1 files changed, 54 insertions, 0 deletions
diff --git a/meta-raspberrypi/conf/machine/raspberrypi3-64.conf b/meta-raspberrypi/conf/machine/raspberrypi3-64.conf
new file mode 100644
index 000000000..5163320da
--- /dev/null
+++ b/meta-raspberrypi/conf/machine/raspberrypi3-64.conf
@@ -0,0 +1,54 @@
+#@TYPE: Machine
+#@NAME: RaspberryPi 3 Development Board
+#@DESCRIPTION: Machine configuration for the RaspberryPi 3 in 64 bits mode
+
+MACHINEOVERRIDES = "raspberrypi3:${MACHINE}"
+
+MACHINE_EXTRA_RRECOMMENDS += "\
+    linux-firmware-bcm43430 \
+    linux-firmware-bcm43455 \
+    linux-firmware-bcm43430a1-hcd \
+    linux-firmware-bcm4345c0-hcd \
+"
+
+require conf/machine/include/arm/arch-armv8.inc
+include conf/machine/include/rpi-base.inc
+
+KERNEL_DEVICETREE = " \
+    broadcom/bcm2710-rpi-3-b.dtb \
+    broadcom/bcm2710-rpi-3-b-plus.dtb \
+    broadcom/bcm2837-rpi-3-b.dtb \
+    \
+    overlays/hifiberry-amp.dtbo \
+    overlays/hifiberry-dac.dtbo \
+    overlays/hifiberry-dacplus.dtbo \
+    overlays/hifiberry-digi.dtbo \
+    overlays/i2c-rtc.dtbo \
+    overlays/iqaudio-dac.dtbo \
+    overlays/iqaudio-dacplus.dtbo \
+    overlays/lirc-rpi.dtbo \
+    overlays/pitft22.dtbo \
+    overlays/pitft28-resistive.dtbo \
+    overlays/pitft35-resistive.dtbo \
+    overlays/pps-gpio.dtbo \
+    overlays/rpi-ft5406.dtbo \
+    overlays/w1-gpio.dtbo \
+    overlays/w1-gpio-pullup.dtbo \
+    overlays/pi3-disable-bt.dtbo \
+    overlays/pi3-miniuart-bt.dtbo \
+    overlays/vc4-kms-v3d.dtbo \
+    overlays/vc4-fkms-v3d.dtbo \
+    "
+
+SERIAL_CONSOLE ?= "115200 ttyS0"
+VC4_CMA_SIZE ?= "cma-256"
+
+UBOOT_MACHINE = "rpi_3_config"
+MACHINE_FEATURES_append = " vc4graphics"
+
+# When u-boot is enabled we need to use the "Image" format and the "booti"
+# command to load the kernel
+KERNEL_IMAGETYPE_UBOOT ?= "Image"
+# "zImage" not supported on arm64 and ".gz" images not supported by bootloader yet
+KERNEL_IMAGETYPE_DIRECT ?= "Image"
+KERNEL_BOOTCMD ?= "booti"