DESCRIPTION = "Commented config.txt file for the Raspberry Pi. \ The Raspberry Pi config.txt file is read by the GPU before \ the ARM core is initialised. It can be used to set various \ system configuration parameters." LICENSE = "MIT" LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" COMPATIBLE_MACHINE = "^rpi$" SRCREV = "648ffc470824c43eb0d16c485f4c24816b32cd6f" SRC_URI = "git://github.com/Evilpaul/RPi-config.git;protocol=git;branch=master \ " S = "${WORKDIR}/git" PR = "r5" INHIBIT_DEFAULT_DEPS = "1" PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}" PITFT22="${@bb.utils.contains("MACHINE_FEATURES", "pitft22", "1", "0", d)}" PITFT28r="${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "1", "0", d)}" PITFT35r="${@bb.utils.contains("MACHINE_FEATURES", "pitft35r", "1", "0", d)}" VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}" VC4DTBO ?= "vc4-kms-v3d" inherit deploy nopackages do_deploy() { install -d ${DEPLOYDIR}/bcm2835-bootfiles cp ${S}/config.txt ${DEPLOYDIR}/bcm2835-bootfiles/ if [ -n "${KEY_DECODE_MPG2}" ]; then sed -i '/#decode_MPG2=/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${KEY_DECODE_WVC1}" ]; then sed -i '/#decode_WVC1=/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${DISABLE_OVERSCAN}" ]; then sed -i '/#disable_overscan=/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${DISABLE_SPLASH}" ]; then sed -i '/#disable_splash=/ c\disable_splash=${DISABLE_SPLASH}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # Set overclocking options if [ -n "${ARM_FREQ}" ]; then sed -i '/#arm_freq=/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${GPU_FREQ}" ]; then sed -i '/#gpu_freq=/ c\gpu_freq=${GPU_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${CORE_FREQ}" ]; then sed -i '/#core_freq=/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${SDRAM_FREQ}" ]; then sed -i '/#sdram_freq=/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${OVER_VOLTAGE}" ]; then sed -i '/#over_voltage=/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # GPU memory if [ -n "${GPU_MEM}" ]; then sed -i '/#gpu_mem=/ c\gpu_mem=${GPU_MEM}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${GPU_MEM_256}" ]; then sed -i '/#gpu_mem_256=/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${GPU_MEM_512}" ]; then sed -i '/#gpu_mem_512=/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${GPU_MEM_1024}" ]; then sed -i '/#gpu_mem_1024=/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # Set boot delay if [ -n "${BOOT_DELAY}" ]; then sed -i '/#boot_delay=/ c\boot_delay=${BOOT_DELAY}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${BOOT_DELAY_MS}" ]; then sed -i '/#boot_delay_ms=/ c\boot_delay_ms=${BOOT_DELAY_MS}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # Set HDMI and composite video options if [ -n "${HDMI_FORCE_HOTPLUG}" ]; then sed -i '/#hdmi_force_hotplug=/ c\hdmi_force_hotplug=${HDMI_FORCE_HOTPLUG}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${HDMI_DRIVE}" ]; then sed -i '/#hdmi_drive=/ c\hdmi_drive=${HDMI_DRIVE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${HDMI_GROUP}" ]; then sed -i '/#hdmi_group=/ c\hdmi_group=${HDMI_GROUP}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${HDMI_MODE}" ]; then sed -i '/#hdmi_mode=/ c\hdmi_mode=${HDMI_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${CONFIG_HDMI_BOOST}" ]; then sed -i '/#config_hdmi_boost=/ c\config_hdmi_boost=${CONFIG_HDMI_BOOST}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${SDTV_MODE}" ]; then sed -i '/#sdtv_mode=/ c\sdtv_mode=${SDTV_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${SDTV_ASPECT}" ]; then sed -i '/#sdtv_aspect=/ c\sdtv_aspect=${SDTV_ASPECT}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ -n "${DISPLAY_ROTATE}" ]; then sed -i '/#display_rotate=/ c\display_rotate=${DISPLAY_ROTATE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # Video camera support if [ -n "${VIDEO_CAMERA}" ]; then echo "# Enable video camera" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "start_x=1" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # Offline compositing support if [ -n "${DISPMANX_OFFLINE}" ]; then echo "# Enable offline compositing" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "dispmanx_offline=1" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # SPI bus support if [ -n "${ENABLE_SPI_BUS}" ] || [ "${PITFT}" = "1" ]; then echo "# Enable SPI bus" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "dtparam=spi=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # I2C support if [ -n "${ENABLE_I2C}" ] || [ "${PITFT}" = "1" ]; then echo "# Enable I2C" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "dtparam=i2c1=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "dtparam=i2c_arm=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # PiTFT22 display support if [ "${PITFT22}" = "1" ]; then echo "# Enable PITFT22 display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "dtoverlay=pitft22,rotate=270,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ "${PITFT28r}" = "1" ]; then echo "# Enable PITFT28r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "dtoverlay=pitft28-resistive,rotate=90,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi if [ "${PITFT35r}" = "1" ]; then echo "# Enable PITFT35r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "dtoverlay=pitft35-resistive,rotate=90,speed=42000000,fps=20" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # UART support if [ "${ENABLE_UART}" = "1" ]; then echo "# Enable UART" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "enable_uart=1" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # VC4 Graphics support if [ "${VC4GRAPHICS}" = "1" ]; then echo "# Enable VC4 Graphics" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "dtoverlay=${VC4DTBO}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # Waveshare "C" 1024x600 7" Rev2.1 IPS capacitive touch (http://www.waveshare.com/7inch-HDMI-LCD-C.htm) if [ "${WAVESHARE_1024X600_C_2_1}" = "1" ]; then echo "# Waveshare \"C\" 1024x600 7\" Rev2.1 IPS capacitive touch screen" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "max_usb_current=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "hdmi_group=2" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "hdmi_mode=87" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "hdmi_cvt 1024 600 60 6 0 0 0" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "hdmi_drive=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # DWC2 USB peripheral support if [ "${ENABLE_DWC2_PERIPHERAL}" = "1" ]; then echo "# Enable USB peripheral mode" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "dtoverlay=dwc2,dr_mode=peripheral" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # AT86RF23X support if [ "${ENABLE_AT86RF}" = "1" ]; then echo "# Enable AT86RF23X" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "dtoverlay=at86rf233,speed=3000000" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # ENABLE CAN if [ "${ENABLE_CAN}" = "1" ]; then echo "# Enable CAN" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "dtoverlay=mcp2515-can0,oscillator=16000000,interrupt=25" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt fi # Append extra config if the user has provided any printf "${RPI_EXTRA_CONFIG}\n" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt } do_deploy_append_raspberrypi3-64() { echo "# have a properly sized image" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "disable_overscan=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "# Enable audio (loads snd_bcm2835)" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt echo "dtparam=audio=on" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt } addtask deploy before do_build after do_install do_deploy[dirs] += "${DEPLOYDIR}/bcm2835-bootfiles" PACKAGE_ARCH = "${MACHINE_ARCH}"