legal type into a PHI of an illegal type, and
add a new optimization that breaks up insane integer PHI nodes into
small pieces (PR3451).
llvm-svn: 86443
|
| |
|
|
|
|
|
| |
I don't know what Dan wants to do with phi-merge-gep.ll, I'll let
him deal with it because instcombine may end up sinking these.
llvm-svn: 85739
|
| |
|
|
|
|
|
| |
not the max. This didn't matter until the previous patch because
instcombine would refuse to sink loads with differenting alignments.
llvm-svn: 85738
|
| |
|
|
|
|
|
|
| |
phis, it didn't preserve the alignment of the load. This is a missed
optimization of the alignment is high and a miscompilation when the
alignment is low.
llvm-svn: 85736
|
| |
|
|
| |
llvm-svn: 85734
|
| |
|
|
| |
llvm-svn: 81257
|
| |
|
|
|
|
| |
of using llvm-as, now that opt supports this.
llvm-svn: 81226
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
important because it is sinking the loads using the GEPs, but
not the GEPs themselves. This triggers 647 times on 403.gcc
and makes the .s file much much nicer. For example before:
je LBB1_87 ## bb78
LBB1_62: ## bb77
leal 84(%esi), %eax
LBB1_63: ## bb79
movl (%eax), %eax
...
LBB1_87: ## bb78
movl $0, 4(%esp)
movl %esi, (%esp)
call L_make_decl_rtl$stub
jmp LBB1_62 ## bb77
after:
jne LBB1_63 ## bb79
LBB1_62: ## bb78
movl $0, 4(%esp)
movl %esi, (%esp)
call L_make_decl_rtl$stub
LBB1_63: ## bb79
movl 84(%esi), %eax
The input code was (and the GEPs are merged and
the PHI is now eliminated by instcombine):
br i1 %tmp233, label %bb78, label %bb77
bb77:
%tmp234 = getelementptr %struct.tree_node* %t_addr.3, i32 0, i32 0, i32 22
br label %bb79
bb78:
call void @make_decl_rtl(%struct.tree_node* %t_addr.3, i8* null) nounwind
%tmp235 = getelementptr %struct.tree_node* %t_addr.3, i32 0, i32 0, i32 22
br label %bb79
bb79:
%iftmp.12.0.in = phi %struct.rtx_def** [ %tmp235, %bb78 ], [ %tmp234, %bb77 ]
%iftmp.12.0 = load %struct.rtx_def** %iftmp.12.0.in
llvm-svn: 60322
|
| |
|
|
| |
llvm-svn: 47793
|
| |
|
|
|
|
|
| |
Make use of the END. facility on all files > 1K so that we aren't wasting CPU
cycles searching for RUN: lines that we'll never find.
llvm-svn: 36059
|
| |
|
|
|
|
| |
Upgrade tests to work with new llvm.exp version of llvm_runtest.
llvm-svn: 36013
|
|
|
llvm-svn: 33296
|
