summaryrefslogtreecommitdiffstats
path: root/board/technexion/imx7dpico/patches/linux/0001-ARM-dts-imx7d-pico-Add-initial-support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'board/technexion/imx7dpico/patches/linux/0001-ARM-dts-imx7d-pico-Add-initial-support.patch')
-rw-r--r--board/technexion/imx7dpico/patches/linux/0001-ARM-dts-imx7d-pico-Add-initial-support.patch430
1 files changed, 430 insertions, 0 deletions
diff --git a/board/technexion/imx7dpico/patches/linux/0001-ARM-dts-imx7d-pico-Add-initial-support.patch b/board/technexion/imx7dpico/patches/linux/0001-ARM-dts-imx7d-pico-Add-initial-support.patch
new file mode 100644
index 0000000000..f2f3561d3f
--- /dev/null
+++ b/board/technexion/imx7dpico/patches/linux/0001-ARM-dts-imx7d-pico-Add-initial-support.patch
@@ -0,0 +1,430 @@
+From 23c787a99ff7b42f594722d60ea064534fe54a71 Mon Sep 17 00:00:00 2001
+From: Vanessa Maegima <vanessa.maegima@nxp.com>
+Date: Wed, 17 May 2017 14:06:36 -0300
+Subject: [PATCH] ARM: dts: imx7d-pico: Add initial support
+
+Add the initial support for imx7d-pico board.
+
+Add support for eMMC, USB host, USB device, PMIC, Ethernet and audio.
+
+For more information about this board, please visit:
+http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc
+
+Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
+Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
+Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+Upstream: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=23c787a99ff7b42f594722d60ea064534fe54a71
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/imx7d-pico.dts | 387 +++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 388 insertions(+)
+ create mode 100644 arch/arm/boot/dts/imx7d-pico.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 7881aae..cc12670 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -478,6 +478,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
+ imx7d-cl-som-imx7.dtb \
+ imx7d-colibri-eval-v3.dtb \
+ imx7d-nitrogen7.dtb \
++ imx7d-pico.dtb \
+ imx7d-sbc-imx7.dtb \
+ imx7d-sdb.dtb \
+ imx7d-sdb-sht11.dtb \
+diff --git a/arch/arm/boot/dts/imx7d-pico.dts b/arch/arm/boot/dts/imx7d-pico.dts
+new file mode 100644
+index 0000000..ebda3df
+--- /dev/null
++++ b/arch/arm/boot/dts/imx7d-pico.dts
+@@ -0,0 +1,387 @@
++/*
++ * Copyright 2017 NXP
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This file is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++
++#include "imx7d.dtsi"
++
++/ {
++ model = "Technexion Pico i.MX7D Board";
++ compatible = "technexion,imx7d-pico", "fsl,imx7d";
++
++ memory {
++ reg = <0x80000000 0x80000000>;
++ };
++
++ reg_2p5v: regulator-2p5v {
++ compatible = "regulator-fixed";
++ regulator-name = "2P5V";
++ regulator-min-microvolt = <2500000>;
++ regulator-max-microvolt = <2500000>;
++ regulator-always-on;
++ };
++
++ reg_3p3v: regulator-3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "3P3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_otg1_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
++ };
++
++ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
++ compatible = "regulator-fixed";
++ regulator-name = "usb_otg2_vbus";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ };
++
++ reg_vref_1v8: regulator-vref-1v8 {
++ compatible = "regulator-fixed";
++ regulator-name = "vref-1v8";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ };
++
++ sound {
++ compatible = "simple-audio-card";
++ simple-audio-card,name = "imx7-sgtl5000";
++ simple-audio-card,format = "i2s";
++ simple-audio-card,bitclock-master = <&dailink_master>;
++ simple-audio-card,frame-master = <&dailink_master>;
++ simple-audio-card,cpu {
++ sound-dai = <&sai1>;
++ };
++
++ dailink_master: simple-audio-card,codec {
++ sound-dai = <&codec>;
++ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
++ };
++ };
++};
++
++&fec1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_enet1>;
++ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
++ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
++ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
++ assigned-clock-rates = <0>, <100000000>;
++ phy-mode = "rgmii";
++ phy-handle = <&ethphy0>;
++ fsl,magic-packet;
++ status = "okay";
++
++ mdio {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ ethphy0: ethernet-phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <1>;
++ status = "okay";
++ };
++ };
++};
++
++&i2c1 {
++ clock-frequency = <100000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c1>;
++ status = "okay";
++
++ codec: sgtl5000@0a {
++ #sound-dai-cells = <0>;
++ reg = <0x0a>;
++ compatible = "fsl,sgtl5000";
++ clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
++ VDDA-supply = <&reg_2p5v>;
++ VDDIO-supply = <&reg_vref_1v8>;
++ };
++};
++
++&i2c4 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c4>;
++ status = "okay";
++
++ pmic: pfuze3000@08 {
++ compatible = "fsl,pfuze3000";
++ reg = <0x08>;
++
++ regulators {
++ sw1a_reg: sw1a {
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
++ };
++ /* use sw1c_reg to align with pfuze100/pfuze200 */
++ sw1c_reg: sw1b {
++ regulator-min-microvolt = <700000>;
++ regulator-max-microvolt = <1475000>;
++ regulator-boot-on;
++ regulator-always-on;
++ regulator-ramp-delay = <6250>;
++ };
++
++ sw2_reg: sw2 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1850000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sw3a_reg: sw3 {
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <1650000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ swbst_reg: swbst {
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5150000>;
++ };
++
++ snvs_reg: vsnvs {
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vref_reg: vrefddr {
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vgen1_reg: vldo1 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen2_reg: vldo2 {
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1550000>;
++ };
++
++ vgen3_reg: vccsd {
++ regulator-min-microvolt = <2850000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen4_reg: v33 {
++ regulator-min-microvolt = <2850000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen5_reg: vldo3 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ vgen6_reg: vldo4 {
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++ };
++ };
++};
++
++&sai1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_sai1>;
++ assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
++ <&clks IMX7D_SAI1_ROOT_CLK>;
++ assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
++ assigned-clock-rates = <0>, <24576000>;
++ status = "okay";
++};
++
++&uart5 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_uart5>;
++ assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
++ assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
++ status = "okay";
++};
++
++&usbotg1 {
++ vbus-supply = <&reg_usb_otg1_vbus>;
++ status = "okay";
++};
++
++&usbotg2 {
++ vbus-supply = <&reg_usb_otg2_vbus>;
++ dr_mode = "host";
++ status = "okay";
++};
++
++&usdhc3 {
++ pinctrl-names = "default", "state_100mhz", "state_200mhz";
++ pinctrl-0 = <&pinctrl_usdhc3>;
++ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
++ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
++ assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
++ assigned-clock-rates = <400000000>;
++ bus-width = <8>;
++ fsl,tuning-step = <2>;
++ non-removable;
++ status = "okay";
++};
++
++&iomuxc {
++ pinctrl_enet1: enet1grp {
++ fsl,pins = <
++ MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
++ MX7D_PAD_SD2_WP__ENET1_MDC 0x3
++ MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1
++ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1
++ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1
++ MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1
++ MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1
++ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1
++ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1
++ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1
++ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1
++ MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1
++ MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1
++ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1
++ >;
++ };
++
++ pinctrl_i2c1: i2c1grp {
++ fsl,pins = <
++ MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x4000007f
++ MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x4000007f
++ >;
++ };
++
++ pinctrl_i2c4: i2c4grp {
++ fsl,pins = <
++ MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f
++ MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f
++ >;
++ };
++
++ pinctrl_sai1: sai1grp {
++ fsl,pins = <
++ MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
++ MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x1f
++ MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
++ MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
++ >;
++ };
++
++ pinctrl_uart5: uart5grp {
++ fsl,pins = <
++ MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x79
++ MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x79
++ >;
++ };
++
++ pinctrl_usbotg1_pwr: usbotg_pwr {
++ fsl,pins = <
++ MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x14
++ >;
++ };
++
++ pinctrl_usdhc3: usdhc3grp {
++ fsl,pins = <
++ MX7D_PAD_SD3_CMD__SD3_CMD 0x59
++ MX7D_PAD_SD3_CLK__SD3_CLK 0x19
++ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
++ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
++ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
++ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
++ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
++ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
++ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
++ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
++ >;
++ };
++
++ pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
++ fsl,pins = <
++ MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
++ MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
++ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
++ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
++ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
++ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
++ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
++ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
++ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
++ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
++ >;
++ };
++
++ pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
++ fsl,pins = <
++ MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
++ MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
++ MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
++ MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
++ MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
++ MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
++ MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
++ MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
++ MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
++ MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
++ >;
++ };
++};
+--
+2.7.4
+
OpenPOWER on IntegriCloud