From 2e2fb4dfff5cae3a6a8f4bf21c414e7efc8b5e61 Mon Sep 17 00:00:00 2001 From: Frederic Bonnard Date: Mon, 22 Jun 2015 13:12:45 +0200 Subject: Renaming to opal-gard and minus escaping The binary installed is opal-gard so renaming all occurences of 'gard' else distro package checkers complain. Minus for options should be escaped, else this is considered as hyphens. Signed-off-by: Frederic Bonnard Signed-off-by: Stewart Smith --- external/gard/opal-gard.1 | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 external/gard/opal-gard.1 (limited to 'external/gard/opal-gard.1') diff --git a/external/gard/opal-gard.1 b/external/gard/opal-gard.1 new file mode 100644 index 00000000..65b21447 --- /dev/null +++ b/external/gard/opal-gard.1 @@ -0,0 +1,30 @@ +.TH opal-gard 1 "19 June 2015" +.SH NAME +opal-gard \- GUARD Partition manipulation tool for OpenPower hardware +.SH SYNOPSIS +\fBopal-gard\fP [ \-e | \-f \fIfile\fP | \-p ] +\fIcommand\fP +.SH DESCRIPTION +\fBopal-gard\fP allows reading of the GUARD partition on OpenPower hardware though the exposed mtd flash interface. The actual device (usually \fB/dev/mtd0\fR) is automatically detected. +.SS Options +\fB\-e, \-\-ecc\fP +Force reading/writing with ECC bytes. +.TP +\fB\-f, \-\-file\fP \fIfile\fR +Don't search for the \fB/dev/mtd\fR device, use \fIfile\fP instead. +.TP +.TP +\fB\-p, \-\-part\fP +Used in conjunction with \-f to specify that just the GUARD partition is in the \fIfile\fR and that libffs shouldn't be used. +.SS Commands +\fIcommand\fP +may be one of the following +.TP +\fBlist\fP +List current GARD records +.TP +\fBshow\fP +Show details of a GARD record +.TP +\fBclear\fP +Clear GARD records -- cgit v1.2.1