AST2500: Initial AST2500 BSP layer

The AST2500 is an ARM SOC made by Aspeed.

This is only a stub; there are a couple missing bits of support
from the kernel/uboot.

Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>

1 files changed, 24 insertions, 0 deletions

diff --git a/meta-openbmc-bsp/meta-aspeed/meta-ast2500/recipes-bsp/u-boot/files/fw_env.config b/meta-openbmc-bsp/meta-aspeed/meta-ast2500/recipes-bsp/u-boot/files/fw_env.config
new file mode 100644
index 000000000..978e4d6e5
--- /dev/null
+++ b/meta-openbmc-bsp/meta-aspeed/meta-ast2500/recipes-bsp/u-boot/files/fw_env.config
@@ -0,0 +1,24 @@
+# Configuration file for fw_(printenv/setenv) utility.
+# Up to two entries are valid, in this case the redundant
+# environment sector is assumed present.
+# Notice, that the "Number of sectors" is ignored on NOR and SPI-dataflash.
+# Futhermore, if the Flash sector size is ommitted, this value is assumed to
+# be the same as the Environment size, which is valid for NOR and SPI-dataflash
+
+# NOR example
+# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
+#/dev/mtd1		0x0000		0x20000		0x20000
+#/dev/mtd2		0x0000		0x4000		0x4000
+
+# MTD SPI-dataflash example
+# MTD device name	Device offset	Env. size	Flash sector size	Number of sectors
+#/dev/mtd2		0x00000		0x20000
+/run/fw_env		0x00000		0x20000
+#/dev/mtd5		0x4200		0x4200
+#/dev/mtd6		0x4200		0x4200
+
+# NAND example
+#/dev/mtd0		0x4000		0x4000		0x20000			2
+
+# Block device example
+#/dev/mmcblk0		0xc0000		0x20000