1 files changed, 0 insertions, 143 deletions
diff --git a/pk/std/std_irq_config.h b/pk/std/std_irq_config.h
deleted file mode 100644
index 1c0326f1..00000000
--- a/pk/std/std_irq_config.h
+++ /dev/null
@@ -1,143 +0,0 @@
-#ifndef __STD_IRQ_CONFIG_H__
-#define __STD_IRQ_CONFIG_H__
-//-----------------------------------------------------------------------------
-// *! (C) Copyright International Business Machines Corp. 2015
-// *! All Rights Reserved -- Property of IBM
-// *! *** IBM Confidential ***
-//-----------------------------------------------------------------------------
-
-/// \file std_irq_config.h
-/// \brief Contains data and macros pertaining to external interrupt
-/// configuration for a standard PPE.
-///
-
-#include "pk_app_cfg.h"
-
-/// This constant is used to define the size of the table of interrupt handler
-/// structures as well as a limit for error checking. 
-#define EXTERNAL_IRQS 64
-
-// Standard interrupt type values (level or edge)
-#define STD_IRQ_TYPE_LEVEL            0
-#define STD_IRQ_TYPE_EDGE             1
-
-// Standard interrupt polarity values (high or low, rising falling)
-#define STD_IRQ_POLARITY_LO           0
-#define STD_IRQ_POLARITY_FALLING      0
-#define STD_IRQ_POLARITY_HI           1
-#define STD_IRQ_POLARITY_RISING       1
-
-// Standard interrupt mask values (masked or enabled)
-#define STD_IRQ_MASKED                0
-#define STD_IRQ_ENABLED               1
-
-// Fail to compile if the application does not define this
-#ifndef APPCFG_EXT_IRQS_CONFIG
-#error "APPCFG_EXT_IRQS_CONFIG must be defined in pk_app_cfg.h"
-#endif
-
-// Fail to compile if the application does not define this
-#ifndef APPCFG_IRQ_INVALID_MASK
-#error "APPCFG_IRQ_INVALID_MASK must be defined in pk_app_cfg.h"
-#endif
-
-#ifndef __ASSEMBLER__
-
-/// This expression recognizes only those IRQ numbers that have named
-/// (non-reserved) interrupts in the standard PPE interrupt controller.
-#define STD_IRQ_VALID(irq) \
-    ({unsigned __irq = (unsigned)(irq);         \
-        ((__irq < EXTERNAL_IRQS) &&             \
-         ((STD_IRQ_MASK64(__irq) &              \
-            APPCFG_IRQ_INVALID_MASK) == 0));})
-
-/// This is a 64-bit mask, with big-endian bit 'irq' set.
-#define STD_IRQ_MASK64(irq) (0x8000000000000000ull >> (irq))
-
-#else
-
-//Untyped assembler version of STD_IRQ_MASK64
-#define STD_IRQ_MASK64(irq) (0x8000000000000000 >> (irq))
-
-#endif  /* __ASSEMBLER__ */
-
-#ifndef __ASSEMBLER__
-/// These globals are statically initialized elsewhere
-extern uint64_t g_ext_irqs_type;
-extern uint64_t g_ext_irqs_valid;
-extern uint64_t g_ext_irqs_polarity;
-extern uint64_t g_ext_irqs_enable;
-#endif
-
-#ifdef __ASSEMBLER__
-/// These macros aid in the initialization of the external interrupt globals.  I would
-/// prefer to use CPP macros, but they don't support recursive macros which I use to
-/// convert the variable number of interrupts that a processor can control into static
-/// bitmaps used by __hwmacro_setup() at runtime.
-
-
-    //helper macro for setting up the irq configuration bitmaps for a standard PPE
-    .macro .std_irq_config irq_num=-1 irq_type=-1 irq_polarity=-1 irq_mask=-1 parms:vararg
-        .if (( \irq_num == -1 ) && ( \irq_type == -1 ) && ( \irq_polarity == -1 ) && ( \irq_mask == -1 ))
-#.if ( .ext_irqs_defd != .ext_irqs_valid )
-#.error "###### .std_irq_config: Missing configuration for one or more interrupts ######"
-#.endif
-
-            .section .sdata
-            .align 3
-            .global g_ext_irqs_type
-            .global g_ext_irqs_polarity
-            .global g_ext_irqs_enable
-            g_ext_irqs_polarity:
-            .quad .ext_irqs_polarity
-            g_ext_irqs_type:
-            .quad .ext_irqs_type
-            g_ext_irqs_enable:
-            .quad .ext_irqs_enable
-        .else
-            .if (( \irq_num < 0 ) || ( \irq_num > (EXTERNAL_IRQS - 1)))
-                .error "###### .std_irq_config: invalid irq number \irq_num ######"
-            .elseif ((.ext_irqs_valid & (1 << ( EXTERNAL_IRQS - 1 - \irq_num ))) == 0 )
-                .error "###### .std_irq_config: Attempt to configure invalid irq number \irq_num ######" 
-            .elseif (.ext_irqs_defd & (1 << ( EXTERNAL_IRQS - 1 - \irq_num )))
-                .error "###### .std_irq_config: duplicate definition for irq \irq_num ######"
-            .else
-                .ext_irqs_defd = .ext_irqs_defd | (1 << ( EXTERNAL_IRQS - 1 - \irq_num ))
-            .endif
-
-            .if (( \irq_type < 0 ) || ( \irq_type > 1 ))
-                .error "###### .std_irq_config: invalid/unspecified irq type \irq_type for irq \irq_num ######" 
-            .else
-                .ext_irqs_type = .ext_irqs_type | ( \irq_type << ( EXTERNAL_IRQS - 1 - \irq_num ))
-            .endif
-
-            .if (( \irq_polarity < 0 ) || ( \irq_polarity > 1 ))
-                .error "###### .std_irq_config: invalid/unspecified irq polarity ( \irq_polarity ) for irq \irq_num ######" 
-            .else
-                .ext_irqs_polarity = .ext_irqs_polarity | ( \irq_polarity << ( EXTERNAL_IRQS - 1 - \irq_num ))
-            .endif
-
-            .if (( \irq_mask < 0 ) || ( \irq_mask > 1 ))
-                .error "###### .std_irq_config: invalid/unspecified irq mask ( \irq_mask ) for irq \irq_num ######" 
-            .else
-                .ext_irqs_enable = .ext_irqs_enable | ( \irq_mask << ( EXTERNAL_IRQS - 1 - \irq_num ))
-            .endif
-
-            .std_irq_config \parms
-        .endif
-    .endm
-
-    //Top level macro for generating interrupt configuration globals for a standard PPE
-    .macro .std_irq_cfg_bitmaps
-        .ext_irqs_valid = ~(APPCFG_IRQ_INVALID_MASK)
-        .ext_irqs_type = 0
-        .ext_irqs_polarity = 0
-        .ext_irqs_enable = 0
-        .irq_mask = 0
-        .ext_irqs_defd = 0
-        .std_irq_config APPCFG_EXT_IRQS_CONFIG
-    .endm
-
-#endif /*__ASSEMBLER__*/
-
-#endif /*__STD_IRQ_CONFIG_H__*/