4 files changed, 0 insertions, 89 deletions
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 808d66c156..4cdaa09da5 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -214,7 +214,6 @@ raspberrypi3_64_defconfig: *defconfig
 raspberrypi3_defconfig: *defconfig
 raspberrypi3_qt5we_defconfig: *defconfig
 raspberrypi_defconfig: *defconfig
-riotboard_defconfig: *defconfig
 roseapplepi_defconfig: *defconfig
 s6lx9_microboard_defconfig: *defconfig
 sheevaplug_defconfig: *defconfig
diff --git a/board/embest/riotboard/readme.txt b/board/embest/riotboard/readme.txt
deleted file mode 100644
index b7390d0d57..0000000000
--- a/board/embest/riotboard/readme.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Buildroot for Embest RIoTboard
-==============================
-
-1. Compiling buildroot
-----------------------
-
-make riotboard_defconfig
-make
-
-2. Installing buildroot
------------------------
-
-Prepare an SD-card and plug it into your card reader. Write the bootloader to
-your SD-card:
-
-sudo dd if=output/images/u-boot.imx of=/dev/sdX bs=1k seek=1
-
-Create 1 partition on the SD-card using your favourite tool. The
-partition should be big enough to hold your rootfs, for example
-128MiB. Here's an example partition layout:
-
-   Device Boot      Start         End      Blocks   Id  System
-/dev/sdX1            2048      264191      131072   83  Linux
-
-Format the SD-card partition with your favourite filesystem:
-
-sudo mkfs.ext2 /dev/sdX1
-
-Deploy your rootfs to the SD-card:
-
-sudo mkdir /mnt/sdcard/
-sudo mount /dev/sdX1 /mnt/sdcard/
-sudo tar xf output/images/rootfs.tar -C /mnt/sdcard/
-sudo umount /dev/sdX1
-
-3. Running buildroot
---------------------
-
-Position the board so you can read the label "RIoTboard" on the right side of
-SW1 DIP switches. Configure the SW1 swiches like this:
-
-10100101 (1 means ON position, 0 means OFF position)
-
-Now plug your prepared SD-card in slot J6. Connect a serial console (115200, 8,
-N, 1) to header J18. Connect a 5V/1A power supply to the board and enjoy your
-new toy.
diff --git a/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf b/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf
deleted file mode 100644
index c7d32e0097..0000000000
--- a/board/embest/riotboard/rootfs_overlay/boot/extlinux/extlinux.conf
+++ /dev/null
@@ -1,6 +0,0 @@
-default buildroot
-
-label buildroot
-kernel /boot/uImage
-devicetree /boot/imx6dl-riotboard.dtb
-append console=ttymxc1,115200 root=/dev/mmcblk0p1 rw
diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig
deleted file mode 100644
index c2281058f5..0000000000
--- a/configs/riotboard_defconfig
+++ /dev/null
@@ -1,36 +0,0 @@
-# architecture
-BR2_arm=y
-BR2_cortex_a9=y
-BR2_ARM_ENABLE_NEON=y
-BR2_ARM_ENABLE_VFP=y
-BR2_ARM_FPU_VFPV3=y
-
-# system
-BR2_TARGET_GENERIC_GETTY=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
-
-# rootfs
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_2r1=y
-BR2_ROOTFS_OVERLAY="board/embest/riotboard/rootfs_overlay"
-
-# bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2015.10"
-BR2_TARGET_UBOOT_BOARDNAME="riotboard"
-BR2_TARGET_UBOOT_FORMAT_IMX=y
-
-# Linux headers same as kernel, a 4.2 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_2=y
-
-# kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.2.6"
-BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
-BR2_LINUX_KERNEL_UIMAGE=y
-BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-riotboard"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y