diff options
Diffstat (limited to 'src/test/testcases/testPSUSetStashPair.py')
| -rw-r--r-- | src/test/testcases/testPSUSetStashPair.py | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/src/test/testcases/testPSUSetStashPair.py b/src/test/testcases/testPSUSetStashPair.py new file mode 100644 index 00000000..378b101c --- /dev/null +++ b/src/test/testcases/testPSUSetStashPair.py @@ -0,0 +1,276 @@ +# IBM_PROLOG_BEGIN_TAG +# This is an automatically generated prolog. +# +# $Source: src/test/testcases/testPSUSetStashPair.py $ +# +# OpenPOWER sbe Project +# +# Contributors Listed Below - COPYRIGHT 2017 +# +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or +# implied. See the License for the specific language governing +# permissions and limitations under the License. +# +# IBM_PROLOG_END_TAG + +import sys +import os +import struct +sys.path.append("targets/p9_nimbus/sbeTest" ) +import testPSUUtil +import testRegistry as reg +import testUtil + +#------------------------------- +# This is a Test Expected Data +#------------------------------- +''' +This data are the values or strings that needs to be validated for the test. +''' +''' +#------------------------------------------------------------------------------------------------------------------------------ +# SBE side test data - +#------------------------------------------------------------------------------------------------------------------------------ +''' +sbe_test_data1 = ( + #----------------------------------------------------------------------------------------------------- + # OP Reg ValueToWrite size Test Expected Data Description + #----------------------------------------------------------------------------------------------------- + # Stash CMD + ["write", reg.REG_MBOX0, "0000010000F0D707", 8, "None", "Writing to MBOX0 address"], + # Stash CMD key + ["write", reg.REG_MBOX1, "0000000000000001", 8, "None", "Writing to MBOX1 address"], + # Stash Addr + ["write", reg.REG_MBOX2, "AAAAAAAAAAAAAAAA", 8, "None", "Writing to MBOX2 address"], + ["write", reg.PSU_SBE_DOORBELL_REG_WO_OR, "8000000000000000", 8, "None", "Update SBE Doorbell register to interrupt SBE"], + ) +''' +''' +sbe_test_data2 = ( + #----------------------------------------------------------------------------------------------------- + # OP Reg ValueToWrite size Test Expected Data Description + #----------------------------------------------------------------------------------------------------- + # Stash CMD + ["write", reg.REG_MBOX0, "0000010000F0D707", 8, "None", "Writing to MBOX0 address"], + # Stash CMD key + ["write", reg.REG_MBOX1, "0000000000000002", 8, "None", "Writing to MBOX1 address"], + # Stash Addr + ["write", reg.REG_MBOX2, "BBBBBBBBBBBBBBBB", 8, "None", "Writing to MBOX2 address"], + ["write", reg.PSU_SBE_DOORBELL_REG_WO_OR, "8000000000000000", 8, "None", "Update SBE Doorbell register to interrupt SBE"], + ) +''' +''' +sbe_test_data3 = ( + #----------------------------------------------------------------------------------------------------- + # OP Reg ValueToWrite size Test Expected Data Description + #----------------------------------------------------------------------------------------------------- + # Stash CMD + ["write", reg.REG_MBOX0, "0000010000F0D707", 8, "None", "Writing to MBOX0 address"], + # Stash CMD key + ["write", reg.REG_MBOX1, "0000000000000003", 8, "None", "Writing to MBOX1 address"], + # Stash Addr + ["write", reg.REG_MBOX2, "CCCCCCCCCCCCCCCC", 8, "None", "Writing to MBOX2 address"], + ["write", reg.PSU_SBE_DOORBELL_REG_WO_OR, "8000000000000000", 8, "None", "Update SBE Doorbell register to interrupt SBE"], + ) +''' +''' +sbe_test_data4 = ( + #----------------------------------------------------------------------------------------------------- + # OP Reg ValueToWrite size Test Expected Data Description + #----------------------------------------------------------------------------------------------------- + # Stash CMD + ["write", reg.REG_MBOX0, "0000010000F0D707", 8, "None", "Writing to MBOX0 address"], + # Stash CMD key + ["write", reg.REG_MBOX1, "0000000000000004", 8, "None", "Writing to MBOX1 address"], + # Stash Addr + ["write", reg.REG_MBOX2, "DDDDDDDDDDDDDDDD", 8, "None", "Writing to MBOX2 address"], + ["write", reg.PSU_SBE_DOORBELL_REG_WO_OR, "8000000000000000", 8, "None", "Update SBE Doorbell register to interrupt SBE"], + ) +''' +''' +sbe_test_data5 = ( + #----------------------------------------------------------------------------------------------------- + # OP Reg ValueToWrite size Test Expected Data Description + #----------------------------------------------------------------------------------------------------- + # Stash CMD + ["write", reg.REG_MBOX0, "0000010000F0D707", 8, "None", "Writing to MBOX0 address"], + # Stash CMD key + ["write", reg.REG_MBOX1, "0000000000000005", 8, "None", "Writing to MBOX1 address"], + # Stash Addr + ["write", reg.REG_MBOX2, "EEEEEEEEEEEEEEEE", 8, "None", "Writing to MBOX2 address"], + ["write", reg.PSU_SBE_DOORBELL_REG_WO_OR, "8000000000000000", 8, "None", "Update SBE Doorbell register to interrupt SBE"], + ) +''' +''' +sbe_test_data6 = ( + #----------------------------------------------------------------------------------------------------- + # OP Reg ValueToWrite size Test Expected Data Description + #----------------------------------------------------------------------------------------------------- + # Stash CMD + ["write", reg.REG_MBOX0, "0000010000F0D707", 8, "None", "Writing to MBOX0 address"], + # Stash CMD key + ["write", reg.REG_MBOX1, "0000000000000006", 8, "None", "Writing to MBOX1 address"], + # Stash Addr + ["write", reg.REG_MBOX2, "FFFFFFFFFFFFFFFF", 8, "None", "Writing to MBOX2 address"], + ["write", reg.PSU_SBE_DOORBELL_REG_WO_OR, "8000000000000000", 8, "None", "Update SBE Doorbell register to interrupt SBE"], + ) +''' +''' +sbe_test_data7 = ( + #----------------------------------------------------------------------------------------------------- + # OP Reg ValueToWrite size Test Expected Data Description + #----------------------------------------------------------------------------------------------------- + # Stash CMD + ["write", reg.REG_MBOX0, "0000010000F0D707", 8, "None", "Writing to MBOX0 address"], + # Stash CMD key + ["write", reg.REG_MBOX1, "0000000000000007", 8, "None", "Writing to MBOX1 address"], + # Stash Addr + ["write", reg.REG_MBOX2, "ABABABABABABABAB", 8, "None", "Writing to MBOX2 address"], + ["write", reg.PSU_SBE_DOORBELL_REG_WO_OR, "8000000000000000", 8, "None", "Update SBE Doorbell register to interrupt SBE"], + ) +''' +''' +sbe_test_data8 = ( + #----------------------------------------------------------------------------------------------------- + # OP Reg ValueToWrite size Test Expected Data Description + #----------------------------------------------------------------------------------------------------- + # Stash CMD + ["write", reg.REG_MBOX0, "0000010000F0D707", 8, "None", "Writing to MBOX0 address"], + # Stash CMD key + ["write", reg.REG_MBOX1, "0000000000000008", 8, "None", "Writing to MBOX1 address"], + # Stash Addr + ["write", reg.REG_MBOX2, "CDCDCDCDCDCDCDCD", 8, "None", "Writing to MBOX2 address"], + ["write", reg.PSU_SBE_DOORBELL_REG_WO_OR, "8000000000000000", 8, "None", "Update SBE Doorbell register to interrupt SBE"], + ) +''' +#--------------------- +# Host side test data - SUCCESS +#--------------------- +''' +host_test_data_success = ( + #---------------------------------------------------------------------------------------------------------------- + # OP Reg ValueToWrite size Test Expected Data Description + #---------------------------------------------------------------------------------------------------------------- + ["read", reg.REG_MBOX4, "0", 8, "0000000000F0D707", "Reading Host MBOX4 data to Validate"], + ) + +''' +#----------------------------------------------------------------------- +# Do not modify - Used to simulate interrupt on Ringing Doorbell on Host +#----------------------------------------------------------------------- +''' +host_polling_data = ( + #---------------------------------------------------------------------------------------------------------------- + # OP Reg ValueToWrite size Test Expected Data Description + #---------------------------------------------------------------------------------------------------------------- + ["read", reg.PSU_HOST_DOORBELL_REG_WO_OR, "0", 8, "8000000000000000", "Reading Host Doorbell for Interrupt"], + ) + +#------------------------- +# Main Function +#------------------------- +def main(): + # Run Simics initially + testUtil.runCycles( 100000000 ); + # Intialize the class obj instances + regObj = testPSUUtil.registry() # Registry obj def for operation + + print "\n Execute SBE Test \n" + # HOST->SBE data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, sbe_test_data1 ) + print "\n Poll on Host side for INTR ...\n" + #Poll on HOST DoorBell Register for interrupt + regObj.pollingOn( testPSUUtil.simSbeObj, host_polling_data, 5 ) + #SBE->HOST data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, host_test_data_success ) + testUtil.runCycles( 10000000 ); + + print "\n Execute SBE Test \n" + # HOST->SBE data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, sbe_test_data2 ) + print "\n Poll on Host side for INTR ...\n" + #Poll on HOST DoorBell Register for interrupt + regObj.pollingOn( testPSUUtil.simSbeObj, host_polling_data, 5 ) + #SBE->HOST data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, host_test_data_success ) + testUtil.runCycles( 10000000 ); + + print "\n Execute SBE Test \n" + # HOST->SBE data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, sbe_test_data3 ) + print "\n Poll on Host side for INTR ...\n" + #Poll on HOST DoorBell Register for interrupt + regObj.pollingOn( testPSUUtil.simSbeObj, host_polling_data, 5 ) + #SBE->HOST data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, host_test_data_success ) + testUtil.runCycles( 10000000 ); + + print "\n Execute SBE Test \n" + # HOST->SBE data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, sbe_test_data4 ) + print "\n Poll on Host side for INTR ...\n" + #Poll on HOST DoorBell Register for interrupt + regObj.pollingOn( testPSUUtil.simSbeObj, host_polling_data, 5 ) + #SBE->HOST data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, host_test_data_success ) + testUtil.runCycles( 10000000 ); + + print "\n Execute SBE Test \n" + # HOST->SBE data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, sbe_test_data5 ) + print "\n Poll on Host side for INTR ...\n" + #Poll on HOST DoorBell Register for interrupt + regObj.pollingOn( testPSUUtil.simSbeObj, host_polling_data, 5 ) + #SBE->HOST data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, host_test_data_success ) + testUtil.runCycles( 10000000 ); + + print "\n Execute SBE Test \n" + # HOST->SBE data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, sbe_test_data6 ) + print "\n Poll on Host side for INTR ...\n" + #Poll on HOST DoorBell Register for interrupt + regObj.pollingOn( testPSUUtil.simSbeObj, host_polling_data, 5 ) + #SBE->HOST data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, host_test_data_success ) + testUtil.runCycles( 10000000 ); + + print "\n Execute SBE Test \n" + # HOST->SBE data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, sbe_test_data7 ) + print "\n Poll on Host side for INTR ...\n" + #Poll on HOST DoorBell Register for interrupt + regObj.pollingOn( testPSUUtil.simSbeObj, host_polling_data, 5 ) + #SBE->HOST data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, host_test_data_success ) + testUtil.runCycles( 10000000 ); + + print "\n Execute SBE Test \n" + # HOST->SBE data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, sbe_test_data8 ) + print "\n Poll on Host side for INTR ...\n" + #Poll on HOST DoorBell Register for interrupt + regObj.pollingOn( testPSUUtil.simSbeObj, host_polling_data, 5 ) + #SBE->HOST data set execution + regObj.ExecuteTestOp( testPSUUtil.simSbeObj, host_test_data_success ) + testUtil.runCycles( 10000000 ); + +if __name__ == "__main__": + main() + if err: + print ( "\nTest Suite completed with error(s)" ) + #sys.exit(1) + else: + print ( "\nTest Suite completed with no errors" ) + #sys.exit(0); + + |
