RC_P9_RAS_STATUS_ERR Procedure: p9_sbe_check_quiesce RAS Status is not in the STOP state TARGET RASSTATUS RC_P9_CAPP_QUIESCE_TIMEOUT Procedure: p9_sbe_check_quiesce CAPP quiesce done bit is not set TARGET DATA RC_P9_NTL_NOT_IN_RESET Procedure: p9_sbe_check_quiesce The NTLs are not all in the reset state for the NPU TARGET NTL_DATA0 NTL_DATA1 NTL_DATA2 NTL_DATA3 NTL_DATA4 NTL_DATA5 RC_P9_VAS_QUIESCE_TIMEOUT Procedure: p9_sbe_check_quiesce The VAS quiesce was not achieved TARGET NORTHDATA SOUTHDATA RC_P9_NX_PBI_WRITE_IDLE_TIMEOUT Procedure: p9_sbe_check_quiesce The PBI Write Idle never happened TARGET DATA RC_P9_NX_CRB_KILL_DONE_TIMEOUT Procedure: p9_sbe_check_quiesce CRB kills were not complete TARGET DATA RC_P9_NX_STOP_UMAC_FETCHING_NEW_CRBS_TIMEOUT Procedure: p9_sbe_check_quiesce UMAC was not stopped from fetchihng new CRBs TARGET DATA RC_P9_NX_UMAC_DISPATCH_SLOTS_TO_DRAIN_CRBS_TIMEOUT Procedure: p9_sbe_check_quiesce UMAC was not done dispatching slots to drain of CRBs TARGET DATA RC_P9_WAIT_FOR_DMA_CHANNELS_TO_DRAIN_TIMEOUT Procedure: p9_sbe_check_quiesce DMA channels were not drained TARGET DATA RC_P9_WAIT_FOR_ERAT_IDLE Procedure: p9_sbe_check_quiesce ERAT was not idle TARGET DATA RC_P9_PBI_MASTER_MACHINES_IDLE_TIMEOUT Procedure: p9_sbe_check_quiesce PBI Master machines are not idle TARGET DATA RC_P9_UMAC_QUIESCE_FAILED Procedure: p9_sbe_check_quiesce UMAC status control quiesce failed TARGET DATA RC_P9_UMAC_QUIESCE_TIMEOUT Procedure: p9_sbe_check_quiesce UMAC status control quiesce timed out TARGET DATA RC_P9_PSIHBCR_INBOUND_QUEUE_NOT_EMPTY Procedure: p9_sbe_check_quiesce PSIHBCR inbound queue not empty TARGET DATA RC_P9_INTP_QUIESCE_TIMEOUT Procedure: p9_sbe_check_quiesce INTP master or slave is not idle TARGET DATA RC_P9_CHECK_XSTOP Procedure: p9_sbe_check_quiesce If we hit a checkstop add the value of register 0x570F001C If there is an error with setting the checkstop the value here will be 0xDEADBEEFDEADBEEF CHECKSTOP_DATA