diff options
| -rw-r--r-- | board/acmesystems/aria-g25/genimage.cfg | 35 | ||||
| -rwxr-xr-x | board/acmesystems/aria-g25/post-image.sh | 14 | ||||
| -rw-r--r-- | board/acmesystems/aria-g25/readme.txt | 59 | ||||
| -rw-r--r-- | configs/acmesystems_aria_g25_128mb_defconfig | 30 | ||||
| -rw-r--r-- | configs/acmesystems_aria_g25_256mb_defconfig | 30 |
5 files changed, 121 insertions, 47 deletions
diff --git a/board/acmesystems/aria-g25/genimage.cfg b/board/acmesystems/aria-g25/genimage.cfg new file mode 100644 index 0000000000..2e2eb129aa --- /dev/null +++ b/board/acmesystems/aria-g25/genimage.cfg @@ -0,0 +1,35 @@ +# Minimal SD card image for the Acmesystems Aria G25 + +image boot.vfat { + vfat { + file zImage { + image = "zImage" + } + + file at91-ariag25.dtb { + image = "at91-ariag25.dtb" + } + + file boot.bin { + image = "at91sam9x5_aria-sdcardboot-linux-zimage-dt-3.8.6.bin" + } + } + size = 16M +} + +image sdcard.img { + hdimage { + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + size = 512M + } +} diff --git a/board/acmesystems/aria-g25/post-image.sh b/board/acmesystems/aria-g25/post-image.sh new file mode 100755 index 0000000000..2846f56d72 --- /dev/null +++ b/board/acmesystems/aria-g25/post-image.sh @@ -0,0 +1,14 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" +GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" +GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" + +rm -rf "${GENIMAGE_TMP}" + +genimage \ + --rootpath "${TARGET_DIR}" \ + --tmppath "${GENIMAGE_TMP}" \ + --inputpath "${BINARIES_DIR}" \ + --outputpath "${BINARIES_DIR}" \ + --config "${GENIMAGE_CFG}" diff --git a/board/acmesystems/aria-g25/readme.txt b/board/acmesystems/aria-g25/readme.txt index 734ccd2df5..cb9e9abf77 100644 --- a/board/acmesystems/aria-g25/readme.txt +++ b/board/acmesystems/aria-g25/readme.txt @@ -1,51 +1,44 @@ +Acme Systems Aria G25 + Build instructions ================== -As a regular user configure and then build: - -$ make acmesystems_aria_g25_128mb_defconfig (128MB RAM variant) - or... -$ make acmesystems_aria_g25_256mb_defconfig (256MB RAM variant) +To build an image for the Aria G25 choose the configuration +corresponding to the Aria variant. -$ make +For 128MB RAM variant type: -Writing to the MicroSD card -=========================== +$ make acmesystems_aria_g25_128mb_defconfig -Assuming your Aria G25 baseboard has a MicroSD socket, for example with -the Terra baseboard, you'll need a blank MicroSD (obviously) initialized -in a particular way to be able to boot from it. +else for 256MB RAM variant type: -Assuming the card is seen as /dev/sdb in your PC/laptop/other device -you'll need to run the following commands as root or via sudo. +$ make acmesystems_aria_g25_256mb_defconfig -Make sure all of the card partitions are unmounted before starting. +To customize the configuration choosed type: -First we'll need to create two partitions: +$ make menuconfig -# sfdisk -uM /dev/sdb <<EOF -,32,6 -; -EOF +When you are ready to start building Buildroot type: -Then we'll need to create the empty filesystems: +$ make -# mkdosfs -n SD_BOOT /dev/sdb1 -# mkfs.ext4 -L SD_ROOT /dev/sdb2 +How to write the microSD card +============================= -We'll populate the first partition (boot) with the relevant files: +Once the build process is finished you will have an image called +"sdcard.img" in the output/images/ directory. -# mount /dev/sdb1 /mnt -# cp output/images/at91bootstrap.bin /mnt/BOOT.BIN -# cp output/images/zImage /mnt -# cp output/images/at91-ariag25.dtb /mnt -# umount /mnt +Write the bootable SD card image "sdcard.img" onto an SD card with +"dd" command: -And the root filesystem afterwards: + $ sudo dd if=output/images/sdcard.img of=/dev/sdX -# mount /dev/sdb2 /mnt -# tar -C /mnt output/images/rootfs.tar -# umount /mnt +Assuming your Aria G25 baseboard has a MicroSD socket, for example +with the Terra baseboard, insert the microSD card into the baseboard +slot and power it. -You're done, insert the MicroSD card in the slot and enjoy. +To get the kernel log messages you can use a DPI cable +(http://www.acmesystems.it/DPI) +You can find additional informations, tutorials and a very +comprehensive documentation on http://www.acmesystems.it/aria. diff --git a/configs/acmesystems_aria_g25_128mb_defconfig b/configs/acmesystems_aria_g25_128mb_defconfig index c4d2cd681e..0ec210f33e 100644 --- a/configs/acmesystems_aria_g25_128mb_defconfig +++ b/configs/acmesystems_aria_g25_128mb_defconfig @@ -1,20 +1,36 @@ # Architecture BR2_arm=y -# Linux headers same as kernel, a 4.1 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y +# Kernel headers +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y -# Kernel +# System configuration +BR2_TARGET_GENERIC_ISSUE="Welcome to Aria-G25 Buildroot" +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" +BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/aria-g25/post-image.sh" + +# Kernel configuration BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7.4" BR2_LINUX_KERNEL_DEFCONFIG="at91_dt" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25" -# Bootloader +# Root filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_LABEL="rootfs" + +# AT91bootstrap bootloader BR2_TARGET_AT91BOOTSTRAP3=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/tanzilli/at91bootstrap.git" -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="3f957cec253abc80fd10c733e5e596f46e1aef56" +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.6" BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="aria-128m" + +# Tools to build sdcard.img +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y diff --git a/configs/acmesystems_aria_g25_256mb_defconfig b/configs/acmesystems_aria_g25_256mb_defconfig index ba191c654f..a480287cef 100644 --- a/configs/acmesystems_aria_g25_256mb_defconfig +++ b/configs/acmesystems_aria_g25_256mb_defconfig @@ -1,20 +1,36 @@ # Architecture BR2_arm=y -# Linux headers same as kernel, a 4.1 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y +# Kernel headers +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y -# Kernel +# System configuration +BR2_TARGET_GENERIC_ISSUE="Welcome to Aria-G25 Buildroot" +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" +BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/aria-g25/post-image.sh" + +# Kernel configuration BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7.4" BR2_LINUX_KERNEL_DEFCONFIG="at91_dt" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25" -# Bootloader +# Root filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_LABEL="rootfs" + +# AT91bootstrap bootloader BR2_TARGET_AT91BOOTSTRAP3=y BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/tanzilli/at91bootstrap.git" -BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="3f957cec253abc80fd10c733e5e596f46e1aef56" +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git" +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.6" BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="aria-256m" + +# Tools to build sdcard.img +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y |
