1 files changed, 190 insertions, 0 deletions
diff --git a/llvm/test/Transforms/InstSimplify/shift-knownbits.ll b/llvm/test/Transforms/InstSimplify/shift-knownbits.ll
new file mode 100644
index 00000000000..63b9b76fd22
--- /dev/null
+++ b/llvm/test/Transforms/InstSimplify/shift-knownbits.ll
@@ -0,0 +1,190 @@
+; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
+; RUN: opt < %s -instsimplify -S | FileCheck %s
+
+; If any bits of the shift amount are known to make it exceed or equal
+; the number of bits in the type, the shift causes undefined behavior.
+
+define i32 @shl_amount_is_known_bogus(i32 %a, i32 %b) {
+; CHECK-LABEL: @shl_amount_is_known_bogus(
+; CHECK-NEXT:    ret i32 undef
+;
+  %or = or i32 %b, 32
+  %shl = shl i32 %a, %or
+  ret i32 %shl
+}
+
+; Check some weird types and the other shift ops.
+
+define i31 @lshr_amount_is_known_bogus(i31 %a, i31 %b) {
+; CHECK-LABEL: @lshr_amount_is_known_bogus(
+; CHECK-NEXT:    ret i31 undef
+;
+  %or = or i31 %b, 31
+  %shr = lshr i31 %a, %or
+  ret i31 %shr
+}
+
+define i33 @ashr_amount_is_known_bogus(i33 %a, i33 %b) {
+; CHECK-LABEL: @ashr_amount_is_known_bogus(
+; CHECK-NEXT:    ret i33 undef
+;
+  %or = or i33 %b, 33
+  %shr = ashr i33 %a, %or
+  ret i33 %shr
+}
+
+
+; If all valid bits of the shift amount are known 0, there's no shift.
+; It doesn't matter if high bits are set because that would be undefined.
+; Therefore, the only possible valid result of these shifts is %a.
+
+define i16 @ashr_amount_is_zero(i16 %a, i16 %b) {
+; CHECK-LABEL: @ashr_amount_is_zero(
+; CHECK-NEXT:    ret i16 %a
+;
+  %and = and i16 %b, 65520 ; 0xfff0
+  %shr = ashr i16 %a, %and
+  ret i16 %shr
+}
+
+define i300 @lshr_amount_is_zero(i300 %a, i300 %b) {
+; CHECK-LABEL: @lshr_amount_is_zero(
+; CHECK-NEXT:    ret i300 %a
+;
+  %and = and i300 %b, 2048
+  %shr = lshr i300 %a, %and
+  ret i300 %shr
+}
+
+define i9 @shl_amount_is_zero(i9 %a, i9 %b) {
+; CHECK-LABEL: @shl_amount_is_zero(
+; CHECK-NEXT:    ret i9 %a
+;
+  %and = and i9 %b, 496 ; 0x1f0
+  %shl = shl i9 %a, %and
+  ret i9 %shl
+}
+
+
+; Verify that we've calculated the log2 boundary of valid bits correctly for a weird type.
+
+define i9 @shl_amount_is_not_known_zero(i9 %a, i9 %b) {
+; CHECK-LABEL: @shl_amount_is_not_known_zero(
+; CHECK-NEXT:    [[AND:%.*]] = and i9 %b, -8
+; CHECK-NEXT:    [[SHL:%.*]] = shl i9 %a, [[AND]]
+; CHECK-NEXT:    ret i9 [[SHL]]
+;
+  %and = and i9 %b, 504 ; 0x1f8
+  %shl = shl i9 %a, %and
+  ret i9 %shl
+}
+
+
+; For vectors, we need all scalar elements to meet the requirements to optimize.
+
+define <2 x i32> @ashr_vector_bogus(<2 x i32> %a, <2 x i32> %b) {
+; CHECK-LABEL: @ashr_vector_bogus(
+; CHECK-NEXT:    ret <2 x i32> undef
+;
+  %or = or <2 x i32> %b, <i32 32, i32 32>
+  %shr = ashr <2 x i32> %a, %or
+  ret <2 x i32> %shr
+}
+
+; FIXME: This is undef, but computeKnownBits doesn't handle the union.
+define <2 x i32> @shl_vector_bogus(<2 x i32> %a, <2 x i32> %b) {
+; CHECK-LABEL: @shl_vector_bogus(
+; CHECK-NEXT:    [[OR:%.*]] = or <2 x i32> %b, <i32 32, i32 64>
+; CHECK-NEXT:    [[SHL:%.*]] = shl <2 x i32> %a, [[OR]]
+; CHECK-NEXT:    ret <2 x i32> [[SHL]]
+;
+  %or = or <2 x i32> %b, <i32 32, i32 64>
+  %shl = shl <2 x i32> %a, %or
+  ret <2 x i32> %shl
+}
+
+define <2 x i32> @lshr_vector_zero(<2 x i32> %a, <2 x i32> %b) {
+; CHECK-LABEL: @lshr_vector_zero(
+; CHECK-NEXT:    ret <2 x i32> %a
+;
+  %and = and <2 x i32> %b, <i32 64, i32 256>
+  %shr = lshr <2 x i32> %a, %and
+  ret <2 x i32> %shr
+}
+
+; Make sure that weird vector types work too.
+define <2 x i15> @shl_vector_zero(<2 x i15> %a, <2 x i15> %b) {
+; CHECK-LABEL: @shl_vector_zero(
+; CHECK-NEXT:    ret <2 x i15> %a
+;
+  %and = and <2 x i15> %b, <i15 1024, i15 1024>
+  %shl = shl <2 x i15> %a, %and
+  ret <2 x i15> %shl
+}
+
+define <2 x i32> @shl_vector_for_real(<2 x i32> %a, <2 x i32> %b) {
+; CHECK-LABEL: @shl_vector_for_real(
+; CHECK-NEXT:    [[AND:%.*]] = and <2 x i32> %b, <i32 3, i32 3>
+; CHECK-NEXT:    [[SHL:%.*]] = shl <2 x i32> %a, [[AND]]
+; CHECK-NEXT:    ret <2 x i32> [[SHL]]
+;
+  %and = and <2 x i32> %b, <i32 3, i32 3> ; a necessary mask op
+  %shl = shl <2 x i32> %a, %and
+  ret <2 x i32> %shl
+}
+
+
+; We calculate the valid bits of the shift using log2, and log2 of 1 (the type width) is 0.
+; That should be ok. Either the shift amount is 0 or invalid (1), so we can always return %a.
+
+define i1 @shl_i1(i1 %a, i1 %b) {
+; CHECK-LABEL: @shl_i1(
+; CHECK-NEXT:    ret i1 %a
+;
+  %shl = shl i1 %a, %b
+  ret i1 %shl
+}
+
+; Simplify count leading/trailing zeros to zero if all valid bits are shifted out.
+
+declare i32 @llvm.cttz.i32(i32, i1) nounwind readnone
+declare i32 @llvm.ctlz.i32(i32, i1) nounwind readnone
+declare <2 x i8> @llvm.cttz.v2i8(<2 x i8>, i1) nounwind readnone
+declare <2 x i8> @llvm.ctlz.v2i8(<2 x i8>, i1) nounwind readnone
+
+define i32 @lshr_ctlz_zero_is_undef(i32 %x) {
+; CHECK-LABEL: @lshr_ctlz_zero_is_undef(
+; CHECK-NEXT:    ret i32 0
+;
+  %ct = call i32 @llvm.ctlz.i32(i32 %x, i1 true)
+  %sh = lshr i32 %ct, 5
+  ret i32 %sh
+}
+
+define i32 @lshr_cttz_zero_is_undef(i32 %x) {
+; CHECK-LABEL: @lshr_cttz_zero_is_undef(
+; CHECK-NEXT:    ret i32 0
+;
+  %ct = call i32 @llvm.cttz.i32(i32 %x, i1 true)
+  %sh = lshr i32 %ct, 5
+  ret i32 %sh
+}
+
+define <2 x i8> @lshr_ctlz_zero_is_undef_splat_vec(<2 x i8> %x) {
+; CHECK-LABEL: @lshr_ctlz_zero_is_undef_splat_vec(
+; CHECK-NEXT:    ret <2 x i8> zeroinitializer
+;
+  %ct = call <2 x i8> @llvm.ctlz.v2i8(<2 x i8> %x, i1 true)
+  %sh = lshr <2 x i8> %ct, <i8 3, i8 3>
+  ret <2 x i8> %sh
+}
+
+define <2 x i8> @lshr_cttz_zero_is_undef_splat_vec(<2 x i8> %x) {
+; CHECK-LABEL: @lshr_cttz_zero_is_undef_splat_vec(
+; CHECK-NEXT:    ret <2 x i8> zeroinitializer
+;
+  %ct = call <2 x i8> @llvm.cttz.v2i8(<2 x i8> %x, i1 true)
+  %sh = lshr <2 x i8> %ct, <i8 3, i8 3>
+  ret <2 x i8> %sh
+}
+