From 5e83bcb5cf9d400739cfb2beaab1a3173e8cafb2 Mon Sep 17 00:00:00 2001 From: Shakeeb Date: Thu, 1 Sep 2016 06:24:44 -0500 Subject: SBE move import` Change-Id: I726951318cdb19fd445af2f7910e0d6872eff18c Reviewed-on: http://ralgit01.raleigh.ibm.com/gerrit1/29086 Tested-by: Jenkins Server Reviewed-by: Sachin Gupta Reviewed-by: AMIT J. TENDOLKAR --- .../p9/procedures/hwp/perv/p9_sbe_setup_evid.H | 65 ++++++++++++++++++++++ 1 file changed, 65 insertions(+) create mode 100644 src/import/chips/p9/procedures/hwp/perv/p9_sbe_setup_evid.H (limited to 'src/import/chips/p9/procedures/hwp/perv/p9_sbe_setup_evid.H') diff --git a/src/import/chips/p9/procedures/hwp/perv/p9_sbe_setup_evid.H b/src/import/chips/p9/procedures/hwp/perv/p9_sbe_setup_evid.H new file mode 100644 index 00000000..a1ab2263 --- /dev/null +++ b/src/import/chips/p9/procedures/hwp/perv/p9_sbe_setup_evid.H @@ -0,0 +1,65 @@ +/* IBM_PROLOG_BEGIN_TAG */ +/* This is an automatically generated prolog. */ +/* */ +/* $Source: import/chips/p9/procedures/hwp/perv/p9_sbe_setup_evid.H $ */ +/* */ +/* OpenPOWER sbe Project */ +/* */ +/* Contributors Listed Below - COPYRIGHT 2015,2016 */ +/* [+] International Business Machines Corp. */ +/* */ +/* */ +/* Licensed under the Apache License, Version 2.0 (the "License"); */ +/* you may not use this file except in compliance with the License. */ +/* You may obtain a copy of the License at */ +/* */ +/* http://www.apache.org/licenses/LICENSE-2.0 */ +/* */ +/* Unless required by applicable law or agreed to in writing, software */ +/* distributed under the License is distributed on an "AS IS" BASIS, */ +/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or */ +/* implied. See the License for the specific language governing */ +/* permissions and limitations under the License. */ +/* */ +/* IBM_PROLOG_END_TAG */ +/// +/// @file p9_sbe_setup_evid.H +/// @brief Setup External Voltage IDs and Boot Frequency +/// +/// *HW Owner : Greg Still +/// *FW Owner : Sangeetha T S +/// *Team : PM +/// *Consumed by : SBE +/// *Level : 1 +/// + +#ifndef __P9_SBE_SETUP_EVID_H__ +#define __P9_SBE_SETUP_EVID_H__ + +extern "C" +{ + +/// @typedef p9_sbe_setup_evid_FP_t +/// function pointer typedef definition for HWP call support + typedef fapi2::ReturnCode (*p9_sbe_setup_evid_FP_t) ( + const fapi2::Target&); + +/// @brief Read attributes containing this part's boot voltages (VDD, VCS and VDN) +/// and set these voltage using the AVSBUS interface (VDD, VCS) an I2C (VDN). +/// Also reads a differnt attribute containing the boot frequency and set that +/// into each configured EQ chiplet. +/// @param [in] i_target TARGET_TYPE_PROC_CHIP +/// @attr +/// @attritem ATTR_BOOT_FREQ uint16_t - 9 bit frequency multiplier of the refclk right justified +/// @attritem ATTR_VCS_BOOT_VOLTAGE uint16_t - 1mV grandularity setting for the VCS rail +/// @attritem ATTR_VDD_BOOT_VOLTAGE uint16_t - 1mV grandularity setting for the VDD rail +/// @attritem ATTR_VDN_BOOT_VOLTAGE uint16_t - 1mV grandularity setting for the VDN rail +/// +/// @retval FAPI_RC_SUCCESS + fapi2::ReturnCode + p9_sbe_setup_evid(const fapi2::Target& i_target); + + +} // extern C + +#endif // __P9_SBE_SETUP_EVID_H__ -- cgit v1.2.1