1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
|
* Marvell MMP I2C controller
Required properties :
- reg : Offset and length of the register set for the device
- compatible : should be "mrvl,mmp-twsi" where mmp is the name of a
compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
as shown in the example below.
Recommended properties :
- interrupts : the interrupt number
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device. If the parent is the default
interrupt controller in device tree, it could be ignored.
- mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
status register of i2c controller instead.
- mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
Examples:
twsi1: i2c@d4011000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4011000 0x1000>;
interrupts = <7>;
mrvl,i2c-fast-mode;
};
twsi2: i2c@d4025000 {
compatible = "mrvl,mmp-twsi";
reg = <0xd4025000 0x1000>;
interrupts = <58>;
};
* Marvell MV64XXX I2C controller
Required properties :
- reg : Offset and length of the register set for the device
- compatible : Should be "marvell,mv64xxx-i2c"
- interrupts : The interrupt number
- clock-frequency : Desired I2C bus clock frequency in Hz.
Examples:
i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
interrupts = <29>;
clock-frequency = <100000>;
};
|
